Connectivity and networking

Transcription

1 6 Connectivity and networking In the last chapter we learned about tuning and optimizing our BizTalk 2010 Environment. In this chapter we will learn about connectivity and networking. Since connectivity and networking is such a broad subject, we will only discuss a few essential topics. The following topics will be discussed: IIS Configuration o Application Pool advanced settings o Securing BizTalk WCF Services Windows Azure AppFabric Connectivity Adapters o Windows SharePoint Services o Microsoft BizTalk Adapter Pack o Line of Business o Third-Party IIS Configuration Application Pool Advanced Settings Configuration An application pool defines a group of one or more worker processes, configured with common settings that serve requests to one or more applications that are assigned to that application pool. Because application pools allow a set of Web applications to share one or more similarly configured worker processes, they provide a convenient way to isolate a set of Web applications from other Web applications on the server computer. Process boundaries separate each worker process; therefore, application problems in one application pool do not affect Web sites or applications in other application pools.

2 Application pools significantly increase both the reliability and manageability of your Web infrastructure. You can choose to use the default application pool provided by IIS on install, or you can create your own application pool. You can run as many application pools on your IIS 7 server as you need, though this can affect server performance. Application pools can contain one or more worker processes. Each worker process represents work being done for a Web site, Web application, or Web service Application Pool Identities Application Pool Identities allow you to run Application Pools under a unique account without having to create and manage domain or local accounts. The name of the Application Pool account corresponds to the name of the Application Pool. The image below shows an IIS worker process (W3wp.exe) running as the DefaultAppPool identity. Application Pool Identity Accounts Worker processes in IIS 6.0 and IIS 7 run as NETWORKSERVICE by default. NETWORKSERVICE is a built-in Windows identity. It doesn't require a password and has only user privileges; that is, it is relatively low-privileged. Running as a lowprivileged account is a good security practice because then a software bug can't be used by a malicious user to take over the whole system. However, a problem arose over time as more and more Windows system services started to run as NETWORKSERVICE. This is because services running as NETWORKSERVICE can tamper with other services that run under the same identity. 2

3 Because IIS worker processes run third-party code by default (Classic ASP, ASP.NET, PHP code), it was time to isolate IIS worker processes from other Windows system services and run IIS worker processes under unique identities. The Windows operating system provides a feature called "Virtual Accounts" that allows IIS to create unique identities for each of its Application Pools. Click here for more information about Virtual Accounts. Configuring IIS Application Pool Identities If you are running IIS 7.5 on Windows Server 2008 R2, you don't have to do anything to use the new identity. For every Application Pool you create, the IIS Admin Process (WAS) will create a virtual account with the name of the new Application Pool and run the Application Pool's worker processes under this account. Securing Resources Whenever a new Application Pool is created, the IIS management process creates a security identifier (SID) that represents the name of the Application Pool itself. For example, if you create an Application Pool with the name "MyNewAppPool," a security identifier with the name "MyNewAppPool" is created in the Windows Security system. From this point on, resources can be secured by using this identity. However, the identity is not a real user account; it will not show up as a user in the Windows User Management Console. You can try this by selecting a file in Windows Explorer and adding the "DefaultAppPool" identity to the file's Access Control List (ACL). 1. Open Windows Explorer 2. Select a file or directory. 3. Right click the file and select "Properties" 4. Select the "Security" tab 5. Click the "Edit" and then "Add" button 6. Click the "Locations" button and make sure you select your machine. 7. Enter "IIS AppPool\DefaultAppPool" in the "Enter the object names to select:" text box. 8. Click the "Check Names" button and click "OK". By doing this, the file or directory you selected will now also allow the DefaultAppPool" identity access. 3

4 You can do this via the command-line by using the ICACLS tool. The following example gives full access to the DefaultAppPool identity. ICACLS test.txt /grant "IIS AppPool\DefaultAppPool":F On Windows Server 2008 R2, the default is to run Application Pools as the Application Pool Identity. To make this happen, a new identity type with the name "AppPoolIdentity" was introduced. If the "AppPoolIdentity" identity type is selected (the default on Windows 7 and Windows Server 2008 R2), IIS will run worker processes as the Application Pool identity. With every other identity type, the security identifier will only be injected into the access token of the process. If the identifier is injected, content can still be ACLed for the AppPool identity, but the owner of the token is probably not unique. Accessing the Network Using the NETWORKSERVICE account in a domain environment has a great benefit. Worker process running as NETWORKSERVICE access the network as the machine account. Machine accounts are generated when a machine is joined to a domain. They look like this: <domainname>\<machinename>$, The nice thing about this is that network resources like file shares or SQL Server databases can be ACLed to allow this machine account access. 4

