Product Catalog & Technical Manual

Transcription

1 Manual

2 Page: 1 Table of Contents Page History of ASSA, Incorporated...2 General Information...3 Keys and Keying...5 Architectural...11 Mortise Cylinders...12 High Security Mogul Cylinders...20 Rim Cylinders...25 Mortise & Rim Interchangeable Core Cylinders...29 Key-in-Knob/Lever Cylinders...33 Deadbolts...42 Auxiliary Locks...50 Padlocks...67 Profile Cylinders...74 Pin Kits, Tools & Accessories...82 Care & Maintenance for ASSA Cylinders & Keys...87 Technical Information...89 Parts Index...104

3 Page: 2 History of ASSA, Incorporated ASSA was established in 1881 by the blacksmith August Stenman after buying a small hinge manufacturer in the town of Eskilstuna, Sweden. One day his wife embroidered a pillow slip with his name forwards and backwards August Stenman, Stenman August, and so ASSA became the name of the new company. By 1939, ASSA had produced its first cylinder lock and delivered its first 5-pin cylinder master key system seven years later. In 1959, ASSA introduced its first registered key systems with key control. In 1981, ASSA celebrated its 100th anniversary as a company with the release of the ASSA Twin 6000 system, a new cylinder concept utilizing the dual locking mechanisms of today's ASSA cylinders. ASSA, Inc. was originally opened in Naperville, IL as a marketing arm of ASSA AB in Sweden. Incorporated in 1984, ASSA, Inc. was a full line manufacturer of mortise locks, padlocks, auxiliary locks, and high security key systems. Under the direction of Wayne Wilkerson, who became president and CEO in 1989, ASSA, Inc. was transformed into the largest high security cylinder manufacturer in the United States. Starting in 1992, ASSA, Inc. shifted its sales direction from independent dealer sales to institutional, industrial, and government sales. With the introduction of its new master keying capabilities they became the logical choice for institutions around the country. In 1996 alone, sales rose from under $500, to over 8 million. Some of the customers who made this possible are The World Bank, The United States Supreme Court, Boeing, AT&T, Baltimore Ravens Stadium, The University of New Hampshire, Prince George's County School District, Alexandria City Public Schools, Tucson Unified Schools, and numerous Schools and federal government facilities. With the introduction of the system in 1996, ASSA ushered in a new generation of lock technology offering patent protected, unique geographically exclusive keyways for ASSA authorized security centers and end users. The innovative key design and cylinder helped to eliminate unauthorized duplicate keys and to maintain a key control system that is unmatched in the industry. mechanism, the Twin Exclusive built on the original design and allowed one key to work both cylinders. That same year, ASSA, Inc. opened its doors to a new 5,000 square foot facility in New Haven, CT increasing its production capabilities with state of the art machinery and assembly equipment. The high security key control system introduced by ASSA in 2003 is the Twin Pro, the most sophisticated key system being offered on the world market today. Worldwide keyways can be obtained through written agreement with ASSA for guaranteed exclusivity. The Twin Pro is not stocked by our traditional distribution outlets eliminating the possibility of the system being compromised. ASSA trains facilities to service these locks in-house or they can be serviced by an ASSA certified service center. The Twin Maximum product line introduced in 2005 is set up to interface with the ASSA Concept 4 CLIQ system. Combining high security mechanical cylinders and keys with state of the art electronics, the ASSA C4 CLIQ provides the user with a level of accountability and system control unmatched in the industry. A full audit trail with date and time stamp ensures the security of all or selected openings within the system while the keys can be used to operate standard mechanical cylinders as well. The innovative ASSA C4 CLIQ is yet another example of why ASSA continues to be the world s leader in high security and patented key control solutions. In 2000, ASSA introduced the Twin Exclusive, a patent-protected upgrade to the highly successful Twin 6000 series. Utilizing the same dual locking

4 Page: 3 General Information The ALPHA Twin 6000 System, The ALPHA Twin Exclusive System and The Twin Exclusive Cylinder Program ASSA introduced the ALPHA System of key control programs to meet the security requirements of locksmiths, distributors and end users. The Twin Exclusive System is an extension of the Twin 6000 patent. The Twin Exclusive was introduced as an upgrade to the ASSA Twin 6000 program, introducing new patented keyblanks based on the patent and new key profiles offering a low cost advantage for extending patent protection for the end user. The system consists of virtually the same programs as ALPHA and Cylect. Briefly, the system consists of four programs: TEL/Gamma TER/Beta TED/Delta TEE/Alpha Locally exclusive keyways for locksmiths Regionally exclusive keyways for locksmiths Nationally exclusive keyways for distributors Regionally exclusive keyways for end-users, sold through normal channels of distribution. The Cylect Cylinder Program The was introduced as an upgrade to the ASSA Twin 6000 program, introducing new patented keyblanks and key profiles. The system consists of virtually the same programs as ALPHA: C2L C2R C2D C2E Keyway Information Locally exclusive keyways for locksmiths Regionally exclusive keyways for locksmiths Nationally exclusive keyways for distributors Regionally exclusive keyways for end-users, sold through normal channels of distribution. Each key control program in the ALPHA and systems utilizes a standard cylinder plug profile (broaching). Various sidebar codes are used to create different keyways. Keyblanks produced after August 1988 are stamped with complete keyway code, e.g., Please include keyway code and profile when ordering keys, keyblanks and cylinders, except SNS cylinders. (See Cylinder form, below). The Twin Pro Cylinder Program The Twin Pro program was introduced in 2003 as ASSA s highest level of controlled security in its delivery process. Twin Pro product is drop shipped only from the factory and is available to End Users and ASSA Certified Service Centers. Twin Maximum Cylinder Program The Twin Maximum program released in late 2005 has features that none of our other systems offer. The most advanced secure UL 437 Listed cylinder ever produced. A non UL version is offered for less secure doors. This system is designed to interface with the new C4 CLIQ access control cylinder with full audit trail features for the cylinders and keys. C4 CLIQ Cylinder Program Concept 4 is the most advanced access control system designed for a stand alone cylinder and key in the industry today. Offers time zoning, audit trial for cylinder and key. Interface with HID Prox systems in multiple formats. Offered in Twin Maximum only. Cylinder Form ASSA Twin locks and cylinders are available in three different forms: COMP (Complete) Keyed-different items include two cut keys per cylinder. Keyed-alike items normally include two cut keys per cylinder. SUB (Sub-assembled) Uncombinated cylinder includes sidebar mechanism, but no tumbler pins, springs or keyblanks. Pin chamber closure strip, plug and screws provided. SNS (Sub, No sidebar) Uncombinated cylinder without sidebar and sidebar springs. Includes sidepins, sidepin springs, standard tailpiece items and pin chamber closure. When ordering ASSA Twin locks and cylinders, be sure to indicate CYLINDER FORM.

