1 Polycom Scheduling Guide for Microsoft Outlook 5.0 April G
2 Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with Polycom s products are trademarks and/or service marks of Polycom, Inc., and are registered and/or common-law marks in the United States and various other countries. All other trademarks are the property of their respective owners. Patent Information The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications held by Polycom, Inc Polycom, Inc. All rights reserved. Polycom, Inc Willow Road Pleasanton, CA USA No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating into another language or format. As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software contained within its products. The software is protected by United States copyright laws and international treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording). Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible for printing or clerical errors. Information in this document is subject to change without notice. ii
3 Contents 1 Setting Up the Polycom Scheduling Plugin for Microsoft Outlook Set Up a Video Conferencing Calendar Enter the Polycom Scheduling Plugin Logon Settings Configure Attendee Response Tracking View the Scheduling Plugin Version Uninstall the Scheduling Plugin for Outlook Scheduling Video Meetings Schedule a Video Meeting Edit a Scheduled Meeting Advanced Scheduling Operations Edit Conference Settings Select a Bridge for a Conference Create a Cascaded Conference Across Multiple Bridges Index Polycom, Inc. iii
4 Polycom Scheduling Guide for Microsoft Outlook iv Polycom, Inc.
5 Setting Up the Polycom Scheduling Plugin for Microsoft Outlook 1 This chapter describes how to install and set up the Polycom Scheduling Plugin for Microsoft Outlook. It includes these topics: Install the Scheduling Plugin for Outlook Set Up a Video Conferencing Calendar Configure Attendee Response Tracking Enter the Polycom Scheduling Plugin Logon Settings View the Scheduling Plugin Version Set Up a Video Conferencing Calendar Install the Scheduling Plugin for Outlook To install the Scheduling Plugin for Outlook you need: Microsoft Outlook 2003 SP2 or Outlook 2007 The procedures in this document describe how to perform these tasks when working in Microsoft Outlook Refer to the Microsoft Outlook online help, if you have any questions about how to perform the tasks in other Outlook versions. An internet browser Adobe Flash Player 9.x or 10.0.x (available at The IP address of a Polycom Converged Management Application (CMA) system and your username, password, and domain for the system. If the Polycom CMA system is integrated with your company s enterprise directory, these may be your network credentials. See your system administrator for this information. Administrative rights to the client system Polycom, Inc. 1
6 Polycom Scheduling Guide for Microsoft Outlook To install the Scheduling Plugin for Outlook 1 Ensure that Microsoft Outlook is closed. 2 Open a browser window and in the Address field enter the Polycom CMA system IP address. 3 When the login screen appears, enter your Username and Password. 4 If necessary, select a different Language or Domain. 5 Click Login. 6 From the toolbar, click Downloads. 7 Click Polycom Scheduling Plugin for Microsoft Outlook. 8 Save the installation file to your local computer. 9 Close the Downloads screen and click Log Out. 10 Run the installation file by double-clicking the downloaded file and following the installation instructions. When prompted, read the license agreement and click Accept to accept the terms and continue. Set Up a Video Conferencing Calendar To schedule video conferencing meetings, you must first set up a Video Conferencing calendar. You can either associate the Video Conferencing calendar with your existing Microsoft Outlook system calendar or keep two separate calendars. Microsoft Outlook only tracks attendee responses to meetings scheduled on the Outlook system calendar. If you keep two separate calendars, Microsoft Outlook cannot track responses to meetings scheduled on the Video Conferencing calendar. To associate a Video Conferencing calendar with your existing calendar 1 Open Microsoft Outlook. 2 Right-click on the Calendar frame and select Properties. The Calendar Properties dialog box opens at the General tab. 3 From the When posting to this folder, use.. drop-down list, select Forms. The Choose Form dialog box opens. 4 Select Personal Forms Library from the Look In list. 5 Select Polycom Video/Audio Meeting and click Open. 6 Make sure Polycom Video/Audio Meeting is selected in the When posting to this folder field and then click OK. 2 Polycom, Inc.
