ELENCO PROVE ACCREDITATE - CATEGORIA: 0
|
|
- Ashlyn Shelton
- 8 years ago
- Views:
Transcription
1 Scheda 1 di 9 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Anelli per alpinismo Information supplied by the manufacturer (Verifica conformità) EN 566:2006 clausola 7 Marking (Verifica conformità) EN 566:2006 clausola 6 Stability (Verifica conformità) EN 566:2006 clausola 4.1 Stitching (Verifica conformità) EN 566:2006 clausola 4.2 Tensile strength (0-31 kn) EN 566:2006 clausola 4.3 Biocombustibili Determinazione del contenuto di ceneri (0-40 grammi) Determinazione del potere calorifico (>11 MJ/kg) Determinazione dell umidità - Metodo di essiccazione in stufa - Umidità totale (0-10 kg) Determinazione della distribuzione granulometrica (0-4 kg) Determinazione della massa volumica apparente (0-100 kg) EN14775:2009 EN14918:2009 EN :2009 EN :2010 EN15103:2009 Calzature da lavoro Abrasion resistance - Insock (Verifica conformità) EN ISO 20347:2012 clausola Abrasion resistance (0-250 mm3) EN ISO 20347:2012 clausola Abrasion resistance (Verifica conformità) EN ISO 20347:2012 clausola Antistatic footwear (Verifica conformità) EN ISO 20347:2012 clausola Cleat height (>2,5 mm) EN ISO 20347:2012 clausola Cleated area (Verifica conformità) EN ISO 20347:2012 clausola Cold insulation of sole complex (0-10 C) EN ISO 20347:2012 clausola Conductive footwear (Verifica conformità) EN ISO 20347:2012 clausola Construction (Verifica conformità) EN ISO 20347:2012 clausola Construction (Verifica conformità) EN ISO 20347:2012 clausola Corrosion resistance of penetration- resistant metallic inserts (0-2,5 mm) EN ISO 20347:2012 clausola solo categoria I Determination of penetration force - Metallic anti-penetration insert (>1100 N) EN ISO 20347:2012 clausola Determination of penetration force - Non metallic anti-penetration insert used as an insole (Verifica conformità) EN ISO 20347:2012 clausola Energy absorption of seat region (>20 J) EN ISO 20347:2012 clausola Flex resistance of penetration-resistant inserts (Verifica conformità) EN ISO 20347:2012 clausola General (Verifica conformità) EN ISO 20347:2012 clausola 8.1 Heigth of upper ( mm) EN ISO 20347:2012 clausola Hydrolysis (0-6 mm) EN ISO 20347:2012 clausola Insocks (Verifica conformità) EN ISO 20347:2012 clausola 8.3 Interlayer bond strength (>4 N/mm) EN ISO 20347:2012 clausola Marking (Verifica conformità) EN ISO 20347:2012 clausola 7 Penetration-resistance non-metallic inserts (Verifica conformità) EN ISO 20347:2012 clausola
2 Scheda 2 di 9 Resistance to fuel oil (±12 % 0-6 mm) EN ISO 20347:2012 clausola Seat region (Verifica conformità) EN ISO 20347:2012 clausola Tear strength (>15 N) EN ISO 20347:2012 clausola Tear strength (>18 N) EN ISO 20347:2012 clausola Tear strength (>5 kn/m) EN ISO 20347:2012 clausola Tear strength ( N) EN ISO 20347:2012 clausola Tensile properties (>15 N/mm2) EN ISO 20347:2012 clausola solo pelle Thickness (>4 mm) EN ISO 20347:2012 clausola Upper - Water penetration and absorpion (0-0,2 g EN ISO 20347:2012 clausola 6.3 Upper/outsole bond strength (0-4 N/mm) EN ISO 20347:2012 clausola Water absorption and desorbtion (>70 mg/cm2 EN ISO 20347:2012 clausola Water resistance (0-3 cm2) EN ISO 20347:2012 clausola Water vapor permeability and coefficient (>0,8 mg/(cm2h) >15 mg/cm2) Water vapor permeability and coefficient (>2,0 mg/(cm2h) >20 mg/cm2) EN ISO 20347:2012 clausola EN ISO 20347:2012 clausola Calzature di sicurezza Abrasion resistance - Insock (Verifica conformità) EN ISO 20345:2011 clausola Abrasion resistance (0-250 mm3) EN ISO 20345:2011 clausola Abrasion resistance (Verifica conformità) EN ISO 20345:2011 clausola Cleat heigth (>2,5 mm) EN ISO 20345:2011 clausola Cleated area (Verifica conformità) EN ISO 20345:2011 clausola Cold insulation of sole complex (0->10 C) EN ISO 20345:2011 clausola Compression resistance of safety footwear (>12,5 mm) EN ISO 20345:2011 clausola Construction (Verifica conformità) EN ISO 20345:2011 clausola Construction (Verifica conformità) EN ISO 20345:2011 clausola Corrosion resistance of penetration- resistant metallic inserts (0-2,5 mm) EN ISO 20345:2011 clausola per categoria I Determination of penetration force - Metallic anti-penetration insert (>1100 N) EN ISO 20345:2011 clausola Determination of penetration force - Non metallic anti-penetration insert (Verifica conformità) EN ISO 20345:2011 clausola Electrical properties (Verifica conformità) EN ISO 20345:2011 clausola 8.2 Energy absorption of seat region (>20 J) EN ISO 20345:2011 clausola Flex resistance of penetration-resistant inserts (Verifica conformità) EN ISO 20345:2011 clausola General (>5 mm) EN ISO 20345:2011 clausola General (Verifica conformità) EN ISO 20345:2011 clausola 8.1 Height of upper ( mm) EN ISO 20345:2011 clausola Hydrolysis (0-6 mm) EN ISO 20345:2011 clausola Impact resistance of safety footwear (>12,5 mm) EN ISO 20345:2011 clausola Insocks (Verifica conformità) EN ISO 20345:2011 clausola 8.3