5 Page: 4 General Information Red Core ASSA provides temporary construction cores (red cores) for its interchangeable core cylinders upon request. Red cores are invoiced separately and upon return to ASSA, credit will be issued for the full invoiced amount less a 50% handling fee. Request for credit must be made in writing to ASSA Customer Service referencing the original invoice upon which the red cores appear. KEYS ARE NOT INCLUDED IN THE PRICE OF THE RED CORE AND ARE NOT ELIGIBLE FOR RETURN. All cut keys are invoiced separately (list each). To order interchangeable core cylinders with temporary cores, specify cylinder model number, Cam, finish, by RED CORE, example, 6552ICR-1 x 626 x RED CORE. Cylinder will be charged at COMP price. To order red core separately, specify 70600ICR. Specify change keys as TWIN-KD-RED and control keys as TWIN-CT-RED. Master Keying ASSA Twin locks and cylinders may be master keyed to meet virtually any requirement. Contact the Key Records Department to discuss special needs. Master keying and bitting charges are shown on page 8 in the ASSA Price List. FINISHES Standard finishes are shown below. Antique brass (609) is available for deadbolts only. ASSA Equivalent BHMA Symbol U.S. Symbol Euro Finish Description 625 US Bright Chrome 626 US 26D 13 Satin Chrome 605 US 3 20 Bright Brass 606 US 4 23 Satin Brass 609 US 5 47 Antique Brass 624 US 10B 46 Dark Oxidized 612 US Satin Bronze Special Function Cylinders ASSA offers two special function cylinders most commonly used in the Detention market. One is a directional cylinder, which is operated bi-directionally by one key and in one direction only (clockwise or counterclockwise) by a subordinate key. This special function is accomplished by a modification to the cylinder plug. The necessity for this product is clear; to provide functionality in the system design. However, due to the physical modification of the plug when used in a master key system, the potential size of the master key system will be reduced. The second special function is a limited rotation cylinder. This cylinder requires two modifications and will be used in conjunction with a directional function. One key will operate bi-directionally 360º and only one direction (clockwise or counter-clockwise) by a subordinate key stopping at a determined position prior to 180º. These modifications will greatly reduce the potential of a master key system. It is essential to indicate all special function cylinders in the initial master key system design. Otherwise they may not be possible as part of the master key system. Special function cylinders are offered in limited models and are indicated by a symbol: Prefixing the model number specifies available in special function. How to order Example Model No. Finish Profile - Side Bar Specify E8551CW (For Directional Cylinders) Specify E8551WL (For Limited Rotation Cylinders)

6 Page: 5 Keys and Keying All ASSA keys are manufactured from the highest quality nickel silver material. The key s rounded back facilitates smooth operation and minimizes wear. The large key bow simplifies identification and use by manually impaired people. Keys can be provided with various options of tactile identification upon request. Available in several profiles or broaches, ASSA high security keys all feature a unique side milling on the lower portion of the key blade and are precut at the ASSA factory. Each side milling represents a key section that is factory controlled on a geographic basis providing an unmatched level of patented key control. Benefits Two sets of key cuts designed to operate independent locking mechanisms Innovative key design protected by U.S. and international patents Patented key control offers the ultimate in high security Top cuts can be generated on standard, quality code cutting equipment ASSA s generous keying capabilities allow over 160,000 change keys under a single master key Warranty ASSA guarantees that if a key should break under normal usage, ASSA will replace it at no charge plus any reasonable service charge ASSA guarantees that no other top level master key for any other ASSA factory generated master key system will operate as a top level key in an end-user s system for a specified geographic territory ASSA guarantees its patented systems against unauthorized key duplication Certification Twin Exclusive,, Twin Pro and Twin Maximum keys listed under U.S. Patent numbers 5,067,335 and 5,640,865 Technical Information High quality nickel silver material Key combination is read from tip to bow No. 1 cut is deepest, No. 9 is shallowest Maximum adjacent cut is 5 (example: 1-6 is acceptable, 1-7, 8 or 9 is not) Cut depth is measured as root depth from back of key to bottom of cut Special stamping and custom coining available

7 Page: 6 Keys and Keying Twin Maximum Twin Pro Twin Exclusive Twin 6000 Item No. Description ASSA Cut Keys TMAX-KD TMAX-MK TPRO-KD TPRO-MK Twin-KD Twin-MK V-10-KD V-10-MK Twin Maximum Cut Keys KD/KA Twin Maximum Cut Keys, In a Master Key System Twin Pro Cut Keys KD/KA Twin Pro Cut Keys, In a Master Key System Twin Exclusive/6000 Classic (Specify Profile) Cut Keys KD/KA Twin Exclusive/6000 Classic (Specify Profile) Cut Keys, In a Master Key System Cut Keys KD/KA Cut Keys, In a Master Key System ASSA Key Blanks Twin Maximum Key Blanks Qty. 100/box Twin Pro Keyblanks/Sidebar code (specify sidebar code) Qty. 100/box Twin 6000 Key Blanks (specify sidebar code and profile) Qty. 100/box E Twin Exclusive Key blanks/sidebar code (specify sidebar code) Qty 100/box Keyblanks/Sidebar code (specify sidebar code) Qty 100/box White Code Tags ASSA Coined Key Blanks minimum key blank quantity each order (Specify profile and side code)

