Roller Blinds. Betta Blinds and Awnings June 2019 PRICES DO NOT INCLUDE GST

Transcription

1 It is essential the measurements provided are accurate for the blinds to fit. Please take extra time to measure all of the windows/doors accurately and check measure twice. See Betta Blinds Fabric Collection at front of price list for fabrics available. Builders Range Blinds can only be ordered using our website online ordering system. When ordering online Select Product "Builders Range Rollers" Please Note: The following options are not available in Builders Range : Motors, Vogue Pelmets, Cassette Pelmets and Side Channels, Bumper Strip on Bottom Rail. Refer to Price List Grid page for other Builders Range limitations. (Select another category if options required are outside of limitations) Maximum width and drop in Builders Range Blinds are as per the price grids SPRING OPERATED not available. Spring Assist ($20/blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), unless Linked code 3 is selected and the individual blinds are less than this size. However, spring assist is also recommended for blinds over 3.6m2 (eg: 2000 x 1800). Spring Assist is not applicable to Motorised Blinds. A 10mm tolerance allowed before going to the next price increment. SIZE LIMITATIONS: MAXIMUM WIDTH 2430mm, MAXIMUM DROP 2200mm (blinds and skins over these sizes are not guaranteed, due to fabric instability causing distorted draping (veeing and stretching), and will not be replaced if problems occur). Fabric Manufacturers advise no guarantee past these maximum sizes. Ϫ If railroading of fabric is required, please make a note in the comments section on your order. Railroading is not warrantied. Please refer to Terms and Conditions. Bay Windows: Supply bracket to bracket (open size) measurements (after check measure). See measurement guide for more detail. Aluminium Bottom Rails: Round, Oval or Flat (with Insert) and the H1 trim are included in the price of the blind. Corner butting blinds: Please indicate on your order which two blinds are corner butting and nominate the through blind (see measurement guide for more detail). Roller and Sunscreen Blinds (Not available in Blinds under 600mm ) If not indicated on your Order Form a Pelmet is NOT supplied - surcharges apply Bracket Covers come standard with Face Fit Opening sizes are outside bracket to outside bracket (also refer to deduction guide) Please refer to our Fabric List for Maximum Sizes and restrictions, such as products which cannot be railroaded to increase width size. NB: Puckering: Some roller blinds will exhibit a deviation across the width of the fabric at the base rail. This may not be able to be completely eliminated and often depends on the characteristics of the fabric and ambient temperatures. Betta Blinds reserves the right to refuse an order if it cannot be manufactured to our company standards. Cancellations and changes to orders cannot be made once an order has already commenced production. Any cancellations or changes must also be made in writing. Charges will be made for any work completed including special fabric or components already ordered prior to cancellation/changes.

2 Side Channel Side Channel Surcharges: Dual Fixing Brackets $20 / pair of blinds (140mm Pelmet recommended - 90mm will not cover bracket) Linked Brackets Extension Brackets $20 per link $10 / pair Spring Assist $20 / blind (Mandatory for blinds 5 sq.mtr or more) Ϫ Railroading of Fabrics $30/blind (specify in comments column on order form) Stainless Steel Chain $10 / blind Side Channels *see notes below (Order with Cassette) Vogue Pelmets Dulux/Duralloy powder coat colours Over Length Freight Surcharge 4.2 metres or over Freight Surcharge - Home Delivery (Domestic address) Packaging & handling fee $80 / metre (Drop of Blind - includes both sides) $40 / metre ( of Blind if channel selected for bottom of blind*) $10/mtr, $70 minimum charge $62 per consignment $22 per consignment $30 For all blinds 2.5 metres in length and over * Precise measurements for Channel Sided blinds essential. Not available for linked blinds. Side Channels not recommended for Reveal Fit if window not Square A minuscule light bleed may occur at bottom of side channels for reveal blinds - this 2mm allowance enables the fitting of channels and cannot be eliminated. Cassette Pelmet Blind, including bottom rail, fits inside channels It is essential the measurements provided are accurate for the blinds to fit. Please take extra time to measure all of the windows/doors accurately and check measure twice. Betta Blinds reserves the right to refuse an order if it cannot be manufactured to our company standards. Cancellations and changes to orders cannot be made once an order has already commenced production. Any cancellations or changes must also be made in writing. Charges will be made for any work completed including special fabric or components already ordered prior to cancellation/changes. Bottom Channel

