Tudományos publikációk és hivatkozások jegyzéke

Transcription

1 Horváth László egyetemi tanár Tudományos publikációk és hivatkozások jegyzéke A jegyzék a év szeptember végén frissitve Óbudai Egyetem, Budapest, 2010

2 Tartalom 1 Könyvek és könyvfejezetek 2. Könyvként kiadott gyűjteményben megjelent cikkek 3. Folyóiratcikkek 3.1 Külföldi folyóiratok 3.2 Hazai folyóiratok 3.3 Magyar nyelvű folyóiratok 4. Konferenciák kiadványai 4.1 Világméretű nemzetközi konferenciák 4.2 Regionális nemzetközi konferenciák 4.3. Hazai konferenciák 2

3 Statisztika Darabszám Hivatkozás 1 Könyvek és 4 21 könyvfejezetek 2. Könyvként kiadott gyűjteményben megjelent cikkek 3. Folyóiratcikkek Külföldi folyóiratok Hazai folyóiratok Magyar nyelvű 12 1 folyóiratok 4. Konferenciák kiadványai Világméretű nemzetközi konferenciák 4.2 Egyéb nemzetközi konferenciák 4.3. Hazai konferenciák 17 - Összesen

4 1. Könyvek és könyvfejezetek (B) B1 L. Horváth and I. J. Rudas, Knowledge Technology for Product Modeling, Chapter 5 of the book Knowledge in Context Few Faces of the Knowledge Society, Walters Kluwer, 2010, ISBN , pp B2 L. Horváth, I. J. Rudas, Modeling and Problem Solving Methods for Engineers, ISBN X, Elsevier, Academic Press, New York, etc., 2004, p. 330 B2-c1 (1) R. Andoga, L. Főző, L. Madarász, Small Turbojet Engine MPM 20 Simulations and Modeling, Proc. of the 9th International Symposium of Hungarian Researchers on Computational Intelligence and Informatics, ISBN , Budapest, Hungary, (2008). B2-c2 (2) Andoga, R. Fozo, L. Madarasz, L., Approaches in modeling of a small turbojet engine MPM 20, in Proc. of the 6th International Symposium on Applied Machine Intelligence and Informatics, ISBN , Herlany, Slovakia, , B2-c3 (3) Kovács, G. L., Management and Production Control Issues of Distributed Enterprises, plenary paper, Proc. of the IFIP PROLAMAT 2006 conference: Knowledge Enterprise: Intelligent Strategies in Product Design, Manufacturing and Management, Springer, ISBN , Shanghai, China, 11-20, B2-c4 (4) M. Takács, S. Szénási and Á. Szeghegyi, Fuzzy Logic Control Problems Simulation Based on Parametrizied Operators, in Scientific Bulletin of Politechnica University of Timisoara, ISSN x, Timisoara, Romania, Vol 51(65), No. 1, 2006, B2-c4 (5) L. Madarász, R. Andoga, M. Karas, J. Judicak, Advanced Methods of Measurement and Situational Control of a Small Turbojet Engine, proc. of the 6th International Symposium of Hungarian Researchers on Computational Intelligence, ISBN , Budapest, Hungary, , 2005 B2-c5 (6) Mechanical Engineering-CIME, December 1, 1, 2004 B2-c6 (7) Marius-Lucian Tomescu, Stefan Preitl, Radu-Emil Precup, József K. Tar, Stability Analysis Method for Fuzzy Control Systems Dedicated Controlling Nonlinear Processes, Acta Polytechnica Hungarica Vol. 4, No. 3, pp (2007). B2-c7 (8) Zsuzsa Preitl, Radu-Emil Precup, József K. Tar, Márta Takács, Use of Multiparametric Quadratic Programming in Fuzzy Control Systems, Acta Polytechnica Hungarica Vol. 3, No. 3, pp (2006). B2-c8 (9) Claudiu Pozna, Radu-Emil Precup, Modeling derived from Bayesian filtering: analysis of estimation process, in Proc. of the IEEE 13th international conference on Intelligent Engineering Systems, ISBN: , Barbados, 2009, pp B2-c9 (10) Radu-Emil Precup, Marius L. Tomescu, Stefan Preitl, Emil M. Petriu, Fuzzy Logic-based Stabilization of Nonlinear Time-Varying Systems, International Journal of Artificial Intelligence, Vol. 3, No. A09, pp (2009) B2-c10 (11) Claudiu Pozna, Radu-Emil Precup, József K. Tar, Igor Škrjanc, and Stefan Preitl, New results in modelling derived from Bayesian filtering, Knowledge-Based Systems, Vol. 23, Issue 2, pp

5 B2-c11 (12) Radu-Emil Precup, Mircea-Bogdan Rădac, Stefan Preitl, Emil M. Petriu and Claudia-Adina Dragos, Iterative Feedback Tuning in Linear and Fuzzy Control Systems, in book Towards Intelligent Engineering and Information Technology, Springer Berlin / Heidelberg, ISBN , pp , (2009) B2-c12 (13) Stefan Preitl, Radu-Emil Precup, Marius-Lucian Tomescu, Mircea-Bogdan Rădac, Emil M. Petriu and Claudia-Adina Dragos, Model-Based Design Issues in Fuzzy Logic Control, in book Towards Intelligent Engineering and Information Technology, Springer Berlin / Heidelberg, ISBN , pp , (2009) B2-c13 (14) Claudiu Pozna, Radu-Emil Precup, Stefan Preitl, Fritz Troester and József K. Tar, Points of View on Building an Intelligent Robot, in book Towards Intelligent Engineering and Information Technology, Springer Berlin / Heidelberg, ISBN , pp , (2009) B2-c14 (183) L. Madarász, R. Andoga, L. Főző, Turbojet Engines Progressive Methods of Modeling, Acta Mechanica Slovaca, ISSN , Vol. 13, No. 4, pp (2009) B2-c15 (185) Claudia-Adina Dragos, Stefan Preitl, Radu-Emil Precup, Raul-Gherasim Bulzan, Claudiu Pozna, and Jozsef K. Tar, Takagi-Sugeno Fuzzy Controller for a Magnetic Levitation System Laboratory Equipment, in proc. of the IEEE 8th International Conference on Computational Cybernetics and 9th International Conference on Technical Informatics, Timisora, Romania, 2010, IEEE Catalog Number: CFP10575-CDR, ISBN: , pp B2-c15 (186) Sandor Biro, Radu-Emil Precup and Doru Todinca, Double Inverted Pendulum Control by Linear Quadratic Regulator and Reinforcement Learning, in proc. of the IEEE 8th International Conference on Computational Cybernetics and 9th International Conference on Technical Informatics, Timisora, Romania, 2010, IEEE Catalog Number: CFP10575-CDR, ISBN: , pp B2-c16 (187) Adrian-Sebastian Paul, Radu-Emil Precup, Claudiu Pozna, and Radu-Codruţ David, ndsp: A Platform for Audiophile Software Audio Processing, in proc. of the IEEE 8th International Conference on Computational Cybernetics and 9th International Conference on Technical Informatics, Timisora, Romania, 2010, IEEE Catalog Number: CFP10575-CDR, ISBN: , pp B2-c17 (188) C. Pozna, V. Prahovean and R.-E. Precup, A New Pattern of Knowledge Based on Experimenting the Causality Relation, in Proc. of the IEEE 14th International Conference on Intelligent Engineering Systems, Las Palmas of Gran Canaria, 2010, IEEE Catalog Number: FP10IES-CDR, ISBN: , pp B2-c18 (189) Claudiu Pozna, Radu-Emil Precup, Nicusor Minculete, Csaba Antonya and Claudia-Adina Dragos, Properties of Classes, Subclasses and Objects in an Abstraction Model, in proc. of the 19th International Workshop on Robotics in Alpe-Adria-Danube Region, 2010, IEEE Catalog Number: CFP1075J-CDR, ISBN: , Budapest, Hungary, pp B2-c18 (190) C.-A. Dragos, S. Preitl, R.-E. Precup, D. Pirlea, C.-S. Nes, E. M. Petriu and C. Pozna, Modeling of a Vehicle with Continuously Variable Transmission, in proc. of the 19th International Workshop on Robotics in Alpe-Adria-Danube Region, 2010, IEEE Catalog Number: CFP1075J-CDR, ISBN: , Budapest, Hungary, pp B3 L. Horváth, I. J. Rudas, Modeling of Manufacturing Processes in Simultaneous Engineering Using Collaborative Methods and Tools, Simultaneous Engineering: Methodologies and Applications (Automation and Production Systems), Ed. U. Roy, Gordon and Breach Science Publisher, ISBN , New York,