7 Setting Up the Polycom Scheduling Plugin for Microsoft Outlook To create a separate Video Conferencing calendar 1 Open Microsoft Outlook. 2 If you have Microsoft Outlook 2007: a Click Tools > Options. The Options dialog box opens at the Preferences tab. b Select the Other tab. c In the General section of the Other tab, click Advanced Options. d In the Advanced Options dialog box, enable Show Developer tab in the Ribbon and click OK. e Close the Options dialog box. 3 Select File > New > Folder. 4 In the Name field of the Create New Folder dialog box, enter a new calendar name (for example Video Conferencing Calendar). 5 From the Folder contains drop-down list, select Calendar Items and click OK. 6 From the Microsoft Outlook toolbar, select Tools > Forms > Choose Form. 7 From the Look In drop-down list of the Choose Form dialog box, select User Templates in File System and click Browse. 8 Browse to Program Files > Polycom > Polycom Scheduler Outlook Plug-in and click OK. 9 Select CMAMeeting.oft and click Open. 10 Publish the form as follows: a From the Look In drop-down list, select Personal Forms Library. b In the Display Name field, enter a new form name and click Publish. c Close the calendar item without saving it. d Right-click the new Calendar icon and select Properties. The Calendar Properties dialog box opens at the General tab. e From the When posting to this folder drop-down list, select Forms. The Choose Form dialog box opens. f Select Personal Forms Library from the Look In list. g Select the form you created in step b and click Open. h Make sure the form you created is selected in the When posting to this folder field, then click OK. Polycom, Inc. 3
8 Polycom Scheduling Guide for Microsoft Outlook Enter the Polycom Scheduling Plugin Logon Settings Before you can schedule a video meeting, you must enter these logon settings into the plugin. To enter your logon settings 1 From the Microsoft Outlook toolbar, select Video > Logon Settings. The Polycom Scheduling Plugin Logon Settings dialog box opens. 2 If necessary, select a different Language. 3 Enter the same Server IP address that you entered to download the Scheduling Plugin. 4 Either enter the same Username and Password that you used to log into the Polycom CMA system or select the Sign in using network login credentials option. 5 If necessary, select a different Domain. 6 If the video conferencing management system is operating in secure mode, select the Https option. 7 Click OK. You can view and change these settings at any time, by selecting Video > Logon Settings. Configure Attendee Response Tracking Microsoft Outlook automatically tracks attendee responses to video conferencing meeting requests, as it does other meeting requests, by displaying response s. By default, the video conferencing management system also automatically tracks attendee responses when Microsoft Outlook displays response s. However, this automatic response tracking requires interaction with the video conferencing management system and may change the meeting information. Two configuration settings control attendee tracking: Accept/Decline Auto Tracking. Use this setting to turn off automatic response tracking in the video conferencing management system. Microsoft Outlook continues to automatically track responses, but the video conferencing management system does not. Send Update on Accept/Decline Processing. If you select the Accept/Decline Auto Tracking option, use this setting to choose whether or not processing of accept/decline responses allows meeting dial-in 4 Polycom, Inc.
9 Setting Up the Polycom Scheduling Plugin for Microsoft Outlook information to change. If it does change, the video conferencing management system sends updates to attendees with the new dial-in information. To configure auto-tracking 1 From the Microsoft Outlook toolbar, click Video. 2 Check (to accept) or uncheck (to decline) Accept/Decline Auto Tracking. 3 If you accepted auto-tracking in step 2, check (to send) or uncheck (to refrain from sending) Send Update on Accept/Decline Processing. View the Scheduling Plugin Version If you encounter difficulties scheduling meetings through your scheduling plugin, you may need to report the scheduling plugin version. To view the scheduling plugin version >> From the Outlook Calendar, select Video > About Polycom Scheduling Plugin. A dialog box displays the plugin version number. Uninstall the Scheduling Plugin for Outlook If you uninstall the Scheduling Plugin for Outlook, you should restore the default calendar form and remove the Video Conferencing calendar. To uninstall the scheduling plugin >> On your local system, go to Control Panel > Add or Remove Programs. To restore the default calendar form and remove the Video Conferencing calendar form 1 Right-click the Calendar icon and select Properties. The Calendar Properties dialog box opens. 2 In the General tab, from the When posting to this folder, use drop-down list, select Appointment. 3 In the Forms tab: a Select Video Conferencing Meeting and click Manage. Polycom, Inc. 5
10 Polycom Scheduling Guide for Microsoft Outlook The Forms Manager dialog box opens. b Select the Video Conferencing calendar created in step 4 on page 2. c Click Delete and click Yes to confirm the deletion. d Click Close. 4 Click OK. 6 Polycom, Inc.
11 2 Scheduling Video Meetings This chapter describes how to use the Polycom Scheduling Plugin for Microsoft Outlook. It includes these topics: Schedule a Video Meeting Edit a Scheduled Meeting In addition to these procedures, the Polycom Converged Management Application system supports all the standard Microsoft Outlook procedures for rescheduling and canceling meetings. For information on these procedures, see the Microsoft Outlook online help. Schedule a Video Meeting To schedule a video meeting 1 Open your Microsoft Outlook or Video Conferencing calendar. Microsoft Outlook only tracks attendee responses to meetings scheduled on the Outlook system calendar. If you keep two separate calendars, Microsoft Outlook cannot track responses to meetings scheduled on the Video Conferencing calendar. 2 From the Microsoft Outlook toolbar, go to Actions > New Polycom Video/Audio Meeting. Do not select Plan a Meeting. It does not use the Video Conferencing system. A Polycom Video/Audio Meeting form appears. Polycom, Inc. 7
12 Polycom Scheduling Guide for Microsoft Outlook 3 Select Invite Attendees and add attendee names. To add attendees from within your system domain, click To and in the Select Attendees and Resources dialog box, select required attendees, optional attendees, and rooms. To add guest attendees (attendees from outside your system domain), enter their addresses. As you add attendees and rooms, they appear in the Video Resources tab (described in step 8). 4 Enter a meeting name in the Subject and set a meeting Start Time and End Time. 5 To make the meeting recurring: Once you schedule a meeting, you cannot later change whether the meeting is nonrecurring or recurring. The Polycom CMA system does not support a recurrence frequency of Yearly or a recurrence range of No End Date. a Click Recurrence and in the Appointment Recurrence dialog box, set:» Recurrence frequency (Daily, Weekly, or Monthly)» Recurrence range (Start date and End After occurrences or End by date) The maximum number of recurrences is 364. b Click OK. 6 Click Scheduling Assistant to view attendee availability. Microsoft Outlook tracks attendee availability. 7 Click Video Resources to view device availability. The Polycom CMA system tracks endpoint availability. 8 Select Use CMA. 9 For a Video conference, you can change the template by clicking Default Template and selecting a different template. Conference templates provide default conference settings. When you select a different template, you are changing the default conference settings for your conference. 10 For an Audio Only conference: a b Change the Conference Type to Audio Only. Change the template by clicking Default Audio Template and selecting a different template. 8 Polycom, Inc.
