hp StorageWorks library and tape tools -

Transcription

1 Page 1 of 22 Support Ticket Date Generated: Date Viewed: Thu May 06 13:17: This Support Ticket contains information about the attached storage devices. It contains essential information, such as device configuration and logs. This information makes solving your problem faster and more reliable. Please generate report and /fax it to your support provider. This support ticket was generated at detail level "Everything". Table of Contents 1. System Information 1.1 System Configuration 1.2 Device Listing: By Connection 1.3 Device Listing: By Product 2. Detailed Device Information 2.1 Tape Drive at address (2/0.3.0) Support Ticket Identifier (dad1a e-48ee-a2be c1188f) 1. System Information System Model : IBM System x3650 -[797971Y]- Operating System : Windows Server 2003 Service Pack 2 Processor : 4 x Intel Pentium Class CPU (unknown, 2992 MHz) System Name : GR-LR-FPSRV2K3 Physical Memory : 2047 MB Tool Version : Version 4.10 (Build # 12) System Time : Thursday May :15: System Configuration Version # V Removable Storage Manager (RSM) Service - Stopped Insight Management Agents - Not installed Driver Revisions DAT driver not installed LTO driver not installed Scsiport driver version Storport driver version atapi: version adpu320: version arcsas: version

2 Page 2 of 22 HBA Information HBA Model: IBM ServeRAID 8k/8k-l Controller Driver: arcsas IRQ Channel: 17 Devices Connected: 0 HBA Model: Adaptec SCSI Card 29320ALP - Ultra320 SCSI Driver: adpu320 IRQ Channel: 24 Devices Connected: Device Listing: By Connection Host Bus Adapter 'adpu320 SCSI Adapter' at Address '2/0.7.0' Tape 'HP Ultrium 2-SCSI' at Address '2/0.3.0' Host Bus Adapter 'arcsas SCSI Adapter' at Address '3/ ' Host Bus Adapter 'arcsas SCSI Adapter' at Address '3/ ' Host Bus Adapter 'arcsas SCSI Adapter' at Address '3/ ' Host Bus Adapter 'arcsas SCSI Adapter' at Address '3/ ' Host Bus Adapter 'arcsas SCSI Adapter' at Address '3/ ' 1.3 Device Listing: By Product Libraries Drives Tape 'HP Ultrium 2-SCSI' at Address '2/0.3.0' Other Devices 2. Detailed Device Information 2.1 Tape Drive at address (2/0.3.0) L&TT Device History Increase the 'Current Detail Level' (at the top of the screen) for further information. For an explanation of the terms used in the report, please check the on-line L&TT user documentation. Drive Identity Drive Product ID : HP Ultrium 2-SCSI Format : LTO-2 (w/r), LTO-1 (w/r) Firmware : S65D/Standalone (Ver , Date 2008/04/08-09:28) Serial number : HU D SCSI Drive ID : 3 OBDR : Supported WORM : Not supported Interface Drive Capability : SCSI U160 Drive Health

3 Page 3 of 22 Drive Drive Configuration Drive Device Analysis : Failed version: V Firmware rev S65D is up-to-date for Ultrium 2-SCSI as of Wed May 1 Rule 7: Multiple errors have been reported while a cartridge is being push loa but it is not possible to identify if this is the same cartridge as the prev If this is a different cartridge, and if this drive is in a library, then the Please contact hp support for further assistance. Rule 8: Problems were reported trying to access a tape cartridge memory (Ser This could be a faulty tape or associated with an unsuccessful tape load It should only be considered a problem if it repeats with multiple tapes Try a different tape (ideally one that has been confirmed to be good in an Otherwise, try a new tape. hp recommends the use of hp storage media. Please run the LTO Drive Assessment Test to check the operation of y There were 20 rules checked. Device Analysis completed, and some problems were found. Write (last 0 tapes) : Unused Current tape (F9YFS6u673 LTO-2) load count 904 : Unused Previous tape (F6YPJ5x019 LTO-1 (cleaning tape)) load count 904: Previous tape ( LTO-2) load count 903 : Unused Previous tape (Z LTO-2) load count 903 : Unused Previous tape (F9YGFZD127 LTO-2) load count 903 : Unused Read (last 0 tapes) : Unused Current tape (F9YFS6u673 LTO-2) load count 904 : Unused Previous tape (F6YPJ5x019 LTO-1 (cleaning tape)) load count 904: Previous tape ( LTO-2) load count 903 : Unused Previous tape (Z LTO-2) load count 903 : Unused Previous tape (F9YGFZD127 LTO-2) load count 903 : Unused Head life : Great margin, 97% life remaining Reposition life : Great margin, 99% life remaining Load/unload life : Great margin, 98% life remaining Cleaning tape requested : No Data compression : Enabled Current block size : Not available Detect WORM tampering : WORM not supported Reads after WORM tampering : WORM not supported