8 Page: 7 Keys and Keying UK UM PK PL UL Open: Master-Key systems Restricted: All Open: Master-Key Systems Series Open: Keyed Alike/Keyed Different Item No. Description 600 Series Cut Keys & Key Blanks 600-KD Cut Keys KD / KA 600-MK Cut Keys, In a Master Key System Key blanks/ Specify profile (UK, UL, UM, PK, PL) 500 Series Key Blanks Key blanks/ specify profile 700 Series Key Blanks Key blanks/ specify profile Cut Key Set CKS-1 ECKS TPCKS TMCKS V-10 Cut Key Set Twin Exclusive Cut Key Set Twin Pro Cut Key Set Twin Maximum Cut Key Set

9 Page: 8 ASSA Concept 4 CLIQ ASSA C4 CLIQ intelligent locking systems gives control over all keys, which can easily be upgraded and can be tailor-made to suit any needs. Since every key has its own identity, it becomes the personal property of the key holder. C4 CLIQ makes intelligent, flexible and high security lock systems possible. The key s mechanical design creates the basic foundation made up of different security zones in the same way as in mechanical lock systems. The electronic programming of the keys gives authorization to individuals or to group of individuals. C4 CLIQ technology s basic idea is the creation of an intelligent security system. That means a lock system that retains a high level of security despite upgrading, alterations or expansion. Even after many years of use by a continual flow of new tenants, new employees or changes occurring in the workplace, the level of security will remain the same. ASSA C4 CLIQ offers HID Prox Chips To match your existing HID Prox Access Control System. This allows that person to access the existing system with one credential. Benefits Based on Twin Maximum Technology High and Medium Security Levels Extreme Master Keying Capacity Concealed Keying Wide Range of Retrofit Cylinder Shapes Possible to Add C4 CLIQ Functionality HID Prox Chip Warranty Battery Life 2 Years or 20K Openings Lifetime on Key Breakage Certification Patented Key Control UL Listed Operating Temperatures: -40 F to 130 F Technical Information Power Supply is Provided by the Key Data Transfer 64 Bit and Higher Water Resistant Sealed Electronics No Wires 3 Levels of Cylinders and Keying: Twin Maximum UL 437 Cylinder & Key Twin Maximum Medium Non Cylinder and Twin Maximum Key UL 437 Twin C4 CLIQ Electromechanical Cylinder and Key

10 Page: 9 C4 CLIQ Keys and Software C4 CLIQ Cut Key C4 CLIQ C-Key C4 CLIQ Master C-Key C4 CLIQ Contact Key HID Prox Key Item No. Description ASSA C4 CLIQ Keys CLIQ-KD CLIQ-KDP CLIQ-CK CLIQ-MCK CLIQ-CON CLIQ-PRX CLIQ Cut Key CLIQ-Cut Key with Proximity tag CLIQ C-Key CLIQ Master C-Key CLIQ Contact Key HID Prox Key C4 CLIQ Program Device C4 CLIQ Demo Kit Item No. Description C4 CLIQ Programming Unit & Software CLIQ-END CLIQ-END-NT CLIQ-DEA CLIQ-DEA-NT CLIQ-PD PFMR-S PFMR-N CLIQ-SDK Program Device with Single Site Performer Software Manages C4 CLIQ System Program Device with Network Performer Software Manages C4 CLIQ System Program Device with Single Site Performer Software Manages Multiple C4 CLIQ Systems Program Device with Network Performer Software Manages Multiple C4 CLIQ Systems C4 CLIQ Programming Device Performer Software Single Site Performer Software Network Sales Demo Kit

11 Page: 10 Keys and Keying Master Key Order Procedure Master Key system orders for ASSA products are processed using desktop computer systems. Part of our processing software allows us to import the customer order data when it is submitted to us in the compatible format described below on a diskette or via . Excel File Format The layout of an Excel file which we can import is shown below. The first line in the file should number the fields I through 9, the file should not contain headers or formulas. Field Content Character limit 1 Item # 4 2 Cyl. Quan. 4 3 Cyl/Cam PN 12 4 Finish 5 5 Cam 3 (Do not use, include cam with cylinder part #) 6 Keyset 12 7 Key Quan. 4 8 Door # 12 9 Comments Spl. Key stamp 12 (For stamping other than DHI or SKCS standard) The import of an Excel format file offers a special feature regarding systems which incorporate a ENG key. If a particular item is to be operated by the ENG key in addition to the other key indicated by the keyset you can indicate this to our software by adding a suffix of -E to the keyset. In such a case AAI would become AAI-E if it should be operated by the ENG key. This specification option is not available if the imported file is supplied in ASCII format. In order to ensure that correct master keying information is received and accurate records are maintained, ASSA has designed a Sample Order Template. The following is an example of a completed sample order log that must accompany each master key order submitted to ASSA. When filling out the key quantity column, unless otherwise requested, two keys will be supplied per cylinder with all master keyed orders. The form is available by contacting your ASSA representative, ASSA Customer Service, or by logging onto the ASSA website If a computer or the Excel program is not available to you, contact your ASSA representative for assistance in getting the form completed. The completed form is then ed to ASSA key records address adautaj@assalock.com. Master key purchase orders can be faxed to or mailed to ASSA Inc., 110 Sargent Dr. New Haven, CT The ASSA Key Records Department carefully designs and records master key systems in compliance with customer requirements and ASSA security policy. System documents are thoroughly detailed, produced, and professionally presented, and should be considered valuable and confidential. Key Records information and service is available as follows: Factory Keyed Cylinders Cylinders pinned by the factory are supplied Keyed Different or if so specified as one of the following options: Master Keyed (Bittings provided at No Charge when requested with the order) Keyed Alike/Keyed Different Single Keyed Different (Part of MK System) Factory does not recommend cross-keying and will not warranty any cross-keyed cylinders.