13 Scheduling Video Meetings When you create an Audio Only conference, the conference is automatically identified as Dial-In and requires an MCU. 11 Adjust the conference date and time as needed to match attendee and device availability. a Review the Call Info column to ensure that each attendee has the required information. As needed, select Edit for the attendee and change the Call Info including how the attendee will join the conference. Setting In Person Audio Only (Dial-In Bridge) Use Video Description The participant will attend the conference by physically joining another participant who is attending the conference. The participant will attend the conference by calling into the conference using the telephone number provided by the system. The participant will attend the conference using a video endpoint system. When an attendee is shown as attending In Person, you may want to ask a system administrator to manually associate a device with that attendee. Then you can return to this procedure and select that device for the attendee. You can also manually specify call information for In Person attendees. By default, guest attendees are shown as attending In Person. b c For attendees with an audio endpoint, set Dial Type to IP or ISDN as required. For attendees with a video endpoint:» Set the Bit Rate, Dial Options, and Dial Type as required. You can change the connection speed for an endpoint up to the maximum speed specified by the conference template.» If you select Dial Out and a Dial Type of IP, enter the guest s phone Number.» If you select Dial Out and a Dial Type of ISDN and the system must use a specific dialing prefix to call the guest, select Use Modified Dial Number and enter the guest s complete phone number including prefix, country code, area or city code, and phone number. Polycom, Inc. 9
14 Polycom Scheduling Guide for Microsoft Outlook» If you select Dial Out and a Dial Type of ISDN and the system does not need to use a specific dialing prefix to call the guest, select the appropriate Country and enter the guest s Area/City Code and phone Number. d Click OK. 12 Once you ve added your attendees, you can assign them leadership roles: a To assign an attendee as lecturer, in the Lecturer field select an attendee s name from the list. b To assign an attendee as video chairperson, in the Video Chairperson field select an attendee s name from the list. If the Lecturer or Video Chairperson features are not available, then either you do not have permission to implement these features or the selected template does not support these features. To be assigned Lecturer, an attendee must have a manageable video device. 13 If you have advanced scheduler permissions, now is the time to edit conference settings and make bridge selections. For more information, see Advanced Scheduling Operations on page If you re finished with the meeting request, click Send. If the system warns you about scheduling problems, resolve them now. Typical problems involve unavailable endpoints, unavailable rooms, or insufficient bandwidth. The video conferencing management system verifies that bandwidth and other video resources are available and reserves them. Microsoft Outlook adds the meeting to the appropriate calendar and sends an invitation to each attendee. The invitation shows the endpoint that the attendee should use and the dial-in number and PIN. Attendees who want to use another video endpoint should contact you or the video conferencing management system operator to modify their meeting settings. Edit a Scheduled Meeting You can edit future scheduled meetings. You cannot edit active or past meetings. Also, you cannot change a non-recurring meeting to a recurring meeting or a recurring meeting to a non-recurring meeting. If you edit a recurring meeting, the changes apply to all future meeting instances but not to past or ongoing meeting instances. 10 Polycom, Inc.
15 Scheduling Video Meetings If you edit one instance of a recurring meeting and later edit the entire series of meetings, the change that you made to the one instance are lost. Once a meeting is scheduled, editing the meeting and selecting a different template does not change the meeting settings. The video conferencing management system does not store the template as part of the meeting information, only the settings selected when the meeting was created. To use a different template, you must delete and recreate the meeting. To edit a future meeting 1 Open your Microsoft Outlook or Video Conferencing calendar. 2 Double-click the meeting of interest. The Polycom Video/Audio Meeting form appears. 3 If you used a template other than the default when you created the meeting, reapply the template. 4 Make the required changes to the meeting dates, participants, rooms, or other settings. For information on performing these tasks, see Schedule a Video Meeting on page 7. 5 Click Save and Close or Send Update. The video conferencing management system changes required resources as needed. Polycom, Inc. 11