3 Scheda 3 di 9 Interlayer bond strength (0-4 N/mm) EN ISO 20345:2011 clausola Internal length of toecaps (>34 mm) EN ISO 20345:2011 clausola Marking (Verifica conformità) EN ISO 20345:2011 clausola 7 Penetration-resistant non metallic inserts (Verifica conformità) EN ISO 20345:2011 clausola Resistance to fuel oil (±12 % 0-6 mm) EN ISO 20345:2011 clausola Seat region (Verifica conformità) EN ISO 20345:2011 clausola Tear strength (>15 N) EN ISO 20345:2011 clausola Tear strength (>18 N) EN ISO 20345:2011 clausola Tear strength (>5 kn/m) EN ISO 20345:2011 clausola Tear strength ( N) EN ISO 20345:2011 clausola Tensile properties (>15 N/mm) EN ISO 20345:2011 clausola solo pelle Thickness (>2,5 mm) EN ISO 20345:2011 clausola Upper - Water penetration and absorpion (0-0,2 g EN ISO 20345:2011 clausola 6.3 Upper/outsole bond strength (>4 N/mm) EN ISO 20345:2011 clausola Water absorption and desorbtion (>70 mg/cm2 EN ISO 20345:2011 clausola Water resistance (0-3 cm2) EN ISO 20345:2011 clausola Water vapor permeability and coefficient (>0,8 mg/(cm2h) >15 mg/cm2) Water vapor permeability and coefficient (>2,0 mg/(cm2h) >20 mg/cm2) EN ISO 20345:2011 clausola EN ISO 20345:2011 clausola Caschi da motociclismo Dynamic test of the retention system (0-35 mm) ECE/ONU clausola 7.6 Impact absorption tests (0-275 g HIC) ECE/ONU clausola 7.3 Retention (detaching) test (0-30 ) ECE/ONU clausola 7.7 Caschi industriali di sicurezza Addition information (Verifica conformità) EN 397+A clausola 7.2 Chin strap (>10 mm) EN 397+A clausola 4.8 Comfort band or sweatband (>200 mm) EN 397+A clausola Cradle (>15 mm) EN 397+A clausola Electrical properties (0-1,2 ma) EN 397+A clausola External vertical distance (0-500 mm) EN 397+A clausola 4.2 Flame resistance (Verifica conformità) EN 397+A clausola Head band/nape strap (0-5 mm) EN 397+A clausola Horizontal distance (Verifica conformità) EN 397+A clausola 4.5 Internal vertical clearance (0-500 mm) EN 397+A clausola 4.4 Internal vertical distance (0-500 mm) EN 397+A clausola 4.3 Label (Verifica conformità) EN 397+A clausola 5.1.5
4 Scheda 4 di 9 Lateral deformation (0-40 mm) EN 397+A clausola Markings of the helmet (Verifica conformità) EN 397+A clausola 7.1 Resistance to penetration (Verifica conformità) EN 397+A clausola Shock absorption (0-5 kn) EN 397+A clausola Very low temperature (-20 C or -30 C) (0-5 kn) EN 397+A clausola Wearing height (0-500 mm) EN 397+A clausola 4.6 Caschi per alpinisti Front energy absorbtion capacity (0-10 kn) EN12492:2012 clausola Information supplied by the manufacturer (Verifica conformità) EN12492:2012 clausola 7 Labelling (Verifica conformità) EN12492:2012 clausola 6.2 Marking (Verifica conformità) EN12492:2012 clausola 6.1 Penetration (Verifica conformità) EN12492:2012 clausola Projection (Verifica conformità) EN12492:2012 clausola Rear energy absorbtion capacity (0-10 kn) EN12492:2012 clausola Retention system effectivness (roll off) (Verifica conformità) EN12492:2012 clausola Side energy absorbtion capacity (0-10 kn) EN12492:2012 clausola Vertical energy absorbtion capacity (0-10 kn) EN12492:2012 clausola Caschi per ciclisti e per utilizzatori di tavole a rotelle (skateboards) e pattini a rotelle Chin strap (>15 mm) EN 1078:2012+A clausola Colour (Verifica conformità) EN 1078:2012+A clausola Construction (Verifica conformità) EN 1078:2012+A clausola 4.2 Durability (Verifica conformità) EN 1078:2012+A clausola 4.5 Ease of release (Verifica conformità) EN 1078:2012+A clausola Effectivness (Verifica conformità) EN 1078:2012+A clausola Fastening device (Verifica conformità) EN 1078:2012+A clausola Field of vision (Verifica conformità) EN 1078:2012+A clausola 4.3 General (Verifica conformità) EN 1078:2012+A clausola Information suplied by the manufacturer (Verifica conformità) EN 1078:2012+A clausola 7 Marking (Verifica conformità) EN 1078:2012+A clausola 6 Shock absorbing capacity (0-250 g) EN 1078:2012+A clausola 4.4 Strength (0-35 mm) EN 1078:2012+A clausola Connecting Components for Personal Fall Arrest Systems Dynamic drop test (Verifica conformità) ANSI/ASSE Z clausola tranne condizionamento descritto alla clausola (Accelerated Weathering) Hardware in a new and unused condition (Verifica conformità) ANSI/ASSE Z clausola Marking and instructions (Verifica conformità) ANSI/ASSE Z clausola 5 Mechanical tests for snaphooks and connectors (Verifica conformità) ANSI/ASSE Z clausola