12 Page: 11 Architectural Specification High Security Key System General requirements: 1. Provide a high security key system capable of integrating various type of lock cylinders; mogul, builder hardware, and auxiliary locks, into a patented, geographically restricted, factory master keyed system to allow control over the entire facility. a. Include detention mogul cylinders, builders hardware cylinders, auxiliary locks, and padlocks keyed into one compatible system for locks specified in this section and those specified in related sections. b. Proprietary Keyway: Provide written guarantee from the manufacturer that the Keyway used on this project is for the exclusive use of the Owner on a regional basis.. 2. Master Keying a. Provide level 3 grandmaster key system. As defined in (DHI) "Keying Systems and Nomenclature". b. Provide factory established key system and keying of cylinders. 3. Keys 1). Arrange for manufacturer to maintain permanent key identification and registration records. a. Replacement Keys: available only from the manufacturer upon written authorization from the Owner. b. Stamping of Keys: Stamp keys with an identification code in accordance with "Keying Procedures, Systems, and Nomenclature" published by DHI. c. Quantity: 4. Cylinders 1) Change keys: a. Allow for four (4) change keys per lock cylinder. b. Furnish a minimum of six (6) keys per key set, remaining keys as instructed by the Owner. 2) Master level keys: a. Furnish a minimum of ten (10) of each masterkey and six (6) of each master level key above the grandmaster. d. Material: Nickel silver alloy. e. Minimum size: 1" x 3" long 1/8 "thick, a. Marking of Cylinders: Using a black indelible ink pen, mark body of cylinders with an identification code in accordance with "Keying Procedures, Systems, and Nomenclature" published by DHI. b. Standard compliance 1) Listed under UL ) ANSI/BHMA A standard for High Security Cylinders. 3) ASTM standards for Correctional Cylinders 5. Temporary Construction Security a. Provide temporary construction cylinders and keys for exterior doors, automatically locking doors where security is required, and doors to rooms used for storage. 1) Temporary cylinders and keys remain the property of the contractor. b. Provide temporary blank strike plates for lock bolt receivers to prevent automatic locking of doors where temporary construction cylinders are not used and security at the door during construction is not required.

13 Page: 12 Mortise Cylinders ASSA mortise cylinders are designed to replace several original manufacturers cylinders in their locksets offering the highest level of security available on the market today. Made to standard U.S. dimensions, these rugged cylinders are available in a variety of finishes and lengths and stand up to even the heaviest abuse. All ASSA mortise cylinders are listed under U.L. 437, a set of tests for determining the cylinder's physical resistance against various forms of attack. ASSA mortise cylinders will improve the security of standard mortise locksets by Arrow, Corbin/Russwin, Sargent, Schlage, Yale and many other manufacturers. Benefits: Drill resistant cylinder housing and plug Case-hardened steel inserts and stainless steel pins Two independent locking mechanisms to ensure optimum pick resistance Inactive false grooves on side pins designed to catch picking tools Extremely close tolerances Can be easily rekeyed in the field With the purchase of one inexpensive kit, 1-1/8" mortise cylinder is easily converted to rim cylinder Warranty: ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life Certification: All ASSA Twin Series Mortise cylinders are U.L. 437 listed as well as ASTM F listed for standard test methods for detention Locks. Technical Information: Available in cylinder lengths 1-1/8" through 2" in 1/8" increments Available with limited rotation and/or unidirectional features 13 cam options available Cylinder housing and plug are made of high quality brass Stainless steel top pins Bottom pins and master pins are nickel silver Finishes: BHMA Symbol U.S. Symbol Euro Finishes Description 625 US Bright Chrome 626 US 26D 13 Satin Chrome 605 US 3 20 Bright Brass 606 US 4 23 Satin Brass 612 US Satin Bronze 624 US 10B 46 Dark Oxidized Bronze

14 Page: 13 Mortise Cylinders Exploded View Standard-pin Tumbler System Drill-resistant Cylinder Housing Drill-resistant Cylinder Plug System Code Coded Side Bar Locking System Large Key-bow Side Bar Code Spool Driver Pins Shear Line Countermilling Side Bar Side Bar No key inserted: Standard pins block the shear line Side bar rests in groove of cylinder housing, blocking movement of plug Correct key inserted: System code of key lifts standard pins to shear line Side bar code of key lifts side pins into a position where the side bar can be received. Side bar then recesses into plug as key is turned

15 Page: 14 Mortise Cylinders Exploded View Cylinder Springs Master Pins Top Pins Bottom Pins Cover Strip Cam Cylinder Housing Cylinder Plug Sidebar Springs Sidebar Side Pins Side Pin Spring Mortise Cylinders Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Description HD Head Diameter HT Head Thickness BL Body Length w/cam BD Body Diameter1 1-1/8" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.125" (28.575mm) 1.157" (29.387mm) 1-1/4" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.25" (31.75mm) 1.157" (29.387mm) 1-3/8" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.375" (34.925mm) 1.157" (29.387mm) 1-1/2" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.5" (38.1mm) 1.157" (29.387mm) 1-5/8" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.625" (41.275mm) 1.157" (29.387mm) 1-3/4" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.75" (44.45mm) 1.157" (29.387mm) 1-7/8" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 1.875" (47.625mm) 1.157" (29.387mm) 2" Mortise Cylinders 1.366" (34.7mm) 0.138" (3.5mm) 2.0" (50.8mm) 1.157" (29.387mm) Corbin Jumbo Mortise Cylinder 1.648" (41.9mm) 0.138" (3.5mm) 1.125" (28.575mm) 1.492" (37.896mm) ASSA Segal Cylinder 1.439" (36.6mm) 0.148" (3.759mm) 1.377" (34.975mm) 1.367" (34.721mm) ASSA Otis Elevator Cylinder 0.595" (15.113mm) 0.110" (2.794mm) 1.377" (34.975mm) 1.157" (29.387mm)