16 Polycom Scheduling Guide for Microsoft Outlook 12 Polycom, Inc.
17 3 Advanced Scheduling Operations This chapter describes how users with advanced scheduler permissions have more options when scheduling conferences using the Polycom Converged Management Application (CMA ) system. When scheduling conferences, users with advanced scheduler permissions can: Edit Conference Settings Select a Bridge for a Conference Create a Cascaded Conference Across Multiple Bridges Edit Conference Settings If you have Scheduler Permissions and an Advanced Scheduling level, you can overwrite certain conference template settings as described here. However, be careful when doing so. If you have an environment with mixed MCU types (e.g., with both Polycom MGC and RMX systems), and the conference you schedule is hosted on a Polycom RMX 2000 system, some of the settings you specify here may be overridden by the RMX profile. A profile is a collection of advanced conference settings that reside on the MCU (Polycom MGC or RMX system). Only an RMX profile can override conference template settings. For more information about conference templates, profiles, and your conferencing configuration, contact your Polycom CMA system administrator. Two conferences scheduled with the same template may have different settings and behavior if they land on different types of MCUs. You can edit conference settings only for scheduled conferences. You cannot edit conference settings for active conferences. Polycom, Inc. 13
18 Polycom CMA System Polycom Scheduling Guide for Microsoft Outlook To edit the conference settings 1 On the conference scheduling page, as you are adding or editing a conference, click Edit Conference Settings. 2 As needed, configure these settings on the Conference Settings dialog box. The settings that you can edit may depend on the template selected. Setting Conference Password Enable Chairperson Description By default, the system assigns an eight-digit Conference Password and provides this password to participants within the content of the conference notification . You can change this password to another four- through eight-digit number. You can select a video chairperson to control the conference from his or her video endpoint system. The video chairperson must have a video endpoint system and Chairperson conferences require an MCU. Notes If the conference template has the Conference Requires Chairperson parameter enabled, then Enable Chairperson is automatically selected and cannot be changed. If a conference is scheduled on a Polycom RMX 2000 system and the RMX profile has Conference Requires Chairperson selected but the template does not, and the conference is scheduled without a chairperson, then all users will remain in the waiting room and will not be able to join the conference. Polycom RMX 1000 systems do not support the Chairperson feature. Chairperson Password If Enable Chairperson is selected, the system assigns an eight-digit Chairperson Password and provides this password to the video chairperson in a separate . If Enable Chairperson is selected, the chairperson must enter this eight-digit password at his or her video endpoint to assume control of the conference. You can change this password to another four- through eight-digit number. 14 Polycom, Inc.
19 Advanced Scheduling Operations Setting Dial Options Description You have three options: To create a conference for which the same dial-in information and a PIN code are assigned to all conference participants, use the Dial-In setting. This setting allows participants to dial in from an audio or video endpoint and connect to the same conference on the MCU. To dial out to all participants in the conference, use the Dial-Out setting. To allow participants both options, select Dial-In+Dial-Out. Note When you change a conference from Dial-In to Dial In+Dial Out, the selected resources remain set to Dial-In. You must change them manually. Always Use MCU Video Mode Bit Rate This setting forces the conference to an MCU and prevents video endpoints from connecting to each other directly. This setting is automatically selected and cannot be changed when Audio Only is the conference type or when Enable Chairperson is selected. Determines the initial layout on a video endpoint's monitor for a multipoint conference that requires an MCU. The options are: Switching. Indicates that the display changes each time the speaker changes, and everyone sees the current speaker. Continuous Presence. Displays several panels on the monitor, each showing a different participant, and allows you to see all conference participants at once. You can select a specific layout, with a certain number of windows open. Automatic Layout is a continuous presence layout, in which the number of participants determines the number of panels. Specifies the maximum connection speed for endpoints in the conference. Individual endpoints that specify a lower connection speed connect at that lower speed. Endpoints that specify a higher connection speed connect at the speed identified in the conference template. If you select a higher speed than an endpoint can support, the speed for that endpoint is reduced; however, the conference uses the default connection speed for endpoints that can match it. If you place the calls through an endpoint with an embedded MCU, the behavior depends on the capabilities of that endpoint. Polycom, Inc. 15
20 Polycom CMA System Polycom Scheduling Guide for Microsoft Outlook Setting Bit Rate (continued) Description When the dial speed is higher than the number of channels defined in the H.320 service for the endpoint, you receive a warning. To continue, lower the dial speed to less than or equal to the ISDN capability of the endpoint. Higher speed is important for high-quality video in a conference. Because higher speeds use greater bandwidth, scheduling a high-bandwidth conference may limit the number of conferences that you can reserve at one time. Note The bit rate can be set at the network level, the endpoint level, and the conference level. If there is a discrepancy between these bit rate settings, the system implements the lowest bit rate setting. The only exception, is that the bit rate in the RMX profile takes precedence over the bit rate in the conference settings. People + Content Controls the ability for one endpoint to send two types of data a data stream and a video stream over the same bandwidth to display people and content. The receiving endpoint handles the two video streams differently and may display them on separate screens or through video switching mode. Endpoints that do not support the selected method connect with either video through IP or audio only through ISDN. Select from these available settings: None. Select this option when dual data streams are not required. People +Content. This enables the industry standard H.239 dual streams for endpoints that support H.239 or the Polycom proprietary People+Content dual streams for older Polycom endpoints without H.239 capabilities. The MCU requires that conferences with People + Content use a minimum speed of 192 K. People and Content VO. This Polycom proprietary technology works with PictureTel endpoints. Select this option for older endpoints. Visual Concert PC. Select this option for use with Polycom ViewStation MP/512/SP/323 endpoints. Visual Concert FX. Select this option for use with Polycom ViewStation FX/EX and VS4000 endpoints. Duo Video. This setting supports IP and ISDN and is available with Tandberg endpoints, in which one part of the conference is set as the video conference and the other as the presentation conference. 16 Polycom, Inc.