4 Page 4 of 22 Media removal (software controlled) : Allowed Encryption/Decryption capability : None Encryption key size : n/a Interface SCSI Drive ID : 3 SCSI Host ID : 7 Negotiated burst data rate : 160 MB/s DT Mode : On Bus width : Wide Clock rate : 80 MHz Disconnect privilege : Allowed Req/Ack Offset : 64 Drive Environment Current temperature : 56.0 C - Warning, above maximum Maximum temperature since power cycle : 56.0 C - Warning, above maximum Minimum temperature since power cycle : 56.0 C - Warning, above maximum Drive Performance Drive Estimated native data rate (not available - insufficient data transferred) Current tape (F6YPJ5x019) : Not available - insufficient data transferred Previous tape ( ) : Not available - insufficient data transferred Previous tape (Z ) : Not available - insufficient data transferred Previous tape (F9YGFZD127) : Not available - insufficient data transferr Specified max native data rate : 24 MB / sec. Max data rate achieved (internal to drive) : Unknown Write compression ratio : Unknown Read compression ratio : Unknown Drive Usage Drive Power on time : 934 days, 8 hours, 15 minutes Tape Pulled : full volume equivalents Load/unload cycles : 904 (1% of expected life) Duty cycle : 13% Power cycles : 60 Cleans : 1 Firmware upgrades : 1 Native data volume read/written (last 5 tapes) : Unused Current tape (F9YFS6u673) : Unused Previous tape (F6YPJ5x019) : Unused Previous tape ( ) : Unused Previous tape (Z ) : Unused

5 Page 5 of 22 Drive History Event Log Previous tape (F9YGFZD127) : Unused Power-On Count: :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Tape (Media) Error Cleared - the Media :00: Tape_load_started :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Info Logging banks Not Switched - Drive just Pow :00: Firmware variant h :00: Hardware variant h :00: Code publication revision _S_6_5_D :00: Code revision number :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :00: Error (DR) Failure sequencing operation (status = :00: Tape (Media) Error Cleared - the Media :00: Tape Alert Flag LostStatisticsId cleared for port DM :00: Tape Alert Flag CleaningMediaId cleared for port D :00: Tape_load_started :00: Tape Alert Flag CleaningMediaId set for port DM_ :00: Tape Alert Flag CleaningMediaId set for port DM_ :00: Tape Alert Flag CleaningMediaId set for port DM_ :00: Drive_ready_for_operation :00: NVDS: Incremented the thread count, value now is :00: Tape Alert Flag LostStatisticsId set for port DM_A :00: Tape Alert Flag LostStatisticsId set for port DM_A :00: Tape Alert Flag LostStatisticsId set for port DM_SC :00: Power_on_with_tape_loaded :00: Write Protect sensor changed state to 1 (1 = Protect :00: Info Logging banks Not Switched - Drive just Pow :00: Firmware variant h :00: Hardware variant h :00: Code publication revision _S_6_5_D :00: Code revision number :00: Write Protect sensor changed state to 1 (1 = Protect