5 Windows Azure AppFabric Connectivity AppFabric Connect BizTalk Server 2010 AppFabric Connect for Services One of the key requirements in development of cloud based applications is to be able to leverage existing on-premise assets by exposing them as web services. However, since most of the organizations are firewall protected, the on-premise web services are typically not accessible to external clients running outside the organization s firewall, unless these web services are explicitly hosted in DMZ. More often than not, hosting services in the DMZ is a cumbersome process. Azure AppFabric Service Bus provides the capability to extend the reach of on-premise web services to external clients (without having to host them in the DMZ) in a secure way. Feature Overview The new BizTalk Server 2010 AppFabric Connect for Services feature brings together the capabilities of BizTalk Server and Windows Azure AppFabric thereby enabling enterprises to extend the reach of their on-premise Line of Business (LOB) systems and BizTalk applications to cloud. 5

6 Business scenario With the advent of cloud platforms and people building cloud based applications, it is still true that a lot of data for these applications resides in on-premise LOB systems. More often than not, these applications would also want to leverage existing on-premise applications. To build such hybrid applications with components residing on-premise as well as on cloud, a secure mechanism to connect an enterprise s on-premise assets with those on cloud is the need of the hour. While this is true for any applications, it is even truer for integration applications. The following fictional scenario illustrates this better: Woodgrove bank wants to build an online banking portal where its customers can view their bank or stock related information, and trade their stocks. The data needed for this portal resides in on-premise LOB systems. The stock trading functionality is implemented using a BizTalk Server Orchestration. The bank has also designed an ASP.Net based web portal and hosted it in Windows Azure. To enable communication between the cloud based web portal and the on-premise assets, the bank exposes the onpremise LOB data and the BizTalk solution as WCF services with endpoints in Azure AppFabric Service Bus. 6

7 Security considerations when exposing on-premise assets on cloud: Security is an important requirement when exposing on-premise assets on cloud. Azure AppFabric Service Bus endpoints can be secured using Azure AppFabric ACS. A more detailed description of how to secure Service Bus endpoints is here. On top of this, the regular WCF security features such as transport level and message level security can be used to secure end-to-end communication between the client and the service. BizTalk WCF Adapter for Windows Azure Storage Services The BizTalk WCF Adapter for Windows Azure Storage Services enables communication between.net framework applications and Windows Azure Storage Queues and Blobs. The current version includes support for PutMessage, ClearMessages outbound operations and GetMessage inbound operation on Azure Queues as well as for AddBlob, DeleteBlob outbound operations and GetBlob inbound operation on Azure Blobs. Also implemented is a basic polling strategy with PollingIntervalInSeconds value. The adapter was created by Jérémie Devillard and Maxime Labelle and is available on CodePlex Adapters Windows SharePoint Services Adapter The BizTalk 2010 SharePoint Adapter can be configured using the BizTalk 2010 Configuration Tool. Before we can install and configure the adapter we must first install the prerequisite. The figure below shows the prerequisite. 7

8 Depending on the functionality we require, we can install either SharePoint Services 3.0 SP 2 or SharePoint Foundation More information can be found on In addition, a new Domain group, typically called SharePoint Enabled Hosts needs to be created. Both the Domain BizTalk Service and SharePoint Service Accounts are added to this group. Both SharePoint Services 3.0 SP 2 or SharePoint Foundation 2010 create a new SharePoint Site using Port 80. We will need to use the SharePoint Central Administration to remove this site. We then add new site using a different Port number. Once this has been completed we can Install and Configure the Windows SharePoint Services Adapter as shown in the figure below. 8

9 Microsoft BizTalk Adapter Pack WCF LOB Adapter for mysap Business Suite Like all the WCF LOB Adapters, they can be configured both at design-time and runtime. In this section we will discuss run-time configuration. 9

10 Since the setup and install includes the.net Framework Data Provider for mysap Business Suite, we do not have to worry about it s installation. In order to perform any operation on a SAP System, the clients that use the adapter must have access to the relevant Remote Function Calls (RFC), Business Application Programming Interfaces (BAPIs), and IDOCs (or intermediate documents). The included.net Framework Data Provider for mysap Business Suite provides an ADO Interface to the SAP System. SAP Binding Properties To configure the adapter at run-time we need to set the proper properties that appear the Send Port and Receive Location Dialog Boxes. The following tables show the Node Properties that appears in the dialog boxes. General Node Properties Binding Property CloseTimeout DataTypesBehavior Description Specifies the WCF connection close timeout. The default is 1 minute. The SAP system does not enforce correct values to be specified for DATS, TIMS, and NUMC fields. So, if invalid values are present in the SAP data store for DATS, TIMS, and NUMC fields and a client program tries to read the values using the SAP adapter, the adapter throws an exception. Also, the SAP system has special values for representing minimum and maximum values for the DATS, TIMS, and NUMC fields for which there is no equivalent.net type. For example, the minimum and maximum values for a DATS field are and respectively, for which there is no equivalent.net type DateTime. Moreover, converting the minimum and maximum values for DATS fields to DateTime.MinValue and DateTime.Max value is not feasible because the minimum or maximum value for DATS field and minimum or maximum value for a.net DateTime type are not the same. To enable adapter clients to control the adapter behavior when special values are encountered in the SAP system, you can set the DataTypesBehavior binding property. This is a complex binding property that has the following sub-properties. 10