21 Advanced Scheduling Operations Setting Description T.120 Mode For MGC-hosted conferences only, selects the protocols and specifications for multipoint data communication. In the T.120 menu, select the speed for the T.120 connection. See your IT department to determine the best combinations for your conferences. To disable the T.120 mode, select None. If you select T.120, these options may be available, according to the participant s endpoint and software: Application Sharing. Allows two or more participants to work on the same document or application, even when only one participant has the application. In application sharing, one participant launches the application, and it runs simultaneously on all other computers. File Transfer. Enables participants to send files to each other. Chat or Whiteboard. Allows participants to communicate with each other by writing. In all of these modes, participants can view and hear each other. 3 Continuing scheduling or editing the meeting, as described in Scheduling Video Meetings on page 7. Select a Bridge for a Conference By default when you add a conference, the Polycom CMA system will automatically select a bridge for the conference. However, if you have advanced scheduler permissions, you can select a specific bridge for your conferences. To select a single bridge for a conference 1 When you re adding or editing a conference, after you ve made all of your other conference configuration choices, click Bridge Selection and select Single Bridge. A bridge selection drop down list appears based on the template selection and conference settings. 2 From the MCU list, select a specific MCU to host the conference. 3 Continue adding or editing the conference, as described in Conference Management Operations on page 17. Polycom, Inc. 17
22 Polycom CMA System Polycom Scheduling Guide for Microsoft Outlook Create a Cascaded Conference Across Multiple Bridges To create a cascaded conference across multiple bridges 1 When you re adding or editing a conference, after you ve made all of your other conference configuration choices, click Bridge Selection and select Multi Bridge. The Schedule button changes to a Manual Cascade button and the Recurrence button is grayed out. 2 Click Manual Cascade. The People To Bridges dialog box appears displaying the selected conference participants and their bridge assignments. Bridge assignments default to Auto. These system assignments are based on bridge capacity and/or least cost routing principles. In the Selected Bridge Availability section, the system shows a count of the available ports on the available bridges for the specified time period. If the port count is within 5% of the maximum ports available, it is displayed in red. 3 To change a bridge assignment for a selected participant, click Auto and select a bridge from the pull-down menu. A Polycom CMA system can only show port counts for conferences scheduled via the system. Ad hoc conferences are not included in the port count. 4 When you ve completed all bridge assignments, click Next. The Bridge To Bridge Links dialog box displays a graphical view of the selected bridges. If an MCU does not show up in the Bridge To Bridge Links dialog box, then the MCU software does not support cascading. 5 To add a hub bridge (a bridge used to connect one bridge to another), from the Available Bridges window, select a bridge and click Add Bridge. 6 Specify bridge-to-bridge connections by selecting the bridges of interest and clicking Add Link. The link is graphically represented by an arrow. The bridge at the base of the arrow dials to the bridge at the point of the arrow. 18 Polycom, Inc.
23 Advanced Scheduling Operations A Polycom RMX system cannot dial a Polycom MGC, so do not link from an RMX to an MGC. 7 In the Add Link dialog box, select the Link Type. You can add links from a Polycom MGC MCU to a Polycom RMX MCU There is no support for ISDN cascaded links on RMX MCUs. The lag time required to update cascaded links may cause more than one participant to hear the prompt about being the first person to join the conference. 8 When finished, click Schedule. The system verifies that it has a bridge with the capabilities and resources required for your conference. If it does, the Conference Notification page appears with a message indicating Conference Successfully Scheduled. 9 To exit without sending an to your participants, click Skip To send an notification to your participants, in the Conference Notification page: a b Copy additional people on the notification and/or add notes about the conference. Click Send. Note that the To, CC, and BCC fields are ASCII only. The system sends the conference notification . The Conference List - Schedule View appears. Your conference appears in the Conference List. Recurring cascaded conferences are not allowed. You cannot change the conference layout of a cascaded conference. Polycom, Inc. 19
24 Polycom CMA System Polycom Scheduling Guide for Microsoft Outlook 20 Polycom, Inc.
25 Index A advanced conference settings editing 13 audio-only conference 8 B bandwidth. See bit rate bit rate setting for guest participants 9 setting for internal participants 15 bridge (MCU) forcing use of 15 C chairperson 10 enabling 14 password for 14 changing advanced conference settings 13 changing a meeting 11 conference settings editing 13 conference settings. See settings conferences assigning password for 14 sending notification for 19 setting to audio only 8 connection speed setting for guest participants 9 setting for internal participants 15 continuous presence mode 15 D data plus video stream 16 date and time of meeting 8 dial options setting 15 setting for guest participants 9 dial type setting for guest participants 9 dial-in option 15 dial-out option 15 E editing advanced conference settings 13 notifications 19 enabling a chairperson 14 F forcing MCU usage 15 G guest participants setting bit rate for 9 setting dial options for 9 setting dial type for 9 L lecturer 10 logon settings 4 M MCU forcing use of 15 meeting information date and time 8 subject 8 meetings changing information about 11 scheduling 7 10 setting to recurring 8 mode, T modes, video continuous presence mode 15 setting 15 switching mode 15 modifying advanced conference settings 13 modifying a meeting 11 Polycom, Inc. 21
26 <Product Name> Polycom Scheduling Guide for Microsoft Outlook P passwords for chairperson 14 for conference 14 People + Content 16 R recurring meetings 8 S scheduling a meeting 7 10 Scheduling Plugin determining version of 5 Scheduling plugin logon settings for 4 settings advanced conference settings 13 chairperson password 14 conference password 14 connection speed 15 dial options 15 enable chairperson 14 forced MCU usage 15 logon 4 People + Content 16 T.120 mode 17 video mode 15 subject of a meeting 8 switching mode 15 T T.120 mode 17 time and date of meeting 8 V version of Scheduling Pluginsoftware version 5 video chairperson 10 video meetings. See meetings video modes continuous presence mode 15 setting 15 switching mode 15 video plus data stream Polycom, Inc.
