List of Publications
|
|
|
- Angel Holt
- 10 years ago
- Views:
Transcription
1 Scientific publications L. Hermansson, J. Lööf, T. Jarmar INTEGRATION MECHANISMS TOWARDS HARD TISSUE OF CA-ALUMINATE BASED BIOMATERIALS Bioceramics 21. To be published in Key Engineering Materials S. Iftekhar, J. Grins, G. Svensson, J. Lööf, T. Jarmar, G.A. Botton, C.M. Andrei, H. Engqvist PHASE FORMATION OF CAAL 2 O 4 FROM CACO 3 -AL 2 O 3 POWDER MIXTURES Journal of the European Ceramic Society 28 (2008) J. Lööf, F. Svahn, T. Jarmar, H. Engqvist, C.H. Pameijer A COMPARATIVE STUDY OF THE BIOACTIVITY OF THREE MATERIALS FOR DENTAL APPLICATIONS Dental materials, May (2008), Vol 24, Issue 5, J. Heinrichs, T. Jarmar, M. Roth, H. Engqvist IN VITRO BIOACTIVITY OF ATOMIC LAYER DEPOSITED TITANIUM DIOXIDE ON TITANIUM AND SILICON SUBSTRATES Key Engineering Materials, Vols (2008), T. Jarmar, T. Uhlin, U. Höglund, P. Thomsen, L. Hermansson, H. Engqvist INJECTABLE BONE CEMENTS FOR VERTEBROPLASTY STUDIED IN SHEEP VERTEBRAE WITH ELECTRON MICROSCOPY Key Engineering Materials, Vols (2008), J. Lööf, A. Faris, L. Hermansson, H. Engqvist IN VITRO BIOMECHANICAL TESTING OF TWO INJECTABLE MATERIALS FOR VERTEBROPLASTY IN DIFFERENT SYNTHETIC BONE Key Engineering Materials Vols (2008) K. Breding, H. Engqvist STRENGTH AND CHEMICAL STABILITY DUE TO AGING OF TWO BONE VOID FILLER MATERIALS Key Engineering Materials Vols , (2008), H. Engqvist, T. Persson, J. Lööf, A. Faris, L. Hermansson CHEMICAL STABILITY OF A NOVEL BIOCERAMIC FOR STABILISATION OF VERTEBRAL COMPRESSION Trends Biomater. Artif. Organs Vol 21 (2) (2008) H Engqvist, L. Kraft, K. Lindqvist, N-O. Ahnfelt, L Hermansson FLEXURAL STRENGTH MEASUREMENT OF CERAMIC DENTAL RESTORATIVE MATERIALS J. Advanced Materials, Vol. 39(1) (2007), E. Coutinho, A.Faris, T. Jarmar, F. Svahn, J. Loof, H. Engqvist, B. Van Meerbeck ULTRASTRUCTURAL CHARACTERIZATION OF TOOTH-BIOMATERIAL INTERFACES PREPARED WITH FOCUSED ION BEAMS Submitted to Journal of Dental Research (2007) J. Malmström, T. Jarmar, E. Adolfsson, H. Engqvist, P. Thomsen, STRUCTURE OF THE INTERFACE BETWEEN BONE AND SCAFFOLDS OF ZIRCONIA AND HYDROZYAPATITE Submitted to Journal of Materials Science, Materials in Medicine (2007) 2006 H. Engqvist, T. Jarmar, F. Svahn, L. Hermansson, P. Thomsen, CHARACTERIZATION OF THE TISSUE-BIOCERAMIC INTERFACE IN-VIVO USING NEW PREPARATION AND ANALYTICAL TOOLS Advances in Science and Technology, Vol. 49 (2006), (10)
2 H. Engqvist, G. A. Botton, M. Couillard, S. Mohammadi, J. Malmström, L. Emanuelsson, L. Hermansson, M. W. Phaneuf, P. Thomsen A NOVEL TOOL FOR HIGH-RESOLUTION TRANSMISSION ELECTRON MICROSCOPY OF INTACT INTERFACES BETWEEN BONE AND METALLIC IMPLANTS Journal of Biomedical Materials Research, 78A (2006), A. Faris, S. Tadier, T. Jarmar, L. Hermansson, H. Engqvist THE USE OF THE CRATER GRINDING METHOD TO EVALUATE THIN COATINGS FOR BIOMEDICAL APPLICATIONS Tribologia, Vol 25 Nr 2 (2006), 3-7 R. Gupta, H. Engqvist STRESS DISTRIBUTION IN TEETH DUE TO EXPANSION OR CONTRACTION OF THE RESTORATIVE MATERIAL Key Engineering Materials, Vols (May 2006), A. Faris, H. Engqvist, J. Lööf, M. Ottosson, L. Hermansson IN VITRO BIOACTIVITY OF INJECTABLE CERAMIC ORTHOPAEDIC CEMENTS Key Engineering Materials, Vols (May 2006), H. Engqvist, S. Edlund, G. Gomez-Ortega, J. Loof, L. Hermansson IN VITRO MECHANICAL PROPERTIES OF A CALCIUM SILICATE BASED BONE VOID FILLER Key Engineering Materials, Vols (May 2006), L. Hermansson, H. Engqvist, J. Lööf, G. Gómez-Ortega, K.Björklund NANO-SIZE BIOMATERIALS BASED ON CA-ALUMINATE Advances in Science and Technology, Vol. 49 (2006), H. Engqvist, M. Couillard, G. A. Botton, M. W. Phaneuf, N. Axén, N-O. Ahnfelt, L. Hermansson IN VIVO BIOACTIVITY OF A NOVEL MINERAL BASED ORTHOPAEDIC BIOCEMENT Trends in Biomaterials and Artificial Organs, Vol. 19 No. 1 (2005), T. Björneståhl, H. Spengler, H. Engqvist, N-O Ahnfelt, L Hermansson DEVELOPMENT OF A DENTAL HYBRID MATERIAL BETWEEN A BIOMINERAL AND A GLASS IONOMER CEMENT Key Engineering Materials Vols (2005), N. Axén, H. Engqvist, J. Lööf, P. Thomsen, L. Hermansson IN VIVO HYDRATING CALCIUM ALUMINATE COATINGS FOR ANCHORING OF METAL IMPLANTS IN BONE Key Engineering Materials Vols (2005), J. Lööf, Håkan Engqvist, Gunilla Gómez-Ortega, Håkan Spengler, Nils-Otto Ahnfelt, Leif Hermansson MECHANICAL PROPERTY ASPECTS OF A BIOMINERAL BASED DENTAL RESTORATIVE SYSTEM Key Engineering Materials Vols (2005), H. Engqvist, L. Kraft, H. Spengler, L Hermansson A NOVEL BIOMINERAL WATER BASED DENTAL CEMENT Key Engineering Materials Vols (2005), L. Kraft, H. Engqvist, L. Hermansson EARLY-AGE DEFORMATION, DRYING SHRINKAGE AND THERMAL DILATION IN A NEW TYPE OF DENTAL RESTORATIVE MATERIAL BASED ON CALCIUM ALUMINATE CEMENT Cement and Concrete Research 34 (2004), (10)
3 N. Axén, T. Persson, K. Björklund, H. Engqvist and L. Hermansson AN INJECTABLE BONE VOID FILLER CEMENT BASED ON CA-ALUMINATE Key Engineering Materials Vols (2004), J. Loof, H. Engqvist, G. Gómez-Ortega, N-O. Ahnfelt, L. Hermansson THE INFLUENCE OF CONDENSING TECHNIQUE AND ACCELERATOR CONCENTRATION ON SOME MECHANICAL PROPERTIES OF AN EXPERIMENTAL BIOCERAMIC DENTAL RESTORATIVE MATERIAL Key Engineering Materials Vols (2004), J. Loof, H. Engqvist, L. Hermansson, N. O. Ahnfelt MECHANICAL TESTING OF CHEMICALLY BONDED BIOACTIVE CERAMIC MATERIALS Key Engineering Materials Vols (2004), H. Engqvist, J-E. Schultz-Walz, J. Loof, G. A. Botton, D. Mayer, M. W. Phaneuf, N-O. Ahnfelt, L. Hermansson CHEMICAL AND BIOLOGICAL INTEGRATION OF A MOULDABLE BIOACTIVE CERAMIC MATERIAL CAPABLE OF FORMING APATITE IN VIVO IN TEETH Biomaterials vol 25 (2004), H. Engqvist, J. Loof, S. Uppstrom, M. W. Phaneuf, J. C. Jonsson, L. Hermansson, N-O. Ahnfelt TRANSMITTANCE OF A BIOCERAMIC CALCIUM ALUMINATE BASED DENTAL RESTORATIVE MATERIAL Journal of Biomedical Materials Research Part B: Applied Biomaterials vol. 69 no. 1 (2004), L. Hermansson, L. Kraft and H. Engqvist CHEMICALLY BONDED CERAMICS AS BIOMATERIALS Key Engineering Materials Vol. 247 (2003), J. Loof, H. Engqvist, K. Lindqvist, N-O. Ahnfelt, L. Hermansson MECHANICAL PROPERTIES OF A PERMANENT DENTAL RESTORATIVE MATERIAL BASED ON CALCIUM ALUMINATE Journal of Materials Science: Materials in Medicine, Vol. 14, No. 12, (December 2003), H. Engqvist, S. Uppström, L. Kraft, N.-O. Ahnfelt, L. Hermansson, S. Hogmark ABRASIVE WEAR OF A BIOCERAMIC DENTAL FILLING MATERIAL Tribologia Vol. 21 Nr. 4 (2002), L. Kraft and L. Hermansson HARDNESS AND DIMENSIONAL STABILITY OF A BIOCERAMIC DENTAL FILLING MATERIAL BASED ON CALCIUM ALUMINATE CEMENT Proc American Ceramic Society Vol 23B, No 4 (2002) 2000 J. Li, L. Hermansson HIGH STRENGTH ALUMINATE CEMENT PRODUCED BY COLD ISOSTATIC PRESSING J. Mater. Sci 35, (2000), E. Adolfsson, L. Hermansson PHASE STABILITY ASPECTS OF VARIOUS APATITE-ALUMINIUM OXIDE COMPOSITES J. Mater. Sci 35, (2000), (10)
4 E. Adolfsson, P. Aberius Henning and L. Hermansson, PHASE ANALYSIS AND THERMAL STABILITY OF HOT ISOSTATICALLY PRESSED ZIRCONIA-HYDROXYAPATITE COMPOSITES J. Amer Ceram Soc 83, (2000), E. Adolfsson and L Hermansson DECOMPOSITION MECHANISMS IN ALUMINIUM OXIDE-APATITE SYSTEMS J. Amer Ceram Soc 82, (1999), E. Adolfsson and L. Hermansson ZIRCONIA-FLUORAPATITE MATERIALS PRODUCED BY HIP Biomaterials 20 (1999), Peer Reviewed Conference Proceedings 2009 L. Hermansson, A. Faris, G. Gómez-Ortega, J. Kuoppala, J. Lööf ASPECTS OF DENTAL APPLICATIONS BASED ON MATERIALS IN THE SYSTEM CAO-AL 2 O 3 -P 2 O 5 -H 2 0 Advanced Ceramics and Composites, ACSM 2009, Daytona Beach, FL L. Hermansson, A. Faris, G. Gómez-Ortega, J. Lööf BIOCOMPATIBILITY ASPECTS OF INJECTABLE CHEMICALLY BONDED CERAMICS IN THE SYSTEM CAO-AL 2 O 3 -P 2 O 5 -SI0 2 Advanced Ceramics and Composites, ACSM 2009, Daytona Beach, FL 2008 L. Hermansson, J. Lööf, T. Jarmar, INJECTABLE CERAMICS AS BIOMATERIALS: TODAY AND TOMORROW ICC 2, Verona, 2008 L. Hermansson MULTI-PURPOSE USE OF CA-ALUMINATE AS BIOMATERIALS 11 th Ceramics: Cells and Tissue Proceedings 2007 L. Hermansson MULTI-PURPOSE USE OF CA-ALUMINATE AS BIOMATERIALS 11 th Ceramics: Cells and tissue, Faenza, (October 2007) 2006 P. Thomsen, F. Suska, L. Emanuelsson, A. Johansson, T. Jarmar, H. Engqvist PRECLINICAL IN VIVO MODELS TO STUDY THE INFLAMMATORY RESPONSE TO IMPLANTS CIMTEC, Sicily, Italy (2006) L. Hermansson, H. Engqvist, J. Lööf, G. Gómez-Ortega, K. Björklung NANO-SIZE BIOMATERIALS BASED ON CA-ALUMINATE CIMTEC, Sicily, Italy (2006) H. Engqvist, T. Jarmar, F. Svahn, L. Hermansson, P. Thomsen, CHARACTERIZATION OF THE TISSUE-BIOCERAMIC INTERFACE IN VIVO USING NEW PREPARATION AND ANALYTICAL TOOLS CIMTEC, Sicily, Italy (2006) (10)
5 L. Hermansson and H. Engqvist CHEMICALLY BONDED CERAMICS BASED ON CA-ALUMINATES AN OVERVIEW Proceeding 30 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites (January 2006) H. Engqvist and L. Hermansson ALKALINE CHEMICALLY BONDED CERAMICS AND PH CONTROL Proceeding 30 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites (January 2006) L. Hermansson, H. Engqvist INORGANIC CEMENT-BASED SYSTEMS AS BIOMATERIALS 2 nd International Symposium on Advances in Concrete through Science and Engineering, Quebec City, Canada (2006) Håkan Engqvist and Leif Hermansson CHEMICALLY BONDED NANO-SIZE BIOCERAMICS BASED ON CA-ALUMINATES AND SILICATES Ceramic Transactions, Vol. 172 (2006), L. Hermansson and H. Engqvist FORMATION OF NANO-SIZED APATITE COATINGS ON CHEMICALLY BONDED CERAMICS Ceramic Transactions, Vol. 172 (2006), H. Engqvist, E. Abrahamsson, J. Lööf, L. Hermansson MICROLEAKAGE OF A DENTAL RESTORATIVE MATERIAL BASED ON BIOMINERALS Proceeding 29 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites (January 2005) N. Axen, N-O. Ahnfelt, T. Persson, L. Hermansson, J. Sanchez, R. Larsson A COMPARATIVE EVALUATION OF ORTHOPAEDIC CEMENTS IN HUMAN WHOLE BLOOD Proceeding 29 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites (January 2005) H. Engqvist, H. Spengler, N-O Ahnfelt and L. Hermansson CHEMICALLY BONDED CERAMICS WITH AN ADDITIONAL ORGANIC BINDING SYSTEM Ceramic Transactions Volume Bioceramics: Materials and Applications V (2005) L. Hermansson, A. E. Åbom, H. Engqvist, J. Loof, N. Axén A SYSTEM FOR IN-VIVO ANCHORING OF IMPLANTS TO HARD TISSUE Ceramic Transactions, Volume Bioceramics: Materials and Applications V (2005) H. Engqvist, J. Loof, L. Kraft, L. Hermansson APATITE FORMATION ON A BIOMINERAL BASED DENTAL FILLING MATERIAL Ceramic Transactions, Volume Bioceramics: Materials and Applications V (2005) 2004 A. Pallas, H. Engqvist, S. Jacobsson, L. Hermansson SCRATCH TESTING OF A DENTAL RESTORATIVE MATERIAL BASED ON CALCIUM ALUMINATE Proceeding 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Vol. 25:4 (2004) (10)
6 A. Pallas, H. Engqvist, L-Å Lindén, L. Hermansson WEAR OF A BIOCERAMIC DENTAL RESTORATIVE MATERIAL BY TOOTH BRUSHING Proceeding 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Vol. 25:4 (2004) N. Axén, L. M. Bjursten, H. Engqvist, N-O Ahnfelt, L. Hermansson ZONE FORMATION AT THE INTERFACE BETWEEN CA-ALUMINATE CEMENT AND BONE TISSUE ENVIRONMENT Ceramics, Cells and Tissues, 9th Annual Seminar & Meeting, Faenza, Italy (2004) H. Engqvist, M. Couillard, G.A. Botton, N. Axén, N.O. Ahnfelt, L.Hermansson CHEMICAL INTERACTIONS BETWEEN CA-ALUMINATE IMPLANTS AND BONE 28 th Int. Conf. Adv. Ceramics and Composites Volume 25 (2004) 4: L. Kraft, L. Hermansson DEFORMATION CHARACTERISTICS IN VARIOUS CA ADMIXTURES INVESTIGATED WITH THREE DIFFERENT METHODS Kassel (2004) 2003 L. Hermansson, H. Engqvist, L. Kraft, N. Axén, N-O. Ahnfelt CHEMICALLY BONDED BIOACTIVE CA-ALUMINATE BASED CERAMICS AS DENTAL AND ORTHOPAEDIC MATERIALS Second international conference on new biomedical materials, Cardiff, Wales, UK (2003) 2002 H. Engqvist, J. Loof, S. Uppstrom, N-O. Ahnfelt, L. Hermansson TRANSMITTANCE AND HYDRATION OF A RADIO OPAQUE CALCIUM ALUMINATE BASED DENTAL MATERIAL Science of cement and concrete, Greenwich, England (2002) H. Engqvist, S. Uppstrom, L. Kraft, N-O. Ahnfelt, L. Hermansson, S. Hogmark ABRASIVE WEAR OF A BIOCERAMIC DENTAL FILLING MATERIAL Proceeding Nordtrib (2002) 2000 L. Kraft, L. Hermansson, Gunilla Gómez-Ortega A METHOD FOR THE EXAMINATION OF GEOMETRICAL CHANGES IN CEMENT PASTE International RILEM 17, (2000) Peer Reviewed Conference Abstracts 2009 S. Jefferies, C.H. Pameijer, D. Appleby, D. Boston ONE MONTH AND SIX-MONTH CLINICAL PERFORMANCE OF XERACEM J. Dent. Res. 88(A), 3146, 2009 C.H. Pameijer, O. Zmener, F. Garcia-Godoy, J.S. Alvarez-Serrano SEALING OF XERACEM, AND CONTROLS USING A BACTERIAL LEAKAGE MODEL J. Dent. Res. 88(A), 3145, 2009 L. Kraft, M. Saksi, L. Hermansson, C.H. Pameijer A FIVE-YEAR RETROSPECTIVE CLINICAL STUDY OF A CALCIUM-ALUMINATE IN RETROGRADE ENDONTICS J. Dent. Res. 88(A), 1333, (10)
7 2008 T. Jarmar, J.Lööf, H. Engqvist, L. Hermansson CHEMICAL AND MICROSTRUCTURAL ASPECTS ON THE CONTACT ZONE ESTABLISHMENT AND INTEGRATION OF CA- ALUMINATE BASED BIOMATERIALS ONTO HARD TISSUE Presented at the Griboi 2008 Conference C.H. Pameijer, S.R. Jefferies, J. Lööf, L. Hermansson, E. Wiksell IN VITRO AND IN VIVO BIOCOMPATIBILITY TESTS OF XERACEM J. Dent. Res. 87(B), 3097, 2008 C.H. Pameijer, S. Jefferies, J. Lööf, L. Hermansson MICROLEAKAGE EVALUATION OF XERACEM IN CEMENTED CROWNS J. Dent. Res. 87(B), 3098, 2008 S.R. Jefferies, J. Lööf, C.H. Pameijer, D. Boston, C. Galbraith, L. Hermansson PHYSICAL PROPERTIES OF XERACEM J. Dent. Res. 87(B), 3100, C.H. Pameijer, S.R. Jefferies, J. Lööf, L. Hermansson A COMPARATIVE CROWN RETENTION TEST USING XERACEM J. Dent. Res. 87(B), 3099, L Hermansson MULTI-PURPOSE USE OF CA-ALUMINATE AS BIOATERIALS 11 th Ceramics: Cells and tissue, Faenza, (October 2007) Leif Hermansson, Lars Kraft, Karin Lindqvist, N-O Ahnfelt and Håkan Engqvist FLEXURAL STRENGTH MEASUREMENT OF CERAMIC DENTAL RESTORATIVE MATERIALS Bioceramics 20 (2007) H. Engqvist, A. Palmqvist, F. Lindberg, T. Jarmar, R. Branemark, L. Emanuelsson, P. Thomsen TRANSMISSION ELECTRON MICROSCOPY OF INTERFACES BETWEEN HARD TISSUE AND BIOMATERIALS European Cells and Materials 14, 61 (2007) J. Heinrichs, T. Jarmar, M. Rooth, H. Enqvist IN VITRO BIOACTIVITY OF ATOMIC LAYER DEPOSITED TITANIUM DIOXIDE ON TITANIUM AND SILICON SUBSTRATES Bioceramics (2007) T. Jarmar, T. Uhlin, U. Höglund, P. Thomsen, L. Hermansson and H. Engqvist INJECTABLE BONE CEMENTS FOR VERTEBROPLASTY STUDIED IN SHEEP VERTEBRAE WITH ELECTRON MICROSCOPY Bioceramics (2007) T. Uhlin PHYSICAL PROPERTIES OF AN INJECTABLE BIOCERAMIC MATERIAL (XERASPINE ) DESIGNED FOR VERTEBROPLASTY Poster presentation. 53 rd Annual Meeting of the Orthopaedic Research Society, February (2007) San Diego, USA. A. Gevargez, K. Björklund, T. Uhlin; S. Larsson S, B. Karlmark AN INJECTABLE HIGH STRENGTH BIOCERAMIC FOR THE TREATMENT OF VERTEBRAL COMPRESSION FRACTURES Presentation. 17 th Interdisciplinary Research Conference on Biomaterials, Oxford, UK, April 2-3 (2007) (10)