5 Scheda 5 di 9 Mechanical tests for buckles, Oval Rings used as adjusters and other adjusters (Verifica conformità) ANSI/ASSE Z clausola Mechanical tests for D-Rings, O-Rings and Oval Rings (Verifica conformità) ANSI/ASSE Z clausola Proof load test (Verifica conformità) ANSI/ASSE Z clausola Surface Finish of Hardware (Verifica conformità) ANSI/ASSE Z clausola User inspection, maintenance and storage (Verifica conformità) ANSI/ASSE Z clausola 6 Connector (hardware) Components and Elements Connectors in a new and unused condition (Verifica conformità) ANSI/ASSE Z clausola Mechanical tests for connectors (Verifica conformità) ANSI/ASSE Z clausola Proof load test for snaphooks, carabiners, D-Rings and O-Rings (Verifica conformità) Strength test for tests for buckles, oval rings used as adjusters and other adjusters (Verifica conformità) Strength test for tests for D-Rings, O-Rings and Oval Rings (Verifica conformità) ANSI/ASSE Z clausola ANSI/ASSE Z clausola ANSI/ASSE Z clausola Surface Finish of Hardware (Verifica conformità) ANSI/ASSE Z clausola Connettori da alpinismo Design (Verifica conformità) EN12275:2013 clausola 4.1 Gate face (Verifica conformità) EN12275:2013 clausola Gate performance under load (Verifica conformità) EN12275:2013 clausola Gate side (Verifica conformità) EN12275:2013 clausola Information supplied by the manufacturer (Verifica conformità) EN12275:2013 clausola 7 Major axis with gate closed (0-31kN) EN12275:2013 clausola Major axis with gate open (0-31kN) EN12275:2013 clausola Marking (Verifica conformità) EN12275:2013 clausola 6 Minor axis (0-31kN) EN12275:2013 clausola Self-closing gates (Verifica conformità) EN12275:2013 clausola metodo Connettori da lavoro Gate face (Verifica conformità) EN362:2004 clausola Gate function (Verifica conformità) EN362:2004 clausola 4.3 Gate side (Verifica conformità) EN362:2004 clausola General (0-70 mm) EN362:2004 clausola 4.1 Marking and information (Verifica conformità) EN362:2004 clausola 4.6 Static strength (Verifica conformità) EN362:2004 clausola 4.2 Elmetti per sci alpino e snowboard Chin straps (>15 mm) EN1077:2007 clausola Durability (Verifica conformità) EN1077:2007 clausola 4.8 Effectivness (Verifica conformità) EN1077:2007 clausola Extent of coverage (Verifica conformità) EN1077:2007 clausola 4.4
6 Scheda 6 di 9 Fastening device (Verifica conformità) EN1077:2007 clausola Field of vision (Verifica conformità) EN1077:2007 clausola 4.3 General (Verifica conformità) EN1077:2007 clausola Information to be suplied by the manufacturer (Verifica conformità) EN1077:2007 clausola 7 Marking (Verifica conformità) EN1077:2007 clausola 6 Resistance to penetration (Verifica conformità) EN1077:2007 clausola 4.6 Shock absorbing capacity (0-250 g) EN1077:2007 clausola 4.5 Strength (0-35) EN1077:2007 clausola Full Body Harnesses Attachment Element requirements ( mm) Design Requirements (Verifica conformità) Load Bearing Straps (Verifica conformità) ANSI/ASSE Z clausola 3.2 ANSI/ASSE Z clausola 3.1 con eccezione del punto ANSI/ASSE Z clausola ad eccezione dei punti Load Bearing Straps (Verifica conformità) ANSI/ASSE Z punto Marking and instructions (Verifica conformità) ANSI/ASSE Z clausola 5 Thread and Stitching (Verifica conformità) ANSI/ASSE Z clausola User inspection, maintenance and storage of equipment (Verifica conformità) ANSI/ASSE Z clausola 6 imbragature da alpinismo Components (Verifica conformità) EN 12277:2007 clausola Dimensions of tapes (Verifica conformità) EN 12277:2007 clausola Information supplied by the manufacturer (Verifica conformità) EN 12277:2007 clausola 7 Marking (Verifica conformità) EN 12277:2007 clausola 6 Stability of tapes (Verifica conformità) EN 12277:2007 clausola Strength (Verifica conformità) EN 12277:2007 clausola 4.2 Threads (Verifica conformità) EN 12277:2007 clausola Indumenti di protezione contro l'impatto meccanico per motociclisti General (Verifica conformità) EN1621-1:2012 clausola 5.1 General (Verifica conformità) EN1621-2:2014 clausola 4.1 Impact attenuation (0-24 kn) EN1621-2:2014 clausola 4.4 Impact attenuation (0-50 kn) EN1621-1:2012 clausola 5.4 Information supplied by the manufacturer (Verifica conformità) EN1621-1:2012 clausola 8 Information supplied by the manufacturer (Verifica conformità) EN1621-2:2014 clausola 7 Marking (Verifica conformità) EN1621-1:2012 clausola 7 Marking (Verifica conformità) EN1621-2:2014 clausola 6 Minimum dimension of zone of protection (Verifica conformità) EN1621-1:2012 clausola 5.3 Minimum dimension of zones of protection (Verifica conformità) EN1621-2:2014 clausola 4.3 Sizing and size marking (Verifica conformità) EN1621-2:2014 clausola 4.6
7 Scheda 7 di 9 Personal Energy Absorbers and Energy Absorbing Lanyards Energy Absorbing Lanyard Component - Abrasion Test (Verifica conformità) ANSI/ASSE Z clausola Energy Absorbing Lanyard Component - Dynamic Performance Testing of Y-Lanyards (0-8 kn Energy Absorbing Lanyard Component - Energy Absorbing Lanyard Connectors (Verifica conformità) Energy Absorbing Lanyard Component - Energy Absorbing Lanyard Dynamic Performance - Ambient Dry Test (0-8 kn Energy Absorbing Lanyard Component - Energy Absorbing Lanyard Dynamic Performance - Conditioning Test (0-8 kn ANSI/ASSE Z clausola ANSI/ASSE Z clausola ANSI/ASSE Z clausola ANSI/ASSE Z clausola Energy Absorbing Lanyard Component - Material (Verifica conformità) ANSI/ASSE Z clausola Energy Absorbing Lanyard Component - Static Strength (Verifica conformità) ANSI/ASSE Z clausola Energy Absorbing Lanyard Component - Static Test - Wrap-Around Energy Absorbing Lanyards (Verifica conformità) Energy Absorbing Lanyard Component - Static Test - Y-Lanyards (Verifica