16 Page: 15 Available Cams for Mortise Locks #1 Adams Rite #2 Sargent #3 Corbin Clover Leaf #4 Corbin Beaver Tail #5 Yale Standard #6 Schlage L #7 Segal Type #8 Corbin Jumbo #9 Best 30H #10 AirTeq/Norment #11 Mogul #12 Corbin Jumbo Clover Leaf #13 Sargent Short #14 Sargent Mogul Cam #15 Yale Rep. Cam # Description RA Head Radius RB Overall Radius #1 Adams Rite Cam 0.118" (3mm) 0.555" (14.1mm) #2 Sargent Cam N/A 0.709" (18.0mm) #3 Corbin Clover Leaf Cam 0.114" (2.9mm) 0.602" (15.3mm) #4 Corbin Beaver Tail Cam N/A 0.732" (18.6mm) #5 Yale Standard Cam N/A 0.709" (18.0mm) #6 Schlage L Cam 0.124" (3.15mm) 0.516" (13.1mm) #7 Segal Type Cam N/A 0.779" (19.8mm) #8 Corbin Jumbo Cam N/A 0.914" (23.2mm) #9 Best 30H Cam 0.114" (2.9mm) 0.602" (15.3mm) #10 AirTeq/Norment Cam N/A 0.787" (18.7mm) #11 Mogul Cam N/A 1.165" (29.6mm) #12 Corbin Jumbo Clover Leaf 0.114" (2.9mm) 0.828" (21.0mm) #13 Sargent Short Cam N/A 0.515" (13.0mm) #14 Sargent Mogul Cam N/A 1.043" (26.49mm) #15 Yale Replacement Cam 0.308" (7.82mm) 0.742" (18.8mm)

17 Page: 16 Mortise Cylinders Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Model#/Cam Notes Size Description HD HT BL BD V6551- (Specify Cam) 1-1/8" Mortise Cylinder 1.366" 0.138" 1.125" 1.157" V6552- (Specify Cam) 1-1/4" Mortise Cylinder 1.366" 0.138" 1.25" 1.157" V6553- (Specify Cam) 1-3/8" Mortise Cylinder 1.366" 0.138" 1.375" 1.157" V6554- (Specify Cam) 1-1/2" Mortise Cylinder 1.366" 0.138" 1.50" 1.157" V6555- (Specify Cam) 1-5/8" Mortise Cylinder 1.366" 0.138" 1.625" 1.157" V6556- (Specify Cam) 1-3/4" Mortise Cylinder 1.366" 0.138" 1.75" 1.157" V6557- (Specify Cam) 1-7/8" Mortise Cylinder 1.366" 0.138" 1.875" 1.157" V6558- (Specify Cam) 2" Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Twin Exclusive E6551- (Specify Cam) 1-1/8" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.125" 1.157" E6552- (Specify Cam) 1-1/4" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.25" 1.157" E6553- (Specify Cam) 1-3/8" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.375" 1.157" E6554- (Specify Cam) 1-1/2" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.50" 1.157" E6555- (Specify Cam) 1-5/8" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.625" 1.157" E6556- (Specify Cam) 1-3/4" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.75" 1.157" E6557- (Specify Cam) 1-7/8" Twin Exclusive Mortise Cylinder 1.366" 0.138" 1.875" 1.157" E6558- (Specify Cam) 2" Twin Exclusive Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Twin 6000 Classic (Specify Cam) 1-1/8" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.125" 1.157" (Specify Cam) 1-1/4" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.25" 1.157" (Specify Cam) 1-3/8" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.325" 1.157" (Specify Cam) 1-1/2" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.50" 1.157" (Specify Cam) 1-5/8" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.625" 1.157" (Specify Cam) 1-3/4" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.75" 1.157" (Specify Cam) 1-7/8" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 1.875" 1.157" (Specify Cam) 2" Twin 6000 Classic Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Twin Pro (Specify Cam) 1-1/8" Twin Pro Mortise Cylinder 1.366" 0.138" 1.125" 1.157" (Specify Cam) 1-1/4" Twin Pro Mortise Cylinder 1.366" 0.138" 1.25" 1.157" (Specify Cam) 1-3/8" Twin Pro Mortise Cylinder 1.366" 0.138" 1.325" 1.157" (Specify Cam) 1-1/2" Twin Pro Mortise Cylinder 1.366" 0.138" 1.50" 1.157" (Specify Cam) 1-5/8" Twin Pro Mortise Cylinder 1.366" 0.138" 1.625" 1.157" (Specify Cam) 1-3/4" Twin Pro Mortise Cylinder 1.366" 0.138" 1.75" 1.157" (Specify Cam) 1-7/8" Twin Pro Mortise Cylinder 1.366" 0.138" 1.875" 1.157" (Specify Cam) 2" Twin Pro Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Available in special function cylinders, see page 4.

18 Page: 17 Mortise Cylinders Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Model#/Cam Notes Size Description HD HT BL BD Twin Maximum (Specify Cam) 1-1/8" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.125" 1.157" (Specify Cam) 1-1/4" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.25" 1.157" (Specify Cam) 1-3/8" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.375" 1.157" (Specify Cam) 1-1/2" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.50" 1.157" (Specify Cam) 1-5/8" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.625" 1.157" (Specify Cam) 1-3/4" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.75" 1.157" (Specify Cam) 1-7/8" Twin Maximum Mortise Cylinder 1.366" 0.138" 1.875" 1.157" (Specify Cam) 2" Twin Maximum Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Twin Maximum Medium Security (Specify Cam) 1-1/8" Twin Maximum Medium Security Mortise Cylinder 1.366" 0.138" 1.125" 1.157" (Specify Cam) 1-1/4" Twin Maximum Medium Security Mortise Cylinder 1.366" 0.138" 1.25" 1.157" Twin Low L651- (Specify Cam) 1-1/8" Twin Low Mortise Cylinder 1.366" 0.138" 1.125" 1.157" L652- (Specify Cam) 1-1/4" Twin Low Mortise Cylinder 1.366" 0.138" 1.25" 1.157" L653- (Specify Cam) 1-3/8" Twin Low Mortise Cylinder 1.366" 0.138" 1.375" 1.157" L654- (Specify Cam) 1-1/2" Twin Low Mortise Cylinder 1.366" 0.138" 1.50" 1.157" L655- (Specify Cam) 1-5/8" Twin Low Mortise Cylinder 1.366" 0.138" 1.625" 1.157" L656- (Specify Cam) 1-3/4" Twin Low Mortise Cylinder 1.366" 0.138" 1.75" 1.157" L657- (Specify Cam) 1-7/8" Twin Low Mortise Cylinder 1.366" 0.138" 1.875" 1.157" L658- (Specify Cam) 2" Twin Low Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Twin 600 Series Classic 651- (Specify Cam) 1-1/8" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.125" 1.157" 652- (Specify Cam) 1-1/4" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.25" 1.157" 653- (Specify Cam) 1-3/8" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.375" 1.157" 654- (Specify Cam) 1-1/2" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.50" 1.157" 655- (Specify Cam) 1-5/8" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.625" 1.157" 656- (Specify Cam) 1-3/4" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.75" 1.157" 657- (Specify Cam) 1-7/8" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 1.875" 1.157" 658- (Specify Cam) 2" Twin 600 Series Classic Mortise Cylinder 1.366" 0.138" 2.0" 1.157" Available in special function cylinders, see page 4. Twin Maximum available with C4 CLIQ Technology. Example: x CLIQ x 626 x Sidebar x Comp

