OTICON RIA pro OTICON RIA

Transcription

1 product information Oticon Ria is built on the new Inium platform and is our best performing hearing solution in the essential category. The audiological features in Ria provide users essential listening performance in several situations and factor in individual listening preferences and patient needs. The Ria family of instruments range from compact in-the-ear styles, including the Invisible-In-the-Canal (IIC) design for users looking for ultimate discretion, and ITE for severe hearing losses, to a broad palette of BTE and RITE styles. RITE instruments use Oticon s minifit receivers and the BTE instruments use the new Corda minifit thin tubes. Both of these use the minifit soft domes and custom ear pieces. FITTING RANGE HL k Ria solutions are appropriate for users with mild to severe-to-profound hearing losses. YouMatic Essential YouMatic is a personal automatic system programmed to the patient s individual needs and sound preferences. YouMatic Essential makes it easy to adjust the instrument s reaction and response performance to better match patients preferences for comfort, support and clarity in sound. Free Focus Essential Free Focus Essential switches seamlessly between two modes Optimized and Split directionality with the possibility to manually switch to Full directionality in very difficult listening situations. Optimized is a new mode of directionality specifically developed to improve speech understanding by mimicking the natural front focus of the pinna to provide the desired access to the speech signal. Inium feedback shield Inium feedback shield is an effective feedback protection system implemented on the new Oticon Inium platform. Inium feedback shield is a hybrid system combining two anti-feedback principles designed to both prevent and suppress feedback without superimposing artifacts onto the signal or sacrificing audibility. Inium feedback shield deploys the best combination of real time phase inversion and frequency shifting to deliver great sound quality at all times. Family Features YouMatic Essential Binaural Synchronization Binaural PB Coordination Fitting Bandwidth 8 khz Inium feedback shield Free Focus Essential Activity Analyzer T-coil AutoPhone Program Modulation-based Noise Management Single Band ectionality NAL-NL1, NAL-NL2 and DSL v5.a m[i/o] Flexible minifit receiver system ConnectLine enabled DAI input and FM option In-situ audiometry (Genie) INIUM WIRELESS

2 PRODUCT OVERVIEW r ite styles c u stom styles - HL k - HL k - HL k - HL k - HL k - HL k Custom mold Bass & Power dome OSPL (peak) (peak) bte styles - HL k - HL k Open dome - Custom mold HL k Corda minifit Ear simulator cc coupler Ear simulator cc coupler IIC CIC ITC ITE - Half Shell ITE - Full Shell Battery size minirite RITE minibte BTE Fitting levels Battery life (h)* Wireless ectional Volume control Telecoil AutoPhone Connectline compatible FlexConnect Mini FlexConnect Mini FlexConnect Programming shoe Cable #3 directly Programming shoe Program control FM compatible Programming interface, cable #3 FlexConnect Mini Default Option c u stom styles Wax protection Receiver in all instruments ProWax Microphone in battery instruments. T-Cap Microphone in 312 and 13 battery instruments. O-Cap Instruments with 312 battery may be produced with horizontal b attery drawer depending on ear geometry. Four receiver sizes are available for custom products corresponding to fitting levels. The receiver is selected at Oticon based on the audiogram. Power options are indicated on the order form. * Real usage battery life is shown as an estimated interval based on measurements with variable amplification settings and variable input levels. gene r al info B T E / R I T E styles Tamper resistant battery drawer Available in 7 colors for all BTE and RITE styles. DAI adaptor AP (available for BTE13 and RITE styles). Dedicated FM receiver Amigo R12 (available for BTE13 and RITE styles). FM adaptor FM 9 (available for BTE13 styles) Compatible with Amigo R1, R2 and other universal r eceivers (not recommended for instruments using 312 batteries). FITTING LEVELS Custom RITE BTE 2 3

