The Numbers Don t Lie

Transcription

1 Fleet managers can reduce their operating expenses by automating their reconciliation processes from inventory data collection to compliance reporting through a technologydriven program such as OPW s Phoenix Fuel Management Software. Fuel Sites That Replace Manual Reconciliation Processes With A Technology-Driven Reconciliation Program Reduce Operating Expenses and Minimize Inventory Losses By Bobby Hayes Most U.S. commercial fleets were completely unprepared for the steep increase in fuel prices that began in The unexpected rise in fuel expenses decimated many operating budgets. As fuel costs continued to climb, organizations unilaterally looked for ways to reduce costs by decreasing overhead and eliminating unnecessary fuel expenses in every instance possible. Although U.S. fuel prices have recently shown some improved stability, fuel remains a leading expense for any operation. Fuel management and consumption audits performed at the height of the fuel price spike, and which have continued through today, show that fuel inventory losses as a result of unplanned circumstances remain a challenge for many of today s government, fleet, commercial, bulk and retail fueling operations. If left unchecked, these unaccounted fuel losses can wreak havoc on a fuel site s bottom line. Due to manual reconciliation s potential for inaccurate calculations, fueling operations that rely on manual methods to perform Statistical Inventory Reconciliation (SIR) for inventory analysis are at risk of worsening their unaccounted fuel losses. In short, site operators cannot solve the source of the fuel loss if they don t realize it s happening simply because their math is off. All fuel sites are vulnerable to fuel losses, which can result from among other things theft, shrinkage, fuel system leaks, short deliveries and meter drift. If these issues are not promptly identified and addressed as part of a reliable reconciliation procedure, the losses can quickly add up and drain an organization s operating budget. Page 1

2 For example, a 2012 audit of Kauai County, Hawaii, fuel costs and consumption showed that the county purchased 154,655 gallons of diesel fuel for fiscal year , but fueling system data showed that only 140,294 gallons were dispensed, for a total of 14,361 unaccounted gallons of fuel. With the national average of diesel fuel prices hovering around $2.57 a gallon in 2009, that difference equated to approximately $37,000 worth of unaccounted fuel. As fleet- and retail-fueling operations continue to reevaluate their financial standings in order to adapt to current market conditions, they are deploying lossprevention and efficiency-enhancing strategies. This article will illustrate how an automated reconciliation process that is facilitated through comprehensive fuel management software can reduce unaccounted fuel losses while significantly increasing operational efficiencies, reducing labor costs and improving site safety. Source: Audit of Fuel Costs, Consumption and Management from The Challenge: Manual Reconciliation Is Costly The majority of commercial fuel sites continue to practice manual SIR to track and report inventory levels. However, manual inventory tracking and reporting is expensive, tedious and fraught with potential for human error. Manual reconciliation requires vigilance, discipline and tremendous attention to detail from the personnel charged with performing the task. To obtain accurate inventory data via manual reconciliation methods, a site operator must record inventory measurements which includes every fuel product on site, the amount of water in each product s tank, the amount of fuel sold or dispensed and the amount of fuel deliveries every day that the fuel site is in operation. Measurements need to be collected at the same time each day so that no dispensing or deliveries occur between the time when the volume in the tank and the volume dispensed is measured. Once the data is gathered, the fuel site operator must calculate the variance the difference between the amount of fuel reported being delivered and being dispensed through formulas that are reminiscent of long-form income tax preparation: subtract the value of column O from the value of column N to get the value of column P. Manual reconciliation calculations are typically executed longhand or with the assistance of a spreadsheet. Variance is not only a benchmark for the accuracy of inventory data collection, but it is a measure of the overall fitness of a fuel system. Many states require fuel sites report their variance as part of their leak detection documentation. The U.S. Environmental Protection Agency s (EPA) standard for reconciliation is 1% of a site s throughput, but many states have tighter regulations than the EPA. For example, fuel sites in Maryland can t have a variance greater than 50 gallons over 8 days. In Connecticut the total variance must not exceed 0.5% of sales volume. Failure to meet state-mandated variance thresholds typically result in compliance fines and expensive corrective actions, including third-party tank tests. In addition, other Page 2