conformità) ANSI/ASSE Z clausola ANSI/ASSE Z clausola Energy Absorbing Lanyard Component - Terminations (Verifica conformità) ANSI/ASSE Z clausola Marking and Reference Literature (Verifica conformità) ANSI/ASSE Z clausola 5 Personal Energy Absorber Component - Activation force (0-51 mm) ANSI/ASSE Z clausola Personal Energy Absorber Component - Connectors (Verifica conformità) ANSI/ASSE Z clausola Personal Energy Absorber Component - Deployment indicator (Verifica conformità) ANSI/ASSE Z clausola Personal Energy Absorber Component - Material (Verifica conformità) ANSI/ASSE Z clausola Personal Energy Absorber Component - Personal Energy Absorber Dynamic Performance - Ambient Dry Test (0-8 kn Personal Energy Absorber Component - Personal Energy Absorber Dynamic Performance - Conditioning Test (0-8 kn ANSI/ASSE Z clausola ANSI/ASSE Z clausola Personal Energy Absorber Component - Static strength (Verifica conformità) ANSI/ASSE Z clausola Personal Energy Absorber Component - Terminations (Verifica conformità) ANSI/ASSE Z clausola User inspection, maintenance and storage of equipment (Verifica conformità) ANSI/ASSE Z clausola 6 Protettori del piede e della gamba Compression resistance (>19,5 mm) EN12568:2010 clausola Corrosion resistance (0-2,5 mm) EN12568:2010 clausola Dimensions (>34 mm) EN12568:2010 clausola Dimensions (Verifica conformità) EN12568:2010 clausola Finishing (Verifica conformità) EN12568:2010 clausola Flexing resistance (Verifica conformità) EN12568:2010 clausola Impact resistance (>19,5 mm) EN12568:2010 clausola Resistance of nail penetration (Verifica conformità) EN12568:2010 clausola Special requirements for metal toe caps - Corrosion resistance (0-2,5 mm) EN12568:2010 clausola 4.3
8 Scheda 8 di 9 Special requirements for non-metal penetration resistant inserts - Stability against ageing and enviromental influence (Verifica conformità) Special requirements for non-metal toe caps - Stability against ageing and enviromental influence (>19,5 mm) EN12568:2010 clausola 6.4 EN12568:2010 clausola 4.4 Scarpe protettive per motociclisti Abrasion resistance - Insock (Verifica conformità) EN 13634:2010 clausola Abrasion resistance (0-20 s) EN 13634:2010 clausola Abrasion resistance (0-250 mm3) EN 13634:2010 clausola Abrasion resistance (Verifica conformità) EN 13634:2010 clausola Heigth of upper ( mm) EN 13634:2010 clausola Hydrolysis (0-6 mm) EN 13634:2010 clausola Impact cut resistance (0-30 mm) EN 13634:2010 clausola Impact protection of shin and ankle (0-25 kn) EN 13634:2010 clausola 5.1 Insole constuction (Verifica conformità) EN 13634:2010 clausola Interlayer bond strength (>4 N/mm) EN 13634:2010 clausola Marking (Verifica conformità) EN 13634:2010 clausola 7 Pictogram (Verifica conformità) EN 13634:2010 clausola 9 Seams (Verifica conformità) EN 13634:2010 clausola Tear strength (>30 N) EN 13634:2010 clausola Thickness and cleat heigth (>4 mm) EN 13634:2010 clausola Trasverse rigidity of whole footwear (>1 kn) EN 13634:2010 clausola 4.9 Upper/outsole bond strength (>4 N/mm) EN 13634:2010 clausola Water absorption and desorbtion (>70 mg/cm2 EN 13634:2010 clausola Wearer information and instruction for use (Verifica conformità) EN 13634:2010 clausola 8 Self-Retracting Devices for Personal Fall Arrest and Rescue System Corrosion protection (Verifica conformità) ANSI/ASSE Z clausola Dynamic performance (0-8 kn mm) ANSI/ASSE Z clausola tranne test clausola (edge test) Dynamic strength (Verifica conformità) ANSI/ASSE Z clausola Energy absorption (Verifica conformità) ANSI/ASSE Z clausola Integral connectors (Verifica conformità) ANSI/ASSE Z clausola Line Constituent of Self-Retracting Devices - SRL-LE Energy Absorber (>15 kn >4.8 mm) ANSI/ASSE Z clausola Line Constituent of Self-Retracting Devices - Syntetic Rope (>20 kn) ANSI/ASSE Z clausola Line Constituent of Self-Retracting Devices - Terminations (>15 kn >4.8 mm) ANSI/ASSE Z clausola Line Constituent of Self-Retracting Devices - Webbing (>20 kn) ANSI/ASSE Z clausola Line Constituent of Self-Retracting Devices - Wire Rope (>15 kn >4.8 mm) ANSI/ASSE Z clausola Marking and Instructions (Verifica conformità) ANSI/ASSE Z clausola 5
9 Scheda 9 di 9 Retraction tension (5.55 N < x < N ANSI/ASSE Z clausola Static strength (Verifica conformità) ANSI/ASSE Z clausola User inspection, maintenance and storage of equipment (Verifica conformità) ANSI/ASSE Z clausola 6. (Verifica conformità) ANSI/ASSE Z clausola Visual indicator (Verifica conformità) ANSI/ASSE Z clausola Legenda UNI = Ente Nazionale Italiano di Unificazione EN = European Committee for Standardization ISO = International Organization for Standardization ACCREDIA Il Direttore del Dipartimento (Dr.ssa Silvia Tramontin)
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS
More informationHorizontal Lifeline. SideWalk Rope. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment SideWalk Rope Horizontal Lifeline User Instructions User Instructions for the 3M TM Side Walk 2-Man Rope Horizontal Lifeline System.