11 DateTimeMaxToDats DateTimeMaxToTims Specifies the behavior the adapter should follow to send a DATS value when the adapter client sends the value DateTime.MAX, which is T23:59: You could set this to the following values. ERROR. When set to this, the adapter throws an error if the client program sends the DateTime.MAX value. <VALUE>. When set to this, the adapter sends the specified value to SAP if the client program sends the DateTime.MAX value. Default is Specifies the behavior the adapter should follow to send a TIMS value when the adapter client sends the value DateTime.MAX, which is T23:59: You could set this to the following values. ERROR. When set to this, the adapter throws an error if the client program sends the DateTime.MAX value. <VALUE>. When set to this, the adapter sends the specified value to SAP if the client program sends the DateTime.MAX value. 11

12 Default is DateTimeMinToDats DateTimeMinToTims Specifies the behavior the adapter should follow to send a DATS value when the adapter client sends the value DateTime.MIN, which is T00:00:00. You could set this to the following values. ERROR. When set to this, the adapter throws an error if the client program sends the DateTime.MIN value. <VALUE>. When set to this, the adapter sends the specified value to SAP if the client program sends the DateTime.MIN value. Default is Specifies the behavior the adapter should follow to send a TIMS value when the adapter client sends the value DateTime.MIN, which is T00:00:00. You could set this to the following values. ERROR. When set to this, the adapter throws an error if the client program sends the DateTime.MIN value. <VALUE>. When set to this, the adapter sends the specified value to SAP if the client program sends the DateTime.MIN value. Default is

13 DateTimeNullToDats DateTimeNullToTims Specifies the behavior the adapter should follow to send a DATS value when the adapter client sends a NULL DateTime value. You could set this to the following values. ERROR. When set to this, the adapter throws an error if the client program sends a NULL DateTime value. SKIP. When set to this, the adapter skips the field and does not send any value to SAP if the client program sends a NULL DateTime value. <VALUE>. When set to this, the adapter sends the specified value to SAP if the client program sends a NULL DateTime value. Default is SKIP. Specifies the behavior the adapter should follow to send a TIMS value when the adapter client sends a NULL DateTime value. You could set this to the following values. ERROR. When set to this, the adapter throws an error if the client program sends a NULL DateTime value. SKIP. When set to this, the adapter skips the field and does not send any value to SAP if the client program sends a 13

14 NULL DateTime value. <VALUE>. When set to this, the adapter sends the specified value to SAP if the client program sends a NULL DateTime value. Default is SKIP. DatsMaxToDateTime DatsMinToDateTime Specifies the behavior the adapter should follow to retrieve a DateTime value when the adapter receives a DATS.MAX value, which is , from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives a DATS.MAX value from SAP. NULL. When set to this, the adapter returns NULL if it receives a DATS.MAX value from SAP. <VALUE>. When set to this, the adapter parses the specified value in the XSD:DateTime format and returns it to the client program. Default is ERROR. Specifies the behavior the adapter should follow to retrieve a DateTime value when the adapter receives a DATS.MIN value, which is , from SAP. You could set this to 14

15 the following values. ERROR. When set to this, the adapter throws an error if it receives a DATS.MIN value from SAP. NULL. When set to this, the adapter returns NULL if it receives a DATS.MIN value from SAP. <VALUE>. When set to this, the adapter parses the specified value in the XSD:DateTime format and returns it to the client program. Default is ERROR. EmptyDatsToDateTime Specifies the behavior the adapter should follow to retrieve a DateTime value when the adapter receives an empty DATS value from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives an empty DATS value from SAP. NULL. When set to this, the adapter returns NULL if it receives an empty DATS value from SAP. <VALUE>. When set to this, the adapter parses the specified value in the XSD:DateTime format and returns it to the client program. Default is

16 01T00:00:00. EmptyNumcToInt EmptyTimsToDateTime Specifies the behavior the adapter should follow to retrieve an integer value when the adapter receives an empty NUMC value (all spaces) from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives an empty NUMC value from SAP. NULL. When set to this, the adapter returns NULL if it receives an empty NUMC value from SAP. <VALUE>. When set to this, the adapter assumes that the specified value is a valid Int32 or Int64 value and returns it to the client program. Default is 0. Specifies the behavior the adapter should follow to retrieve a DateTime value when the adapter receives an empty TIMS value from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives an empty TIMS value from SAP. NULL. When set to this, the adapter returns 16

17 NULL if it receives an empty TIMS value from SAP. <VALUE>. When set to this, the adapter parses the specified value in the XSD:DateTime format and returns it to the client program. Default is T00:00:00. InvalidDatsToDateTime InvalidNumcToInt Specifies the behavior the adapter should follow to retrieve a DateTime value when the adapter receives an invalid DATS value from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives an invalid DATS value from SAP. NULL. When set to this, the adapter returns NULL if it receives an invalid DATS value from SAP. <VALUE>. When set to this, the adapter parses the specified value in the XSD:DateTime format and returns it to the client program. Default is ERROR. Specifies the behavior the adapter should follow to retrieve an integer value when the adapter receives an invalid NUMC value 17