8 T. Uhlin, H. Engqvist, T. Jarmar, K. Björklund, U. Höglund EXPERIMENTAL STUDY OF BONE INTEGRATION BETWEEN XERASPINE AND SHEET VERTEBRAE Poster Presentation (12). 17 th Interdisciplinary Research Conference on Biomaterials, Oxford, UK, April 2-3 (2007) A.U. Höglund, J. Sanchez, T. Persson, T. Uhlin, H. Engqvist, K. Bjorklund, R. Larsson A COMPARATIVE EVALUATION OF THE IN VITRO HEMOCOMPATIBILITY OF ORTHOPAEDIC CEMENTS Poster Presentation (13). 17 th Interdisciplinary Research Conference on Biomaterials, Oxford, UK April 2-3 (2007) T. Persson, H. Engqvist COMPRESSIVE STRENGTH DEVELOPMENT OF XERASPINE DUE TO AGING IN PBS Poster Presentation (14). 17 th Interdisciplinary Research Conference on Biomaterials, Oxford, UK April 2-3 (2007) 2006 T. Jarmar, J. Malmström, A. Palmquist, L. Emanuelsson, R. Brånemark, P. Thomsen and H. Engqvist PIONEERING TEM SAMPLE PREPARATION AND ANALYSIS OF THE INTERFACE BETWEEN TISSUE AND implant MATERIAL Poster presentation at Biointerface Science 2006, Les Diablerets, Switzerland, October (2006) L. Hermansson, T. Jarmar and H. Engqvist CHEMICAL ASPECTS OF BIOACTIVE INJECTABLE BIOMATERIALS BASED ON CHEMICALLY BONDED CERAMICS Poster presentation at Biointerfaces - Quo Vadis? Gothenburg, Sweden, August (2006) A. Palmquist, T. Jarmar, H. Engqvist, R. Brånemark, P. Thomsen TEM SAMPLE PREPARATION USING FOCUSED ION BEAM MICROSCOPY APPLIED ON INTERFACES BETWEEN TISSUE AND IMPLANT MATERIAL Poster presentation at Biointerfaces - Quo Vadis? Gothenburg, Sweden, August (2006) H. Engqvist, T. Jarmar, A. Palmquist, R. Brånemark and P. Thomsen A NOVEL TEM SAMPLE PREPARATION METHOD COMBINED WITH HIGH RESOLUTION ANALYSIS OF THE INTERFACE BETWEEN TISSUE AND IMPLANT MATERIAL Poster presentation at Medicinteknikdagarna, Uppsala, Sweden (2006) T. Jarmar, J. Malmström, A. Palmquist, L. Emanuelsson, E. Adolfsson, R. Brånemark, H. Engqvist, P. Thomsen HIGH RESOLUTION TEM ANALYSIS OF INTERFACES BETWEEN BIOMATERIALS AND TISSUE 20 th European Conference on Biomaterials (2006) H. Spengler, L. Hermansson, H. Engqvist EVALUATION OF THE COHESIVENESS OF INJECTABLE CA-ALUMINATE BASED MATERIALS IN WATER AND SIMULATED BODY FLUID DURING CURING 16 th interdisciplinary research conference on biomaterials, Bern (2006) L. Hermansson, A. Faris, H. Engqvist EVALUATION OF IN VITRO BIOACTIVITY OF DIFFERENT TYPES OF BIOMATERIALS 16 th interdisciplinary research conference on biomaterials, Bern (2006) (10)
9 2005 Håkan Engqvist and Leif Hermansson IN VITRO AND IN VIVO BIOACTIVITY OF CHEMICALLY BONDED CERAMICS IN THE SYSTEM CAO-P 2 O 5 - AL 2 O 3 -SIO 2 Conference on Tissue Engineering and Regenerative Medicine 2005, Linköping, Sweden (2005) H. Engqvist, G. A. Botton, M. Couillard, S. Mohammadi, J. Malmström, L. Emanuelsson, L. Hermansson, M. W. Phaneuf, P. Thomsen A NEW TECHNIQUE OF HIGH RESOLUTION IMAGING OF INTACT INTERFACES BETWEEN METALLIC IMPLANTS AND BONE 19 th European Conference on Biomaterials (2005) H. Engqvist, S. Edlund, G. Gomèz-Ortega, L. Hermansson RESORBABLE CHEMICALLY BONDED CERAMICS BASED ON CA-SILICATES 19 th European Conference on Biomaterials (2005) 2003 L Kraft, J. Loof, H. Engqvist, L. Hermansson and N. -O. Ahnfelt MECHANISMS OF DIMENSIONAL CHANGES IN CALCIUM ALUMINATE-BASED MATERIALS Journal of Dental Research, Vol 82, Issue B, June (2003), 36 H. Engqvist, J. Loof, L. Kraft, J. -E. Schultz-Walz, N. -O. Ahnfelt and L.Hermansson BIOACTIVITY OF A CALCIUM ALUMINATE BASED DENTAL RESTORATIVE MATERIAL Journal of Dental Research, Vol 82, Issue B, June (2003), 36 R. Gupta and H. Engqvist STRESS DISTRIBUTION IN TEETH DUE TO DIMENSIONAL CHANGES OF RESTORATIVE MATERIALS Journal of Dental Research, Vol 82, Issue B, June (2003), 203 H. Engqvist, J. Loof, N.-O. Ahnfelt, and L. Hermansson CHEMICAL INTEGRATION BETWEEN A CALCIUM ALUMINATE-BASED DENTAL RESTORATIVE MATERIAL AND TEETH Dental Materials Conference, Bergen, Norway (2003) 2000 L Kraft, G Gomez-Ortega and L Hermansson SOME ASPECTS OF CA-ALUMINATE CEMENTS AS POTENTIAL DENTAL RESTORATIVE MATERIALS American Ceramic Society Annual Meeting, Abstract Book, St Louis (2000) L Kraft, J Li, L-Å Lindén and L Hermansson SIMULATED WEAR OF DENTAL FILLING MATERIALS NordTrib Conference (2000) 1999 L Kraft and L Hermansson DIMENSIONAL STABILITY IN HIGH ALUMINA CEMENTS American Ceramic Society Annual Meeting, Abstract Book, Indianapolis (1999) (10)
10 PhD Theses (guidance) CALCIUM-ALUMINATE AS BIOMATERIAL: SYNTHESIS, DESIGN AND EVALUATION J. Lööf. Faculty of Science and Technology, Uppsala, University, Sweden (2008) CALCIUM ALUMINATE BASED CEMENT AS DENTAL RESTORATIVE MATERIALS L. Kraft. Faculty of Science and Technology, Uppsala University, Sweden (2002) PHASE STABILITY AND PREPARATION OF OXIDE-APATITE COMPOSITES E. Adolfsson. Dept. Inorganic Chemistry, Stockholm University, Sweden (1999) DEVELOPMENT OF HIGH-STRENGTH BIOACTIVE CERAMIC COMPOSITES J. Li. Dept. Prosthodontics, Karolinska Institute, Stockholm, Sweden (1992) (10)
BIOACTIVE COATINGS ON 316L STAINLESS STEEL IMPLANTS
Trends Biomater. Artif. Organs. Vol. 17(2) pp 43-47 (2004) http//www.sbaoi.org BIOACTIVE COATINGS ON 316L STAINLESS STEEL IMPLANTS N. Ramesh Babu*,+, Sushant Manwatkar*, K. Prasada Rao* and T. S. Sampath
Technology Breakthrough in Spinal Implants (Technical Insights)
Technology Breakthrough in Spinal Implants (Technical Insights) Biomaterial innovations is a growth factor for spinal implant market June 2014 Table of Contents Section Page Number Executive Summary 4
DENT 5351 Final Examination 2007 NAME