6 Page 6 of 22 Power-On Count: :01: Tape (Media) Error Set - the Media Erro :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag MediaId set for port DM_ADC_PO :01: Tape Alert Flag MediaId set for port DM_ACI_PO :01: Tape Alert Flag MediaId set for port DM_SCSI_PO :01: Media_error_prevented_load :01: Write Protect sensor changed state to 1 (1 = Protect :01: Tape (Media) Error Cleared - the Media :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Cartridge_Memory_Tape_Directory_corrupt_at_un :01: Error (DR) Failure sequencing operation (status = :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Tape (Media) Error Cleared - the Media :00: Tape_load_started :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Info Logging banks Not Switched - Drive just Pow :00: Firmware variant h :00: Hardware variant h :00: Code publication revision _S_6_5_D :00: Code revision number :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :01: Tape (Media) Error Set - the Media Erro :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag MediaId set for port DM_ADC_PO :01: Tape Alert Flag MediaId set for port DM_ACI_PO :01: Tape Alert Flag MediaId set for port DM_SCSI_PO :01: Media_error_prevented_load :01: Write Protect sensor changed state to 1 (1 = Protect

7 Page 7 of :01: Tape (Media) Error Cleared - the Media :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Cartridge_Memory_Tape_Directory_corrupt_at_un :01: Error (DR) Failure sequencing operation (status = :01: Write Protect sensor changed state to 0 (1 = Protect :01: Write Protect sensor changed state to 1 (1 = Protect :01: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Tape (Media) Error Cleared - the Media :00: Tape_load_started :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Info Logging banks Not Switched - Drive just Pow :00: Firmware variant h :00: Hardware variant h :00: Code publication revision _S_6_5_D :00: Code revision number :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :13: Tape Alert Flag LoadingFailureId cleared for port D :13: Tape Alert Flag MediaId cleared for port DM_ACI :13: Tape Alert Flag LoadingFailureId cleared for port D :13: Tape Alert Flag MediaId cleared for port DM_SCS :13: Tape_unloaded_ok :13: Unload Starting to unload tape :13: Tape (Media) Error Set - the Media Erro :13: Tape Alert Flag LoadingFailureId set for port DM_ :13: Tape Alert Flag LoadingFailureId set for port DM_ :13: Tape Alert Flag LoadingFailureId set for port DM_ :13: Tape Alert Flag MediaId set for port DM_ADC_PO :13: Tape Alert Flag MediaId set for port DM_ACI_PO :13: Tape Alert Flag MediaId set for port DM_SCSI_PO :13: Media_error_prevented_load :13: Write Protect sensor changed state to 1 (1 = Protect :13: Error (DR) Failure sequencing operation (status = :13: Write Protect sensor changed state to 0 (1 = Protect :13: Eject Eject Button pressed :13: Write Protect sensor changed state to 1 (1 = Protect

8 Page 8 of :12: Write Protect sensor changed state to 0 (1 = Protect :12: Write Protect sensor changed state to 1 (1 = Protect :12: Write Protect sensor changed state to 0 (1 = Protect :12: Write Protect sensor changed state to 1 (1 = Protect :12: Write Protect sensor changed state to 0 (1 = Protect :12: Write Protect sensor changed state to 1 (1 = Protect :12: Write Protect sensor changed state to 0 (1 = Protect :12: Tape (Media) Error Cleared - the Media :12: Tape_load_started :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Info Logging banks Not Switched - Drive just Pow :00: Firmware variant h :00: Hardware variant h :00: Code publication revision _S_6_5_D :00: Code revision number :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :08: Tape (Media) Error Set - the Media Erro :08: Tape Alert Flag LoadingFailureId set for port DM_ :08: Tape Alert Flag LoadingFailureId set for port DM_ :08: Tape Alert Flag LoadingFailureId set for port DM_ :08: Tape Alert Flag MediaId set for port DM_ADC_PO :08: Media_error_prevented_load :08: Write Protect sensor changed state to 1 (1 = Protect :08: Error (DR) Failure sequencing operation (status = :08: Write Protect sensor changed state to 0 (1 = Protect :08: Write Protect sensor changed state to 1 (1 = Protect :08: Write Protect sensor changed state to 0 (1 = Protect :08: Write Protect sensor changed state to 1 (1 = Protect :08: Write Protect sensor changed state to 0 (1 = Protect :08: Write Protect sensor changed state to 1 (1 = Protect :08: Write Protect sensor changed state to 0 (1 = Protect :08: Write Protect sensor changed state to 1 (1 = Protect :07: Write Protect sensor changed state to 0 (1 = Protect :07: Write Protect sensor changed state to 1 (1 = Protect :07: Write Protect sensor changed state to 0 (1 = Protect :07: Tape (Media) Error Cleared - the Media :07: Tape Alert Flag LoadingFailureId cleared for port D :07: Tape Alert Flag TapeDirectoryInvalidAt :07: Tape Alert Flag MediaId cleared for port DM_ADC