More informationSafe Operating Procedure
Safe Operating Procedure (Revised 5/14) PERSONAL FALL ARREST SYSTEMS Introduction In 2011, falls to a lower level were the second leading cause of occupational fatalities across all industries, claiming
More informationUnderstanding the ANSI Z359 Fall Protection Code
Understanding the ANSI Z359 Fall Protection Code Understanding the ANSI Z359 Fall Protection Code Purpose of Document This document provides a basic understanding of the ANSI Z359 Fall Protection Code
More informationVERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # HD26249
VERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # HD26249 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationELENCO PROVE ACCREDITATE - CATEGORIA: 0
Scheda 1 di 8 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Concentrator photovoltaic (CPV) modules and assemblies 10.1 Ispezione visiva / Visual inspection IEC62108:2007 10.1 + CEI IEC 61215:2005 10.1 10.10
More informationFall Protection Guidelines
OCT 2015 1 of 6 Fall Protection Guidelines 1.0 PURPOSE To establish the requirements and procedures to protect employees and other persons conducting work from hazards associated with falling from one
More informationELENCO PROVE ACCREDITATE - CATEGORIA: 0
Scheda 1 di 7 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Crystalline silicon terrestrial photovoltaic (PV) modules 10.1 Ispezione visiva/visual inspection IEC 61215:2005 10.1 10.10 Prova di precondizionamento
More informationLanyards. Self Retracting. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment Self Retracting User Instructions Lanyards User Instructions for 3M TM Self Retracting Lanyards Important: Keep these User Instructions
More informationWire Rope Extender Lanyard
Reliance Industries, LLC User Instructions for Wire Rope Extender Lanyard Model # 714004 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650 Fax (303) 424-8670
More informationFrequently Asked Questions
ANSI Z359 Fall Protection Code (New Standards Effective November 16, 2009) ANSI Z359.6-2009 ANSI Z359.12-2009 ANSI Z359.13-2009 Frequently Asked Questions Q: What is ANSI? A: ANSI is an acronym for the
More informationIntroduction to Fall Protection
Introduction to Fall Protection with John Evinger CRSP (204)228-8277 INSERT YOUR LOGO HERE Expected results of the day Today I will provide you with information to make you realize that you don t have
More informationMountaineering and Climbing Equipment CONNECTORS / KARABINERS. Foreword
Mountaineering and Climbing Equipment CONNECTORS / KARABINERS UIAA 121 Foreword This UIAA Standard is only published in the English language version, which is the master text. For any validations in translation,
More informationOperations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn
Safety.. Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Technical: Zinc plated forged heat treated steel,
More informationD-Ring. Fixed Arm. 1.2 LIMITATIONS: The following application limitations must be recognized and considered before using this product:
Instructions for the following series products: Parapet Wall Anchor (model number: 8523178) User Instruction Manual for Parapet Wall Anchor This manual is intended to meet the Manufacturer s Instructions
More informationIntroduction to Fall Protection. The University of Tennessee Office of Environmental Health & Safety
Introduction to Fall Protection The University of Tennessee Office of Environmental Health & Safety What is Fall Protection? Fall protection is the backup system planned for a worker who could loose his
More informationELENCO PROVE ACCREDITATE - CATEGORIA: 0
Scheda 1 di 9 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Concentrator photovoltaic (CPV) modules and assemblies 10.1 Ispezione visiva / Visual inspection IEC 62108:2007 10.1 +IEC 61215:2005 10.1 10.10 Water
More informationIt should be noted that this revised standard does not address the construction industry, window cleaning belts, and sports-related activities.
ANSI Z359 OVERVIEW INTRODUCTION ANSI Z359.1 was introduced in 1992 when standards for common fall protection equipment and methods in the workplace did not exist. That year 600 work-related falls resulted
More informationSafe Operating Procedure
Safe Operating Procedure (Revised 11/15) PERSONAL PROTECTIVE EQUIPMENT (PPE) - FOOT PROTECTION EVALUATION AND CHECKLIST Protective footwear is necessary when there is risk of injury due to: A heavy object
More informationA New Era for an Old Standard A Review of Changes to ANSI Z359.1-1992(R1999)
Capital Safety - USA 3833 SALA Way Red Wing, MN 55066-5005 Ph: 651-388-8282 Fax: 651-388-5065 A New Era for an Old Standard A Review of Changes to ANSI Z359.1-1992(R1999) I. Introduction A new era is in
More informationHealth and Safety Resources Caution to Users
Health and Safety Resources Caution to Users Many of the resources in this archive were originally prepared by WSN s predecessor organizations for use by industry clients. While much of the information
More informationFall Protection Safety Program
Fall Protection Safety Program ENVIRONMENTAL HEALTH & SAFETY pg. 1 Table of Contents A. Introduction... 3 B. Scope... 3 C. Responsibilities... 3 1. Department... 3 2. Environmental Health & Safety (EHS)...