3 PRODUCT OVERVIEW Oticon Ria instruments are programmed using the Genie 14.1 fitting software or higher compatible with NOAH 3 or higher. They can be programmed using either programming cables #3 or wirelessly using nearcom (TM#1). general fitting Wireless fitting - nearcom nearcom provides a wireless link between NOAHlink and one or two wireless-enabled hearing instruments. In addition, nearcom provides a pass-through connection to accommodate programming cables and replaces the existing NOAHlink neck loop (not availble for non-wireless products; consult order form for options). MODEL FEATURES Oticon Ria Pro Oticon Ria Fitting formulas NAL, DSL NAL, DSL YouMatic Essential Essential Binaural Synchronization (automatics) Yes No Binaural Coordination (PB operations) Yes Yes Fitting Bandwidth* 8 khz 8 khz Free Focus Essential Essential Inium feedback shield Yes Yes Fitting Bands 6 4 * Bandwidth accessible for gain adjustments during fitting RITE STYLES Receiver unit Receiver wire Receiver connector to instrument Must use minifit receivers. Select between three receiver types with different output performance, labeled according to fitting capabilities:, 85 and. and 85 available in lengths from size 5. available in lengths from size 1 5. Separate wires connect Power Receiver molds () to RITE instruments, available in lengths from size 1 5. Type C1 (marked on packaging). Ear Pieces Wax protection Must use minifit ear pieces. Open domes in size 6, 8 and mm. Bass domes, single vent in size 6, 8, and 12 mm. Bass domes, double vent in size 6, 8, and 12 mm. Power domes in size 6, 8, and 12 mm. Custom ear pieces are available as LiteTip and Micro Mold (requires taking an impression). ProWax minifit in all minifit receivers. ProWax in Power Receiver Mold, LiteTip and Micro Mold. rite & bte styles Chroma Beige 94 Terracotta COLOR SELECTION 93 Chestnut Brown 44 Silver 91 Silver Grey 92 Steel Grey 63 Diamond Black custom styles BTE STYLES 1 Pink 2 Tan 3 Medium Brown 4 Dark Brown 5 Black (IIC faceplate only) Sound hook Interchangeable standard and child hook Damper Damping plug available for BTE13 85 Thin tubes Corda minifit (.9 mm tubes) for minibte 85 and BTE Corda minifit Power (1.3 mm tubes) for BTE13. Thin tubes are available in lengths from size -1 to 4. Style specific adapters must be used when connecting thin tubes. Ear pieces Wax Protection Must use minifit ear pieces for Corda minifit. Open domes in size 6, 8 and mm. Bass domes, single vent in size 6, 8, and 12 mm. Bass domes, double vent in size 6, 8, and 12 mm. Power domes in size 6, 8, and 12 mm. Custom ear pieces are available as a Corda Mold (requires taking an impression). ProWax for Corda Mold. power Receiver mold 6 Clear 4 5

4 minirite minirite 85 IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL directional mode is used unless Nera_mRiteS_FOG_ str_lo 16:4:4 Nera_mRiteS_MPO_ str_lo 16:5:49 Nera_mRiteS_FOG_2cc str_lo 16:3:35 Nera_mRiteS_MPO_2cc str_lo 16:5:13 directional mode is used unless Nera_mRiteM_FOG_ str_lo 15:53:39 Nera_mRiteM_MPO_ str_lo 15:54:47 Nera_mRiteM_FOG_2cc str_lo 15:53:15 Nera_mRiteM_MPO_2cc str_lo 15:54:26 Nera_mRiteS_RTG_ str_lo 16:7:29 Nera_mRiteS_RTG_2cc str_lo 16:7:5 Nera_mRiteM_RTG_ str_lo 15:57:11 Nera_mRiteM_RTG_2cc str_lo 15:56:39 OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz - Hz ma 1.3 ma OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -7 Hz 2.4 % <2 % ma 1.2 ma IRIL (IEC ) 1 // MHz: 43/26/<18 IRIL (IEC ) 1 // MHz: 45//25 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 6 7

5 minirite rite IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL 1 1 directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. Nera_mRiteP_RTG_ str_lo 16:1:57 Nera_mRiteP_FOG_ str_lo 15:59: Nera_mRiteP_MPO_ str_lo 16::15 Nera_mRiteP_RTG_2cc str_lo 16:1:7 Nera_mRiteP_FOG_2cc str_lo 15:58:28 Nera_mRiteP_MPO_2cc str_lo 15:59:53 directional mode is used unless Acoustic input: Nera_mRiteS_MPO_ str_lo 16:5:49 Nera_mRiteS_FOG_ str_lo 16:4:4 Nera_RiteS_MT_ str_lo 16:13:52 Acoustic input: Nera_mRiteS_MPO_2cc str_lo 16:5:13 Nera_mRiteS_FOG_2cc str_lo 16:3:35 Nera_RiteS_MT_2cc str_lo 16:13:19 OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -7 Hz 2.5 % <2 % ma 1.3 ma OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz - Hz / ma 1.3 ma IRIL (IEC ) 1 // MHz: 46/28/23 IRIL (IEC ) 1 // MHz: 27/46/51 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 8 9