19 Page: 18 Mortise Cylinders Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Corbin Jumbo, ASSA Segal, ASSA Otis Elevator Mortise Cylinders Model#/Cam Notes Description HD HT BL BD V Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" V Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" V6573 Segal Inside Mortise Cylinder with Cam 1.439" 0.148" 1.377" 1.367" V6551E Otis Elevator Cylinder 0.595" 0.110" 1.377" 1.157" Twin Exclusive E Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" E Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" E6573 Segal Inside Cylinder with Cam 1.439" 0.148" 1.377" 1.367" E6551E Otis Elevator Cylinder 0.595" 0.110" 1.377" 1.157" Twin 6000 Classic Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" 6573 Segal Inside cyl. with Cam 1.439" 0.148" 1.377" 1.367" 6551E Otis Elevator Cylinder 0.595" 0.110" 1.377" 1.157" Twin Pro Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" 6173 Segal Inside cyl. with Cam 1.439" 0.148" 1.377" 1.367" 6151E Otis Elevator Cylinder 0.595" 0.110" 1.377" 1.157" Twin Maximum Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" 8873 Segal Inside cyl. with Cam 1.439" 0.148" 1.377" 1.367" 8851E Otis Elevator Cylinder 0.595" 0.110" 1.377" 1.157" Twin Low L751-8 Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" L Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" Twin Low 600 Series Classic Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam 1.648" 0.138" 1.125" 1.492" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam 1.648" 0.138" 1.125" 1.492" Available in special function cylinders, see page 4. Twin Maximum available with C4 CLIQ Technology. Example: x CLIQ x 626 x Sidebar x Comp

20 Page: 19 Mortise Component Parts Cylinder Shell Cylinder Plug Model# Notes Description Model# Notes Description * 1-1/8" Cylinder Shell * 1-1/4" Cylinder Shell * 1-3/8" Cylinder Shell * 1-1/2" Cylinder Shell * 1-5/8" Cylinder Shell * 1-3/4" Cylinder Shell * 1-7/8" Cylinder Shell * 2" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * 1-1/4" Cylinder Plug * 1-3/8" Cylinder Plug * 1-1/2" Cylinder Plug * 1-5/8" Cylinder Plug * 1-3/4" Cylinder Plug * 1-7/8" Cylinder Plug * 2" Cylinder Plug Twin Exclusive/Twin 6000 Classic * 1-1/8" Cylinder Shell * 1-1/4" Cylinder Shell * 1-3/8" Cylinder Shell * 1-1/2" Cylinder Shell * 1-5/8" Cylinder Shell * 1-3/4" Cylinder Shell * 1-7/8" Cylinder Shell * 2" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * 1-1/4" Cylinder Plug * 1-3/8" Cylinder Plug * 1-1/2" Cylinder Plug * 1-5/8" Cylinder Plug * 1-3/4" Cylinder Plug * 1-7/8" Cylinder Plug * 2" Cylinder Plug Corbin Jumbo Cyl. Thread Adapter * Indicates Finished Components. Specify Profile 0P4 for Twin Pro or 0M7 for Twin Maximum. Twin Pro/Twin Maximum * 1-1/8" Cylinder Shell * 1-1/4" Cylinder Shell * 1-3/8" Cylinder Shell * 1-1/2" Cylinder Shell * 1-5/8" Cylinder Shell * 1-3/4" Cylinder Shell * 1-7/8" Cylinder Shell * 2" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * 1-1/4" Cylinder Plug * 1-3/8" Cylinder Plug * 1-1/2" Cylinder Plug * 1-5/8" Cylinder Plug * 1-3/4" Cylinder Plug * 1-7/8" Cylinder Plug * 2" Cylinder Plug

21 Page: 20 High Security Mogul Cylinders ASSA Mogul cylinders are designed to provide the maximum level of security and durability. Available for ADTEC, Folger Adam, AirTeq/Norment, R.R. Brink, Sargent, and Southern Steel detention locksets, the ASSA Mogul is the smart choice for today s corrections industry. A hardened cover plate and hardened steel inserts in the cylinder shell provide protection against even the most savage and determined forms of physical attack. As with all ASSA high security cylinders, our patented key control ensures the ultimate protection against unauthorized key duplication. Benefits: Hardened plug cover plate to prevent drill attack Case-hardened steel inserts and stainless steel pins Two independent locking mechanisms to ensure security and optimum pick resistance Inactive false grooves on side pins designed to enhance pick resistance Counter mill in each chamber position to further enhance pick resistance Extremely close tolerances Can be easily rekeyed in the field Warranty: ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life Certification: All ASSA Twin Series Mogul cylinders are U.L. 437 listed as well as ASTM F Certified for standard test methods for Detention Locks Technical Information: Available in 1-1/8" and 1-1/2" lengths Available with limited rotation and/or unidirectional features Cylinder housing and plug are made of high quality brass Stainless steel top pins Bottom pins and master pins are nickel silver Finishes: BHMA Symbol U.S. Symbol Euro Finish Description 626 US 26D 13 Satin Chrome 606 US 4 23 Satin Brass

22 Page: 21 High Security Mogul Cylinders Exploded View 1-1/8" Mogul Cylinder Pin Chamber Closing Rod Pin Chamber Closing Screws Cam Screws Cam Top Pins Bottom Pins Cylinder Plug Twin Exclusive/6000 Classic Cylinder Housing Side Bar Side Pins Twin Exclusive Hardened Cover Plate Patented, Geographically Exclusive Key E Twin Exclusive 1-1/2" Mogul Cylinder Pin Chamber Closing Rod Pin Chamber Closing Screws Cam Screws Cam Adapter Top Pins Bottom Pins Cylinder Plug Twin Exclusive/6000 Classic Cylinder Housing Side Bar Side Pins Twin Exclusive Hardened Cover Plate Patented, Geographically Exclusive Key E Twin Exclusive