NAME DENT 5351 Spring Semester 2007 INTRDUCTIN T BIMATERIALS FINAL EXAMINATIN (40 questions) February 16, 2007 8:00 a.m. 9:00 a.m. This final examination consists of 7 pages and 40 questions. Mark all
Assoc. Prof. Dr. M. Aylin DELİORMANLI
Assoc. Prof. Dr. M. Aylin DELİORMANLI EDUCATION Degree University Department / Program Undergrad Ege University Chemical Engineering 99 99 M.S. Izmir Institute of Tech. Materials Science and Engineering
ZIRCONIA INFORMATION FOR DENTISTS. FAQ S from the dental practice ENGLISH
ZIRCONIA INFORMATION FOR DENTISTS FAQ S from the dental practice ENGLISH Zr Facts and Answers 2 Facts and Answers What is Zirconia? Zirconium (ZrSiO ) belongs to the mineral group of silicates and 4 was
WEEKLY COURSE SCHEDULE : PRIMARY EDUCATION
WEEKLY COURSE SCHEDULE : PRIMARY EDUCATION Semester 1 Week 1 ( 19.09.2011-23.09.2011 ) Introduction to sol-gel processes Properties of X-Rays General Explanations on Process Planning Introduction Semester
Pulsed laser deposition of organic materials
Pulsed laser deposition of organic materials PhD theses Gabriella Kecskeméti Department of Optics and Quantum Electronics University of Szeged Supervisor: Dr. Béla Hopp senior research fellow Department
SURFACE MODIFICATION OF METAL IMPLANTS WITH PLASMA SPRAYED LAYERS
SURFACE MODIFICATION OF METAL IMPLANTS WITH PLASMA SPRAYED LAYERS Prof. János Takács Budapest University of Technology and Economics (BME) Ozsváth Péter MSc Budapest University of Technology and Economics
Jacket crown. Advantage : Crown and Bridge
Crown and Bridge Lecture 1 Dr.Nibras AL-Kuraine Jacket crown It is a type of crown that is formed by a tooth colored material. It is mainly used as a single unit in the anterior quadrant of the mouth.
Classification of dental cements
Classification of dental cements Type I: Luting agents* that include temporary cements Class 1: powder-liquid -> harden Class 2: paste-paste -> remain soft Type II: Luting agents for permanent applications
What is Cement? History Overview of the Cement Manufacturing Process Brief Overview of Kiln Operations Why Burn Wastes?
What is Cement? History Overview of the Cement Manufacturing Process Brief Overview of Kiln Operations Why Burn Wastes? A hydraulic cement made by finely pulverizing the clinker produced by calcining to
LEBENSLAUF Dent. Dr. ÖZGE ÖZTÜRK
LEBENSLAUF Dent. Dr. ÖZGE ÖZTÜRK 1. EDUCATION AND TRAINING Year Position/Title School/University Field 1987-1994 Student T.E.D. Ankara College, Ankara, TURKEY High School (honour student) 1994-1999 Student
Technique Guide. Norian SRS Fast Set Putty. Calcium phosphate bone void filler.
Technique Guide Norian SRS Fast Set Putty. Calcium phosphate bone void filler. TableofContents Introduction Norian SRS Fast Set Putty 2 Indications and Contraindications 3 Basic Science 4 Surgical Technique
The Surface and Material of Dental Implants
The Surface and Material of Dental Implants Conrado Aparicio, PhD Minnesota Dental Research Center for Biomaterials and Biomechanics Dpt. of Restorative Sciences. School of Dentistry University of Minnesota
Richmond Crown- A Conventional Approach for Restoration of Badly Broken Posterior Teeth
Richmond Crown- A Conventional Approach for Restoration of Badly Broken Posterior Teeth Abhinav Agarwal 1, Manish Chadha 2, D.R.V.Kumar 3, Prakash Somani 4, Preet Jain 5 Abstract: Restoration of badly
Biomaterials in tissue engineering
Biomaterials in tissue engineering S. Swaminathan Director Centre for Nanotechnology & Advanced Biomaterials School of Chemical & Biotechnology SASTRA University Thanjavur 613 401 Tamil Nadu Page 1 of
ALL-CERAMIC DENTAL IMPLANT SOLUTIONS
ALL-CERAMIC DENTAL IMPLANT SOLUTIONS Scientific Evidence Bone-to-implant contact of 78% at 3 months. One piece implant = no prosthetic connections References 1. One-year follow-up of first consecutive
Dr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/
FP7 NMP/INCO Brokerage Event Warsaw, 17-18 September 2009 Dr Marcin Adamiak marcin.adamiak [email protected] http://www.imiib.polsl.pl www.imiib.polsl.pl/ Institute of Engineering Materials and Biomaterials
Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
Mold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
http://eprints.gla.ac.uk/5255/ Deposited on: 8 June 2009
e Talal, A and Tanner, K.E. and Billington, R. and Pearson, G.J. (28) Effect of ultrasound on the setting characteristics of glass ionomer cements studied by Fourier Transform Infrared Spectroscopy. Journal
How To Make An Implant From A Metal That Is Like Bone
Trabecular Metal Technology The Best Thing Next to Bone Trabecular Metal Technology The Best Thing Next to Bone When you need a hip, knee, shoulder or spine implant, you want assurance that your implant
2. PREPARATION OF TEST SPECIMENS
Leaching of Cement Lining in Newly-Laid Water Mains (Part II) Ong Tuan Chin and Dr. Wong Sook Fun School of Civil and Environmental Engineering, Nanyang Technological University, 5 Nanyang Avenue, Singapore
Restoration of a screw retained single tooth restoration in the upper jaw with Thommen Titanium base abutment.