6 rite 85 rite IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL 1 1 directional mode is used unless Acoustic input: Nera_mRiteM_MPO_ str_lo 15:54:47 Nera_mRiteM_FOG_ str_lo 15:53:39 Nera_RiteM_MT_ str_lo 16::25 Acoustic input: Nera_mRiteM_MPO_2cc str_lo 15:54:26 Nera_mRiteM_FOG_2cc str_lo 15:53:15 Nera_RiteM_MT_2cc str_lo 16:9:52 directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. Acoustic input: Nera_mRiteP_MPO_ str_lo 16::15 Nera_mRiteP_FOG_ str_lo 15:59: Nera_RiteP_MT_ str_lo 16:12:11 Acoustic input: Nera_mRiteP_MPO_2cc str_lo 15:59:53 Nera_mRiteP_FOG_2cc str_lo 15:58:28 Nera_RiteP_MT_2cc str_lo 16:11:39 OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -7 Hz / % <2 % ma 1.2 ma OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -7 Hz /1 2.5 % <2 % ma 1.3 ma IRIL (IEC ) 1 // MHz: 19/41/36 IRIL (IEC ) 1 // MHz: <17/49/39 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 11

7 minibte 85 BTE13 85 IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL directional mode is used unless 1 Thin tube (size 1/.9) Nera_mBTE_711_MPO_update_ str_lo 15:44:48 Nera_mBTE_711_gain_update_ str_lo 15:47: 1 Thin tube (size 1/.9) Nera_mBTE_2cc_MPO_update_ str_lo 15:45:27 Nera_mBTE_2cc_gain_update_ str_lo 15:47:45 directional mode is used unless Thin tube (size 1/.9) Nera_BTE13_MPO_ str_lo 15:26:14 Nera_BTE13_gain_ str_lo 15:24:21 Thin tube (size 1/.9) Nera_BTE13_MPO_2cc str_lo 15:22:49 Nera_BTE13_gain_2cc str_lo 15:23:53 Nera_711_frq_response str_lo 15:42:51 Nera_2cc_frq_response str_lo 15:42:24 Acoustic input: Nera_BTE13_MT_ str_lo 15:29:49 Acoustic input: Nera_BTE13_MT_2cc str_lo 15:28:48 OSPL Telecoil output () (Input ) ma/m field Hz Hz 131 (122*) 121 (117*) 126 (114*) (5*) 119 (116*) 118 (9*) 62 (61*) 53 (57*) (39*) 44 (*) (52*) 46 (*) Hz -6 Hz ma 1.2 ma OSPL Telecoil output () (Input ) ma/m field Hz Hz 126 (126*) 117 (123*) 121 (8*) 114 (*) 116 (116*) 113 (6*) 61 (63*) 51 (59*) (36*) 43 (28*) 49 (52*) 44 (41*) Hz - Hz / ma 1.1 ma 1.1 ma 1.1 ma 12 * IRIL (IEC ) 1 // MHz: <18/24/36 * For instruments fitted with Corda minifit ** Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment * Size 13 (IEC PR48) IRIL (IEC ) 2 // MHz: 24/48/45 * For instruments fitted with Corda minifit ** Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 13

8 BTE13 Custom 75 (iic only) IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 Thin tube (size 1/1.3) Acoustic input: Nera_BTE13P_MPO_ str_lo 15:32:34 Nera_BTEP_gain_updateCorda_ str_lo 15:36:39 Nera_BTE13P_MT_ str_lo 15:34:9 1 Thin tube (size 1/1.3) Acoustic input: Nera_BTE13P_MPO_2cc str_lo 15:31:55 Nera_BTEP_gain_updateCorda_2cc str_lo 15:35:54 Nera_BTE13P_MT_2cc str_lo 15:34:48 All measurements are made on instruments with ProWax receiver and T-Cap microphone protection. Acoustic input: P84_Intiga i_8_711_ospl str_lo 13:25:13 Nera Ria_Pro_IIC_FOG_711_S kbn_tjn 16:29:51 Nera Ria_Pro_IIC_Freqdb_711_S kbn_tjn 16:31:18 Acoustic input: P84_Intiga i_8_2cc_ospl str_lo 13:24:55 P84_Intiga i_8_2cc_fog str_lo 11:1:35 P84_Intiga i_8_2cc_fresp str_lo 11:4:22 OSPL Telecoil output () (Input ) ma/m field Hz Hz 135 (132*) 126 (128*) 128 (116*) (8*) 122 (121*) (115*) 68 (66*) (62*) (44*) 52 (36*) 57 (56*) 53 (49*) Hz - Hz / ma 1.1 ma 1.1 ma 1.1 ma OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -7 Hz <2 % 2 % ma.7 ma.7 ma.7 ma 14 * Size 13 (IEC PR48) IRIL (IEC ) 2 // MHz: 24/48/45 * For instruments fitted with Corda minifit Power ** Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment (Size, IEC PR) IRIL (IEC ) 135 // MHz: 14/19/< * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: Custom instruments may be built with a reduced maximum gain to optimize size and performance for the individual. 15