Polycom Scheduling Guide for Microsoft Outlook 6.0.0 September 2011 3725-18004-001I Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with Polycom s products
Polycom Scheduling Guide for Microsoft Outlook 4.1.0 April 2009 3725-18004-001F Trademark Information Polycom, the Triangles logo, ReadiManager, SoundPoint, SoundStation, ViaVideo, VoiceStation, VSX and
Polycom CMA System Upgrade Guide 5.0 May 2010 3725-77606-001C Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with Polycom s products are trademarks and/or
SCOPIA iview Communications Manager User Guide Version 7.5 2000-2010 RADVISION Ltd. All intellectual property rights in this publication are owned by RADVISION Ltd and are protected by United States copyright
[Type the document title] 7.1.0 December 2012 3725-72103-001B Polycom RealPresence Resource Manager System Web Scheduler s Guide Polycom Document Title 1 Trademark Information POLYCOM and the names and
Getting Started Guide for the VSX Series December 2004 Edition 3725-21286-006/A GETTING STARTED GUIDE FOR THE VSX SERIES Trademark Information Polycom and the Polycom logo design are registered trademarks
product pic here Getting Started Guide for the VSX Series Version 9.0.6 March 2010 Edition 3725-21286-011/A Trademark Information Polycom, the Polycom logo design, SoundStation VTX 1000, and ViewStation
Administrator s Guide for the Polycom Video Control Application (VCA) Version 1.1 November 2007 Edition 3725-26448-004/A Trademark Information Polycom and the Polycom logo design are registered trademarks
MITEL Audio and Web Conferencing User Guide Notice This User Guide is released by Mitel Networks Corporation as a guide for end users. It provides information necessary to use Audio and Web Conferencing.
MITEL Inter-Tel Audio and Web Conferencing User Guide NOTICE This Inter-Tel Audio and Web Conferencing User Guide is released by Inter-Tel, Inc. as a guide for end-users. It provides information necessary
3.1 January 2014 3725-69930-002A Polycom RealPresence Desktop for Windows Trademark Information POLYCOM and the names and marks associated with Polycom's products are trademarks and/or service marks of
May 2006 Edition 3725-21286-008/A Getting Started Guide for the VSX Series Version 8.5 GETTING STARTED GUIDE FOR THE VSX SERIES Trademark Information Polycom, the Polycom logo design, and ViewStation are
User Guide for Avaya Scopia Add-in for Microsoft Outlook for Aura Collaboration Suite Version 8.3 For Solution 8.3 March 2014 2000-2014 Avaya Inc. All intellectual property rights in this publication are
Polycom Unified Communications Deployment Guide for Cisco Environments Wave 5 March 2012 3725-00010-001G Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with
product pic here User s Guide for Polycom HDX Room Systems Version 2.5 December 2008 Edition 3725-23978-005/A Version 2.5 Trademark Information Polycom, the Polycom logo design, SoundStation, ViewStation,
ShoreTel 13 Part Number 850-1234-01 Document and Software Copyrights Copyright 1998-2012 by ShoreTel Inc., Sunnyvale, California, USA. All rights reserved. Printed in the United States of America. Contents
You can read the recommendations in the user guide, the technical guide or the installation guide for CISCO TELEPRESENCE MANAGEMENT SUITE EXTENSION 2.2. You'll find the answers to all your questions on
AT&T Conferencing Add-in for Microsoft Outlook v10.5 July 2014 2014 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T
Installing Microsoft Exchange Integration for LifeSize Control September 2005 Part Number 132-00002-001, Version 1.1 Copyright Notice Copyright 2005 LifeSize Communications. All rights reserved. LifeSize
Using Conference Manager for Microsoft Outlook May 2012 Contents Chapter 1: Using Conference Manager for Microsoft Outlook... 5 Introducing Conference Manager for Microsoft Outlook... 5 Installing Conference
Frequently Asked Questions Contents Installing Lync 2010 Setting Up Devices Managing Contacts Using Lync 2010 as a Phone Using Lync 2010 with Office Outlook Scheduling Meetings Inviting People to Meetings
Polycom RealPresence Resource Manager System Administrator s Guide 7.0.0 August 2012 3725-72110-001A Trademark Information Polycom and the names and marks associated with Polycom's products are trademarks
MGC Manager User s Guide VoicePlus Edition Version 9.0.4 August 2010 DOC2235A Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with Polycom s products are trademarks
Scopia Desktop Client User Guide Version 8.2.1 For Solution 8.2 8.2.1 2000-2013 RADVISION Ltd. All intellectual property rights in this publication are owned by RADVISION Ltd and are protected by United
Getting Started with Microsoft Office Live Meeting Published October 2007 Last Update: August 2009 Information in this document, including URL and other Internet Web site references, is subject to change
LEVEL 3 SM XPRESSMEET SOLUTIONS USER GUIDE VERSION 2015 TABLE OF CONTENTS Level 3 XpressMeet Calendar...3 Level 3 SM XpressMeet Outlook Add-In...3 Overview...3 Features...3 Download and Installation Instructions...