6 B4 Göndöcs B., Horváth L., Zsuppán I., A szerelés gépei, Műszaki Könyvkiadó, Budapest, 1980, 288 o 6

7 2. Könyvként kiadott gyűjteményben megjelent cikkek (BC) BP1 L. Horváth, Restricting Factors at Modification of Parameters of Associative Engineering Objects, In book Intelligent Engineering Systems and Computational Cybernetics, Springer-Verlag, Berlin, Heidelberg, ISBN: , 2009, pp BP2 L. Horváth, Imre J. Rudas Engineering Objective Driven Product Lifecycle Management with Enhanced Human Control, In book Towards Intelligent Engineering and Information Technology, in Series: Studies in Computational Intelligence, Vol. 243, ISBN: , Library of Congress: , Springer-Verlag, Berlin, Heidelberg, 2009, pp BP3 L. Horváth and I. J. Rudas, Integrated Intelligent Methods for Globalized Engineering, Intelligent Systems at the Service of Mankind Vol. II, ISBN , Ubooks, Germany, , (2005) BP4 L. Horváth and I. J. Rudas, Application of Product Model in Internet Based Robot Con-trol, Intelligent Systems at the Service of Mankind, Volume 1, , (2004) BP5 L. Horváth and I. J. Rudas, Intelligent Engineering Modeling by Active Models, Intelli-gent Systems at the Service of Mankind, Volume 1, , (2004) BP5-c1 (15). L. Madarász, R. Andoga, M. Karas and J. Judicak, Advanced Methods of Measurement and Situational Control of a Small Turbojet Engine, Proc. of the 6th International Symposium of Hungarian Researchers on Computational Intelligence, ISBN , Budapest, Hungary, (2005). BP5-c2 (16). R. Andoga, L. Főző, L. Madarász, Small Turbojet Engine MPM 20 Simulations and Modeling, Proc. of the 9th International Symposium of Hungarian Researchers on Computational Intelligence and Informatics, ISBN , Budapest, Hungary, (2008). BP5-c3 (17). R Andoga, L Fozo, L Madarasz, Approaches in modeling of a small turbojet en-gine MPM 20, Proc of the 6th International Symposium on Applied Machine Intel-ligence and Informatics, Herlany, Slovakia, ISBN: , (2008). BP5-c4 (184) L. Madarász, R. Andoga, L. Főző, Turbojet Engines Progressive Methods of Modeling, Acta Mechanica Slovaca, ISSN , Vol. 13, No. 4, pp (2009) BP6 L. Horváth, I. J. Rudas, J. F. Bitó, A. Szakal, Feature Driven Associative Part and Machining Process Models, Knowledge and Technology Integration in Production and Services, Kluver Academic Publishers, Boston, ISBN , 11-18, (2002) 7

8 BP7 L. Horváth, I. J. Rudas, C. Couto, Integrationration of Human Intent Model Descriptions in Product Models, Digital Enterprise - New Challenges Life-Cycle Approach in Management and Production, ISBN: , Kluwer Academic Publishers, 1-12, (2001) BP7-c1 (18). S. Preitl, R-E. Precup, J. Fodor, B. Bede, On the Use of Iterative Fedback Tuning Algorithms in Fuzzy Control System Design, Proc. of the 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, Romania, ISBN , 46-58, (2006). BP7-c2 (19). S. Preitl, R-E. Precup, J. Fodor, B. Bede, Iterative Fedback in Fuzzy Control Systems. Theory and Applications, Acta Polytechnica Hungarica, ISSN , Budapest, Hungary, No. 3, 81-96, (2006). BP7-c3 (20). Zsuzsa Preitl, Radu-Emil Precup, József K. Tar, Márta Takács, Use of Multiparametric Quadratic Programming in Fuzzy Control Systems, Acta Polytechnica Hungarica Vol. 3, No. 3, pp (2006). BP8 I. J. Rudas and L. Horváth, "Teaching Virtual Technologies in Virtual University", in Bogazici University Publication No. 680, ISBN , 2001, Istanbul: Bogazici University, , (2001) BP9 L. Horváth, I. J. Rudas and O. Kaynak, Virtual manufacturing Oriented Generic Manufacturing Process model, Recent Advances in Mechatronics, Springer-Verlag, Singapore, , (1999) BP9-c1 (21). Y.A.H. El Hini, Planning of Part Manufacturing Process using Generic Model, Proc, of the 2001 IEEE International Conference on Intelligent Engineering Systems, Helsinki, Finland, , (2001) BP9-c2 (22). S. Preitl, R-E. Precup, J. Fodor, B. Bede, On the Use of Iterative Fedback Tuning Algorithms in Fuzzy Control System Design, Proc. of the 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, Romania, ISBN , 46-58, (2006) BP9-c3 (23). S. Preitl, R-E. Precup, J. Fodor, B. Bede, Iterative Fedback in Fuzzy Control Systems. Theory and Applications, Acta Polytechnica Hungarica, ISSN , Budapest, Hungary, No. 3, 81-96, (2006), BP10 L. Horváth, I. J. Rudas, Manufacturing Process Modeling Method for CAD/CAM and Flexible Manufacturing Systems, in Re-engineering for Sustainable Industrial Production, London: Chapman & Hill, , (1997) BP10-c1 (24). Y.A.H. El Hini, Planning of Part Manufacturing Process using Generic Model, Proceedings of the 2001 IEEE International Conference on Intelligent Engineering Systems, Helsinki, Finland, , (2001) BP11 L. Horváth, I. J. Rudas, L. M. Camarinha-Matos, Structured Model Representation of Manufacturing Processes Using Petri Nets and Knowledge Based Tools, Balanced Automation Systems II. Implementation Challenges for Anthropocentric Manufacturing, Chapman & Hill, , (1996) 8

9 BP12 L. Horváth, I. Rudas, Possibilities of Application of Machine Learning in Manufacturing Process Planning, IFIP Transactions B-11 (Knowledge Based Hybrid Systems), Elsevier Science Publishers B.V., Amsterdam, , (1993) BP13 L. Horváth, I. J. Rudas, Manufacturing Process Planning Using Object Oriented Petri Nets Supported by Entropy Based Fuzzy Reasoning. Integrated Systems Engineering, PERGAMON, Oxford, (1994) BP13-c1 (25). Holecko, P., Madarasz, L., Technological Optimatization by means of Graphical Methods, Proc. of the 12th International Conference on Systems Science, Vol. II., Wroclaw, , (1995) BP13-c2 (26). Ladislav Madarasz: Metodika situacného riadnia a jej aplikácie, University Press Elfa, Kosice, 1-6, (1996) 9

10 3. Folyóiratcikkek 3.1 Külföldi folyóiratokban megjelent cikkek (A) A1 László Horváth, Imre J. Rudas, János F. Bitó, Contextual connections among objectives and objects at product model definition, Acta Electrotechnica et Informatica, ISSN , Vol. 10, No. 1, pp (2010). A2 László Horváth and Imre J. Rudas, Handling Complexity and Content Related Problems at Product Modeling, In Scientific Bulletin of Politehnica University of Timisoara, Transactions on Automatic Control and Computer Science, ISSN X, Vol. 55(69), No. 1, pp (2010). A3 László Horváth and Imre J. Rudas, Flexible Product Definition in Virtual Space, In Scientific Bulletin of Politehnica University of Timisoara, Transactions on Automatic Control and Computer Science, ISSN X, Vol. 55(69), No. 2, pp (2010). A4 László Horváth and Imre J. Rudas, Human Intent Representation in Knowledge Intensive Product Model, in Journal of Computers, ISSN: X, Vol. 4 No. 9, pp , (2009). A5 László Horváth and Imre J. Rudas, Product Definition in Virtual Space Using Background information at Description of Engineering Objects, in WSEAS Transactions on Systems and Control, ISSN ,Volume 3, Issue 9, September, pp (2008) A6 László Horváth, A New Method for Enhanced Information Content in Product Model, in WSEAS Transactions on Information Science and Applications, ISSN , Vol. 5 No. 3, pp (2008) A7 László Horváth and Imre J. Rudas, Description and Integration of Engineering Objects in Models for Lifecycle Engineering of Products, In Scientific Bulletin of Politehnica University of Timisoara, Transactions on Automatic Control and Computer Science, ISSN X, Vol. 53, No. 4, pp (2008). A8 L. Horváth, Supporting Lifecycle Management of Product Data by Organized Descriptions and Behavior Definitions of Engineering Objects, in Journal of Advanced Computational Intelligene and Intelligent Informatics, Tokyo, ISSN: , Vol. 9. No. 11, (2007). A9 L. Horváth, I. J. Rudas, Intelligent Human-Computer Communication of Engineers at Extended Companies, Journal of Advanced Computational Intelligence and Intelligent Informatics, Tokyo, 10(4), (2006) 10

11 A10 I. J. Rudas, L. Horváth, Emphases on Human Intent and Knowledge in Management of Changes at Modeling of Products, WSEAS Transactions on Information Science and Applications, ISSN , 3(9), (2006) A11 L. Horváth, I. J. Rudas, Change management in Integrated Modeling of Products for High Level of Information Integrity, Scientific Bulletin of Politechnica University of Timisoara, ISSN x, Timisoara, Romania, 51(1), 5-10, 2006 A12 L. Horváth, I. J. Rudas, Course Modeling for Student Profile Based Flexible Higher Education on the Internet, in Journal of Universal Computer Science, (IF= 0,337), 12(9), (2006) A12-c1 (27). J. Gáti et al.,, Intelligent Modeling Method for Development of Shape Cen-tered Products in Collaborative Engineering, in proc. of the 5th Slovakian-Hungarian Joint Symposium on Applied Machine Intelligence, Poprad, Slova-kia ISBN , 2007, (A course p 470, A well-organized, p 471) A12-c2 (28). R.-E. Precup, et al., Object Description Based Processes for Higher Education in Global Computer Networks, in proc. Of the 4th Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, SACI 2007, ISBN , 2004, (Authors of p 153) A12-c3 (29). Gati, J. Kartyas, G., Recent Development in Virtual Higher Education Towards Advanced and Proven Information Technology, 5th International Symposium on Intelligent Systems and Informatics, ISBN , (2007) A12-c4 (30). Domenico Rosaci and Giuseppe M.L. Sarné, Efficient Personalization of E-Learning Activities using a Multi-Device Decentralized Rrecommender System, Computational Intelligence, Vol. 26, Issue 2, pp (2010) A13 L. Horváth, I. J. Rudas, Intelligent Human-Computer Communication of Engineers at Extended Companies, Journal of Advanced Computational Intelligence and Intelligent Informatics, 10(4), (2006) A14 L. Horváth, I. J. Rudas, Adaptive Virtual Higher Education Space for Engineering Modeling, WSEAS Transactions on Advances in Engineering Education, 3(2), (2006) A14-c1 (31). S. Preitl, R-E. Precup, J. Gati, Gy. Kartyas, S. Szénási, Enhanced Mixed Campus and Distance Higher Education, Proc. of the 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, Romania, ISBN , , (2006) A14-c2 (32). J. Gáti et al.,, Intelligent Modeling Method for Development of Shape Cen-tered Products in Collaborative Engineering, in proc. of the 5th Slovakian-Hungarian Joint Symposium on Applied Machine Intelligence, Poprad, Slova-kia ISBN , 2007, (In p 470, For the purposes p 472) A14-c3 (33). R.-E. Precup, et al., Object Description Based Processes for Higher Education in Global Computer Networks, in proc. of the 4th Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, SACI 2007, ISBN , 2004, (The characteristics of p 155) 11

12 A14-c4 (34). Gy. Kártyás, J. Gáti, Important Issues and Methodological Elements in Virtual Classrooms, Proc. of the 4th Serbian-Hungarian Joint Symposium on Intelligent Systems, Subotica, Serbia, ISBN , (2006) A15 L. Horváth, I. J. Rudas, Human Intent Description in Environment Adaptive Product Model Objects, Journal of Advanced Computational Intelligene and Intelligent Informatics, Tokyo, 9(4), , (2005) A15 c1 (35). M. Takács, Á. Szeghegyi, C. Pozna, Quick Comparison of the Efficiency of Fuzzy Operatios Used in FLC, Proc of the 4th Serbian-Hungarian Joint Symposium on Intelligent Systems, Subotica, Serbia, ISBN , (2006). A15 c2 (36). M. Takács, Uninorm-based models for FLC systems, Journal of Intelligent and Fuzzy Systems ISSN , 19(1), (2008). A16 L. Horváth, I. J. Rudas, Adaptive Modeling for Robot Systems Based on Behaviors and Feature Driven Shape Descriptions, WSEAS Transactions on Information Science and Applications, ISSN , 2(11), , (2005) A17 L. Horváth, I. J. Rudas, J. F. Bitó, G. Hancke, Intelligent Computing for the Management of Changes in Industrial Engineering Modeling Processes, Computing and Informatics, (IF=0,091) 24(1), (2005) A18 L. Horváth, I. J. Rudas, Possibilities for Application of Associative Objects with Builtin Intelligence in Engineering Modeling, Journal of Advanced Computational Intelligence and Intelligent Informatics, Tokyo, 8(5), (2004). A19 I. J. Rudas, L. Horváth, Integrated Modeling of Parts and their manufacturing Process by Associative Features, WSEAS Transactions on Systems, 3(5), (2004) A20 L. Horváth, I. J. Rudas, Modeling Course for Virtual University by Features, in Acta Polytechnica Hungarica, ISSN , Budapest, Hungary,, 1(1), (2004) L. Madarász, L. Főző, R. Andoga, B. Bucko, Základy Automackého Riadenia, Elfa, Kosice, 2010, ISBN A21 I. J. Rudas, L. Horváth, Course Model Based Distance Higher Education of Engineering Modeling, WSEAS Transactions on Advances in Engineering Education, ISSN , 1(1), (2004) A21-c1 (37). Gy. Kártyás, J. Gáti, Important Issues and Methodological Elements in Virtual Classrooms, Proc. of the 4th Serbian-Hungarian Joint Symposium on Intelligent Systems, Subotica, Serbia, ISBN , pp (2006) A21-c2 (38). Gy. Kártyás, Structure and connections of course model entities in virtual higher education, WSEAS Transactions on Advances in Engineering Education, ISSN , 3(2), (2006) A21-c3 (39). S. Preitl, J. Gáti, Gy. Kártyás, A Practice Oriented Approach to Intelligent Computing Assisted Distance Education for Engineering, Proc of the 10th International Conference on Intelligent Engineering Systems, London, United Kingdom, ISBN , , (2006). 12

13 A21-c4 (40). Gy. Kártyás, Structure and connections of course model entities in virtual higher education, WSEAS Transactions on Advances in Engineering Education, ISSN , 3(2), (2006) A21-c5 (41). S. Preitl, R-E. Precup, J. Gáti, Gy. Kártyás, S. Szénási, Enhanced Mixed Campus and Distance Higher Education, Proc. of the 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, Romania, ISBN , (2006) A21-c6 (42). Gáti, Gy. Kártyás, Implementation of Course Model Driven Virtual Classroom in Higher Education Practice, Journal of Advanced Computational Intelligence and Intelligent Informatics, Tokyo, 10(6), (2006). A21-c7 (43). Gy. Kártyás, J. Gáti, Model Based Distance Learning on the Internet, Proc. of the IEEE International Conference on Computational Cybernetics, ISBN , Mauritius, (2005) A21-c8 (44). J. Gáti and Gy. Kártyás, Evaluation of Course Model for Implementation of Virtual Classroom in Higher Education Practice, Proc. of the 9th IEEE International Conference on Intelligent Engineering Systems, ISBN , Mediterranean Sea, (2005) A21-c9 (45). J. Gáti, Gy. Kártyás, Student Profile Based Virtual Classroom, Proc. of the 3th Serbian-Hungarian Joint Symposium on Intelligent Systems, Subotica, Serbia-Montenegro, ISBN , (2004) A21-c10 (46). J. Gáti, Gy. Kártyás, About Developing Curriculum Driven Modeling of Degree Program Content, Proc. of the 4th Slovakian-Hungarian Joint Symposium on Applied Machine Intelligence, Herlany, Slovakia, ISBN , (2005) A21-c11 (47). Gy. Kártyás, Virtual Teaching Procedures on the Internet, Proc. of the 1st WSEAS / IASME Int. Conf. on Educational Technologies, Tenerife, Canary Islands, Spain, ISBN 96` , (2005) A21-c12 (48). J. Gáti et al.,, Intelligent Modeling Method for Development of Shape Cen-tered Products in Collaborative Engineering, in proc. of the 5th Slovakian-Hungarian Joint Symposium on Applied Machine Intelligence, Poprad, Slova-kia ISBN , 2007, (In p 470) A21-c13 (49). R.-E. Precup, et al., Object Description Based Processes for Higher Education in Global Computer Networks, in proc. of the 4th Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, SACI 2007, ISBN , 2004, (Course modelling p 153) A21-c14 (50). Gati, J. Kartyas, G., Recent Development in Virtual Higher Education Towards Advanced and Proven Information Technology, 5th International Symposium on Intelligent Systems and Informatics, ISBN: ISBN , (2007) A21-c15 (51). Gati, J. Kartyas, G., Process Oriented and Model-Supported Teaching System in the Cyberspace, International Symposium on Logistics and Industrial Informatics, Wildau, Germany, ISBN: , (2007) A21-c16 (52). Gati, J. Kartyas, G., Course description and handling procedures to fulfill practical demands of field higher education, 6th International Symposium on Applied Machine Intelligence and Informatics, Herlany, Slowakia, ISBN: , (2008) 13

14 A21 c17 (53). J. Gáti and Gy. Kártyás, Bridging Distances by Giving Actual Content in Flexible Teaching Programs, Proc of the IEEE 6th International Conference on Computational Cybernetics, ICCC 2008, Stara Lesná, Slovakia, ISBN , (2008). A22 L. Horváth, I. J. Rudas, S. G. Tzafestas, Relating Shape and Robot Process Model Features, International Journal of Mechanics and Control, ISSN , 4(2), (2003) A23 L. Horváth, I. J. Rudas Virtual technology based associative integration of modeling of mechanical parts, Journal of Advanced Computational Intelligence, 5(5), (2001). A24 L. Horváth, I. J. Rudas, Emerging Intelligent Technologies in Computer Aided Engineering, Journal of Advanced Computational Intelligence, 4(4), , (2000) A25 L. Horváth, I. J. Rudas, Intelligent Computer Methods for Modeling of Manufacturing Processes and Human Intent, Journal of Advanced Computational Intelligence, 20(3), , (1998) A26 I. J. Rudas, L. Horváth, Modeling of Manufacturing Processes Using Petri Net Representation, Engineering Applications of Artificial Intelligence, (IF= 0,709), 10(3), (1997). A26-c1 (54). Vernez, D, Buchs, D, Pierrehumbert, Perspectives in the use of coloured Petri nets for risk analysis and accident modelling, Safety Science 41(5), , (2003) A26-c2 (55). Xuan F. Zha, Samuel Y.E. Lim, Wen F. Lu1, A Knowledge Multi-Agent System for Cooperative/Collaborative Assembly Modeling and Process Planning, in Journal of Integrated Design and Process Science, ISSN , 7(1), , (2003) A26-c3 (56). Hang-Wai Law, Hon-Yuen Tam, Object-oriented analysis and design of com-puter aided process planning systems, International Journal of Computer Integrated Manufacturing, 13(1), 40 49, (2000) A26-c4 (57). A. Besrour, D. Buchs, Man-Machine Interaction Model for Occupational Risk Modelling, Proceedings of the 2002 IEEE International Conference on Systems, Man and Cybernetics, Hammamet, Tunisia, Volume 4, ISBN: , 1-6 (2002) A26-c5 (58). Li, J., Subramanian, S., Swisher, S., Yip-Hoi, D., Information modeling for integrated product design, process planning and system design for powertrain machining, Proceedings of the ASME Design Engineering Technical Conference 2003, 1A, (2003) A26-c6 (59). X.F. Zha: A knowledge intensive multi-agent framework for cooperative/collaborative design modeling and decision support of assemblies, Knowledge Based Systems, 15(8), , 2002 A26-c7 (60). Koga, T., Aoyama, K., An integrated model of product, production process and quality information for failure prediction, Proc. of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, (2005) A26-c8 (61). S.S. Shivathaya, X.D. Fang, Fuzzy-logic-based ranking of steel grades generated by material design KBS., Eng. Application of Artificial Intelligence 12(4), (1999) 14

15 A26-c9 (62). H. Haleh, K. Nezu, A model for selecting a CIFMS design method, Journal of Manufacturing Technology Management, Emerald Group Publishing Limited, 16(5), , May 2005 A26-c10 (63). T. Koga, K. Aoyama, Quality Management System by Causal Chain Network based on Failure Propagation Model in Production, University of Tokyo, pp 1-12 A26-c11 (64). Q. Xianshen, A Method for Relation-Based Modelling of Manufacturing System, Journal of Northwestern Polytechnical University, 18(3), (2000) A26-c12 (65). L Zhang, X Zhou, A new methodology for designing collaborative information system in a virtual team: A case study, in proc of the IEEE International Conference on Service Operations and Logistics, and Informatics, ISBN: , 2008, Beijing, China, pp A26-c13 (66). J Sprenger, J Jung, Enterprise Modelling in the Context of Manufacturing, ICB Research Report, Institut für Informatik und Wirtschaftsinformatik (ICB), Universität Duisburg-Essen A26-c14 (67). Roman Stryczek, Petri Net-Based Knowledge Acquisition Framework for CAPP, Advances in Manufacturing Science and Technology Vol. 32, No. 2, pp , 2008 A26-c15 (68). Suyeon Kim, Euiho Suh, Hyunseok Hwang, (2003) "Building the knowledge map: an industrial case study", Journal of Knowledge Management, Vol. 7 Iss: 2, pp A27 L. Horváth, I. J. Rudas, J. S. Török, Á. Szeghegyi, Application of Novel Knowledge Based Paradigms in Computer Aided Manufacturing Process Modeling. Journal Zbornik Radova. Uniersity of Zagreb. 20(1), ,

16 3.2 Hazai folyóiratokban megjelent angol nyelvű cikkek (AD) AD1 L. Horváth, New Design Objective and Human Intent Based Management of Changes for Product Modeling, in Acta Polytechnica Hungarica, ISSN , Budapest, Hungary, Volume 4, No. 1, 2007, pp AD2 L. Horváth, I. J. Rudas, S. Vaivoda and Zs. Preitl, Virtual Space with Enhanced Communication and Knowledge Capabilities, in Acta Polytechnica Hungarica, ISSN , Budapest, Hungary, Volume 4, No. 3, 2007, pp AD2-c1 (69). Alok Mishra, Deepti Mishra, Customer Relationship Management:Implementation Process Perspective, Acta Polytechnica Hungarica, ISSN , Vol. 6, No. 4, pp , (2009) AD3 L. Horváth and I. J. Rudas, Behavior and Design Intent Based Product Modeling, in Acta Polytechnica Hungarica, ISSN , Budapest, Hungary, 1(2), 17-34, (2004) AD3-c1 (70). J.-Y. Jian, T. Matsuka, J. V. Nickerson, Recognizing Deception in Trajectories, Howe School of Technology Management, Center for Technology Management Research, Working paper AD4 L. Horváth, I. Rudas, S. Tzafestas, G. P. Hancke, Human-Computer Interaction in Product Modeling, Gépgyártástechnológia, 34(9), (1999).. 16

17 3.3 Magyar nyelvű folyóiratokban megjelent cikkek (AH) AH1 Horváth L., Oktatás, kutatás és fejlesztés az ipar számára a Bánki Donát Műszaki Főiskolán, Északkelet-Magyarország, ISSN , 1999, 1. sz. pp AH2 Horváth L., Sárközi Cs. and Varga T., Technológia tervezése modellező eszközökkel multi-média munkaállomásokon Gépgyártástechnológia, 35(11-12), (1995) AH3 Horváth L., Rudas I., Technológiai folyamatok ismeretalapú modellezése kiterjesztett Petri hálókkal. Gépgyártástechnológia, 35(11-12), (1995) AH4 Horváth L., Varga, T., Fejlett mérnöki módszerek a gépészeti tervezésben, Gép, 39(9), (1997) AH5 Horváth, L. and Szabóné, V. K., A GLEDA rendszer továbbfejlesztése. Gépgyártástechnológia, 29(10-11), , (1989) AH6 Horváth. L, Szabóné, V. K., A GLEDA rendszer IBM PC XT/AT számítógépeken, Korszerű Technológiák,. (5), 37-43, AH7 Horváth. L, - Szabóné, V. K., A GLEDA rendszer továbbfejlesztése, Korszerű Technológi-ák, (5), (1987) AH8 Horváth, L., Szabóné, V. K., Forgácsolt alkatrészek technológiai folyamatának a tervezése a GLEDA rendszerrel, Korszerű Technológiák, (6), (1986) AH9 Horváth L. and Szabóné, V. K., Forgácsolt alkatrészek technológiai folyamatának párbeszédes tervezése a GLEDA programcsomaggal, Gépgyártástechnológia, 26(1), (1986) AH10 Horváth, L. and Szabóné, V. K., A GLEDA mikroszámítógépes műveleti sorrendtervező rend-szer, Gépgyártástechnológia, 23(10), (1986) AH10-c1 (71). Horváth Mátyás, Alkatrészgyártási folyamatok automatizált tervezése, MTA SZTAKI kiadványa, ISBN AH11 Horváth, L., Lukács, L., Szabóné, V. K., Integrált gyártórendszer műveleti sorrendtervezése, Automatizálás, (5), (1984) AH12 Szabó, A. - Horváth, L., Nagy, S., A GLEDA mikroszámítógépes rendszer forgácsolt alkatré-szek műveleti sorrendtervezéséhez, Korszerű Technológiák, (6) (1983) 17

18 4. Konferenciák kiadványai 4.1 Világméretű nemzetközi konferenciák (CV) CWP1 L. Horváth and I. J. Rudas, Possibilities for intelligent automation in product definition, in proc of the World Automation Congress, Kobe, Japan, 2010, TSI Press, pp CW1 László Horváth, I. J. Rudas, Filling the Gap between Human Thinking and Model Object Generation at Product Definition in Modeling Systems, in Proc. of the IEEE- ICIT 2010 International Conference on Industrial Technology, Viña del Mar, Chile, IEEE Catalog Number: CFP10CIT-USB, ISBN: , Library of Congress: , pp CW2 László Horváth, Imre. J. Rudas, Gerhard P. Hancke, Gábor Szabó, Communication between Engineers using Content Based Object Model, in proc of the IEEE African Winter School on Information Theory and Communications, AWSITC 2010, ISBN: , Mopani Camp, Kruger National Park, South Africa, 2010, pp. 17. CW3 László Horváth, Imre J. Rudas, Processes in Virtual Engineering Spaces, in proc. of the 2009 IEEE International Conference on Systems, Man, and Cybernetics, San Antonio, Texas, USA, ISBN: , pp CW4 László Horváth, Imre J. Rudas, Processes for Improved Human Control over Definition of Product Models, in Proc. of The 35th Annual Conference of the IEEE Industrial Electronics Society, Porto, Portugal, 2009, pp CW5 L. Horváth and I. J. Rudas, Human-Computer Communication Based Enhanced Decision Assistance in Lifecycle Management of Product Information, in Proc of the World Automation Congress, TSI Press, San Antonio, Texas, USA, IEEE Catalog Number: EX2476, 2008, pp CW6 L. Horváth and I. J. Rudas, Bringing up Product Model to Thinking of Engineer, in proc. of the 2008 IEEE International Conference on Systems, Man, and Cybernetics, Singapore, IEEE Catalog Number: CFP08SMC-USB, ISBN: , Library of Congress: , 2008, CW7 L. Horváth, I. J. Rudas, Nicola Belfiore, Product Information with Enhanced Background Description for Improved Revision of Decisions, in Proc. Of the The 34th Annual Conference of the IEEE Industrial Electronics Society, Orlando, Florida, USA, IEEE Catalog Number CFP08IEC-CDR, ISBN , ISSN: X, 2008, pp., CW8 L. Horváth, I. J. Rudas, New Approach to Knowledge Intensive Product Modeling in PLM Systems, In Proc. of the 2007 IEEE International Conference on Systems, Man, and Cybernetics, SMC2007, ISBN: , IEEE Catalog Number: 07CH37878C, Montreal, Quebec, Canada, pp:

19 CW9 I. J. Rudas, L. Horváth, Process Oriented Engineering Using Highly Integrated Adaptive Computer Descriptions, Proc. of the 32 th Annual Conference of the IEEE Industrial Electronics Society, IECON 2006, Paris, France, (2006) CW10 L. Horváth, I. J. Rudas, Associativity, Adaptivity and Behavior Aspects in Modeling for Manufacturing Related Robot Systems, Proc. of the 2005 IEEE International Conference on Robotics & Automation, Barcelona, Spain, ISBN: , (2005) C_11_03_03 Fei Xiao; Zhenyu Jian, Weihua Zhang, Tailan Wang, Donghui Wang, Min Chen, " An integrated data model and its application for missile design based on hypergraph," in proc of the International Conference on Computers & Industrial Engineering, Troyes, , 2009, pp CW11 L. Horváth, I. J. Rudas, Virtual Intelligent Space for Engineers, Proc. of the 31 th Annual Conference of the IEEE Industrial Electronics Society, Raleigh, North Carolina, USA, (2005) CW12 L. Horváth, I. J. Rudas, Intelligent Shape Centered Models, Proc. of the 2005 IEEE International Conference on Systems, Man & Cybernetics, The Big Island, Hawaii, USA, ISBN X, (2005) CW13 L. Horváth, I. J. Rudas, J. F. Bitó, A. Szakál, Adaptive Model Objects for Robot Related Applications of Product Models, Proc. of the 2004 IEEE International Conference on Robotics & Automation, ICRA 2004, New Orleans, LA, USA, (2004) CW13-c1 (72). S. Preitl, R-E. Precup, J. Fodor, B. Bede, On the Use of Iterative Fedback Tuning Algorithms in Fuzzy Control System Design, Proc. of the 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, Romania, ISBN , 46-58, (2006) CW13-c2 (73). S. Preitl, R-E. Precup, J. Fodor, B. Bede, Iterative Fedback in Fuzzy Control Systems. Theory and Applications, Acta Polytechnica Hungarica, ISSN , Budapest, Hungary, 3(3) (2006) CW14 L. Horváth, I. J. Rudas, G. Hancke, A Szakál, Integrated Environment-adaptive Virtual Model Objects for Product Modeling, Proc. of the 2003 IEEE International Conference on Systems, Man & Cybernetics, Omnipress, Washington, D. C., USA., ISBN , (2003) CW15 L. Horváth, I. J. Rudas, Modeling Behavior of Engineering Objects Using Design Intent Model, Proc. of The 29th Annual Conference of the IEEE Industrial Electronics Society, ISBN , (2003) CW15-c1 (74). D. Hou, H. J. Hoover, Using SCL to Specify and Check Design Intent in Source Code, IEEE Transactions on Software Engineering, 32(6), (2006) CW15-c2 (75). Iyer, G.R., Mills, J.J., Design intent in 2D CAD: Definition and survey, Computer- Aided Design and Applications, 3(1-4), (2006) CW15-c3 (76). Jürgen Kaiser, Dr. Klaus Baron, Jeff Ehlers, Dr.Jost Bernasch, Code vs. Cable. Model-based design and evaluation of E/E systems, in proc of the Electronics in automobiles, Baden-Baden,