23 Page: 22 High Security Mogul Cylinders 1-1/8" Mogul Cylinder AirTeq/Norment R.R. Brink 1-1/2" Mogul Cylinder Southern Steel Folger Adam AirTeq/Norment Adtech Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Model#/Cam Notes Size Description HD HT BL BD Mogul Cylinders V /8" AirTeq/Norment Cylinder with Mogul Cam 2.245" 0.340" 1.260" 2.0" V /8" AirTeq/Norment Cylinder with Sargent Mogul Cam 2.245" 0.340" 1.260" 2.0" V8551BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam 2.245" 0.340" 1.260" 2.0" V8551SS 1-1/2" Southern Steel Cylinder without Cam 2.245" 0.120" 1.590" 2.0" V8551FA 1-1/2" Folger Adam Cylinder without Cam 2.245" 0.120" 1.590" 2.0" V8551NA 1-1/2" AirTeq/Norment Cylinder without Cam 2.245" 0.120" 1.590" 2.0" V8551AD 1-1/2" Adtech Cylinder without Cam 2.245" 0.120" 1.590" 2.0" Twin Exclusive Mogul Cylinders E /8" AirTeq/Norment Cylinder with Mogul Cam 2.245" 0.340" 1.260" 2.0" E /8" AirTeq/Norment Cylinder with Sargent Mogul Cam 2.245" 0.340" 1.260" 2.0" E8551BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam 2.245" 0.340" 1.260" 2.0" E8551SS 1-1/2" Southern Steel Cylinder without Cam 2.245" 0.120" 1.590" 2.0" E8551FA 1-1/2" Folger Adam Cylinder without Cam 2.245" 0.120" 1.590" 2.0" E8551NA 1-1/2" AirTeq/Norment Cylinder without Cam 2.245" 0.120" 1.590" 2.0" E8551AD 1-1/2" Adtech Cylinder without Cam 2.245" 0.120" 1.590" 2.0" Twin 6000 Classic Mogul Cylinders /8" AirTeq/Norment Cylinder with Mogul Cam 2.245" 0.340" 1.260" 2.0" /8" AirTeq/Norment Cylinder with Sargent Mogul Cam 2.245" 0.340" 1.260" 2.0" 8551BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam 2.245" 0.340" 1.260" 2.0" 8551SS 1-1/2" Southern Steel Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551FA 1-1/2" Folger Adam Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551NA 1-1/2" AirTeq/Norment Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551AD 1-1/2" Adtech Cylinder without Cam 2.245" 0.120" 1.590" 2.0" No Cams offered for 1-1/2" Mogul cylinders Available in special function cylinders, see page 4.

24 Page: 23 High Security Interchangeable Core Mogul Cylinders 1-1/2" IC Mogul Cylinder Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Model#/Cam Notes Size Description HD HT BL BD Interchangeable Core Mogul Cylinders V8551NAIC 1-1/2" AirTeq/Norment IC Cylinder with Mogul Cam 2.245" 0.120" 1.590" 2.0" V8551BRIC 1-1/2" R.R. Brink IC Cylinder with #11 Mogul Cam 2.245" 0.120" 1.590" 2.0" V8551SSIC 1-1/2" Southern Steel IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" V8551FAIC 1-1/2" Folger Adam IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" V8551ADIC 1-1/2" Adtech IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" Twin Exclusive Interchangeable Core Mogul Cylinders E8551NAIC 1-1/2" AirTeq/Norment IC Cylinder with Mogul Cam 2.245" 0.120" 1.590" 2.0" E8551BRIC 1-1/2" R.R. Brink IC Cylinder with #11 Mogul Cam 2.245" 0.120" 1.590" 2.0" E8551SSIC 1-1/2" Southern Steel IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" E8551FAIC 1-1/2" Folger Adam IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" E8551ADIC 1-1/2" Adtech IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" Twin 6000 Classic Interchangeable Core Mogul Cylinders 8551NAIC 1-1/2" AirTeq/Norment IC Cylinder with Mogul Cam 2.245" 0.340" 1.260" 2.0" 8551BRIC 1-1/2" R.R. Brink IC Cylinder with #11 Mogul Cam 2.245" 0.340" 1.260" 2.0" 8551SSIC 1-1/2" Southern Steel IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551FAIC 1-1/2" Folger Adam IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551ADIC 1-1/2" Adtech IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" ASSA 1-1/2" Temporary Interchangeable Construction Core Mogul Cylinders 8551NAICR 1-1/2" AirTeq/Norment IC Cylinder with Mogul Cam 2.245" 0.340" 1.260" 2.0" 8551BRICR 1-1/2" R.R. Brink IC Cylinder with #11 Mogul Cam 2.245" 0.340" 1.260" 2.0" 8551SSICR 1-1/2" Southern Steel IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551FAICR 1-1/2" Folger Adam IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" 8551ADICR 1-1/2" Adtech IC Cylinder without Cam 2.245" 0.120" 1.590" 2.0" For temporary cores refer to Red Core on page 4.