More informationFALL PROTECTION- Part 2 SELF INSPECTION CHECKLIST
OPTIONAL INFORMATION Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: FALL PROTECTION- Part 2 Instructions: This checklist covers fall protection systems criteria
More informationFall Protection. Solutions for Safety at Heights. Risk Assessment. Hierarchy of fall protection options. Supplementary Administration Controls
Solutions for Safety at Heights Risk Assessment Consult AS/NZS 1891.4 HIERARCHY OF CONTROLS, these are; IDENTIFY all potential fall hazards. ELIMINATE the need to access the potential hazard area. SUBSTITUTION
More informationOSHA 29 CFR 1926 Subpart M (1926.500-503) OSHA 29 CFR 1910 Subparts D,F, I (1910.23, 66, 67, and 132
OSHA 29 CFR 1926 Subpart M (1926.500-503) OSHA 29 CFR 1910 Subparts D,F, I (1910.23, 66, 67, and 132 Importance of Fall Protection Each year, approximately 14 percent of fatal workplace injuries are caused
More informationSample Fall Protection Program
Sample Fall Protection Program Revised August 2000 Table of Contents Page Purpose and Scope...3 Goals...3 Definitions...3 Types of Fall Protection Systems...6 Fall Protection Locations...6 Fall Protection
More informationFall Protection and Fall Prevention. San José State University Environmental Health and Safety Facilities Development & Operations
Fall Protection and Fall Prevention San José State University Environmental Health and Safety Facilities Development & Operations Learning Objectives To understand the hazards of falls To understand when
More informationGuide for the use of HANS in international motor sport The HANS (Head And Neck Support) head restraint Issue: 05/01/2005 1. Choosing a HANS HANS devices exist not only in different sizes but with different
More informationFall Protection Program
Fall Protection Program Policy: It is the policy of our company to provide fall protection for employees exposed to fall hazards greater than 7 ½ feet. Fall hazards include but, are not limited to; work
More informationBETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
More informationConstruction of a Fencing Mask
Academy of Historical Arts & HEMAC Construction of a Fencing Mask Author: Keith Farrell Version: 01 Date: 5th May 2012 Version and Copyright Information Version: 01 Date: 5th May 2012 Research: Copyright
More informationNZQA registered unit standard 23229 version 4 Page 1 of 6
Page 1 of 6 Title Use safety harness system when working at height Level 3 Credits 4 Purpose People credited with this unit standard are able to: demonstrate knowledge of the hazards associated with wearing
More informationWORKING AT HEIGHT & ITS WOES
WORKING AT HEIGHT & ITS WOES Capital Safety EMEA HOW FAR WILL A PERSON FALL IN...? TIME seconds DISTANCE metres 1 4.9 2 19.6 3 44.1 4 78.4 ABSOLUTELY ZERO MARGIN FOR ERROR! 2FT?!? 6FT?!? 50FT?!?! COMMON
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More information2016 Spring Fall Protection Construction Products
2016 Spring Fall Protection Construction Products Anchorage 3-Man Swiveling Roof Anchor 2103690 Reusable 3-man swiveling roof anchor for sloped wood structures with fasteners. Concrete D-ring Anchor 2104560
More informationUser Instruction Manual Vertical Lifelines and Vertical Lifeline Subsystems
Instructions for the following series products: User Instruction Manual Vertical Lifelines and Vertical Lifeline Subsystems Vertical Lifelines Vertical Lifeline Subsystems (See back pages for specific
More informationFrequently Addressed Topics in Fall Protection
PPEPERSPECTIVES FROM THE INTERNATIONAL SAFETY EQUIPMENT ASSOCIATION Frequently Addressed Topics in Fall Protection ISEA member companies collectively receive thousands of calls from employers, end-users
More informationHard-wearing safety shoes developed. for active work. where high demands comes first.
Hard-wearing safety shoes developed for active work where high demands comes first. Safety shoes L.Brador 760 A lace-up low safety shoe developed for active work where high demands are placed on comfort,
More informationWorking at Heights and Fall Protection
Standard Operating Procedures Working at Heights and Fall Protection Last Modified: JAN 2013 1 of 6 Working at Heights and Fall Protection I Purpose Serious accidents can result from falls. All employees
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationPART 17 SAFETY/RESCUE HARNESS JACKET TYPE M 500/1 BRIGADE ORDER TECHNICAL NO. 13 C O N T E N T S. Page No PURPOSE STRATEGIC AIMS AND OBJECTIVES
PURPOSE C O N T E N T S STRATEGIC AIMS AND OBJECTIVES ROLES, RESPONSIBILITIES AND REVIEW INTRODUCTION Page No 1 1 1 2 BRIGADE ORDER TECHNICAL NO. 13 DESCRIPTION 2 ISSUE/LOCATION 2 USE 3 SAFETY MAINTENANCE
More informationPersonal Protective Equipment FALL PROTECTION
NORTHWEST TERRITORIES & NUNAVUT CODES OF PRACTICE Personal Protective Equipment FALL PROTECTION HEAD OFFICE Yellowknife Box 8888, 5022 49th Street Centre Square Mall, 5th Floor Yellowknife, NT X1A 2R3
More informationFall Protection System: A system put in place to protect workers from falling. (i.e. installation of guardrails, fall arrest, fall restraint, etc.
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
More informationCavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
More informationWhat is Fall protection?
What is Fall protection? The Occupational Safety and Health Administration s (OSHA s) fall protection standard deals with both human and equipment-related issues. The standard identifies areas or activities
More informationTest Report No. C829QPEN
Institut für Solartechnik Hochschule für Technik Rapperswil Oberseestrasse 10, CH 8640 Rapperswil Tel +41 55 222 48 21, Fax +41 55 222 48 44 www.solarenergy.ch Ordered by: Westech Components Wuxi Co.,
More informationFLOORS REINFORCEMENT Shear Stud Connector for steel- concrete composite structures cold applied by pins
www.tecnaria.com FLOORS REINFORCEMENT Shear Stud Connector for steel concrete composite structures cold applied by pins HIGHPERFORMANCE FLOORS COMPOSITE STEEL AND CONCRETE STRUCTURES: STATIC AND ECONOMIC
More informationCardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
More informationEMPLOYEE FALL PROTECTION
EMPLOYEE FALL PROTECTION You can fall from any height and be seriously injured or killed. In the construction industry, as well as any other industry, when falls from heights happen, they are usually very
More informationSECTION 21. Fall Protection
SECTION 21 Fall Protection 21.A General. The requirements of this Section are applicable to all Government and C work forces when their employees are working at heights, exposed to fall hazards and/or
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More informationDepartment of Environmental Health & Safety. Fall Protection Program
Department of Environmental Health & Safety Fall Protection Program Issued by: Jeff Campbell Date Effective: March 2010 University Policy Ohio University is dedicated to the protection of its employees
More informationRemovable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
More informationFall Protection Guideline
EVERYONE'S RESPONSIBILITY Fall Protection Guideline July 2008 Fall Protection Guideline Workplace Safety & Health Division 200 401 York Avenue Winnipeg, Manitoba R3C 0P8 July 2008 The Province of Manitoba
More informationThe Work at Height Safety Association. Guidance on inspecting eyebolts used for personal fall protection purposes
The Work at Height Safety Association Technical Guidance Note 6 Guidance on inspecting eyebolts used for personal fall protection purposes A series of informative notes for all industries involved with
More informationConstruction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description
Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing
More informationOSHA 1910.66 Remove impacted systems and components. Inspect systems prior to use.