20 CW16 L. Horváth, I. J. Rudas, H. M. Amin Shamsudin, Product Modeling Based Integration of Robot Related Engineering Activities, Proc. of the 2002 IEEE International Conference on Robotics and Automation, ISBN , Washington, D. C., USA, (2002) CW16 c1 (77). F. Xiao, Z Jian, W Zhang, T Wang, D Wang, M Chen, An integrated data model and its application for missile design based on hyper-graph, in proc. of the International Conference on Computers & Industrial Engineering, Troyes, France, ISBN: , 2009, pp CW17 L. Horváth I. J. Rudas, Intelligent Computer Methods in Behavior Based Engineering Modeling, Bridging the Digital Divide: Cyber-development, Human Progress, Peace and Prosperity, Proc. of the 2002 IEEE International Conference on Systems, Man and Cybernetics, ISBN, Hammamet, Tunisia, WP1F2 (2002) CW18 L. Horváth, I. J. Rudas, Integrating Expert Knowledge in Behavioral Feature Based Product Models, Proc. of The 28th Annual Conference of the IEEE Industrial Electronics Society, ISBN , Sevilla, Spain, IIT 12/4 (2002) CW19 L. Horváth, I. J. Rudas, Modeling of the Background of Human Activities in Engineering Modeling, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society, Denver, Colorado, USA, ISBN , (2001) CW20 L. Horváth, I. J. Rudas, C. Couto, Human Intent Models in Integrated Product Modeling, in Proc. of the th Annual Conference of the IEEE Industrial Electronics Society, Nagoya, Aichi, Japan, ISBN , 2000, pp CW20 c1 (78). Baron, C.; Poinot, T.; Ribardiere, P.; Trigeassou, J.C., A methodology for estimation of the physical parameters of static or steady-state models, 2002 IEEE International Conference on Systems Man and Cybernetics, Volume 7, pp. 1-6 (2002) CW20 c2 (79). W. Z. Yang, S. Q. Xie, Q. S. Ai, Z. D. Zhou, Recent development on product modelling: a review, in International Journal of Production Research, ISSN (46)21, pp (2008) CW21 L. Horváth, I. J. Rudas, G. P. Hancke, Associative Modeling of Machining Processes Using Feature Based Solid Part Models, Proc. of the 26th Annual Conference of the IEEE Industrial Electronics Society, Nagoya, Aichi, Japan, ISBN , (2000). CW21 c1 (80). Sui, B., Du, D., Chang, B., Zhai, F., Wang, L.: Visual information model of carbody welding and assembly process, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED 14(1), (2003) CW22 L. Horvath, I. J. Rudas: Constraint Based Modeling of Automatic Shape Generation Proceedings of the 1999 IEEE International Conference on Systems, Man, and Cybernetic, Human Communication and Cybernetics, IEEE, Tokyo, 1999, Volume 4, CW22-c1 (81). Y.A.H. El Hini: Planning of Part Manufacturing Process using Generic Model. Proceedings of the 2001 IEEE International Conference on Intelligent Engi-neering Systems (INES 2001), Helsinki, Finland, September 16-18, 2001, It is stated in [81] that the structure of form features (5 lines, p. 423) 20

21 CW22-c2 (82). Baron, C.; Poinot, T.; Ribardiere, P.; Trigeassou, J.C.; A methodology for estimation of the physical parameters of static or steady-state models,, 2002 IEEE International Conference on Systems Man and Cybernetics Volume 7, 1-6 (2002) CW23 L. Horvath, I. J. Rudas: Human Intent Description as a Tool for Communication Between Engineers, Proceedings of the 1999 IEEE International Conference on Systems, Man, and Cybernetics, Human Communication and Cybernetics, IEEE, Tokyo, 1999, Volume 2, pp CW23-c1 (83). Carol Tenopir, Donald W. King: Communication Patterns of Engineers, Wiley- IEEE , and Imre J. Rudas (p 213) CW23-c2 (84). Hou, D., Hoover, H.J., Using SCL to specify and check design intent in source code, IEEE Transactions on Software Engineering Volume 32, Issue 6, (2006) CW24 L. Horváth, I. J. Rudas, J. F. Bitó Modeling Design Intent in Concurrent Engineering, Proceedings of the 25th Annual Conference of the IEEE Industrial Electronics Society, IECON '99, San José, California, USA CW24-c1 (85). K. S. Chin, Y. Zhao, C. K. Mok, STEP-Based Multiview Integrated Product Modelling for Concurrent Engineering, in The International Journal of Advanced Manufacturing Technology, Vol. 20, no. 12, CW24-c2 (86). Y.A.H. El Hini: Planning of Part Manufacturing Process using Generic Model. Proceedings of the 2001 IEEE International Conference on Intelligent Engi-neering Systems (INES 2001), Helsinki, Finland, September 16-18, 2001, pp A Method is proposed in [83] for modeling design intent (6 lines, p. 424) CW24-c3 (87). A. Espinosa-Bautista, R. Young, The use and representation of design intent to support engineering designer, Proc of the Computer-Based Design: Engineer-ing Design Conference 2002, London, Great Britain, ISBN CW25 L. Horváth, I. J. Rudas: Description of Design Intent in Product Models, Proceedings of the 1998 IEEE International Conference on Systems, Man, and Cybernetics, Information, Intelligence and Systems, IEEE, San Diego, California, USA, 1998, Volume 2, CW26 L. Horváth, I. J. Rudas: Evaluation of Petri Net Process Model Representation as a Tool of Virtual Manufacturing, Proceedings of the 1998 IEEE International Conference on Systems, Man, and Cybernetics, Information, Intelligence and Systems, IEEE, San Diego, California, USA, 1998, Volume 1, pp CW26-c1 (88). Wu, S., Sun, X.: Evaluation of manufacturability of manufacture process model based on KR-PetriNet, ICMA Proceedings of the International Conference on Manufacturing Automation: Advanced Design and Manufacturing in Global Competition 2004, CW26-c2 (89). Deviprasad, T., Kesavadas, T.: Virtual prototyping of assembly components using process modeling, Journal of Manufacturing Systems Volume 22, Issue 1, 2003, CW26-c3 (90). J. Tick, P-graph-based Workflow Modelling, in Acta Polytechnica Hunga-rica, ISSN , Budapest, Hungary, Volume 4, No. 1, 2007, (Petri net P. 77) 21

22 CW26-c4 (91). J. Tick, Workflow Modelling Based on Process Graph,. in proc of the 5th Slovakian-Hungarian Joint Symposium on Applied Machine Intelligence, SAMI 2007, Poprad, Slovakia ISBN , 2007, (Petri net P. 422) CW26-c5 (92). M.L. Yang, K. Cheng, G.E. Taylor, A, Dow, Petri net as a tool with application in modelling an Internet-based virtual manufacturing enterprise, in book Computer-aided Production Engineering Cape 2000, McGeough, J A (Editor), Wiley, ISBN: X. CW26-c6 (93). Daniel Eichhorn and Agnes Koschmider and Yu Li and Peter Stürzel and Andreas Oberweis and Ralf Trunko, 3D Support for Business Process Simulation, 33rd Annual IEEE International Computer Software and Applications Conference, Seattle, Washington, USA, 2009, ISBN: , pp, CW26-c7 (94). Jihua Wang and Hong Liu, Study of 3D Model Function-Coded Genome in Evolutionary Design, in book Growth and Development of Computer-Aided Innovation, Springer Boston, ISBN , 2009, pp CW27 L. Horváth, I. J. Rudas: Generating and Evaluation of Manufacturing Process Models, Proceedings of the IECON'98-24th Annual Conference of the IEEE Industrial Electronics Society, Aachen, Germany, CW28 L. Horváth, I. J. Rudas, Procedures for Generating and Evaluation of Generic Manufacturing Process Model Entities, Proceedings of the 1997 IEEE International Conference on Systems, Man and Cybernetics, Computational Cybernetics and Simulation, Volume 1, Orlando, Florida, USA, 1997, pp CW29 L. Horváth, I. J. Rudas, Attaching Knowledge to Product Model for Representation of Human Intent, Proceedings of the 1997 IEEE International Conference on Systems, Man and Cybernetics, Computational Cybernetics and Simulation, Volume 2, Orlando, Florida, USA, 1997, CW29-c1 (95). Wang Jibin, Cao Qing, Xiong Guangleng: A Product Development Process History Management System, Computer Engineering and Applications 2000 Vol.36, No.6, 12-14, 38 [5] CW29-c2 (96). T Maeda, et. al, Personal design system and personal equipment production system for actually producing equipment having designed appearance, US Pa-tent, 5,966,310, 1999 CW29-c3 (97). T. Kilpeläinen, P Tyrväinen, T, Kärkkäinen, Leveraging the Concept of Product Model in Process Industries, in proc. of the 1st Nordic conference of Product Lifecycle Management, Göteborg, Sweden, 2006, pp CW30 I. J. Rudas, L. Horváth, J. Bencze: Petri Net Modeling of Manufacturing Processes for CAD/CAM and FMS Applications, Proceedings of IECON'97 - The 23rd Annual International Conference of the IEEE Industrial Electronics Society, New Orleans, Louisiana, USA, November, 1997 CW31 I. J. Rudas, L. Horváth, Modeling Man-Machine Processes in CAD/CAM and Flexible Manufacturing Systems, Proceedings of the IECON'96 conference, Taipei, Taiwan, 1996, pp CW31-c1 (98). Jeffrey Too Chuan Tan, Feng Duan, Ye Zhang, Ryu Kato, and Tamio Arai, Task modeling approach to enhance man-machine collaboration in cell production, in Proc. of 22

23 the 2009 IEEE international conference on Robotics and Automation, Kobe, Japan, ISBN , 2009, pp CW32 L. Horváth, I. J. Rudas, Knowledge Based Generation of Petri Net Representation of Manufacturing Process Model Entities, Proceedings of the 1996 IEEE International Conference on Systems, Man and Cybernetics, Beijing, 1996, CW32-c1 (99). Petri Net Based Modeling of Intelligent Manufacturing System, China Mechanical Engineering, Beijing, China, 2001 Vol.12 No.12, , ISSN X(2001) , [5] CW32-c2 (100). Network Sensor Management System Modeling Based on Object-oriented Petri Net, in Computer and Modernization, Beijing, China, 2004 No.2, 61-63, ISSN (2004) , [2] CW33 L Horváth, I. J. Rudas: Multilevel Modeling of Manufacturing Processes Using Object Oriented Petri Nets and Advanced Knowledge Representation. Proceedings of 1995 IEEE 21st International Conference on Industrial Electronics, Control, and Instrumentation. November, 1995, Orlando, USA, pp CW33-c1 (101). Cay, F., Chassapis, C.: An IT view on perspectives of computer aided process planning research, Computers in Industry Volume 34, Issue 3, December 1997, CW34 L. Horváth, I. J. Rudas: Modeling Human Computer Interactions in Collaborative Design and Planning. Proceeding of the 1995 IEEE International Conference on Systems, Man and Cybernetics. Vancouver, Canada, 1995, October. Volume 2, CW34-c1 (102). Chen Jianneng Zhao Yun, Multi-crop optimization irrigation model by genetie algrithms of best saving tactocs, Trans of the Chin Society of Agricultural Eng, Vol.34 No.5, 46-49, [10]. CW34-c2 (103). T Maeda, et. al, Personal design system and personal equipment production system for actually producing equipment having designed appearance, US Pa-tent, 5,966,310, 1999 CW34-c3 (104). Martín G. Marchetta, Raymundo Q. Forradellas, A New Model for Automatic Generation of Plan Libraries for Plan Recognition, Brazilian Jounal of Operations & Production Management, Vol 3, No 2, pp. 5-19, (2006) CW35 L. Horváth, I. J. Rudas: Modeling of Manufacturing Processes Using Object Oriented Extended Petri Nets and Advanced Knowledge Representations. Proceeding of the 1995 IEEE International Conference on Systems, Man and Cybernetics. Vancouver, Canada, 1995, October.Volume 3, pp CW35-c1 (105). Petri Net Based Modeling of Intelligent Manufacturing System, China Mechanical Engineering, Beijing, China, 2001 Vol.12 No.12 P , ISSN X(2001) , [5] CW35-c2 (106). Network Sensor Management System Modeling Based on Object-oriented Petri Net, in Computer and Modernization, Beijing, China, 2004 No.2 P.61-63, ISSN (2004) , [2] CW35-c3 (107). B. Hautbergue, E. Benoit, S. Donders, Parameter setting and automatic compilation of structures using standard representation networks, EP Patent 1,326,148,