Bell Aliant PC Phone Installation/Removal Guide Version 10.4 bellaliant.net/unifiedcommunications Before you begin You will need to login into your Personal Agent, and change your password, before accessing
LifeSize Control Installation Guide April 2005 Part Number 132-00001-001, Version 1.0 Copyright Notice Copyright 2005 LifeSize Communications. All rights reserved. LifeSize Communications has made every
Polycom CMA System Operations Guide Version 4.0 October 2008 3725-77601-001A Trademark Information Polycom, the Triangles logo, ReadiManager, SoundPoint, SoundStation, ViaVideo, VoiceStation, and Vortex
Getting Started with Microsoft Office Live Meeting Published October 2007 Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless
Deployment Guide for the Polycom SoundStructure VoIP Interface for Cisco Unified Communications Manager (SIP) UC Software 4.0.1 December 2011 1725-33223-001 Rev. A Trademark Information POLYCOM, the Polycom
Installing Software and Options for Polycom HDX Systems and Accessories By upgrading your Polycom software or by purchasing additional system options, your organization continues to benefit from the latest
WebEx Integration to Outlook User Guide 072310 Copyright 1997 2010 Cisco and/or its affiliates. All rights reserved. WEBEX, CISCO, Cisco WebEx, the CISCO logo, and the Cisco WebEx logo are trademarks or
Getting Started Guide for WebEx Hosts and Presenters Scheduling a Meeting in Outlook First, install the WebEx Productivity Tools. Then you can schedule your online Meeting using Outlook just like you schedule
Scheduling WebEx Meetings with Microsoft Outlook About WebEx Integration to Outlook, page 1 Scheduling a WebEx Meeting from Microsoft Outlook, page 2 Starting a Scheduled Meeting from Microsoft Outlook,
User s Guide for Polycom HDX Room Systems Version 2.6 April 2010 3725-23978-007/A Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with Polycom s products are
Getting Started Guide January 19, 2014 User Guide Chapters 1. Scheduling Meetings Configuring Meeting Details Advanced Options Invitation Email, received by the Participants Invitation Email, sent to the
User Guide Live Meeting Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations,
Wave IP 2.0 SP1 Wave ViewPoint User Guide 2011 by Vertical Communications, Inc. All rights reserved. Vertical Communications and the Vertical Communications logo and combinations thereof and Vertical ViewPoint
MGC WebCommander Web Server Manager User s Guide Version 9.0 Copyright 2007 Polycom, Inc. All Rights Reserved Catalog No. DOC2137C Version 9.0 Proprietary and Confidential The information contained herein
Polycom CMA System Operations Guide 4.1.0 April 2009 3725-77601-001B Trademark Information Polycom, the Polycom logo design, ReadiManager SE200, SoundStation, ViewStation, Vortex, and VSX are registered
Polycom Unified Communications Deployment Guide for Microsoft Environments Wave 4 February 2011 3725-00000-003C Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated
Blackboard Collaborate Classroom in Desire2Learn Presenters Copyright 2014 Information Technology Services Kennesaw State University This document may be downloaded, printed, or copied, for educational
User s Guide for Polycom CX7000 Systems 1.1 August 2012 3725-63878-001/C Trademark Information Polycom, the Polycom Triangles logo, and the names and marks associated with Polycom s products are trademarks
MY TEAMWORK 5.0 QUICK START GUIDE What is My Teamwork? My Teamwork is a converged communications solution that combines presence-aware instant messaging with the ability to make phone calls, conference
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
VISUAL QUICK START GUIDE ADOBE CONNECT PRO 8 Getting started with Adobe Connect meetings Create and Access Your Meetings 1. Navigate to : https://brookdalecc.adobeconnect.com in your web browser. 2. Log
ScheduleOne - Help Guide Only from MeetingOne 501 South Cherry Street Suite 500 Denver, Colorado 80246 Tel: 303.623.2530 Fax: 303.623.1294 Table of Contents ScheduleOne Installation Instructions 2 Basic
Getting Started Guide User Guide Chapters 1. Scheduling Meetings Configuring Meeting Details Advanced Options Invitation Email, received by the Participants Invitation Email, sent to the Moderator (scheduler)
Online Help 3.1 January 2014 3725-69929-002/A Polycom RealPresence Mobile for Apple ipad Trademark Information POLYCOM and the names and marks associated with Polycom's products are trademarks and/or service
Smart Control Center User Guide 350 East Plumeria Drive San Jose, CA 95134 USA November 2010 202-10685-01 v1.0 2010 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted,
CA VPN Client User Guide for Windows 18.104.22.168 This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as the Documentation ) is for your
Web Conference Manager Reference Guide Table of Contents 1. Introduction to GTB Web Conferencing... 1 2. System Requirements... 2 3. Web Conferencing Host... 3 Accessing the server... 3 Testing your system...