9 Page 9 of :07: Tape Alert Flag LoadingFailureId cleared for port D :07: Tape Alert Flag LoadingFailureId cleared for port D :07: Tape_load_started :07: Tape (Media) Error Set - the Media Erro :07: Tape Alert Flag LoadingFailureId set for port DM_ :07: Tape Alert Flag LoadingFailureId set for port DM_ :07: Tape Alert Flag LoadingFailureId set for port DM_ :07: Tape Alert Flag MediaId set for port DM_ADC_PO :07: Media_error_prevented_load :07: Write Protect sensor changed state to 1 (1 = Protect :07: Tape (Media) Error Cleared - the Media :07: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :07: Cartridge_Memory_Tape_Directory_corrupt_at_un :07: Error (DR) Failure sequencing operation (status = :07: Write Protect sensor changed state to 0 (1 = Protect :07: Write Protect sensor changed state to 1 (1 = Protect :06: Write Protect sensor changed state to 0 (1 = Protect :06: Write Protect sensor changed state to 1 (1 = Protect :06: Write Protect sensor changed state to 0 (1 = Protect :06: Write Protect sensor changed state to 1 (1 = Protect :06: Write Protect sensor changed state to 0 (1 = Protect :06: Write Protect sensor changed state to 1 (1 = Protect :06: Write Protect sensor changed state to 0 (1 = Protect :06: Tape (Media) Error Cleared - the Media :06: Tape Alert Flag LoadingFailureId cleared for port D :06: Tape Alert Flag TapeDirectoryInvalidAt :06: Tape Alert Flag MediaId cleared for port DM_ADC :06: Tape Alert Flag LoadingFailureId cleared for port D :06: Tape Alert Flag LoadingFailureId cleared for port D :06: Tape_load_started :06: Tape (Media) Error Set - the Media Erro :06: Tape Alert Flag LoadingFailureId set for port DM_ :06: Tape Alert Flag LoadingFailureId set for port DM_ :06: Tape Alert Flag LoadingFailureId set for port DM_ :06: Tape Alert Flag MediaId set for port DM_ADC_PO :06: Tape Alert Flag MediaId set for port DM_ACI_PO :06: Tape Alert Flag MediaId set for port DM_SCSI_PO :06: Media_error_prevented_load :06: Tape (Media) Error Cleared - the Media :06: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :06: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s

10 Page 10 of :06: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :06: Cartridge_Memory_Tape_Directory_corrupt_at_un :06: Write Protect sensor changed state to 1 (1 = Protect :06: Error (DR) Failure sequencing operation (status = :06: Write Protect sensor changed state to 0 (1 = Protect :06: Write Protect sensor changed state to 1 (1 = Protect :06: Write Protect sensor changed state to 0 (1 = Protect :05: Write Protect sensor changed state to 1 (1 = Protect :05: Write Protect sensor changed state to 0 (1 = Protect :05: Write Protect sensor changed state to 1 (1 = Protect :05: Write Protect sensor changed state to 0 (1 = Protect :05: Write Protect sensor changed state to 1 (1 = Protect :05: Write Protect sensor changed state to 0 (1 = Protect :05: Write Protect sensor changed state to 1 (1 = Protect :05: Write Protect sensor changed state to 0 (1 = Protect :05: Tape (Media) Error Cleared - the Media :05: Tape_load_started :00: Drive_ready_for_operation :00: FWUpgrd (DR) Firmware Upgrade Completed :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :01: Tape (Media) Error Set - the Media Erro :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag MediaId set for port DM_ADC_PO :01: Tape Alert Flag MediaId set for port DM_ACI_PO :01: Tape Alert Flag MediaId set for port DM_SCSI_PO :01: Media_error_prevented_load :01: Write Protect sensor changed state to 1 (1 = Protect :01: Tape (Media) Error Cleared - the Media :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Cartridge_Memory_Tape_Directory_corrupt_at_un :01: Error (DR) Failure sequencing operation (status = :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect

11 Page 11 of :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Tape (Media) Error Cleared - the Media :00: Tape_load_started :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :02: Tape (Media) Error Set - the Media Erro :02: Tape Alert Flag LoadingFailureId set for port DM_ :02: Tape Alert Flag LoadingFailureId set for port DM_ :02: Tape Alert Flag LoadingFailureId set for port DM_ :02: Tape Alert Flag MediaId set for port DM_ADC_PO :02: Media_error_prevented_load :02: Write Protect sensor changed state to 1 (1 = Protect :02: Tape (Media) Error Cleared - the Media :02: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :02: Cartridge_Memory_Tape_Directory_corrupt_at_un :02: Error (DR) Failure sequencing operation (status = :02: Write Protect sensor changed state to 0 (1 = Protect :02: Write Protect sensor changed state to 1 (1 = Protect :02: Write Protect sensor changed state to 0 (1 = Protect :02: Write Protect sensor changed state to 1 (1 = Protect :02: Write Protect sensor changed state to 0 (1 = Protect :02: Write Protect sensor changed state to 1 (1 = Protect :02: Write Protect sensor changed state to 0 (1 = Protect :02: Write Protect sensor changed state to 1 (1 = Protect :02: Write Protect sensor changed state to 0 (1 = Protect :02: Write Protect sensor changed state to 1 (1 = Protect :02: Tape Alert All Flags cleared for port DM_ADC_PO :02: SCSI TaskMgmtFunction invoked: SI_L :02: BusRst SCSI Bus Reset occurred :02: Write Protect sensor changed state to 0 (1 = Protect :02: Write Protect sensor changed state to 1 (1 = Protect :02: Write Protect sensor changed state to 0 (1 = Protect :02: Tape (Media) Error Cleared - the Media :02: Tape Alert Flag LoadingFailureId cleared for port D :02: Tape Alert Flag TapeDirectoryInvalidAt

12 Page 12 of :02: Tape Alert Flag MediaId cleared for port DM_ADC :02: Tape Alert Flag LoadingFailureId cleared for port D :02: Tape Alert Flag LoadingFailureId cleared for port D :02: Tape_load_started :01: Tape (Media) Error Set - the Media Erro :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag MediaId set for port DM_ADC_PO :01: Tape Alert Flag MediaId set for port DM_ACI_PO :01: Tape Alert Flag MediaId set for port DM_SCSI_PO :01: Media_error_prevented_load :01: Write Protect sensor changed state to 1 (1 = Protect :01: Tape (Media) Error Cleared - the Media :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Tape Alert Flag TapeDirectoryInvalidAtUnloadId s :01: Cartridge_Memory_Tape_Directory_corrupt_at_un :01: Error (DR) Failure sequencing operation (status = :01: Write Protect sensor changed state to 0 (1 = Protect :01: Write Protect sensor changed state to 1 (1 = Protect :01: Write Protect sensor changed state to 0 (1 = Protect :01: Write Protect sensor changed state to 1 (1 = Protect :01: Write Protect sensor changed state to 0 (1 = Protect :01: Write Protect sensor changed state to 1 (1 = Protect :01: Write Protect sensor changed state to 0 (1 = Protect :01: Write Protect sensor changed state to 1 (1 = Protect :01: Write Protect sensor changed state to 0 (1 = Protect :01: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 0 (1 = Protect :00: Tape (Media) Error Cleared - the Media :00: Tape_load_started :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :02: ChkCond Command returned Check Con :02: Tape (Media) Error Set - the Media Erro :02: Tape Alert Flag MemoryChipInCartridgeFailureId :02: Tape Alert Flag MemoryChipInCartridgeFailureId :02: Tape Alert Flag MemoryChipInCartridgeFailureId