3 Options Bottom Trims Bottom Trim available in Round, Oval or Flat Aluminium Bottom Rail (with fabric insert), or H1 Trim (sewn bottom pocket with lathe inserted) Standard Chain Lengths DROP Chain Length (millimetres) Blinds 850 and under NB: Custom sized chain lengths are not an option on orders. Lathe These are our STANDARD chain lengths based on the drop of the blind. You are able to select a shorter or longer length than standard for that blind size. The length selected must be a standard size. For example, if the blind is 1500mm drop and you require a shorter chain, you should select size 750. Component Colours Available Oval Bottom Rail Brackets Flat Round Black, White, Birch White, Clear Anodised Chain Colours Plastic: Black, White, Birch White, Metal: Stainless Steel ** Oval Bottom Rail available with Bumper Strip (Black and Birch White will be available in July (TBC). The bumper will not be available in Chrome.) NB: Bumper strip not available in Builders Range Pelmets Vogue Cassette (Round or Square style) Linea with Fabric Insert Plantation (90 x 8 Woodlook) Classic Fabric Mocha, Lava, Rivergum (Beige), Black, White, Birch White, Clear Anodised, Chrome ** see note below With or Without Fabric Insert Option. Beige, Birch White, Black, Clear Anodised, White White, Black, Beige, Grey White, Black, Birch White, Clear Anodised, Rivergum (Beige), Chrome. Also available in Dulux/Duralloy colours (surcharge applies) Black, Clear Anodised, White, Birch White (Match to Side Channels and Bottom Rail) White, Black, Golden Oak, Ivory, Chrome (NB: Chrome is in a higher price bracket) Smooth: Arctic Snow, Ivory, Parchment. Printed: Desert, Sienna, Limewash, Ash, Dark Chestnut. Textured: Arctic Snow, Ivory 90mm Fabric and 140mm Fabric Butting Under One Pelmet For pricing these blinds: Price as individual blinds and pelmets. Pelmets will be made in one length to cover multiple blinds. Each blind will operate individually (i.e. Each blind must be left or right hand control) Double 2 Individual Blinds Under One Pelmet - No Linked Brackets Triple 3 Individual Blinds Under One Pelmet - No Linked Brackets Blind Number 1 Blind Number 2 Blind Number 1 Blind Number 2 Blind Number 3

4 Remote Control Systems for Please Note: Minimum width on motorised blinds is 600mm Single & Multi Channel Remote Price Situo RTS - handheld or wall mounted Pure $ 62 1 Channel Telis 6 Chronis RTS Pure (White) (6 Channel) $ 281 Silver, Rose Gold, Gold $ 82 1 Channel Telis 6 Chronis RTS Silver (6 Channel) $ 305 Pure $ 70 2 Channel Silver, Rose Gold, Gold $ 91 2 Channel Six channels to control six groups of applications. The clock function can Pure $ 93 5 Channel program up to six time slots per day every day of the week. Somfy rolling Silver, Rose Gold, Gold $ Channel code. 200m range in an open area and up to 20m range through two reinforced concrete walls. Allows for the individual or group control of RTS motors / receivers. Somfy Rolling Code. 200m range in an open area and up to 20m range through two reinforced concrete walls. Multi-Channel Remote Multi-Channel Remote RTS Motors * Telis 16 RTS Pure (White) (16 Channel) $ 262 Telis 16 RTS Silver (16 Channel) $ 289 WT Motors * Sonesse 40 Ultra quiet motors Price * One motor per blind (unless linked). Remote must also be selected Sonesse 40 3/30 RTS 3M White Cable with in line $ 343 connector (Hardwired Motor) Weight Limitation 10Kgs Controls sixteen channels or groups of applications. User can customise display. Somfy rolling code. 200m range in an open area and up to 20m range through two reinforced concrete walls. * Remote not required (suitable for Home Automation) Sonesse 40 3/30 2.5M White Cable with in line connector (Hardwired Motor) Weight Limitation 10Kgs $ 296 (RTS=Radio Transmission Signal) 5 Year Warranty on Somfy Motors Standard Somfy Terms and conditions apply. Home Automation Interface P.O.A.