Restoration of a screw retained single tooth restoration in the upper jaw with Thommen Titanium base abutment. Dr. med. dent. David McFadden, Dallas County, USA Initial situation (single X-ray) Tooth 16
Resume. 2000-2001 General Dentist, Mobile Dental Program, Dorchester House Multi-service
Resume Name: Abdulghani I. Mira Address: P.o.Box: 54756 Jeddah 21524 E-Mail: [email protected] [email protected] Education: 1995 B.D.S. Faculty of Dentistry, King Abdulaziz University, Jeddah 1997
Photofunctionalization
Photofunctionalization One and only technology to overcome the biological aging of titanium Scientific brochure of photofunctionalization Volume 1, Issue 1, 2013 published by Global Network for Photofunctionalized
Advances in All Ceramic Restorations. Alaa AlQutub Umm AlQura University, Faculty of Dentistry
Advances in All Ceramic Restorations Alaa AlQutub Umm AlQura University, Faculty of Dentistry Types of materials used in esthetic zone I. Metal ceramic restoration: Metal ceramic alloy features : Produce
SILA Sistema Integrato di Laboratori per l Ambiente. CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa
CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa 0 The Centre for Microscopy and Microanalysis (CM2) is an interdisciplinary service centre, a comprehensive suite
Associate Professor of Operative and Esthetic Dentistry Director of Operative and Esthetic Division. Coordinator of Continuing Dental Education
PERSONAL INFORMATION Hala Ali Maher Mohamed Ragab (961) 1 300110 ext: 2526 [email protected] [email protected] Gender Female Date of birth 07/11/1966 Nationality Egyptian POSITION Associate
Strong bone for beautiful teeth Patient Information I Bone reconstruction with Geistlich Bio-Oss and Geistlich Bio-Gide
Strong bone for beautiful teeth Patient Information I Bone reconstruction with Geistlich Bio-Oss and Geistlich Bio-Gide Contents Smiling is the most beautiful way to show your teeth 3 What are the causes
Like natural teeth. Treatment procedure with dental implants SINGLE TOOTH REPLACEMENT
Like natural teeth Treatment procedure with dental implants SINGLE TOOTH REPLACEMENT Dental implants by Astra Tech like natural teeth Do you suffer from the discomfort of a missing tooth? Oftentimes, missing
h e l p s y o u C O N T R O L
contamination analysis for compound semiconductors ANALYTICAL SERVICES B u r i e d d e f e c t s, E v a n s A n a l y t i c a l g r o u p h e l p s y o u C O N T R O L C O N T A M I N A T I O N Contamination
Biomedical Engineering Graduate Program in METU / ANKARA
Biomedical Engineering Graduate Program in METU / ANKARA Faculty of Engineering Institute of Applied Mathematics Informatics Institute Faculty of Arts and Sciences Electrical and Electronics and Engineering
ADA Standards Committee on Dental Products National Standards Status of Projects. Standard # Title of Standard WG Status Activity
ANSI/ADA 1-2003 (R2013) Alloy for Dental Amalgam 1.2 AS 0 ADA 6-1987 Dental Mercury 1.2 AS 0 ANSI/ADA 15-2008 (R2013) Artificial Teeth for Dental Prostheses 2.11 AP 0 ANSI/ADA 17-1983 (R2014) Denture Base
BIOMECHANICAL ANALYSIS OF NORMAL AND IMPLANTED TOOTH USING BITING FORCE MEASUREMENT
BIOMECHANICAL ANALYSIS OF NORMAL AND IMPLANTED TOOTH USING BITING FORCE MEASUREMENT B K Biswas 1 S Bag 2 & S Pal 3 1. Dept. of Dental Surgery, Associate Professor, KPC Medical College & Hospital, Kolkata,
Thomas J. Webster, Weldon School of Biomedical Engineering and School of Materials Engineering, Purdue University, West Lafayette, IN 47907
Nanotechnology to Benefit Tissue Engineering Thomas J. Webster, Weldon School of Biomedical Engineering and School of Materials Engineering, Purdue University, West Lafayette, IN 47907 Introduction Nanobiotechnology
Implant materials. Learning outcomes. Implant materials in trauma. How to use this handout? Functions of implants. Types of materials
Implant materials How to use this handout? The left column is the information as given during the lecture. The column at the right gives you space to make personal notes. Learning outcomes At the end of
High Performance PSA in Sheet Membrane in Water Protection
High Performance PSA in Sheet Membrane in Water Protection Xia Cao, Senior R&D Chemist, W. R. Grace, Cambridge MA 02140 Jyoti Seth, Strategic Program Leader, W. R. Grace, Cambridge MA 02140 Concrete is
The study of structural and optical properties of TiO 2 :Tb thin films
Optica Applicata, Vol. XXXVII, No. 4, 2007 The study of structural and optical properties of TiO 2 :Tb thin films AGNIESZKA BORKOWSKA, JAROSLAW DOMARADZKI, DANUTA KACZMAREK, DAMIAN WOJCIESZAK Faculty of
What we know: shale gas as a promising global energy resource for the future. What we need to know: the scientific challenges.
Laboratory of Soil Mechanics,Chair Gaz Naturel - Petrosvibri LMS-EPFL Prof. L. Laloui Gas Opportunities, Challenges and Achievements - «EFFICIENCE 21», Automne 2013... Geomechanics: a one-way road toward
SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY
BS 40 M6 MuCis mono SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY LE CE LE type: "expansive binder which allows the production of extremely fluid concrete
Sinterstation. Pro Direct Metal SLM System
Sinterstation Pro Direct Metal SLM System Jim Dier SLS and SLM Systems, Upper Midwest 3D Systems, Inc. 18 July 2008 Introduction Product overview Systems Sinterstation Pro DM100 SLM System Sinterstation
Dental implants and Astra Tech
Background Dental implants and Astra Tech March 2009 1/6 CONTENTS Tooth loss: A common problem... 3 Traditional solutions... 3 Dental implants... 4 Astra Tech Implant System..... 4 Atlantis - patient-specific
chronos BOne VOid Filler Beta-Tricalcium Phosphate (b-tcp) bone graft substitute
chronos BOne VOid Filler Beta-Tricalcium Phosphate (b-tcp) bone graft substitute chronos Bone Void Filler Osteoconductive Resorbable Synthetic chronos Granules and Preforms are synthetic, porous, osteoconductive,
Barrier Coatings: Conversion and Production Status
Transparent SiO 2 Barrier Coatings: Conversion and Production Status E. Finson and J. Felts, Airco Coating Technology, Concord, CA Keywords: Permeation barrier coatings; Reactive evaporation; SiO 2 ABSTRACT
Examination sessions (two) winter session (January/February) summer session (June/July) Courses per years Year I Semester I Semester II crt.