13 Page 13 of :02: Failed_to_read_Cartridge_Memory Hardware_err :01: Tape_unloaded_ok :01: Unload Starting to unload tape :01: Type: 0 (0=Unload, 1=Load), Immediate: 1, Partial :01: Cmd SI_SCSI_OPCODE_LOAD_UNLO :00: Drive_ready_for_operation :00: Write Protect sensor changed state to 1 (1 = Protect :00: Write Protect sensor changed state to 1 (1 = Protect Power-On Count: :01: Tape_unloaded_ok :01: Unload Starting to unload tape :01: Tape Alert Flag LoadingFailureId cleared for port D :01: Tape Alert Flag LostStatisticsId cleared for port DM :01: Tape Alert Flag MediaId cleared for port DM_ACI :01: Tape Alert Flag LoadingFailureId cleared for port D :01: Tape Alert Flag LostStatisticsId cleared for port DM :01: Tape Alert Flag MediaId cleared for port DM_SCS :01: Tape_unloaded_ok :01: Eject Eject Button pressed :01: Write Protect sensor changed state to 1 (1 = Protect :01: Tape Alert Flag ForcedEjectId set for port DM_AD :01: Tape Alert Flag ForcedEjectId set for port DM_AC :01: Tape Alert Flag ForcedEjectId set for port DM_SC :01: Forced_eject_has_been_activated :01: Unload Starting to unload tape :01: FrtPnl Forced Eject Button pressed :01: BusRst SCSI Bus Reset occurred :01: Tape (Media) Error Set - the Media Erro :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag LoadingFailureId set for port DM_ :01: Tape Alert Flag MediaId set for port DM_ADC_PO :01: Tape Alert Flag MediaId set for port DM_ACI_PO :01: Tape Alert Flag MediaId set for port DM_SCSI_PO :01: Media_error_prevented_load :01: Drive Error Set - the Drive Error LED an :00: Error (DR) Failure sequencing operation (status = :00: Tape (Media) Error Cleared - the Media :00: Tape Alert Flag LostStatisticsId cleared for port DM :00: Tape_load_started :00: Drive_ready_for_operation

14 Page 14 of :00: Tape Alert Flag LostStatisticsId set for port DM_A :00: Tape Alert Flag LostStatisticsId set for port DM_A :00: Tape Alert Flag LostStatisticsId set for port DM_SC :00: Power_on_with_tape_loaded :00: Write Protect sensor changed state to 0 (1 = Protect Power-On Count: :01: Error (DR) Errors returned to host Time Power/Load Count Error Code Cartridge SN 000:02: / x8015 CM_EOT_POLL_TO F9YFS6u673 Drive assessment test history no assessment test results Device analysis history Drive mechanism: No problems have been identified with the drive mechanism. Drive PCA: No problems have been identified with the drive PCA. Write / Read capability: No write / read problems were identified with the drive. Cartridge problems: No cartridge related problems were identified with the drive. Miscellaneous problems: Rule Number : 9 Rule Description : Host reported errors Problem description : A parity erro Recommended action(s) : Please power Problem was last reported : 00:00:16:26 pow Rule Number : 14 Rule Description : Operating temperature erro Problem description : There are in Recommended action(s) : Please c : before attempting to re-use it, then run the : LTO Cooling Check. Problem was last reported : 00:00:44:31 pow (loaded tape) Cartridge Identity Vendor : HP Format : LTO-2 Capacity : 150 GB (native), 300 GB (assuming 2:1 compression) Serial number : F9YFS6u673 Barcode : Unknown