18 18 TimsMaxToDateTime from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives an invalid NUMC value from SAP. NULL. When set to this, the adapter returns NULL if it receives an invalid NUMC value from SAP. <VALUE>. When set to this, the adapter assumes that the specified value is a valid Int32 or Int64 value and returns it to the client program. Default is 0. Specifies the behavior the adapter should follow to retrieve a DateTime value when the adapter receives a TIMS.MAX value from SAP. You could set this to the following values. ERROR. When set to this, the adapter throws an error if it receives a TIMS.MAX value from SAP. NULL. When set to this, the adapter returns NULL if it receives a TIMS.MAX value from SAP. <VALUE>. When set to this, the adapter parses the specified value in the XSD:DateTime format and returns it to

19 the client program. Default is ERROR. Name OpenTimeout ReceiveTimeout SendTimeout EnableBizTalkCompatiblityMo de EnablePerformanceCounters Not supported. Specifies the WCF connection open timeout. The default is 1 minute. Specifies the WCF message receive timeout. Essentially, this means the maximum amount of time the adapter waits for an inbound message. The default is 10 minutes. Specifies the WCF message send timeout. The default is 1 minute. Specifies whether the BizTalk Layered Channel Binding Element should be loaded. The BizTalk Layered Channel Binding Element is loaded to enable BizTalk transactions to flow through the SAP adapter to the SAP system. Set this to true to load the binding element. Otherwise, set this to false. When using the adapters from BizTalk Server, you must always set the property to true. When using the adapters from Visual Studio, you must always set the property to false. Specifies whether to enable the WCF LOB Adapter SDK performance counters and the SAP adapter LOB Latency performance counter. The default is false; performance counters are disabled. The LOB Latency performance counter measures the total time spent by the SAP adapter in making calls to the SAP system. Note EnablePerformanceCounters is a static property within an application domain (app domain) for the WCF LOB Adapter SDK performance counters, but it is an instance property for the adapter's LOB Latency performance counter. This means that changing EnablePerformanceCounters for a binding instance in an app domain will: enable or disable the WCF LOB Adapter SDK performance counters for all objects created from all binding instances within the same app domain. enable or disable the adapter's LOB Latency 19

20 performance counter only for objects created from that binding instance after the change is made. BizTalk Node Properties Binding Property EnableBizTalkCompatiblityMode Description Specifies whether the BizTalk Layered Channel Binding Element should be loaded. The BizTalk Layered Channel Binding Element is loaded to enable BizTalk transactions to flow through the SAP adapter to the SAP system. Set this to true to load the binding element. Otherwise, set this to false. When using the adapters from BizTalk Server, you must always set the property to true. When using the adapters from Visual Studio, you must always set the property to false. Bapi Node Properties Binding Property EnableBusinessObjects Description This property is deprecated. The adapter always displays the BAPI node when browsing the metadata using the Add Adapter Service Reference Plug-in or the Consume Adapter Service Add-in. The behavior is the same as setting EnableBusinessObjects to true in BizTalk Adapter Pack version 1.0. For more information about the EnableBusinessObjects binding property in BizTalk Adapter Pack version 1.0, see Connection Node Properties Binding Property EnableConnectionPooling 20 Description Specifies whether the SAP adapter connection pool is enabled. The default is true, which specifies that the connection

21 pool is enabled. IdleConnectionTimeout MaxConnectionsPerSystem RfcAllowStartProgram Specifies the SAP adapter idle connection timeout. When a connection in the pool is idle (unused) for a period that exceeds this timeout, the connection will be disposed. The default is 15 minutes. The idle connection timeout only applies to connections in the pool that are not being used. It does not affect active (open) connections which may be waiting for data. Specifies the maximum number of connections in the SAP adapter connection pool. The default is 50. MaxConnectionsPerSystem is a static property within an application domain. This means that when you change MaxConnectionsPerSystem for one binding instance in an application domain, the new value applies to all objects created from all binding instances within that application domain. Important By default, the SAP client library (librfc32u.dll) supports a maximum of 100 connections to the SAP system. If you exceed this number of connections, an exception will be thrown by the SAP adapter. For this reason, you should not set MaxConnectionsPerSystem to a value greater than the number of connections supported by the SAP client library. You can increase the number of connections that the SAP client library supports by setting the environment variable, CPIC_MAX_CONV. You must reboot your computer after setting this variable for the change to take effect. Specifies the external programs that the RFC client library can start, if required by an RFC partner. For example, if you are invoking an RFC that internally invokes a program on the computer running the adapter client, you must specify the name of that program for this binding property. 21