Q: When do I remove my harness from service? A: ANSI (American National Standards Institute) A10.32-2004 states the service life of fall protection equipment manufactured of synthetic fiber shall be 5
More informationPersonal Energy Absorbers Absorbing Lanyards
3M Occupational Health and Environmental Safety Fall Protection Equipment Personal Energy Absorbers andenergy Absorbing Lanyards User Instructions User Instructions for 3M TM Shock Pack, Low Profi le and
More informationPLEASE NOTE. For more information concerning the history of these regulations, please see the Table of Regulations.
PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to June 9, 2012. It is intended for information and reference purposes only.
More informationAPPENDIX 1 EUROPEAN STANDARDS AND MARKINGS FOR HEAD PROTECTION. ISSUE 8: January 2013
APPENDIX 1 EUROPEAN STANDARDS AND MARKINGS FOR HEAD PROTECTION ISSUE 8: January 2013 This information is extracted from British Standards with the permission of BSI under licence number PD\1998 1367 INTRODUCTION
More informationProduct Name: Beamer 2000
Product Name: Beamer 2000 Part #: 00101; 00103 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards
More informationTemporary Horizontal Lifeline System Manual Standard Duty - E8 Model: HLLA38030 and HLLA38060
P.O. Box 3026 Sherwood Park Alberta T8H 2T1 Phone: (780) 464-7139 Fax: (780) 464-7652 e-mail: inquiries@ safetydirect.ca Web site: www.safetydirect.ca Temporary Horizontal Lifeline System Manual Standard
More informationOccupational Health and Safety Code 2009 Part 9 Explanation Guide
Part 9 Fall Protection Highlights Section 138 allows rescue personnel involved in emergency rescue training or in providing emergency rescue services to use equipment and services other than those specified
More informationComparisons of Motorcycle Helmet Standards Snell M2005, M2010/M2015, DOT and ECE 22-05 Edward B. Becker, September 29, 2015
The following compares four standards: Snell M2005, Snell M2015/M2010, DOT, and ECE 22-05. M2005 and the current DOT Standard (Federal Motor Vehicle Safety Standard 218) apply largely to motorcycle helmets
More information1501-04-04-03-02:2009 HELLENIC CHNICAL SPECIFICATION. Sanitary ware for disabled persons. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 32199
ежглеяис тгс йубеямгсеыс (теувос еутеяо) 32199 2009-12-23 ICS 93160 1501-04-04-03-022009 H HELLENIC CHNICAL SPECIFICATION Sanitary ware for disabled persons 7 313 111 45 32200 ежглеяис тгс йубеямгсеыс
More informationSAFE WORKING AT HEIGHT REQUIREMENTS. www.heightsafety.com
SAFE WORKING AT HEIGHT REQUIREMENTS www.heightsafety.com Presentation to Friday, 07 August 2015 INDEX What is fall arrest What is rope access What is work positioning What does and anchor point consist
More informationISC/Singing Tree Rope Wrench (STRW)
ISC/Singing Tree Rope Wrench (STRW) System Recommendation June 2014 Background The ISC Rope Wrench is a device that allows DRT (double rope techniques) to be performed whilst using a single rope. This
More informationSURVIVING THE FALL: The Proper Use Of Your Personal Fall Arrest System
SURVIVING THE FALL: The Proper Use Of Your Personal Fall Arrest System This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief
More informationElkhorn Construction, Inc. Safety Manual Title: Fall Protection Policy Effective Date: 03-01-2000
1. General Requirements (OSHA References: OSHA 29 CFR 1926.503) 1.1 Elkhorn Construction, Inc. employee-owners and subcontractors are required to use fall protection equipment or systems when an assessment
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationSecure Them for Life. Child safety seats. From infant seats to seat belts, everything you need to know to ensure your child s safety.
Secure Them for Life Child safety seats From infant seats to seat belts, everything you need to know to ensure your child s safety. It s the law In a vehicle, children whose sitting height is less than
More informationFall Protection Equipment
Fall Protection Equipment Quick Tips #130 Introduction Before you can begin a fall protection program, you must identify the potential fall hazards in your workplace. Any time a worker is at a height of
More informationInstructions for the following series products:
Instructions for the following series products: Full Body Harnesses (See back pages for specific model numbers.) User Instruction Manual Full Body Harness This manual is intended to meet the Manufacturer
More informationUnderstanding BS EN 771-3: Aggregate concrete masonry units
60 Charles Street, Leicester LE1 1FB Tel: 0116 253 6161 Fax: 0116 251 4568 Email: enquiries@cba-blocks.org.uk Website: www.cba-blocks.org.uk February 2006 Understanding BS EN 771-3: Aggregate concrete
More informationWORKING AT HEIGHTS. Introduction. Risk Assessment
WORKING AT HEIGHTS Introduction This guideline makes reference to the provisions regarding working at heights in the Regulation for Industrial Establishments (Reg. 851) and the Regulation for Construction
More informationPERSONAL FALL PROTECTION. Travel-Restraint Systems. Fall-Arrest Systems
19 PERSONAL FALL PROTECTION A worker at risk of falling certain distances (see chapter on Guardrails in this manual) must be protected by guardrails or, if guardrails are not practical, by a travelrestraint
More informationFall protection systems and practices Duty to have fall protection Protection at or above 6' level.