15 Page 15 of 22 Manufactured : 17/12/2009 Cartridge Health Data on tape : Not enough data Drive measurements : Unused Current drive (HU D) : Unused (write), Unused (read) Previous drive () : Unused (write), Unused (read) Previous drive () : Unused (write), Unused (read) Write/read life : Great margin, 100% life remaining (0.0 full volume equivalents used Load/unload life : Great margin, 100% life remaining (0 load/unloads used out of 20,0 Cartridge Configuration Write protected : No WORM : No Cartridge Environment Current temperature in drive : 56.0 C - Warning, above maximum Maximum temperature in last 3 drives : 56.0 C - Warning, above maximum Current drive (HU D) : 56.0 C - Warning, above maximum Minimum temperature in last 3 drives : 56.0 C - Warning, above maximum Current drive (HU D) : 56.0 C - Warning, above maximum Cartridge Performance Estimated native data rate (not available - insufficient data transferred) Current drive () : Unknown Previous drive () : Unknown Previous drive () : Unknown Cartridge Usage Native capacity used : 0 KB (0%) Remaining native capacity : 150 GB Maximum native capacity : 150 GB Native data volume read/written in last 3 drives : Unused Current drive (HU D) : Unused Previous drive () : Unused Previous drive () : Unused Cartridge History No problems related to this cartridge identified in the Device Analysis History of t Classic Support Ticket SCSI Test Unit Ready returns status check condition SCSI Info : ( ) : LUN in process of becoming ready Vendor ID :HP Product ID :Ultrium 2-SCSI Firmware Revision :S65D Controller Serial Number :HU D OBDR :Supported

16 Page 16 of 22 Personality :Standalone-0x2C02 Medium SerialNumber/Barcode :unknown/unknown Device Time Stamps Power On Count :60 Power On Time :000:00:4 [hh:mm:ss] [Valid] World Time :0 [Invalid] Library Time :0:0:0 [hh:mm:ss] [Invalid] Temperature Measurements Maximum Temperature : 82 Minimum Temperature : 19 Current Temp Sensor 1 : 56 Write Error Rate Log Datasets Written : CCQ Sets Written : CCQ Set Retries : Unwritable Datasets : Read Error Rate Log Datasets Read : CCQ Sets Read :FFFFFFFF Subdataset C2 Errors : Dataset C2 Errors : X-Chan Interpolations : Write Error Counters Datasets Written :0 Rewritten Datasets :0 Rewritten CCQs :0 Unwritable Datasets :0 Read Error Counters Reread Datasets :0 Reread C2 :0 Datasets Read :0 Unreadable Datasets :0 Sequential Access Counters Bytes Written from App :0x Bytes Written to Tape :0x Bytes Read from Tape :0x Bytes Read to App :0x Cleaning Required :False Tape Usage Log Thread Count :0 Total Datasets Written :0x

17 Page 17 of 22 Total Write Retries :0 Total Unrecovered Write Errors :0 Total Suspended Writes :0 Total Fatal Suspended Writes :0 Total Datasets Read :0x Total Read Retries :0 Total Unrecovered Read Errors :0 Tape Capacity Log Main Partition Remaining Capacity : (MB) Main Partition Maximum Capacity : (MB) Media Usage Table Manufacturer License Code Type Length Uses HP U103 LTO2 Data HP U102 LTO2 Data HP U102 LTO1 Clean HP U109 LTO2 Data Write Fault Counters Tapes Used Logs Cartridge Memory Mech EEPROM Performance Log Direction Changes per 100MB :0 Data Rate After Compression :0 MB/s Maximum Data Rate :0 MB/s Data Rate Before Compression :0 MB/s Data Compression Log Read Compression Percentage :0 Write Compression Percentage :0 MB to Host :0 Bytes to Host :0 MB from Tape :0 Bytes from Tape :0 MB from Host :0 Bytes from Host :0 MB to Tape :0 Bytes to Tape :0 Fault Log SCSI Command History PCycle ExCnt Time CDB Status ASCQ ExecTime IID LUN Count SCSI Co :00: C01A62D BC / :00: C01A /