25 Page: 24 High Security Mogul Component Parts Mortise Cylinder Key: 1-1/8" Dummy Cylinder 1-1/2" Dummy Cylinder HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) BD Body Diameter Model#/Cam Notes Size Description HD HT BL BD ASSA Mogul Dummy Cylinders 8551DUM 1-1/8" Mogul Dummy Cylinder 2.245" 0.340" 1.260" 2.0" 8551SSDUM 1-1/2" Mogul Dummy Cylinder 2.245" 0.120" 1.590" 2.0" ASSA Mogul Interchangeable Core Housings /2" Mogul IC Housing 2.245" 0.120" 1.590" 2.0" To order Interchangeable Cores separately see pages for details. Mogul Cylinder Parts Model# Description /8" Mogul Cylinder Shell /2" Mogul Cylinder Shell /8" Mogul Cylinder Plug /2" Mogul Cylinder Plug Cam Adaptor for 1-1/2" Cylinder Mogul Cylinder Plug Cover Plate Mogul Chamber Screw Wrench Model# Twin Exclusive Description /8" Mogul Cylinder Shell /2" Mogul Cylinder Shell /8" Mogul Cylinder Plug /2" Mogul Cylinder Plug Cam Adaptor for 1-1/2" Cylinder Mogul Cylinder Plug Cover Plate Mogul Chamber Screw Wrench

26 Page: 25 Rim Cylinders Commonly used on apartment and condominium doors, ASSA rim cylinders are used on vertical deadbolt locks and are also designed for commercial exit and panic devices. Available with either horizontal/vertical break-off or lazy-motion type break-off tailpieces, ASSA rim cylinders can be ordered with the standard or the Sargent rim exit device mounting patterns. The standard rim cylinder can be easily converted to a mortise cylinder by simply replacing the rim tailpiece assembly with the appropriate cam. Benefits: Drill resistant cylinder housing and plug Case-hardened steel inserts and stainless steel pins Two independent locking mechanisms to ensure security and optimum pick resistance Inactive false grooves on side pins designed to catch picking tools Extremely close tolerances Can be easily rekeyed in the field Standard and Sargent hole pattern available Standard rim cylinder is easily converted to mortise cylinder Warranty: ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life Certification: All ASSA Twin Series Rim cylinders are U.L. 437 Listed as well as ASTM F Certified for standard test methods for Detention Locks Technical Information: Available with limited rotation and/or unidirectional features Cylinder housing and plug are made of high quality brass Stainless steel top pins Bottom pins and master pins are nickel silver Finishes: BHMA Symbol U.S. Symbol Euro Finish Description 625 US Bright Chrome 626 US 26D 13 Satin Chrome 605 US 3 20 Bright Brass 606 US 4 23 Satin Brass 612 US Satin Bronze 624 US 10B 46 Dark Oxidized Bronze

27 Page: 26 Rim Cylinders Exploded View Standard-pin Tumbler System Drill-resistant Cylinder Housing Tailpiece Rim Cylinder Mounting Screws Drill-resistant Cylinder Plug System Code Rim Cylinder Mounting Plate Coded Side Bar Locking System Side Bar Code Cover Strip Top Pins Cylinder Springs Master Pins Large Key-bow Bottom Pins Cylinder Housing Cylinder Plug Available Tailpieces Sidebar Sidebar Springs Side Pins Side Pin Spring

28 Page: 27 Rim Cylinders HD R Mortise Cylinder Key: HD Head Diameter HT Head Thickness BL Body Length (Includes Cam) R Retainer Available Tailpieces HT BL H/V L Model#/Tailpiece Notes Description HD HT BL BD Rim Cylinders V6551- (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" V7551- (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" V8551- (Specify Tailpiece) ASSA Mogul (Detention) Cylinder 2.245" 0.340" 1.425" 2.0" VS6551- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin Exclusive Rim Cylinders E6551- (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" E7551- (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" E8551- (Specify Tailpiece) ASSA Mogul (Detention) Cylinder 2.245" 0.340" 1.425" 2.0" ES6551- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin 6000 Classic Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" (Specify Tailpiece) ASSA Mogul (Detention) Cylinder 2.245" 0.340" 1.425" 2.0" S6551- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin Pro Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" S6151- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin Maximum Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" S8851- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin Maximum Medium Security Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" Twin Low Rim Cylinders L651- (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" L751- (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" LS651- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin Low 600 Series Rim Cylinders 651- (Specify Tailpiece) 1-1/8" Rim Cylinder 1.366" 0.138" 1.290" 0.060" 751- (Specify Tailpiece) Corbin Jumbo Rim Cylinder 1.643" 0.170" 1.270" 0.060" S651- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) 1.366" 0.138" 1.290" 0.060" Twin Maximum available with C4 CLIQ Technology. Example: 8851-H x CLIQ x 626 x Sidebar x Comp Available in special function cylinders, see page 4.

29 Page: 28 Rim Cylinder Component Parts Cylinder Shell Cylinder Plug Model# Notes Description * SARGENT Drilled Rim Shell * 1-1/8" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug Twin Exclusive/Twin 6000 Classic * SARGENT Drilled Rim Shell * 1-1/8" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug Twin Pro/Max * SARGENT Drilled Rim Shell * 1-1/8" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * Indicates Finished Components. Specify Profile.

30 Page: 29 Mortise and Rim Interchangeable Core Cylinders Designed with both security and convenience in mind, the ASSA Large Format Interchangeable core cylinder is perfect for apartment buildings, dormitories, classrooms, and other applications requiring instant rekeying capabilities. This versatile cylinder is adaptable to a wide variety of manufacturers locksets including the ASSA Number 2 padlock and ASSA 6000 deadbolt series and can be integrated into master keyed systems that use both standard and interchangeable cylinders. Available in the standard ASSA large format as well as the Schlage, Yale 6 pin, and Sargent 6 pin large formats, all ASSA Interchangeable core cylinders are listed under U.L. 437, a set of tests for determining the cylinder's physical resistance against various forms of attack and performance that features our patented key control ensuring the maximum protection from unauthorized key duplication. Benefits: Easily rekeyed openings in the field Can be used in master key system with standard locks Available in multiple manufacturers formats Drill resistant cylinder housing and plug Case-hardened steel inserts and stainless steel pins Two independent locking mechanisms to ensure security and optimum pick resistance Inactive false grooves on side pins designed to catch picking tools Warranty: ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life Certification: All ASSA Interchangeable Core cylinders are U.L. 437 Listed as well as ASTM F Certified for standard test methods for Detention Locks Technical Information Available for 1-1/4" mortise and rim cylinders Build-up pins in first four positions operate control feature Cylinder housing and interchangeable core are made of high quality brass Stainless steel top pins Bottom pins and master pins are nickel silver Finishes: BHMA Symbol U.S. Symbol Euro Finishes Description 625 US Bright Chrome 626 US 26D 13 Satin Chrome 605 US 3 20 Bright Brass 606 US 4 23 Satin Brass 612 US Satin Bronze 624 US 10B 46 Dark Oxidized Bronze