Duty to have fall protection Protection at or above 6' level. Walking/working surfaces inspected before work begins. Employees can only work on surfaces strong enough to support them. Page 1 Protection
More informationEnclosures 1-866-338-0988. DuraSystems Barriers, Inc. www.durasystems.com Email: sales@durasystems.com. The Passive Fire Protection Specialists
Enclosures Sturdy single and double wall fire protection construction Impact resistant Fast & easy installation Pre-manufactured and modular Available in galvanized, stainless steel & other specialty metals
More informationInstallation, Operation & Maintenance Manual for Rigid Lifelines 8-4015, 8-4020, 8-4030, and 8-4031 Series Self-Retracting Lanyards
Manual 103-0051 REV. 6/14 Installation, Operation & Maintenance Manual for Rigid Lifelines 8-4015, 8-4020, 8-4030, and 8-4031 Series Self-Retracting Lanyards ISO 9001 REGISTERED RIGID LIFELINES 2 RIGID
More informationFall Protection Susan Harwood Grant Training Program 2013 Fall Arrest. OSHA Susan Harwood Training - AGC
Fall Protection Susan Harwood Grant Training Program 2013 Fall Arrest Learning Objectives Identify the components of a proper personal fall arrest system (PFAS) Understand how to calculate total fall distance
More informationINTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS. Published: April 1999
INTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS Published: April 1999 CONTENTS 1 Introduction 2 Test Procedures General 3 Standards and Specific Test Procedures
More informationSITE SPECIFIC FALL PROTECTION PLAN
1 THIS PLAN IS SPECIFIC TO: PROJECT & ADDRESS 1.1 THIS PLAN IS SPECIFIC TO THE FOLLOWING AREA(S) ON SITE: Parkade level: Typical level: Other: Between G/L: 1.2 THIS PLAN IS APPLICABLE TO THE FOLLOWING
More informationIntegrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
More informationComparisons EBB 11/12/02 Snell M2000, DOT, BSI 6658-85 Type A and EN 22/05
The tables compare four standards:, DOT, BSI 6658-85 Type A and Regulation 22 Rev. 5, also known as EN 22/05. and the current DOT Standard (Federal Motor Vehicle Safety Standard 218) apply largely to helmets
More informationCHECKLIST Fall Protection
Walking/working surfaces can support employees. Employees are protected from falling from elevated surfaces through the use of guardrail systems, safety net systems; personal fall arrest systems, controlled
More informationEUROPEAN STANDARD EN 343:2003 PROTECTION AGAINST RAIN
EUROPEAN STANDARD EN 343:2003 PROTECTION AGAINST RAIN Published by W. L. Gore & Associates Editorial support Petra Jackisch, Zentrum für Sicherheitstechnik, Erkrath, Germany Suitable protection against
More informationDesigned in Italy by EN 14-1
Designed in Italy by EN 14-1 The new range of Work Line tool bags is designed in Italy by GT Line and made exclusively for professionals looking for the most reliable companion to their heavy duty daily
More informationSede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.
centro ricerche-sviluppo e laboratori prove Date received: 12-11-13 Date of issue: 02-12-13 33048 S. Giovanni al at. UD OMP S.R.L. VIA CA' LEOCIO, 2 31030 CASTELLO DI GODEGO (TV) Report consists of 6 test
More informationEUROPEAN STANDARDS AND MARKINGS FOR HAND AND ARM PROTECTION
APPENDIX 5 EUROPEAN STANDARDS AND MARKINGS FOR HAND AND ARM PROTECTION ISSUE 8: January 2013 This information is extracted from British Standards with the permission of BSI under licence number PD\1998
More informationValu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
More information`Fall Protection Guidelines in Construction
`Fall Protection Guidelines in Construction A Publication Provided by: 1681 Campus Delivery Fort Collins, Colorado 80523 (970) 491-6151 email: ohss@lamar.colostate.edu web: http://www.bernardino.colostate.edu/public/
More informationFall Protection. Office of Risk Management. uottawa.ca. Guide
Fall Protection Guide Office of Risk Management.ca 1 Contents SCOPE... 1 INTENT... 1 LEGISLATION AND REQUIREMENTS... 1 RESPONSABILITIES... 2 Supervisors... 2 Workers... 2 Facilities... 2 HAZARD CONTROL...
More informationGE Wind Turbine Climbing Rules and Rescue from Height
GE Wind Turbine Climbing Rules and Rescue from Height Wind Turbine Climbing Rules This material has been prepared from our GE Wind Turbine Climbing Rules and procedure. Image Place Holder Image Place Holder
More informationMADE IN ITALY. Sistemi di connessione per fotovoltaico Connection systems for photovoltaic. TÜV certification EN 50521:2008 SC3
Sistemi di connessione per fotovoltaico Connection systems for photovoltaic TÜV certification EN 505:008 SC Tipologia di prodotto Definizione modelli Informazioni Valori nominali Indice Index Datasheet
More information4 Installation Requirements
4 Installation Requirements 9 4.1 Code Reference The authority having jurisdiction should be referenced to determine what law, ordinance or code shall apply in the use of flexible duct. Ducts conforming
More information4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
More informationProduct Data Sheet ROCKPANEL Rockclad
Product Data Sheet ROCKPANEL Rockclad Durable - Xtreme - FS-Xtra United Kingdom 1 Product description ROCKPANEL boards are prefabricated compressed mineral wool boards with synthetic binders. The surface
More informationOperating instructions. 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline
Reliance Industrial Products, LLC Operating instructions for 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline Model # 6095 Reliance Industrial Products PO Box 140008 Denver, CO 80214 Ph. (800)
More information