Transilvania University of Braşov, Romania Study program: EGINEERING AND MANAGEMENT OF ADVANCED MATERIALS METALLIC, CERAMIC AND COMPOSITE Faculty MATERIALS SCIENCE and ENGINEERING Study program (Curriculum)
THE INFLUENCE OF COMPRESSIVE CYCLIC LOADING ON THE RETENTION OF CAST CROWN COPINGS CEMENTED TO IMPLANT ABUTMENTS
THE INFLUENCE OF COMPRESSIVE CYCLIC LOADING ON THE RETENTION OF CAST CROWN COPINGS CEMENTED TO IMPLANT ABUTMENTS A thesis submitted in partial fulfillment for the Degree of Doctor of Clinical Dentistry
WATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
Keywords: Planar waveguides, sol-gel technology, transmission electron microscopy
Structural and optical characterisation of planar waveguides obtained via Sol-Gel F. Rey-García, C. Gómez-Reino, M.T. Flores-Arias, G.F. De La Fuente, W. Assenmacher, W. Mader ABSTRACT Planar waveguides
DURABILITY OF MORTAR LININGS IN DUCTILE IRON PIPES Durability of mortar linings
DURABILITY OF MORTAR LININGS IN DUCTILE IRON PIPES Durability of mortar linings I. S. MELAND SINTEF Civil and Environmental Engineering, Cement and Concrete, Trondheim, Norway Durability of Building Materials
Salt Weathering of Masonry Walls The Venice Experience. By M. Collepardi, S. Collepardi and R. Troli
Salt Weathering of Masonry Walls The Venice Experience By M. Collepardi, S. Collepardi and R. Troli Synopsis: All the buildings in Venice insist on foundation immersed in sea water and then are permanently
Taking care of your dental Implants ( By Dr. B. Pulec )
This article is written and presented by Dr. Boris Pulec MDS Dr. Pulec graduated from the University of Toronto and has been practicing privately for over 27 years. He has been a proponent of patient education
Ion Beam Sputtering: Practical Applications to Electron Microscopy
Ion Beam Sputtering: Practical Applications to Electron Microscopy Applications Laboratory Report Introduction Electron microscope specimens, both scanning (SEM) and transmission (TEM), often require a
Choose What Feels Right. Bridge vs. Dental Implant
Choose What Feels Right Bridge vs. Dental Implant THE CHOICE THAT FEELS RIGHT A missing tooth just doesn t feel right. It can be uncomfortable, make it difficult to chew and perhaps worst of all, hold
The importance of selecting the
Erik Swain Contributing Writer FEATURE Choosing a Coating Choosing the right coating or surface modification technique is key for orthopedic implant firms. IonBond s PVD coating machine is used to deposit
AS B E S T O S C O N V E R S I O N P R O C E S S ( AC P )
AS B E S T O S C O N V E R S I O N P R O C E S S ( AC P ) Dipl.-Ing. F.W. Mayer, Dr. H. Kolb, Prof. Dr. A. Mayer, Dipl.-Ing. T. Pollak ARP - Analysing, Recycling, Processing GmbH and Mining University
Fabrication of Bioactive High Porous Hydroxyapatite Ceramics
Fabrication of Bioactive High Porous Hydroxyapatite Ceramics * Fatih Çalışkan, Zafer Tatlı and Ayça Sonkaya Sakarya University, Faculty of Technology, Department of Metallurgical and Materials Engineering,
Metal Injection Molding (MIM) of components made of Titanium and its alloys
Metal Injection Molding (MIM) of components made of Titanium and its alloys 1 Presentation content Introduction to Metal Injection Molding (MIM) Technology - explaination Products - examples Company brief
Strong bone for beautiful teeth Patient Information I Bone reconstruction with Geistlich Bio-Oss and Geistlich Bio-Gide
Strong bone for beautiful teeth Patient Information I Bone reconstruction with Geistlich Bio-Oss and Geistlich Bio-Gide Contents Smiling is the most beautiful way to show your teeth 3 What are the causes
Wax-based binder for low-pressure injection molding and the robust production of ceramic parts
Wax-based binder for low-pressure injection molding and the robust production of ceramic parts J. E. Zorzi a,* C. A. Perottoni b,a, J. A. H. da Jornada c,a a Universidade Federal do Rio Grande do Sul,
Adhesive Solutions. Scotchbond Universal Adhesive. SEM pictures of Scotchbond Universal Adhesive. One bottle for all cases! Total-Etch and Self-Etch
Adhesive Solutions Adhesive SEM pictures of. One bottle for all cases! Total-Etch and Self-Etch One adhesive for Total-Etch and Self-Etch Discover the Universal Bonding Solution. Unleash the power of the
Materials Sciences. Dr.-Ing. Norbert Hort [email protected]. International Masters Programme in Biomedical Engineering
Materials Sciences International Masters Programme in Biomedical Engineering Magnesium Innovations Center (MagIC) GKSS Forschungszentrum Geesthacht GmbH Dr.-Ing. Norbert Hort [email protected] Contents
COATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
Silane Coupling Agents
Silane Coupling Agents Table of Contents Introduction 2-4 Characteristics 5 Amino Functional Silane Coupling Agents 6 Epoxy Functional Silane Coupling Agents 6 Vinyl Functional Silane Coupling Agents 7
The Most Frequently Asked Questions About Dental Implants... A Consumer s Guide to Understanding Implant Treatment
Number 3 $1.25 The Most Frequently Asked Questions About Dental Implants... A Consumer s Guide to Understanding Implant Treatment If you are like most people considering dental implants, you probably have
1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III
1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III 1. Introduction............................. 2. Electrostatic Charging of Samples in Photoemission Experiments............................
Prosthetic treatment planning on the basis of scientific evidence.
Prosthetic treatment planning on the basis of scientific evidence. Pjetursson BE, Lang NP. J Oral Rehabil. 2008 Jan;35 Suppl 1:72-9. Faculty of Odontology, University of Iceland, Reykjavik, Iceland, and
Chemical Engineering - CHEN
Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617
In the Spring of 2010, the American Academy of Cosmetic
Greetings to the members of the American Academy of Cosmetic Dentistry (AACD). As you know, a sisterhood agreement was concluded between the AACD and the Japan Academy of Esthetic Dentistry (JAED) at a
dental fillings facts About the brochure:
dental fillings facts About the brochure: Your dentist is dedicated to protecting and improving oral health while providing safe dental treatment. This fact sheet provides information you need to discuss
Active Nanocomposite Materials
Active Nanocomposite Materials Contact: Prof. Jorma Jokiniemi ([email protected]) The aim of this project was to develop tailored functional nanocomposite materials for industrial applications. The
STEP-BY-STEP INSTRUCTIONS ON THE PROSTHETIC PROCEDURES. Straumann Anatomic IPS e.max Abutment
STEP-BY-STEP INSTRUCTIONS ON THE PROSTHETIC PROCEDURES Straumann Anatomic IPS e.max Abutment The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research
Contact: Steve Hurson VP, R & D Nobel Biocare 22715 Savi Ranch Pkwy Yorba Linda, CA 92887 (714) 282-5072 steve.hurson@nobelbiocare.
Use of CP Titanium and Titanium alloys for Dental Implants Steve Hurson, Nobel Biocare U.S.A. Yorba Linda CA Abstract Professor Per Ingvar Branemark of Sweden published his results on 15 years of research
Silica Over-Saturation, Precipitation, Prevention and Remediation In Hot Water Systems Edited By Dave Peairs, Cal Water, Technical Director
Silica Over-Saturation, Precipitation, Prevention and Remediation In Hot Water Systems Edited By Dave Peairs, Cal Water, Technical Director Background Silica scaling becomes a problem when any hot water
Abutment Solutions For customized implant restorations fabricated with CEREC and inlab. Digital all around.
Abutment Solutions For customized implant restorations fabricated with CEREC and inlab Digital all around. The digital treatment workflow Digital impression taking Coordinated digital workflows in CAD/CAM
1. PECVD in ORGANOSILICON FED PLASMAS
F. FRACASSI Department of Chemistry, University of Bari (Italy) Plasma Solution srl SURFACE MODIFICATION OF POLYMERS AND METALS WITH LOW TEMPERATURE PLASMA OUTLINE METAL TREATMENTS 1 low pressure PECVD
Implants of high-performance ceramic. vk-lange 12.03.2007 14:44 Uhr Seite 1. One-piece precision implant. Made in Germany
OMNIS Implants of high-performance ceramic vk-lange 12.03.2007 14:44 Uhr Seite 1 One-piece precision implant C M Y CM MY CY CMY K Dieter Lange Verkaufsleiter Labor Made in Germany creamed nge 12.03.2007
TIE-31: Mechanical and thermal properties of optical glass
PAGE 1/10 1 Density The density of optical glass varies from 239 for N-BK10 to 603 for SF66 In most cases glasses with higher densities also have higher refractive indices (eg SF type glasses) The density
Multi-walled Carbon Nanotube Reinforced Aluminum Nanocomposites by Cold Kinetic Spraying
Multi-walled Carbon Nanotube Reinforced Aluminum Nanocomposites by Cold Kinetic Spraying SRINIVASA R BAKSHI 1, and ARVIND AGARWAL 2 1,2 Florida International University, Miami, FL 33174, USA. E-mail: [email protected]
Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray
Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray Hannu Teisala a, Mikko Tuominen a, Mikko Aromaa b, Jyrki M. Mäkelä b, Milena Stepien c, Jarkko J. Saarinen c, Martti Toivakka c
Ceramic Based Bio-Medical Implants
98 INTERCERAM 02/2010 R. Sarkar*, G. Banerjee** Ceramic Based Bio-Medical Implants THE AUTHOR ABSTRACT KEYWORDS The corresponding author, Dr Ritwik Sarkar (38), Associate Professor, NIT, Rourkela, India,
Surface Treatment of Titanium
Surface Treatment of Titanium Christiane Jung KKS Ultraschall AG, Steinen SZ The Tribology of Precision Swiss Tribology Meeting SBB Centre Löwenberg in Murten, Switzerland 16. November 2007 1 Outline:
Recent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements
Recent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements Dilip De, Ph.D. Research and Product Engineering Charles Hunter, Ph.D. Research and Product
COMPARATION BETWEEN PIII SUPERFICIAL TREATMENT AND CERAMIC COATING IN CREEP TEST OF Ti-6Al-4V ALLOY
Materials Science Forum Vols. 660-661 (2010) pp 225-228 Online available since 2010/Oct/25 at www.scientific.net (2010) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/msf.660-661.225
Scanning Electron Microscopy Services for Pharmaceutical Manufacturers
Scanning Electron Microscopy Services for Pharmaceutical Manufacturers Author: Gary Brake, Marketing Manager Date: August 1, 2013 Analytical Testing Laboratory www.atl.semtechsolutions.com Scanning Electron
Biomedical Engineer. At a Glance. Job Description. BC Focus Areas. Earnings. Level of Education. Core Tasks. Attributes & Abilities.
Biomedical Engineer At a Glance Biomedical engineers (BMEs) develop instruments, techniques, and devices used by doctors to diagnose and treat people who are sick or hurt. BC Focus Areas Science & Applied
ADA Insurance Codes for Laboratory Procedures:
ADA Insurance Codes for Laboratory Procedures: Inlay/Onlay Restorations D2510 Inlay - metallic - one surface D2520 Inlay - metallic - two surfaces D2530 Inlay - metallic - three or more surfaces D2542
CHEMISTRY AND PHYSICS OF MATERIALS
International Master Programme CHEMISTRY AND PHYSICS OF MATERIALS at the Paris-Lodron University of Salzburg Non-legally binding translation of the description of the Masters Programme https://online.uni-salzburg.at/plus_online/wbmitteilungsblaetter.display?pnr=707293
BNG 331 Cell-Tissue Material Interactions. Biomaterial Surfaces
BNG 331 Cell-Tissue Material Interactions Biomaterial Surfaces Course update Updated syllabus Homework 4 due today LBL 5 Friday Schedule for today: Chapter 8 Biomaterial surface characterization Surface
ENDODONTOLOGY. CALCIUM PHOSPHATE CEMENT: A NEW SAVIOUR FOR FURCATION PERFORATION? - An in-vitro study INTRODUCTION MATERIALS AND METHODS ABSTRACT
CALCIUM PHOSPHATE CEMENT: A NEW SAVIOUR FOR FURCATION PERFORATION? - An in-vitro study SANOOP GEORGE * VASUNDHARA SHIVANNA ** DHANYAKUMAR N. M. *** ABSTRACT This study was conducted to evaluate the sealing
Grade Selection... Coated Grades / CVD... Coated Grades / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics...
Products Grade Selection... Coated / CVD... Coated / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics... Uncoated Cemented Carbides... Ultra fine Grain Cemented Carbides... -2-4 -6-8 -0-2 - -4-5
Straumann Dental Implants Confident smiles
Straumann Dental Implants Confident smiles STRAUMANN DENTAL IMPLANTS - DESIGNED TO LAST A LIFETIME Dental Implants The decision to replace missing teeth with dental implants is an excellent investment