22 If you are specifying multiple programs for this binding property, they must be separated by a semi-colon. For example, if you want to specify the sapftp and saphttp programs, you must specify them as sapftp;saphttp. Also, make sure the following conditions are met: The external program required by the RFC is available on the computer running the adapter client. The location of the external program is present in the PATH variable on the computer running the adapter client. For example, BAPI_DOCUMENT_CHECKOUTVIEW2 internally executes a program, sapftp. So, while invoking this RFC, you must set the RfcAllowStartProgram binding property to sapftp. You must also ensure that the sapftp program is available locally, and the location of the sapftp program is added to the PATH variable on the computer running the adapter client. Diagnostics Node Properties Binding Property EnablePerformanceCounters Description Specifies whether to enable the WCF LOB Adapter SDK performance counters and the SAP adapter LOB Latency performance counter. The default is false; performance counters are disabled. The LOB Latency performance counter measures the total time spent by the SAP 22

23 adapter in making calls to the SAP system. Idoc Node Properties Binding Property AutoConfirmSentIdocs PadReceivedIdocWithSpaces Description Specifies whether the SAP adapter autocommits trfc client calls used for sending IDocs. The default is false; auto-commit is disabled. If auto-commit is disabled, the client application must explicitly commit the trfc call by invoking the RfcConfirmTransID operation. The RfcConfirmTransID operation is a special operation surfaced by the SAP adapter. It appears under the TRFC node when you use the Add Adapter Service Reference Visual Studio Plug-in or the Consume Adapter Service BizTalk Project Add-in. Specifies whether each line returned by the ReceiveIdoc operation is padded with spaces to the correct length. The default is false; lines are not padded. Metadata Node Properties Binding Property EnableSafeTyping FlatFileSegmentIndicator Description Enables or disables safe typing. The default is false; safe typing is disabled. This feature controls how the adapter surfaces certain SAP data types Specifies whether the <appinfo> tag should contain segment types or segment definitions for parsing flat file IDocs. Note that the XML schema elements, however, should always contain segment definition names only. There are two possible values for the FlatFileSegmentIndicator property: SegmentDefinition indicates that the flat files should contain the Segment Definition for each 23

24 GenerateFlatfileCompatibleIdocSchema ReceiveIDocFormat Segment in the IDoc. SegmentType indicates that the flat files should contain the Segment Type for each Segment in the IDoc. The default is SegmentDefinition. Specifies whether flat file <appinfo> tags should be added to the IDoc message schema. This is required by the BizTalk flat file parser. The default is true, which specifies that <appinfo> tags will be added to the schema. Specifies the XML format of the messages dispatched by the SAP adapter to the client application on the inbound side (SAP to adapter). There are three possible values for the ReceiveIDocFormat property: String specifies that the IDoc message should be represented as a single, string field in the WCF message. Typed specifies that the IDoc message should be parsed and represented as a stronglytyped WCF message. Rfc specifies that the SAP adapter should pass the incoming RFC call as a WCF message with RFC parameters. The default is Typed. SNC Node Properties Binding Property SncLibrary Description Specifies the location of the SNC library on your computer. If the PATH environment variable contains the directory in which the library resides, you only have to supply the filename of the library; otherwise you must supply the full path. The SncLibrary binding property surfaces an SAP connection 24

25 property. You must set the UseSnc parameter in the connection URI to enable Secure Network Communications (SNC). SncPartnerName Specifies the SNC partner name. The SncPartnerName binding property surfaces an SAP connection property You must set the UseSnc parameter in the connection URI to enable Secure Network Communication (SNC). TrfcServer Node Properties Binding Property TidDatabaseConnectionString Description Specifies the database connection string for the SQL Server database that the SAP adapter uses to store Transaction Ids (TIDs). The BizTalk Adapter Pack setup wizard installs some SQL scripts that must be run by the SQL Server administrator against an existing database to create the SQL Server objects that are used by the adapter to store TIDs to enable inbound transactional RFC (trfc) server calls. For more information about the SQL scripts, refer to the BizTalk Adapter Pack installation guide available at <installation drive>:\program Files\Microsoft BizTalk Adapter Pack\Documents. You must set this property to enable inbound trfc server calls for receiving IDocs or RFCs from SAP. The default is null; trfc server calls are not enabled. You can specify the connection string in the following format: Data Source=<myServerAddress>;Initial Catalog=<myDataBase>;User Id=<myUsername>;Password=<myPassword>; To specify the connection string, click the ellipsis button ( ) against the binding property and enter the values for the required connection string properties. 25

26 Additional information is available in the Microsoft BizTalk Adapter 2010 Documentation. Line of Business Adapters Beside the WCF LOB SDK Adapters, BizTalk 2010 includes serveral Line of Business Adapters. These adapters provide connectivity with several Enterprise Resource Planning (ERP) systems. The following are the adapters included: JD Edwards OneWorld XE JD Edwards EnterpriseOne Tibco Rendezvous Tibco Enterprise Message Service PeopleSoft Enterprise Configuration The configuration of the Line of Business Adapters hasn t changed much in BizTalk The configuration settings are set using the adapters Transport Properties dialog box. The settings for the adapter is as follows. JD Edwards OneWorld XE We use the JD Edwards OneWorld Transport Properties dialog box when setting the required properties. Additional information is available at The following table describes how to set the properties. Property Step Adapter Required Properties Host JAVA_HOME JDEdwards Environment JDEdwards JAR files 26 Provide the name or IP address. Provide the complete path to your JDK installation. Provide the name of an environment in JD Edwards OneWorld. Provide the complete path and file name

27 Password Port User name for each of the JAR files. Provide the user password. Provide the Port Number. Provide the user name. Max Concurrent Calls The default value is 5. Refresh Agent Affiliate Application Use SSO Select Yes if you want the process to restart automatically if it loses coonection with the server. If you are using SSO, select the affiliate application Select Yes if you are using SSO. JD Edwards EnterpriseOne We use the JD Edwards EnterpriseOne Transport Properties dialog box when setting the required properties.. Additional information is available at The following table describes how to set the properties. Property Adapter Required Properties Host JAVA_HOME JDEdwards Environment JDEdwards JAR files Password Port User name Bootstrap Data Source Required Properties Data Source Name Database Owner Database Server Name Step Provide the name or IP address. Provide the complete path to your JDK installation. Provide the name of an environment in JD Edwards OneWorld. Provide the complete path and file name for each of the JAR files. Provide the user password. Provide the Port Number. Provide the user name. Provide the name of the data source. Provide the name of the database owner. Provide the name of the database server. 27

28 Database Server Port Database Type Physical Database Name Concurrency Control Provide the database server port number. Provide a single character for the database type. Max Concurrent Calls The default value is 5 Refresh Agent Refresh Agent Security Server Security Server Name Service Name Connect Single Sing-On Affiliate Application Use SSO Provide the name of the physical database. Select Yes if you want the process to restart automatically if it loses coonection with the server. Provide the name of the security server. Provide the port number used by the security server. Default is the JD Edwards server port. If you are using SSO, select the affiliate application Select Yes if you are using SSO. Tibco Rendezvous We use the Tibco Rendezvous Send Transport Properties dialog box when setting the required properties for sending messages.. Additional information is available at The following table describes how to set these properties. Property Certified Sender Properties Ledger file name Reusable name Credentials Password User name Step Defaults to blank Defaults to blank. This is only used for certified message delivery. Defaults to blank. Defaults to blank. 28

29 General Settings Code page number Defaults to Default subject name Enable Time Batch Map unsupported types to string Path to Binaries Preserve order Send port identifier Defaults to blank Defaults to False Defaults to True Provide if not already in PATH environmental variable. Defaults to True Appears in log messages associated with this port. We use the Tibco Rendezvous Receive Transport Properties dialog box when setting the required properties for receiving messages.. Additional information is available at The following table describes how to set these properties. Property Adapter required properties Rendezvous subject name Step Provide the subject name that the adapter listens for. Certified Listener Properties Ledger file name Reuable name Distributed Queue Settings Activation Interval Defaults to blank Heart Beat Interval Defaults to 10 Scheduler Weight Policy Defaults to blank. Only required to survive a process being restarted. Defaults to 20 seconds. Time interval without a heart beat message from the scheduler. Defaults to blank Worker Capacity Policy Defaults to 1 Worker Weight Policy Defaults to 1 General Settings 29

30 Appendix wildcard substitute Specify a wildcard text substitute. Code Page Number Default is Element wildcard substitute Event Queue Name Filter Map unsupported types to string Member of BizTalk group Receive Location Identifier Reserved Specify a different wildcard text substitute. Specify a name to use when you are creating the Rendezvous Queue object. Default to blank. Default to blank. Defaults to True Defaults to False Provide the name of receive location For special use. Tibco Enterprise Message Service We use the Enterprise Message Service Transport Receive Properties dialog box when setting the required properties for the Receive Port.. Additional information is available at The following table describes how to set the properties. Property System Definition - Required URL Step Provide the URL. Target namespace Provide the Target Namespac e. Message Handling Message Selector Messages are received only if this string evaluates to True with the message in the destination. Retry Count Defaults to 0. Retry Interval Server Connection Definition Destination - Required Port Number Defaults to 5 minutes Provide the name and type of the destination. Provide the TIBCO EMS Server listener 30

31 port number. Server Name - Required Use Single Sign-On Affiliate application User Credentials Password User Name Provide the name of the system hosting the TIBCO EMS Server. Select Yes if you are using SSO. If you are using SSO, select the affiliate application Provide if not using SSO Provide if not using SSO We use the Enterprise Message Service Transport Send Properties dialog box when setting the required properties for the Send Port.. Additional information is available at The following table describes how to set the properties. Property Step System Definition - Required Destination Port Number Server Name Message Handling Message Expiration Time Message is Persistant Defines the name and type of the destination Port on which the TIBCO EMS server listens Mandatory setting. Name of the system hosting the TIBCO EMS server. An integer that describes the length of time the message stays on the queue or topic; after the time expires, the message is deleted by the TIBCO EMS server. Defaults to 0 milliseconds. Defaults to True. Message Priority Defaults to 4 Server Connection Definition Destination - Required Provide the name and type of the 31

32 Port Number Server Name - Required Use Single Sign-On Affiliate application User Credentials Password User Name destination. Provide the TIBCO EMS Server listener port number. Provide the name of the system hosting the TIBCO EMS Server. Select Yes if you are using SSO. If you are using SSO, select the affiliate application Provide if not using SSO Provide if not using SSO PeopleSoft Enterprise Adapter We use the PeopleSoft Transport Properies dialog box when setting the adapter-required properties. Additional information is available at The following table describes how to set the properties. Property Adapter Required Properties Application server path JAVA_HOME Password PeopleSoft 8.x JAR files User name Additional Parameters Database Date Format Concurrency Control Max Concurrent Calls Step Provide the path of the PeopleSoft Server. Type the name for the JAVA_HOME location. Provide the user password. Provide the path for the location of the PeopleSoft JAR files. Provide the user name. Provide the format you want dates to appear. Provide the number of calls. 32

33 Connection Maximum number of sessions Provide the maximum number of sessions. Defaults to 40. Refresh Agent Refresh Agent Select Yes if you want the process to restart automatically if it loses coonection with the server. Single Sign-On Affiliate Application Use SSO If you are using SSO, select the affiliate application Select Yes if you are using SSO. Third-Party Adapters /n Software The /n software Adapters for Microsoft BizTalk include fully-managed.net Adapters that seamlessly integrate with the BizTalk Messaging Pipeline. The /n software Adapters extend the features of BizTalk with advanced Internet communications and secure messaging capabilities. Community Edition The /n software Community Edition includes plain-text versions of same fully-managed.net Adapters and Pipeline Components found in our Enterprise Adapter suite. The Community Edition includes binaries for all of the Adapters found in both, and features are enabled based on the type of license installed. The Community Edition includes the following Adapters: FTP Adapter - Plain-text FTP Adapter with advanced firewall and proxy capabilities. Adapters - (SMTP/POP/IMAP) Adapter RSS Adapter - RSS Client integration Adapter. SNPP Adapter - Alphanumeric paging Adapter. XMPP Adapter - Jabber / XMPP Instant Messaging Adapter. Amazon S3 Adapter - Integration with Amazon Simple Storage Service (S3). More information on the use and configuration of these adapters can be found at 33

34 ODBC Adapter from Two-Connect BizTalk 2010 does not have an adapter for every Data Resource. We have a choice of either purchasing an Adapter, creating our own by using the WCF LOB SDK, or using the Community ODBC Adapter provided by TWOCONNECT TWOCONNECT has updated the open source ODBC Adapter made on GotDotNet several years ago, to work with BizTalk It has been updated to support the Net 4.0 Target and the Install Folder Path has been fixed for 64 Bit Systems According to TWOCONNECT: It has support for creating two way operations Can no longer be configured on a Request/Response Port Poll While Data Found option on Receive Location is supported. Performance Counters and Event Source created at install time. No longer requires Administrator rights at Runtime The adapter does have limitations and issues: When using Insert, Update, or Delete Table Operations, there is no return value. It only supports a one-way operation. You cannot use Output parameters in Stored Procedures To demonstrate the use of the Adapter, we have three scenarios. 1. Request\Response operation using a Select from a table. 2. Request operation using an Update on a table. 3. Request\Response operation using a stored procedure Before we can use the Adapter we need to install it. Installation is fairly straight forward. 34

35 1. We will have to manually add the Adapter to our BizTalk Environment as shown below: 2. We start off with creating a new 32 Bit Host and Host Instance as shown below: 35

36 3. We then assign our ODBC Host Instance to the ODBC Adapter s Send and Receive Handlers as shown below. Assign our ODBCHost to Send Handler Assign ODBCHost to Receive Handler 36

37 Setting our ODBC Data Source 1. Assuming that our BizTalk 2010 Environment is 64 bit, we will need to use the odbccad32.exe, which is located in C:\Windows\SysWOW32, to create your ODBC Data Source. 2. We create a new System Data Source as shown below 37

38 3. Clicking Add starts the Configuration Wizard. 4. Enter a name for our Data Source. 5. Select our SQL Server. 38

39 6. Click Next until you get to the page show below. 7. Check the Change the default database to: and select our PurchaseOrders Database. 8. Click Next again We can review our configuration as shown below. 39

40 9. Click on Test Data Source to test our connection as shown below. 40

41 10. If we configured everything correctly, we will see the results as show above. Scenarios Request\Response operation using a Select from a table Open Visual Studio 2010 and create a new BizTalk Application. Name it ODBC_Sample. 1. Next we will use the Add Adapter Metadata Wizard to generate our schemas and orchestration as shown below. 41

42 2. Select the ODBC Adapter as shown below: 3. Click Next. 4. Then enter our Target Namespace, Request and Response element root names as shown below. 42

43 5. Click Next. 6. We will be doing a simple Select Statement. Select SQL Script and click Next as shown below 7. On the Statement Information page, we set the Query Type to Select. 43

44 8. Next we will enter our Select Statement as shown below. 9. Next Click Generate. After a few seconds you will see two schemas and an orchestration in our project folder. Since we did a Select without a where clause, our generated schema is generic as shown below. 44

45 The Response Schema contains all the fields from our table. Looking at the Multipart Message Types, we can see that there is a problem with the Multi-part Message Types. (This is one of the issues in the Adapter) To correct this, we will need to re-assign the schemas to the Message Type 45

46 Another issue is that there are two ports created instead of one as shown below.(this is also an issue with the adapter). The solution to this issue is to delete the ODBCRequest and ODBCResponse Port Types and create a new Request-Response Port as shown below. 46

47 10. Next we need to add our Inbound Message. We are using the Request Message generated by the Adapter Wizard. 47

48 The following diagram shows our Port Binding. The completed Orchestration for our first demo is shown below. 48

49 Request operation using an Update on a table. We will need to repeat Steps 1 5 above. 6. In order to do an Update, we need to manually enter our Update Query into the Query Editor as shown below. 7. Before we click on Generate, we need to check the Override default query processing If we omit this step, all of our Input Parameters will default to an NVarChar Data Type with a field size of 1. Otherwise we would have to start all over again with Step 1. 49

50 8. We have to select each Parameter and set its Type and Field Size. Setting the Sample Data value is optional. 9. Once completed we click on Update Command. 50

51 10. This brings us back to the Schema Generation page. 11. We can now click on Generate. 12. This time we have one Schema and an Orchestration generated We also have the same issue with Multi-part Message Types. 1. We need to set the Message type to the correct schema 51

52 2. Our generated schema is shown below 3. As you can see the correct data types are set for each parameter. 52

53 4. Our Orchestration is similar to our first demo, the only exception being a Send Port instead of a Send\Receive Request\Response operation using a stored procedure 1. We create a new stored procedure as shown below. 53

54 2. Next we must follow Steps 1-5 as in the previous demos. 3. On the Statement Type page, we will select Stored Procedure. 4. On the Statement Information page, we enter its name as shown below. 54

55 5. Click Generate 6. This generates two schemas and an orchestration as shown below 55

56 7. Our Request Schema 56

57 8. Our Response Schema We still have the same issue with the Multipart Message Types. We set the correct schemas again. 57

58 Two Port Types are created. We need to delete these and create a new Request/Response Port 1. Creating our new Request/Response Port 58

59 2. We are sending a Request and Receiving a response 3. Our new Request\Response Port as show below. 4. Next we create our Orchestration as shown below 59

60 Because we are using a Stored Procedure that returns a value, we can add Exception Handling. In this case we are validating the result and throwing a System.Exception if the Stored Procedure returns an Error Code. Deployment We will need to create two Send Ports, a Static Request-Response for our Select Table Operation and Stored Procedure Demos, and a Static Request Port for our Update Table Operation. Creating Ports for the ODBC Adapter 1. Open the BizTalk 2010 Administration Console and add a new Application called ODBC Test as shown below. 60

61 2. After deploying our demos, we need to configure a Static Solicit-Response Send Port as shown below. 3. Since we are using Windows Authentication for our ODBC Data Sources, we uncheck Include UserID and Password as shown below. 61

62 4. We select our Data Source Name and click OK. 62

63 5. Our ODBC Transport Properties are set as shown below. 6. We will also need to create a static one-way port as shown below. 63

64 7. We configure the Send Port by setting our Connection String 8. We then click on the Connection String button. 64

65 9. We select our ODBC_Test Data Source as shown below 65

66 If our ODBC Data Source supports Transactions, you can select from the Transaction type to be applied list as shown below. 66

67 10. In the case of our scenario, we will leave it set to the default None. 67

68 11. We will need to create a Receive Port and Location using the File Adapter for each Orchestration 12. We then Bind our Orchestrations to our new Ports and our ready for testing. Summary o We have learned about the capabilities and limitations of the Community ODBC Adapter. o We have learned about the Port Types and Multi-part Message Types issues and how to resolve them. o We have walked through three different Design Time scenarios on using the Adapter. o We have learned how to configure our Ports for the Adapter 68

69 Summary We learned about IIS Configuration and Application Pool Identities. We discovered the features of BizTalk Server 2010 AppFabric Connect for Services. We learned how to configure the Windows SharePoint Services adapter. We also learned how about the Binding Node Properties for the WCF LOB Adapter for mysap Business Suite. We learned about the features of the BizTalk Community Adapters provided by /n Software. We were provided with a tutorial and several scenarios on the use of the ODBC Adapter from Two-Connect. 69