3 variance remediation efforts performed by fuel sites are sometimes misguided and potentially unnecessary expenses. Without data-driven evidence supported through electronic reporting, site operators speculate at the root causes for unacceptable variance levels and, frequently, rely on historical or anecdotal knowledge to guide their corrective actions. Many fuel site operators will pay to calibrate their dispenser meters without knowing for sure if meter drift is the reason for the variance. From the third-party service required to perform the calibration, to the equipment downtime needed to calibrate meters, to the cost of obtaining a Weights and Measures approval, these expenses are costly and sometimes completely unnecessary. In addition, fleets particularly government fleets that are unable to quickly trend SIR data frequently run out of fuel because they are unable to detect patterns in fuel consumption. A tank void of fuel can lead to submersible pump motors failure, excessive dispenser filter replacement and damage to vehicles from fuel contaminated by the sludge on the bottom of the tank. SIR is also a significant drain on resources needed to gather and calculate the data. Even at small fuel sites, SIR requires daily oversight, which can be particularly burdensome for small staffs; larger operations with multiple sites could require a coordinated team of personnel to perform SIR. In the case of small staffs struggling to cover the duties of coworkers on vacation, employees may not be sufficiently cross-trained to perform SIR accurately or they fail to perform the inventory analysis altogether, causing the site to fail its compliance audit. Manual reconciliation also can be a safety issue requiring personnel to be in the path of vehicle traffic while collecting inventory data. Data collected through manual SIR is only as good as the personnel and equipment gathering the data. Unfortunately, the tools used to obtain inventory measurements wooden gauge sticks aren t exactly high-tech. The sticks, which are lowered into the tank to measure product levels, provide inconsistent readings (most data recordings are recorded to the nearest 1/8 of an inch). Gauge sticks also are widely misused. Site operators often continue to use deteriorated sticks long after they should have been retired, or modify the stick through mechanical extensions to make measuring easier. And the problems don t end there. Supply deliveries are especially difficult to evaluate through manual reconciliation because real-time tank gauge and dispenser data reconciliation is nearly impossible. Consistent timing of data collection is essential. Math errors and problems with spreadsheet formulas also increase the opportunity for inaccuracies. In the event a fuel site operator calculates an unacceptable level of variance through manual reconciliation methods, determining the cause of the variance can be cumbersome at best. Oftentimes, it takes 30 to 60 days to simply identify a loss is occurring, and that s before resources have been assigned to troubleshoot the source of the loss. Imagine the time required to review 30 days of camera footage in order to expose a fuel thief, not to mention the amount of inventory that is lost while the investigation takes place. A technology-driven reconciliation solution such as OPW s Phoenix Fuel Management Software eliminates manual reconciliation s time-consuming and error-prone processes. Page 3

4 The Solution: Automated Reconciliation Reduces Expenses As commercial and retail fuel site operators look for ways to offset continuously escalating operating costs, they are becoming increasingly educated about the financial vulnerabilities caused by manual SIR practices. A software-based, automated site reconciliation and data management program provides fuel site operators with the tools needed to eliminate the data inaccuracies and expenses resulting from manual statistical inventory analysis. When used in conjunction with a compatible tank gauge and fuel site controller, OPW s Phoenix Fuel Management Software for retail and commercial applications provides total site reconciliation, completely eliminating the need to perform manual SIR at fuel sites. The fuel management software automates data gathering, collecting and reporting processes, and with proper configuration, minimizes the opportunity for data inaccuracies. By transferring the data collecting, calculation and reporting tasks from site personnel to a technologydriven solution, reconciliation software packages such as those available from OPW offer many benefits in addition to cost savings, error reduction, simplified compliance reporting and improved site safety. Advantages of Automated Reconciliation Real-time data collection and calculation provides up-to-the-moment inventory information that is both comprehensive and accurate Centralizes inventory data management, which is especially beneficial to multi-site fueling operations Can isolate the fuel delivery data from the dispensed data in real time Programs designed to simultaneously poll multiple TCP/IP-based fuel control systems dramatically reduce data collection times for multi-site fueling operations Enhanced odometer checking reveals obvious, incorrect mileage entries such as single, sequential or repeated numbers Multi-level access and security features enable cross-training, accountability and tiered access Electronic archives simplify data retrieval and management Export data to third-party database, spreadsheet and fleet maintenance programs for further processing Versatile reconciliation software packages are designed to be compatible with multiple tank gauge brands Best-in-class reconciliation software packages streamline tank-strapping configuration procedures by eliminating the double work of inputting tankstrapping data into the tank gauge and software Fuel management software, which is used as part of an integrated fuel management solution, can frequently capture return on investment in less than a year. As the only petroleum equipment manufacturer in the industry that provides both fuel control and tank monitoring equipment, OPW leads the industry in integrated, costsaving fuel management solutions. OPW s Windowsbased Phoenix Fuel Management Software features more than 60 reporting functions and simplifies reconciliation reporting through automatic and ondemand transaction polling processes. OPW s Phoenix Fuel Management Software has the ability to account for any fuel dispensed while a fuel delivery is in progress, ensuring real-time, accurate inventory information. Page 4

5 Conclusion: Investing in the Future As gas prices have demonstrated a measure of stability recently, today s commercial fleets are looking to make equipment investments that have been delayed since fuel prices began consuming their operating budgets in Today s fuel retailers are continuously chasing evolving payment technology and data security standards that require significant capital investments. With expenses continuing to mount, fuel site operators need to carefully monitor their fuel assets. Squandering money through unaccounted fuel losses and costly reconciliation procedures will deplete capital resources needed for future growth. Manual SIR is a dubious process that leads to unnecessary costs for government, commercial, bulk, fleet and retail fuel sites of every size and configuration. By instantly reconciling dispensing and tank gauging data to provide accurate, real-time inventory calculations, OPW s Phoenix Fuel Management Software can eliminate many expenses associated with the cumbersome manual reconciliation process, helping to quickly identify the source of fuel losses and reducing management overhead. Fueling operations that adopt a technology-driven reconciliation solution will position themselves to weather future economic challenges with greater ease and prime their site to generate incremental savings for years to come. OPW s Phoenix Fuel Management Software s Tank Reconciliation Report synthesizes delivery, volume, in-tank water level, variance and more, eliminating the need to manually gather, calculate and report tank reconciliation data. About the Author: Bobby Hayes is the Domestic Sales Manager at OPW Fuel Management Systems in Hodgkins, IL. He can be reached at (770) or robert.hayes@opwglobal.com. OPW is a global leader in fully integrated fluid handling, management, monitoring and control solutions for the safe and efficient handling of critical petroleum-derived fluids from the refinery to the commercial and retail points of consumption. OPW is an operating company within the Fluids segment of Dover Corporation. For more information about OPW, please visit Page 5