9 Custom 75 Custom 85 IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL All measurements are made on instruments with ProWax and T-Cap or O-Cap protection. directional mode is used unless otherwise stated. Nera ITC75_FOG_ str_lo 15:14:22 Nera ITC75_MPO_ str_lo 15:15:41 Nera ITC75_FOG_2cc str_lo 15:13:11 Nera ITC75_MPO_2cc str_lo 15:15:18 All measurements are made on instruments with ProWax and T-Cap or O-Cap protection. directional mode is used unless otherwise stated. Nera ITC85_FOG_ str_lo 15::34 Nera ITC85_MPO_ str_lo 15:22:36 Nera ITC85_FOG_2cc str_lo 15:19:41 Nera ITC85_MPO_2cc str_lo 15:22: Acoustic input: Nera ITC75_MT_ str_lo 15:17:38 Acoustic input: Nera ITC75_MT_2cc str_lo 15:16:45 Acoustic input: Nera ITC85_MT_ str_lo 15:23:59 Acoustic input: Nera ITC85_MT_2cc str_lo 15:23:28 OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -7 Hz /82 2. % <2 % 2. % <2 % 3. % 2. % OSPL Telecoil output () (Input ) ma/m field SPLITS L / R Hz Hz Hz - Hz / 2. % <2 % 2. % <2 % 3. % 2. % Size: (IEC PR) / 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC ) 135/1/2 // MHz: 28/44/37 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: Custom instruments may be built with a reduced maximum gain to optimize size and performance for the individual. Size: (IEC PR) / 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC ) 125/1/2 // MHz: 21/39/<14 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: Custom instruments may be built with a reduced maximum gain to optimize size and performance for the individual

10 Custom Custom IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). IEC 118- (1983) and 711 (1981) and DIN 455. ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL OSPL OSPL OSPL All measurements are made on instruments with ProWax and O-Cap protection. directional mode is used unless otherwise stated. 1 Acoustic input: Nera ITC_MPO_ str_lo 15:27:34 Nera ITC_FOG_ str_lo 15:26:14 Nera ITC_MT_ str_lo 15:28:49 1 Acoustic input: Nera ITC_MPO_2cc str_lo 15:27: Nera ITC_FOG_2cc str_lo 15:25: Nera ITC_MT_2cc str_lo 15:28:19 All measurements are made on instruments with ProWax and O-Cap protection. directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 Acoustic input: Nera_Ria_ITE_MPO kbn_tjn 13:33:27 Nera_Ria_ITE FOG_ kbn_tjn 14:8: Nera_Ria_ITE_MT_ kbn_tjn 13:36:32 1 Acoustic input: Nera_Ria_ITE _MPO_2cc kbn_tjn 13:34:15 Nera_Ria_ITE FOG_2cc kbn_tjn 13:21:47 Nera_Ria_ITE _MT 2cc kbn_tjn 13:37:16 OSPL Telecoil output () (Input ) ma/m field Hz Hz Hz -69 Hz /93 3. % 2. % OSPL Telecoil output () (Input ) ma/m field SPLITS L / R Hz Hz Hz Hz /5 2. % <2 % ma.9 ma.9 ma.9 ma Size: 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC ) 1/2 // MHz: 26/55/41 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: Custom instruments may be built with a reduced maximum gain to optimize size and performance for the individual. Size: 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC ) 155/2 // MHz: 15/45/28 * Based on the standardized battery consumption measurement (IIC 118-.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: Custom instruments may be built with a reduced maximum gain to optimize size and performance for the individual

11 People First People First is our promise to empower people to communicate freely, interact naturally and participate actively 1385US / Printed on % recycled paper