5 Remote Control Systems for Please Note: Minimum width on motorised blinds is 600mm Decoflex Wall Mount RTS Transmitters Smoove Wall Mount RTS Transmitters Channel Black $ Origin (inc Pure Frame) $ Channel White $ Pure $ Silver $ 70 Wireless only. Have a range of 20m (suitable for 1 room) Black $ 70 Additional Decoflex Face Plate White $16.00 Smoove Wall Mount Frames Pure $ Silver $ Black $ Double Pure $ Light Bamboo $ Amber Bamboo $ 30 Home Automation Cherry $ Walnut $ 30 Connexoon Window RTS $ 210 (Must also select a Remote) Compatible with entire range of RTS products (RTS=Radio Transmission Signal) 5 Year Warranty on Somfy Motors Standard Somfy Terms and conditions apply

6 Remote Control Systems for Please Note: Minimum width on motorised blinds is 600mm Alpha Motors Warranty: 7 Year replacement warranty policy on motors Dynaveil Motors Warranty: 5 Year replacement warranty policy WSER40 5/28 Electronic Limit Switch + Built in Receiver Motor $ 198 RB28 Rechargeable Battery Motor. 28mm DIA. 0.8Nm 25rpm $245 Universal Weight Limitation 12Kgs Weight Limitation 5Kgs (including fabric and base bar) WSER 30B 2/31 Rechargeable Battery Motor (Charging Unit separate) * $ 245 AP102 Charging Unit * see note below $25 Weight Limitation 5Kgs (including fabric and base bar) Alpha Rechargeable Battery Motor is only available with 45mm Roller Tube C222 Six Channel Hand Held Remote Control * $60 WSERD 30B Charging Unit * see note below $ 45 * Intermediate Limits: There are 3 intermediate limits pre-programmed into the motor. Navigator Emitter Remote Controls These limits are 25%, 50% and 75%. The limits can WSRE301 1 Channel $ 84 be used by pressing either A, Centre or B on the WSRE302 5 Channel $ 84 You can also change the potitions of these 3 WSRE303-4C 4 Channel (LED) $ 102 intermediate stops. WSRE303-8C 8 Channel (LED) $ 102 WSRE303-16C 16 Channel (LED) $ 102 WSRE303-1T 1 Channel (LED) with Timer Function $ 139 WSRE303-4T 4 Channel (LED) with Timer Function $ 163 * We recommend just one Charging Unit per household. (for Alpha and Dynaveil battery operated motors) NB: Linked : Only Linked Code 3 is available with battery operated motors. NB: Cassette Style : Only the Dynaveil battery motor is compatible (Alpha Battery Motor is not compatible). AlphaNEO Smart Blinds link box $390 (intergrate to control blinds by Smart Phone or voice activation AlphaNEO has integration capabilities with both Amazon Alexa and Control 4, Integration with Google Home An Alpha Remote Control and Motor must also be selected (as above) Maximum Number of Channels: 240 Neo Link Box can only be selected for Alpha Motors. Betta Blinds and Awnings May 2019

7 Linked Brackets System The linked roller blind bracketing system is perfect for bi-fold and sliding doors and wide span windows, allowing multiple blinds to be linked together and neatly operated by either one or two chain control operating systems, thus reducing the gaps between blinds and dramatically improving both privacy and light. 1 2 blinds - 1 Linked Bracket - Left Hand Control Operation 4 3 Blinds - 2 Linked Brackets - Right Hand Control Operation for Right & Centre Blind, Left Hand Control Operation for Left Blind Blind number 1 Blind number 2 Blind number 1 Blind number 2 Blind number 3 20mm* 20mm 20mm 2 2 Blinds - 1 Linked Bracket - Right Hand Control Operation 5 3 Blinds - 2 Linked Brackets - Right Hand Control Operation for Right Blind, Left Hand Control Operation for Left & Centre Blind Blind number 1 Blind number 2 Blind number 1 Blind number 2 Blind number 3 20mm 20mm 20mm 2 Blinds - 1 Linked Bracket - Right Hand Control Operation for Right 3 Blind, Left Hand Control Operation for Left Blind 6 4 Blinds - 3 Linked Brackets - Right Hand Control Operation for 2 Blinds on Right, Left Hand Control Operation for 2 Blinds on Left Blind number 1 Blind number 2 Blind number 1 Blind number 2 Blind number 3 Blind number 4 20mm 20mm 20mm 20mm Manufacturing Tolerances Linked Blinds: The sizes and weight of different blinds can be factors which may cause bottom rails in linked blinds not to line up exactly. 20mm or 25mm is the gap taken up by the linking brackets between blinds NB: Codes 7 and 8 are only available for Motorised 7 3 Blinds - 2 Linked Brackets - Left Hand Motor Operation for Right, Centre & Left Blind Blind number 1 Blind number 2 Blind number 3 For pricing linked blinds: Price as individual blinds and add $20 per linked bracket. 8 3 Blinds - 2 Linked Brackets - Right Hand Motor Operation for Right, Centre & Left Blind NB: Linked option not available with Cassette Pelmets Blind number 1 Blind number 2 Blind number 3 Spring Assist ($20/chain) is recommended for linked blinds over 3.6m2 (eg: 2000 x 1800), unless code 3 is selected and the individual blinds are less than this size. Spring Assist ($20/blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), unless Linked code 3 is selected and the individual blinds are less than this size. Available with a single operating chain control on the left or right, and as independent controls for both ends.

8 and Drop Allowances: A 10mm tolerance is allowed before going to the next price increment Category: BR1 Builders Range Category When ordering online Select Product "Builders Range Rollers". Builders Range can only be ordered using our online ordering system via our website Category: BR2 Duo Light Filtering Duo Blockout Vibe Builders Range Blockout - These colours only: Cloud, Coal, Dune, Ice, Limestone, Loft, Duo Screen Orient, Pure, Whisper. For all other colours see Category Drop $ $ $ $ $ $ $ $ $ Drop $ $ $ $ $ $ $ $ $ Spring Assist ($20 per blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), unless Linked code 3 is selected and the individual blinds are less than this size. Please Note: In the above pricing the $20 surcharge has already been included in the prices shaded above. Please Note: The following options are not available in Builders Range : Motors Vogue Pelmets Cassette Pelmets Side Channels Blinds larger than Maximum 3020mm or Maximum Drop 3000mm Bracket Covers on Face Fit Blinds Fabric insert on Flat bottom rail Bumper Strip on Bottom Rail. Please refer to other Price Categories for pricing outside these restrictions. Betta Blinds and Awnings April 2018 NB: Puckering: Some roller blinds will exhibit a deviation across the width of the fabric at the base rail. This may not be able to be completely eliminated and often depends on the characteristics of the fabric and ambient temperatures Refer to the Surcharges tab. Pelmet Surcharges (per metre based on width of blind) : 90mm Fabric $ 30 Woodlook, Linea $ 25 Linea Chrome/140mm Fabric $ 65 Bottom Rail Colours: Birch White, Clear Anodised, Lava, Mocca, Black and White.

9 Drop Category 1 Category Drop $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ A 10mm tolerance is allowed before going to the next sized price increment. Price includes 200mm Roller Tube Coverage Please refer to Surcharges page. Pelmet Surcharges (per metre based on width of blind) : Component Colours Available: Please refer to the Options page in this section 90mm Fabric, Vogue $ 30 For motorised options and surcharges refer to Somfy and Alpha/Jai pages. Woodlook, Linea $ 25 Spring Assist ($20 per blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), Linea Chrome/140mm Fabric $ 65 unless Linked code 3 is selected and the individual blinds are less than this size. Please Note: In the Cassette (see surcharges page if you require side channels) $ 75 above pricing the $20 surcharge has already been included in the prices shaded above. Please deduct the $20 if you are quoting on Motorised blinds.

10 Drop Category 3 Category Drop $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ A 10mm tolerance is allowed before going to the next sized price increment. Price includes 200mm Roller Tube Coverage Please refer to Surcharges page. Pelmet Surcharges (per metre based on width of blind) : Component Colours Available: Please refer to the Options page in this section 90mm Fabric, Vogue $ 30 For motorised options and surcharges refer to Somfy and Alpha/Jai pages. Woodlook, Linea $ 25 Spring Assist ($20 per blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), Linea Chrome/140mm Fabric $ 65 unless Linked code 3 is selected and the individual blinds are less than this size. Please Note: In the Cassette (see surcharges page if you require side channels) $ 75 above pricing the $20 surcharge has already been included in the prices shaded above. Please deduct the $20 if you are quoting on Motorised blinds.

11 Drop Category 5 Category Drop $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ A 10mm tolerance is allowed before going to the next sized price increment. Price includes 200mm Roller Tube Coverage Please refer to Surcharges page. Pelmet Surcharges (per metre based on width of blind) : Component Colours Available: Please refer to the Options page in this section 90mm Fabric, Vogue $ 30 For motorised options and surcharges refer to Somfy and Alpha/Jai pages. Woodlook, Linea $ 25 Spring Assist ($20 per blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), Linea Chrome/140mm Fabric $ 65 unless Linked code 3 is selected and the individual blinds are less than this size. Please Note: In the Cassette (see surcharges page if you require side channels) $ 75 above pricing the $20 surcharge has already been included in the prices shaded above. Please deduct the $20 if you are quoting on Motorised blinds.

12 Drop Category 7 Category Drop $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ A 10mm tolerance is allowed before going to the next sized price increment. Price includes 200mm Roller Tube Coverage Please refer to Surcharges page. Pelmet Surcharges (per metre based on width of blind) : Component Colours Available: Please refer to the Options page in this section 90mm Fabric, Vogue $ 30 For motorised options and surcharges refer to Somfy and Alpha/Jai pages. Woodlook, Linea $ 25 Spring Assist ($20 per blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), Linea Chrome/140mm Fabric $ 65 unless Linked code 3 is selected and the individual blinds are less than this size. Please Note: In the Cassette (see surcharges page if you require side channels) $ 75 above pricing the $20 surcharge has already been included in the prices shaded above. Please deduct the $20 if you are quoting on Motorised blinds.

13 Drop Category 9 Category Drop $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ A 10mm tolerance is allowed before going to the next sized price increment. Price includes 200mm Roller Tube Coverage Please refer to Surcharges page. Pelmet Surcharges (per metre based on width of blind) : Component Colours Available: Please refer to the Options page in this section 90mm Fabric, Vogue $ 30 For motorised options and surcharges refer to Somfy and Alpha/Jai pages. Woodlook, Linea $ 25 Spring Assist ($20 per blind) is mandatory for blinds or linked blinds over 5.0m2 (eg: 2400 x 2100), Linea Chrome/140mm Fabric $ 65 unless Linked code 3 is selected and the individual blinds are less than this size. Please Note: In the Cassette (see surcharges page if you require side channels) $ 75 above pricing the $20 surcharge has already been included in the prices shaded above. Please deduct the $20 if you are quoting on Motorised blinds.