18 Page 18 of :00: / In :00: / In :00: / Re :00: A/ T :00: C01B / R :00: D / Send D :00: A C / M :00: C / In :00: C / In :00: / Re :00: D / In :00: / In :00: / In :00: C / R :00: / Re :00: C / R :00: C019A00 1A / R :00: D C / S :00: / Re :00: A/ T :00: C / R :00: D / S :00: C / R :00: C / R :00: A003C / M :00: A C / M :00: A000F00 1C / M :00: A C / M :00: / Re :00: D / In :00: C / In :00: C / In :00: E / In :00: C / In :00: C0183FF FF / R :00: C0182FF FF / R :00: C0181FF FF / R :00: C018DFF FF / R :00: C0180FF FF / R :00: / In :00: / In

19 Page 19 of :00: / Re :00: A/ T :00: / Re :00: A/ T :00: C01B / R :00: D / Send D :00: A C / M :00: C / In :11: B FE / W :11: / Re :11: B / W :11: B FE / W :11: / Re :11: B / W :11: B / W :11: C019A00 1A / R :11: D C / S :11: / Re :11: A/ T :11: C / R :11: D / S :11: D / L :11: D / L :11: D / L :11: D004C / L :11: D C / L :11: D C / L :11: D / L :11: / Re :11: A/ T :11: / Re :11: A/ T :11: / Re :11: A/ T :11: C01AA04 BF / :11: C01AA / R :11: C01B / R :11: C01B / R :11: C01AB01 1C / R :11: C01AB / R :11: C01A / R

20 Page 20 of :11: C01A / R :11: C01A523 E / R :11: C01A / R :11: C01AE99 EA / Rece :11: C01AE / Rece :11: C E / R :11: C / R :11: C A / R :11: C / R :11: C01B / R :11: D / Send D :11: C / R :11: C / R :11: C / R :11: C / R :11: C / R :11: C / R :11: C01A63D C / :11: C01A / :11: / In :11: / In :10: B / W :09: B FE / W :09: / Re :09: B / W :09: B FE / W :09: / Re :09: B / W :09: B / W :09: C019A00 1A / R :09: D C / S :09: / Re :09: A/ T :09: C / R :09: D / S :09: D / L :09: D / L :09: D / L :09: D004C / L :09: D C / L :09: D C / L

21 Page 21 of :09: D / L :09: / Re :09: A/ T :09: / Re :09: A/ T :09: / Re :09: A/ T :09: C01AA04 BF / :09: C01AA / R :09: C01B / R :09: C01B / R :09: C01AB01 1C / R :09: C01AB / R :09: C01A / R :09: C01A / R :09: C01A523 E / R :09: C01A / R :09: C01AE99 EA / Rece :09: C01AE / Rece :09: C E / R :09: C / R :09: C A / R :09: C / R :09: C01B / R :09: D / Send D :09: C / R :09: C / R SCSI Configuration PCycle Time(hh:mm:ss) Bus Mode Speed Limit SCSI Addr :00: LVD Ultra 3 Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Allowed, (0x09) 12.5ns :00: LVD No Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Allowed, (0x09) 12.5ns :01: LVD No Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Allowed, (0x09) 12.5ns :01: LVD No Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Allowed, (0x09) 12.5ns :01: LVD Ultra 3 Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Allowed, (0x09) 12.5ns :06: LVD Ultra 3 Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Not Allowed,

22 Page 22 of 22 Datasets :04: LVD Ultra 3 Speed Limit 3 Init7:DT Mode On, Wide, Disconnect Privilege - Allowed, (0x09) 12.5ns ACI Command History PCycle Time (sec) Entry Type Payload Bytes Primitive Bit Cmd Seq # Payload 0 000:00: (Command Received) The command received: 0x0000 ACI Configuration PCycle Time (hh:mm:ss) Baud Rate Stop Bit Auto Flag Ntfy Flag Resp Perd :00: C :00: C :00: C :00: C :00: C :00: C :00: C 0 0 Drive Trace Log