WebEx Meeting Center User s Guide Version 8 Copyright WebEx Communications, Inc. reserves the right to make changes in the information contained in this publication without prior notice. The reader should
AT&T Conferencing Add-in for Microsoft Outlook 2016 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property
User s Guide for Polycom HDX Desktop Systems Version 3.0.5 July 2012 3725-26470-007/A Trademark Information Polycom and the names and marks associated with Polycom's products are trademarks and/or service
ADOBE ACROBAT CONNECT ADD-IN FOR MICROSOFT OUTLOOK USER GUIDE 2007 Adobe Systems Incorporated. All rights reserved. Adobe Acrobat Connect Add-in for Microsoft Outlook User Guide If this guide is distributed
[Type the document title] Polycom RealPresence Resource Manager System Getting Started Guide 8.0 August 2013 3725-72102-001B Polycom Document Title 1 Trademark Information POLYCOM and the names and marks
BroadTouch Business Communicator for Desktop User Guide Release 10.0.2 Document Version 1 9737 Washingtonian Boulevard, Suite 350 Gaithersburg, MD 20878 Tel +1 301.977.9440 WWW.BROADSOFT.COM BroadTouch
Using Avaya Flare Experience for Windows Release 9.0 Issue 02.01 September 2013 Contents Chapter 1: About Flare Experience... 5 About Flare Experience... 5 Main window... 6 Button descriptions... 10 Chapter
Scheduling WebEx Meetings with Microsoft Outlook About WebEx Integration to Outlook, page 1 Scheduling a WebEx Meeting from Microsoft Outlook, page 2 Starting a Scheduled Meeting from Microsoft Outlook,
LifeSize UVC Manager TM Deployment Guide May 2014 LifeSize UVC Manager Deployment Guide 2 LifeSize UVC Manager Network administrators who use UVC Manager to manage video and voice communications systems
Oracle Collaboration Suite Using Oracle Web Conferencing Release 2 (22.214.171.124.0) Part No. B12133-02 March 2004 Use this document to learn the basics of Oracle Web Conferencing. It is recommended that conference
Online Help 3.1 January 2014 3725-69928-002/A Polycom RealPresence Mobile for Apple iphone Trademark Information POLYCOM and the names and marks associated with Polycom's products are trademarks and/or
ShoreTel Enterprise Contact Center Using Agent Toolbar USER GUIDES RELEASE 7 Document and Software Copyrights Copyright 1998 2011 ShoreTel, Inc. All rights reserved. Printed in the United States of America.
For Windows 1 About Microsoft Lync... 4 Lync Window... 5 Audio... 6 Set up your audio device... 6 Make a call... 6 Answer a call... 7 Use audio call controls... 7 Check voicemail... 7 Invite more people
Conference Bridge For assistance: Call 1-800-770-2121 E-mail email@example.com TABLE OF CONTENTS Administer Participants... 3 Manage Scheduled Conference... 3 Manage Personal Accounts... 3 Microsoft
ShoreTel Contact Center Using ShoreWare Agent Toolbar USER GUIDES RELEASE 6 Document and Software Copyrights Copyright 1998 2010 ShoreTel, Inc. All rights reserved. Printed in the United States of America.
ECA IIS Instructions January 2005 THIS PAGE INTENTIONALLY BLANK ECA IIS Instructions ii July 22, 2005 Table of Contents 1. Install Certificate in IIS 5.0... 1 2. Obtain and Install the ECA Root Certificate
XStream Remote Control: Configuring DCOM Connectivity APPLICATION BRIEF March 2009 Summary The application running the graphical user interface of LeCroy Windows-based oscilloscopes is a COM Automation
NTI Backup Now EZ v2 User s Guide GMAA00423010 11/12 2 Copyright statement This guide is copyrighted by Toshiba Corporation with all rights reserved. Under the copyright laws, this guide cannot be reproduced
WebEx Meeting Center User's Guide Table of Contents Accessing WebEx... 3 Choosing the scheduler that works for you... 6 About the Quick Scheduler Page... 6 About the Advanced Scheduler... 8 Editing a scheduled
TANDBERG MANAGEMENT SUITE 10.0 Installation Manual Getting Started D12786 Rev.16 This document is not to be reproduced in whole or in part without permission in writing from: Contents INTRODUCTION 3 REQUIREMENTS
Getting Started Guide New Meeting Experience April 13, 2013 How to Enable the New Experience To test drive the new Meeting Experience, click the Enable button in your Account section. You can disable from
ArchMail (www.archbalt.org/archmail) is a centrally hosted email system for the employees of the Archdiocese. To simplify employee access multiple methods for accessing email have been established. This
Microsoft Office Communicator 2007 Getting Started Guide Published: July 2007 Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless