Cisco Configuration Professional Workshop

Size: px
Start display at page:

Download "Cisco Configuration Professional Workshop"

Transcription

1 Cisco Configuration Professional Workshop Basic Lab-Configuration

2 :47 2

3 Intuitive device management GUI for easily configuring access routers / switches! Windows Based Application GUI based Device Management tool for access routers Unified Communications License Management (CCP 2.5 and later) Application Management :47 3

4 Windows Based Application :47 4

5 Limitations and Restrictions :47 5

6 Supported Routers :47 6

7 GUI based Device Management tool for access routers :47 7

8 Toolbar! GUI based Device Management tool for access routers Home - > Community View, add, edit and discover Devices Configure button - > Router features werden links angezeigt - > nicht vorhandene Features ; keine Anzeige Monitor button - > Anzeige der monitorbaren Funktionen z.b. Tunnelstatistik, Interfaceauslastung... Community icon - > add or edit communitys :47 8

9 Device Views! - check the status - test the possibilities - configure your devices - monitor :49 9

10 GUI based Device Management tool for access routers Interface Management Interfaces Supported LAN WAN Wireless LAN Cellular WAN (3G) Power Management ( Energy wise) Analog Trunks Digital Trunks :49 10

11 GUI based Device Management tool for access routers Router Basic Router Functionalities: Hostname Username, Password DHCP, DNS NAT Static Routing Dynamic Routing ( RIP, OSPF, EIGRP) Advanced Functionalities QoS Performance Routing (PFR) :50 11

12 GUI based Device Management tool for access routers Performance Routing :50 12

13 GUI based Device Management tool for access routers Security Security Functionalities: One step router lockdown Security audit of the router Firewall ( Zone Based and CBAC) VPN Advanced Functionalities Intrusion Prevention System (IPS) Content Filtering :51 13

14 GUI based Device Management tool for access routers Security :51 14

15 GUI based Device Management tool for access routers Security :51 15

16 GUI based Device Management tool for access routers Unified Communications :51 16

17 GUI based Device Management tool for access routers Unified Communications :52 17

18 GUI based Device Management tool for access routers Unified Communications :52 18

19 GUI based Device Management tool for access routers License Management (CCP 2.5 and later) Installing and enabling permanet license Enabling evaluation license Displaying of error message if license is not enabled for a particular feature :52 19

20 GUI based Device Management tool for access routers License Management (CCP 2.5 and later) :52 20

21 GUI based Device Management tool for access routers Application Management z.b. Creating a user profile Importing a user profile Discovering a router to verify profile settings Working with templates creating, editing applying rollback :52 21

22 GUI based Device Management tool for access routers Application Management :52 22

23 GUI based Device Management tool for access routers Application Management CCP allows you to perform the following on an Application Extension platform module. Configure interfaces on the module SSH and Syslog server system admin, DNS, Timezone and NTP management of third party applications :52 23

24 GUI based Device Management tool for access routers Application Management Management of third party applications :52 24

25 CCP bietet noch wesentlich mehr an Funktionen. Fragen zum Allgemeinen? Weiter mit der Installation und Netzwerkkonfiguration unseres Labornetzes! Quellen: Cisco CCP-Web-Pages CCP User Guid 2.5 Shankar Ramachandran Cisco Configuration Professional :53 25

26 Labornetzwerk zur Anwendung CCP Lab-Cloud Platz Nr.1 Inside /24 Outside /30 RIP v2 Platz Nr. n Inside n.0/24 Outside n /30 RIP v :53 26

27 Steps: 1. Überprüfung Java-Settings 2. Installation CCP cisco-config-pro-k9-pkg-2_5-en.exe :53 27

28 Step: 3. Router preconfiguration with CLI Configure: Router>ena Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname CCP1 CCP1(config)#ip domain-n CCP1(config)#ip domain-name CCP.test.de CCP1(config)#username admin privilege 15 secret cisco CCP1(config)#ip http authentication local CCP1(config)#ip http server CCP1(config)#ip http secure-server % Generating 1024 bit RSA keys, keys will be non-exportable...[ok] CCP1(config)# May 23 13:04:17.414: %SSH-5-ENABLED: SSH 1.99 has been enabled CCP1(config)#interf fastethernet0/0 CCP1(config-if)#ip address CCP1(config-if)#no shut CCP1(config-if)#line vty 0 4 CCP1(config-line)#login local CCP1(config-line)#transport input ssh telnet CCP1(config-line)#ip dhcp pool CCP1 CCP1(dhcp-config)#network /24 CCP1(dhcp-config)#default-router CCP1(dhcp-config)#dns-server CCP1(dhcp-config)#domain-name ccp.test.de CCP1(dhcp-config)# CCP1#wr :53 28

29 Step: 4. Start Using Cisco CP Cisco CP works with device communities. A community consists of one or more devices that you specify by providing their IP addresses and login credentials. After you create the community, you can begin working with the devices in it. This section contains the following parts: Creating a Community and Adding Devices Creating an Initial Configuration of a Feature Editing a Configuration :53 29

30 Step: 4. Start Using Cisco CP :53 30

31 Step: 5. Creating a Community and Adding Devices You can also open the Manage Community dialog box in the following ways: From the toolbar, click the Manage Community icon. From the menu bar, choose Application > Manage Community :53 31

32 Step: 5. Creating a Community and Adding Devices If you want Cisco CP to connect securely with the device, check the Connect Securely check box. HTTPS port 443 and SSH port 22 information is automatically added to the device. Use the Discover :53 32

33 Step: 5.1 If you use Cisco CP to connect securely with the device Accept the certificate yes! :53 33

34 Step: 6. Community View Page :53 34

35 Step: 6. Community View Page - check the status - test the possibilities - configure your devices - monitor :53 35

36 Step: 7. Configure Tree :53 36

37 Step: 8. Interfaces and Connections :53 37

38 Step: 9. Edit Interfaces/Connections Inside Network n.0 /24 Create New Connection for Outside (WAN/ or LAN) n /30 Steps: 10. Connect to your neighbours 11. Configure the neighbours connection :53 38

39 Step: 12. Configure Routing Edit Dynamic Routing Select RIP Select Vers. 2 ADD your networks Verify and deliver the commands :53 39

40 Step: 13. Test the connectivity to your neighbours, ping, traceroute, Telnet..., End of the Basic- CCP-LAB :53 40

Configuring Devices for Use with Cisco Configuration Professional (CCP) 2.5

Configuring Devices for Use with Cisco Configuration Professional (CCP) 2.5 Configuring Devices for Use with Cisco Configuration Professional (CCP) 2.5 Objectives Part 1: Configure CCP Access for Routers Enable HTTP/HTTPS server. Create a user account with privilege level 15.

More information

PT Activity: Configure Cisco Routers for Syslog, NTP, and SSH Operations

PT Activity: Configure Cisco Routers for Syslog, NTP, and SSH Operations PT Activity: Configure Cisco Routers for Syslog, NTP, and SSH Operations Instructor Version Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Switch Port R1 FA0/1

More information

Note: This case study utilizes Packet Tracer. Please see the Chapter 5 Packet Tracer file located in Supplemental Materials.

Note: This case study utilizes Packet Tracer. Please see the Chapter 5 Packet Tracer file located in Supplemental Materials. Note: This case study utilizes Packet Tracer. Please see the Chapter 5 Packet Tracer file located in Supplemental Materials. CHAPTER 5 OBJECTIVES Configure a router with an initial configuration. Use the

More information

Objectives. Background. Required Resources. CCNA Security

Objectives. Background. Required Resources. CCNA Security Chapter 8 Lab B, Configuring a Remote Access VPN Server and Client Topology IP Addressing Table Device Interface IP Address Subnet Mask Default Gateway Switch Port R1 FA0/1 192.168.1.1 255.255.255.0 N/A

More information

Skills Assessment Student Training Exam

Skills Assessment Student Training Exam Skills Assessment Student Training Exam Topology Assessment Objectives Part 1: Initialize Devices (8 points, 5 minutes) Part 2: Configure Device Basic Settings (28 points, 30 minutes) Part 3: Configure

More information

Device Interface IP Address Subnet Mask Default Gateway

Device Interface IP Address Subnet Mask Default Gateway Felix Rohrer Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 99 192.168.99.11 255.255.255.0 192.168.99.1 S2 VLAN 99 192.168.99.12 255.255.255.0 192.168.99.1

More information

Chapter 8 Lab B: Configuring a Remote Access VPN Server and Client

Chapter 8 Lab B: Configuring a Remote Access VPN Server and Client Chapter 8 Lab B: Configuring a Remote Access VPN Server and Client Topology Note: ISR G2 devices have Gigabit Ethernet interfaces instead of FastEthernet Interfaces. All contents are Copyright 1992 2012

More information

Cisco Configuration Professional Quick Start Guide

Cisco Configuration Professional Quick Start Guide Cisco Configuration Professional Quick Start Guide April 29, 2011 This document explains how to start using Cisco Configuration Professional Express (Cisco CP Express) and Cisco Configuration Professional

More information

642 523 Securing Networks with PIX and ASA

642 523 Securing Networks with PIX and ASA 642 523 Securing Networks with PIX and ASA Course Number: 642 523 Length: 1 Day(s) Course Overview This course is part of the training for the Cisco Certified Security Professional and the Cisco Firewall

More information

Configuring Basic Settings

Configuring Basic Settings CHAPTER 12 This chapter describes how to configure basic settings on your ASASM that are typically required for a functioning configuration. This chapter includes the following sections: Configuring the

More information

Lab 9.1.1 Organizing CCENT Objectives by OSI Layer

Lab 9.1.1 Organizing CCENT Objectives by OSI Layer Lab 9.1.1 Organizing CCENT Objectives by OSI Layer Objectives Organize the CCENT objectives by which layer or layers they address. Background / Preparation In this lab, you associate the objectives of

More information

TotalCloud Phone System

TotalCloud Phone System TotalCloud Phone System Cisco SF 302-08P PoE VLAN Configuration Guide Note: The below information and configuration is for deployment of the Cbeyond managed switch solution using the Cisco 302 8 port Power

More information

Configuring a customer owned router to function as a switch with Ultra TV

Configuring a customer owned router to function as a switch with Ultra TV Configuring a customer owned router to function as a switch with Ultra TV This method will turn the customer router into a wireless switch and allow the Ultra Gateway to perform routing functions and allow

More information

Lab 8.4.2 Configuring Access Policies and DMZ Settings

Lab 8.4.2 Configuring Access Policies and DMZ Settings Lab 8.4.2 Configuring Access Policies and DMZ Settings Objectives Log in to a multi-function device and view security settings. Set up Internet access policies based on IP address and application. Set

More information

ADTRAN 3120 / 3130 Internet Configuration Guide

ADTRAN 3120 / 3130 Internet Configuration Guide AdTran Internet Configuration Guide v1.15 ADTRAN 3120 / 3130 Internet Configuration Guide 169 Saxony Road, Suite 212 Encinitas, CA 92024 Phone & Fax: (800) 477-1477 Table of Contents Introduction... 1

More information

CCNA Security. Chapter Two Securing Network Devices. 2009 Cisco Learning Institute.

CCNA Security. Chapter Two Securing Network Devices. 2009 Cisco Learning Institute. CCNA Security Chapter Two Securing Network Devices 1 The Edge Router What is the edge router? - The last router between the internal network and an untrusted network such as the Internet - Functions as

More information

Broadband Phone Gateway BPG510 Technical Users Guide

Broadband Phone Gateway BPG510 Technical Users Guide Broadband Phone Gateway BPG510 Technical Users Guide (Firmware version 0.14.1 and later) Revision 1.0 2006, 8x8 Inc. Table of Contents About your Broadband Phone Gateway (BPG510)... 4 Opening the BPG510's

More information

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299 VoiceGear/3CX Integration Guide Ver.0.1 Page 2 1. OVERVIEW... 3 1.1 SETTING UP 3CX PBX...4 1.2 SETTING UP VOICEGEAR GATEWAY...5 2. VOICEGEAR-3CX SIP INTEGRATION... 6 2.1 3CX CONFIGURATION...7 2.2 VOICEGEAR

More information

Unified Threat Management

Unified Threat Management Unified Threat Management QUICK START GUIDE CR35iNG Appliance Document Version: PL QSG 35iNG/96000-10.04.5.0.007/250121014 DEFAULTS Default IP addresses Ethernet Port IP Address Zone A 172.16.16.16/255.255.255.0

More information

Administering Cisco ISE

Administering Cisco ISE CHAPTER 8 This chapter describes the administrative activities for the Cisco Identity Services Engine (ISE) and how to perform them. The following topics are covered: Logging In, page 8-1 System Time and

More information

Getting Started with Cisco Configuration Professional

Getting Started with Cisco Configuration Professional Getting Started with Cisco Configuration Professional Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)

More information

ACADEMIA LOCAL CISCO UCV-MARACAY CONTENIDO DE CURSO CURRICULUM CCNA. SEGURIDAD SEGURIDAD EN REDES. NIVEL I. VERSION 2.0

ACADEMIA LOCAL CISCO UCV-MARACAY CONTENIDO DE CURSO CURRICULUM CCNA. SEGURIDAD SEGURIDAD EN REDES. NIVEL I. VERSION 2.0 ACADEMIA LOCAL CISCO UCV-MARACAY CONTENIDO DE CURSO CURRICULUM CCNA. SEGURIDAD SEGURIDAD EN REDES. NIVEL I. VERSION 2.0 Module 1: Vulnerabilities, Threats, and Attacks 1.1 Introduction to Network Security

More information

How To - Deploy Cyberoam in Bridge Mode

How To - Deploy Cyberoam in Bridge Mode How To - Deploy Cyberoam in Bridge Mode Cyberoam appliance can be deployed in a network in two modes: Bridge mode. Popularly known as Transparent mode Gateway mode. Popularly known as Route mode Article

More information

Installation of the On Site Server (OSS)

Installation of the On Site Server (OSS) Installation of the On Site Server (OSS) rev 1.1 Step #1 - Initial Connection to the OSS Having plugged in power and an ethernet cable in the eth0 interface (see diagram below) you can connect to the unit

More information

Lab 8.3.1.2 Configure Basic AP Security through IOS CLI

Lab 8.3.1.2 Configure Basic AP Security through IOS CLI Lab 8.3.1.2 Configure Basic AP Security through IOS CLI Estimated Time: 30 minutes Number of Team Members: Students will work in teams of two. Objective In this lab, the student will learn the following

More information

SSL-VPN 200 Getting Started Guide

SSL-VPN 200 Getting Started Guide Secure Remote Access Solutions APPLIANCES SonicWALL SSL-VPN Series SSL-VPN 200 Getting Started Guide SonicWALL SSL-VPN 200 Appliance Getting Started Guide Thank you for your purchase of the SonicWALL SSL-VPN

More information

Lab 3.3 Configuring QoS with SDM

Lab 3.3 Configuring QoS with SDM Lab 3.3 Configuring QoS with SDM Learning Objectives Configure Quality of Service tools with the SDM QoS wizard Monitor traffic patterns using the SDM QoS interface Topology Diagram Scenario Cisco Security

More information

Cisco Networking Professional-6Months Project Based Training

Cisco Networking Professional-6Months Project Based Training Cisco Networking Professional-6Months Project Based Training Core Topics Cisco Certified Networking Associate (CCNA) 1. ICND1 2. ICND2 Cisco Certified Networking Professional (CCNP) 1. CCNP-ROUTE 2. CCNP-SWITCH

More information

Shield Pro. Quick Start Guide

Shield Pro. Quick Start Guide Shield Pro In the box: Power Adapter Shield Network Cables Let s get started! Before installing Shield you will first need to determine which operating mode best fits your needs. To help with this process,

More information

Multi-Homing Security Gateway

Multi-Homing Security Gateway Multi-Homing Security Gateway MH-5000 Quick Installation Guide 1 Before You Begin It s best to use a computer with an Ethernet adapter for configuring the MH-5000. The default IP address for the MH-5000

More information

Create a VPN on your ipad, iphone or ipod Touch and SonicWALL NSA UTM firewall - Part 1: SonicWALL NSA Appliance

Create a VPN on your ipad, iphone or ipod Touch and SonicWALL NSA UTM firewall - Part 1: SonicWALL NSA Appliance Create a VPN on your ipad, iphone or ipod Touch and SonicWALL NSA UTM firewall - Part 1: SonicWALL NSA Appliance This article will easily explain how to configure your Apple ipad, iphone or ipod Touch

More information

Using the NetVanta 7100 Series

Using the NetVanta 7100 Series MENU OK CANCEL 1 2 3 4 5 6 7 8 9 * 0 # MENU MENU OK CANCEL CANCEL 1 2 3 4 5 6 7 8 9 * 0 # MENU OK CANCEL CANCEL 1 2 3 4 5 6 7 8 9 * 0 # MENU OK CANCEL CANCEL 1 2 3 4 5 6 7 8 9 * 0 # MENU OK CANCEL 1 2

More information

Cisco Certified Network Associate Exam. Operation of IP Data Networks. LAN Switching Technologies. IP addressing (IPv4 / IPv6)

Cisco Certified Network Associate Exam. Operation of IP Data Networks. LAN Switching Technologies. IP addressing (IPv4 / IPv6) Cisco Certified Network Associate Exam Exam Number 200-120 CCNA Associated Certifications CCNA Routing and Switching Operation of IP Data Networks Operation of IP Data Networks Recognize the purpose and

More information

Network Security Pod Version 2.0

Network Security Pod Version 2.0 Network Security Pod Version 2.0 Planning and Installation Guide For Cisco Networking Academy Network Security 2.0 Curriculum Document Version: 2008-03-10 Copyright 2008, Network Development Group, Inc.

More information

Firewall VPN Router. Quick Installation Guide M73-APO09-380

Firewall VPN Router. Quick Installation Guide M73-APO09-380 Firewall VPN Router Quick Installation Guide M73-APO09-380 Firewall VPN Router Overview The Firewall VPN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN,

More information

Network Simulator Lab Study Plan

Network Simulator Lab Study Plan The CCNA 640-802 Network Simulator has 300 lab exercises, organized both by type (Skill Builder, Configuration Scenario, Troubleshooting Scenario, and Subnetting Exercise) and by major topic within each

More information

User Manual. Page 2 of 38

User Manual. Page 2 of 38 DSL1215FUN(L) Page 2 of 38 Contents About the Device...4 Minimum System Requirements...5 Package Contents...5 Device Overview...6 Front Panel...6 Side Panel...6 Back Panel...7 Hardware Setup Diagram...8

More information

NEFSIS DEDICATED SERVER

NEFSIS DEDICATED SERVER NEFSIS TRAINING SERIES Nefsis Dedicated Server version 5.2.0.XXX (DRAFT Document) Requirements and Implementation Guide (Rev5-113009) REQUIREMENTS AND INSTALLATION OF THE NEFSIS DEDICATED SERVER Nefsis

More information

Multi-Homing Dual WAN Firewall Router

Multi-Homing Dual WAN Firewall Router Multi-Homing Dual WAN Firewall Router Quick Installation Guide M73-APO09-400 Multi-Homing Dual WAN Firewall Router Overview The Multi-Homing Dual WAN Firewall Router provides three 10/100Mbit Ethernet

More information

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Cisco Call Manager Express Version 8.5

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Cisco Call Manager Express Version 8.5 CISCO SIP Trunking using Optimum Business SIP Trunk Adaptor and the Cisco Call Manager Express Version 8.5 Goal The purpose of this configuration guide is to describe the steps needed to configure the

More information

Polycom Phones User Guide. 2003-2012 Bicom Systems

Polycom Phones User Guide. 2003-2012 Bicom Systems I Table of Contents Part I Introduction 1 Part II Requirements 1 Part III Installation 2 1 Power... Adapter 3 2 Power... over Ethernet (PoE) 3 3 Factory... Settings 3 3 Part IV Registering Phone 1 Manual...

More information

Configuring SSH Sentinel VPN client and D-Link DFL-500 Firewall

Configuring SSH Sentinel VPN client and D-Link DFL-500 Firewall Configuring SSH Sentinel VPN client and D-Link DFL-500 Firewall I. Configuring D-Link DFL-500 Firewall 1. Connect your computer to the internal port of the DFL-500 Firewall 2. Change the computer IP address

More information

Dynamic DNS How-To Guide

Dynamic DNS How-To Guide Configuration Guide Dynamic DNS How-To Guide Overview This guide will show you how to set up a Dynamic DNS host name under the D-Link DDNS service with your D-Link ShareCenter TM. Dynamic DNS is a protocol

More information

Lab 8.4.2 Configuring Access Policies and DMZ Settings

Lab 8.4.2 Configuring Access Policies and DMZ Settings Lab 8.4.2 Configuring Access Policies and DMZ Settings Objectives Log in to a multi-function device and view security settings. Set up Internet access policies based on IP address and application. Set

More information

Abstract. Avaya Solution & Interoperability Test Lab

Abstract. Avaya Solution & Interoperability Test Lab Avaya Solution & Interoperability Test Lab Application Notes for Configuring a Virtual Private Network (VPN) for Avaya IP Office using the Edgewater Networks EdgeMarc 4500 VoIP VPN Appliance - Issue 1.0

More information

Optimum Business SIP Trunk Set-up Guide

Optimum Business SIP Trunk Set-up Guide Optimum Business SIP Trunk Set-up Guide For use with IP PBX only. SIPSetup 07.13 FOR USE WITH IP PBX ONLY Important: If your PBX is configured to use a PRI connection, do not use this guide. If you need

More information

CISCO IOS NETWORK SECURITY (IINS)

CISCO IOS NETWORK SECURITY (IINS) CISCO IOS NETWORK SECURITY (IINS) SEVENMENTOR TRAINING PVT.LTD [Type text] Exam Description The 640-553 Implementing Cisco IOS Network Security (IINS) exam is associated with the CCNA Security certification.

More information

Lab 5.5.3 Developing ACLs to Implement Firewall Rule Sets

Lab 5.5.3 Developing ACLs to Implement Firewall Rule Sets Lab 5.5.3 Developing ACLs to Implement Firewall Rule Sets All contents are Copyright 1992 2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 8 Device Interface

More information

UIP1868P User Interface Guide

UIP1868P User Interface Guide UIP1868P User Interface Guide (Firmware version 0.13.4 and later) V1.1 Monday, July 8, 2005 Table of Contents Opening the UIP1868P's Configuration Utility... 3 Connecting to Your Broadband Modem... 4 Setting

More information

This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and

This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNP: Implementing

More information

How to configure your Thomson SpeedTouch 780WL for ADSL2+

How to configure your Thomson SpeedTouch 780WL for ADSL2+ How to configure your Thomson SpeedTouch 780WL for ADSL2+ Connecting up your router This guide assumes that you have successfully: unpacked your router connected it up to your phone socket using the DSL

More information

Lab 8.3.13 Configure Cisco IOS Firewall CBAC

Lab 8.3.13 Configure Cisco IOS Firewall CBAC Lab 8.3.13 Configure Cisco IOS Firewall CBAC Objective Scenario Topology In this lab, the students will complete the following tasks: Configure a simple firewall including CBAC using the Security Device

More information

Chapter 4 Customizing Your Network Settings

Chapter 4 Customizing Your Network Settings Chapter 4 Customizing Your Network Settings This chapter describes how to configure advanced networking features of the RangeMax Dual Band Wireless-N Router WNDR3300, including LAN, WAN, and routing settings.

More information

M2M Series Routers. Port Forwarding / DMZ Setup

M2M Series Routers. Port Forwarding / DMZ Setup Introduction Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. Many internet services and applications use designated

More information

Lab 8.3.3b Configuring a Remote Router Using SSH

Lab 8.3.3b Configuring a Remote Router Using SSH Lab 8.3.3b Configuring a Remote Router Using SSH Objectives Use SDM to configure a router to accept SSH connections. Configure SSH client software on a PC. Establish a connection to a Cisco ISR using SSH

More information

Configuring Global Protect SSL VPN with a user-defined port

Configuring Global Protect SSL VPN with a user-defined port Configuring Global Protect SSL VPN with a user-defined port Version 1.0 PAN-OS 5.0.1 Johan Loos johan@accessdenied.be Global Protect SSL VPN Overview This document gives you an overview on how to configure

More information

QUICK START GUIDE. Cisco C170 Email Security Appliance

QUICK START GUIDE. Cisco C170 Email Security Appliance 1 0 0 1 QUICK START GUIDE Email Security Appliance Cisco C170 303357 Cisco C170 Email Security Appliance 1 Welcome 2 Before You Begin 3 Document Network Settings 4 Plan the Installation 5 Install the Appliance

More information

Using VDOMs to host two FortiOS instances on a single FortiGate unit

Using VDOMs to host two FortiOS instances on a single FortiGate unit Using VDOMs to host two FortiOS instances on a single FortiGate unit Virtual Domains (VDOMs) can be used to divide a single FortiGate unit into two or more virtual instances of FortiOS that function as

More information

Using LiveAction with Cisco Secure ACS (TACACS+ Server)

Using LiveAction with Cisco Secure ACS (TACACS+ Server) LiveAction Application Note Using LiveAction with Cisco Secure ACS (TACACS+ Server) September 2012 http://www.actionpacked.com Table of Contents 1. Introduction... 1 2. Cisco Router Configuration... 2

More information

Only LDAP-synchronized users can access SAML SSO-enabled web applications. Local end users and applications users cannot access them.

Only LDAP-synchronized users can access SAML SSO-enabled web applications. Local end users and applications users cannot access them. This chapter provides information about the Security Assertion Markup Language (SAML) Single Sign-On feature, which allows administrative users to access certain Cisco Unified Communications Manager and

More information

Cisco ISE Command-Line Interface

Cisco ISE Command-Line Interface This chapter provides information on the Cisco Identity Services Engine (Cisco ISE) command-line interface (CLI) that you can use to configure and maintain Cisco ISE. Cisco ISE Administration and Configuration

More information

Cisco Certified Security Professional (CCSP)

Cisco Certified Security Professional (CCSP) 529 Hahn Ave. Suite 101 Glendale CA 91203-1052 Tel 818.550.0770 Fax 818.550.8293 www.brandcollege.edu Cisco Certified Security Professional (CCSP) Program Summary This instructor- led program with a combination

More information

LAN-Cell to Cisco Tunneling

LAN-Cell to Cisco Tunneling LAN-Cell to Cisco Tunneling Page 1 of 13 LAN-Cell to Cisco Tunneling This Tech Note guides you through setting up a VPN connection between a LAN-Cell and a Cisco router. As the figure below shows, the

More information

Mobility System Software Quick Start Guide

Mobility System Software Quick Start Guide Mobility System Software Quick Start Guide Version 8.0 P/N 530-041387 Rev.05 Table of Contents About this Guide Using the Web Quick Start (WLC2, WLC8, WLC200,WLC800R, and WLC880R) Remotely Configuring

More information

IIS, FTP Server and Windows

IIS, FTP Server and Windows IIS, FTP Server and Windows The Objective: To setup, configure and test FTP server. Requirement: Any version of the Windows 2000 Server. FTP Windows s component. Internet Information Services, IIS. Steps:

More information

CREATING AN IKE IPSEC TUNNEL BETWEEN AN INTERNET SECURITY ROUTER AND A WINDOWS 2000/XP PC

CREATING AN IKE IPSEC TUNNEL BETWEEN AN INTERNET SECURITY ROUTER AND A WINDOWS 2000/XP PC CREATING AN IKE IPSEC TUNNEL BETWEEN AN INTERNET SECURITY ROUTER AND A WINDOWS 2000/XP PC 1 Introduction Release date: 11/12/2003 This application note details the steps for creating an IKE IPSec VPN tunnel

More information

Cisco CNR and DHCP FAQs for Cable Environment

Cisco CNR and DHCP FAQs for Cable Environment Table of Contents CNR and DHCP FAQs for Cable Environment...1 Questions...1 Introduction...1 Q. How do I access CNR remotely?...1 Q. How do I access CNR remotely if the CNR server is behind a firewall?...2

More information

Cisco Unified Communications 500 Series

Cisco Unified Communications 500 Series Cisco Unified Communications 500 Series IP PBX Provisioning Guide Version 1.0 Last Update: 02/14/2011 Page 1 DISCLAIMER The attached document is provided as a basic guideline for setup and configuration

More information

Chapter 4 Customizing Your Network Settings

Chapter 4 Customizing Your Network Settings . Chapter 4 Customizing Your Network Settings This chapter describes how to configure advanced networking features of the Wireless-G Router Model WGR614v9, including LAN, WAN, and routing settings. It

More information

How to Remotely Access Hikvision Devices User Manual

How to Remotely Access Hikvision Devices User Manual HIKVISION EUROPE B.V. How to Remotely Access Hikvision Devices User Manual (Use to remotely access Hikvision DVR s, NVR s and IP Cameras) Name: Remote Access Publisher: HIKVISION EUROPE B.V. Type: Information

More information

Phone Inventory 1.0 (1000) Installation and Administration Guide

Phone Inventory 1.0 (1000) Installation and Administration Guide Phone Inventory 1.0 (1000) Installation and Administration Guide 2010 VoIP Integration June 23, 2010 Table of Contents Product Overview... 3 Requirements... 3 Application Requirements... 3 Call Manager...

More information

nexvortex Setup Guide

nexvortex Setup Guide nexvortex Setup Guide CISCO UC500 March 2012 Introduction This document is intended only for nexvortex customers and resellers as an aid to setting up the Cisco PBX software to connect to the nexvortex

More information

Integration Guide. Help Desk Authority, Perspective and sl360. 1.800.424.9411 www.scriptlogic.com

Integration Guide. Help Desk Authority, Perspective and sl360. 1.800.424.9411 www.scriptlogic.com Integration Guide Help Desk Authority, Perspective and sl360 1.800.424.9411 www.scriptlogic.com Table of Contents Introduction... 3 Product Overview... 3 Benefits of Product Integration... 3 Advanced Help

More information

Enabling Multiple Wireless Networks on RV320 VPN Router, WAP321 Wireless-N Access Point, and Sx300 Series Switches

Enabling Multiple Wireless Networks on RV320 VPN Router, WAP321 Wireless-N Access Point, and Sx300 Series Switches print email Article ID: 4941 Enabling Multiple Wireless Networks on RV320 VPN Router, WAP321 Wireless-N Access Point, and Sx300 Series Switches Objective In an ever-changing business environment, your

More information

Magnum Network Software DX

Magnum Network Software DX Magnum Network Software DX Software Release Notes Software Revision 3.0.1 RC5, Inc. www..com www..com/techsupport email: support@.com This document contains Confidential information or Trade Secrets, or

More information

A Guide to New Features in Propalms OneGate 4.0

A Guide to New Features in Propalms OneGate 4.0 A Guide to New Features in Propalms OneGate 4.0 Propalms Ltd. Published April 2013 Overview This document covers the new features, enhancements and changes introduced in Propalms OneGate 4.0 Server (previously

More information

(d-5273) CCIE Security v3.0 Written Exam Topics

(d-5273) CCIE Security v3.0 Written Exam Topics (d-5273) CCIE Security v3.0 Written Exam Topics CCIE Security v3.0 Written Exam Topics The topic areas listed are general guidelines for the type of content that is likely to appear on the exam. Please

More information

DEPLOYMENT GUIDE. This document gives a brief overview of deployment preparation, installation and configuration of a Vectra X-series platform.

DEPLOYMENT GUIDE. This document gives a brief overview of deployment preparation, installation and configuration of a Vectra X-series platform. This document gives a brief overview of deployment preparation, installation and configuration of a Vectra X-series platform. Traffic Requirements The Vectra X-series platform detects threats and attacks

More information

Cisco Discovery 3: Introducing Routing and Switching in the Enterprise 157.8 hours teaching time

Cisco Discovery 3: Introducing Routing and Switching in the Enterprise 157.8 hours teaching time Essential Curriculum Computer Networking II Cisco Discovery 3: Introducing Routing and Switching in the Enterprise 157.8 hours teaching time Chapter 1 Networking in the Enterprise-------------------------------------------------

More information

NetBrain Workstation Professional Edition 2.3 Release notes

NetBrain Workstation Professional Edition 2.3 Release notes NetBrain Workstation Professional Edition 2.3 Release notes Major Features...1 Known Issues*...5 NetBrain Workstation Support Site...7 Recommended System Requirements...7 Installation Notes...7 Major Features

More information

If you have questions or find errors in the guide, please, contact us under the following e-mail address:

If you have questions or find errors in the guide, please, contact us under the following e-mail address: 1. Introduction... 2 2. Remote Access via PPTP... 2 2.1. Configuration of the Astaro Security Gateway... 3 2.2. Configuration of the Remote Client...10 2.2.1. Astaro User Portal: Getting Configuration

More information

Lab 3.1.2 Creating a Logical Network Diagram

Lab 3.1.2 Creating a Logical Network Diagram Lab 3.1.2 Creating a Logical Network Diagram Objectives Use router and switch commands to obtain information about an existing network. Use Cisco Network Assistant to obtain information about an existing

More information

Cisco Certified Network Expert (CCNE)

Cisco Certified Network Expert (CCNE) 529 Hahn Ave. Suite 101 Glendale CA 91203-1052 Tel 818.550.0770 Fax 818.550.8293 www.brandcollege.edu Cisco Certified Network Expert (CCNE) Program Summary This instructor- led program with a combination

More information

LAB Configuring NAT. Objective. Background/Preparation

LAB Configuring NAT. Objective. Background/Preparation LAB Configuring NAT Objective Configure a router to use network address translation (NAT) to convert internal IP addresses, typically private addresses, into outside public addresses. Configure static

More information

How To Configure Syslog over VPN

How To Configure Syslog over VPN How To Configure Syslog over VPN Applicable Version: 10.00 onwards Overview Cyberoam provides extensive logging capabilities for traffic, system and network protection functions. Detailed log information

More information

Lab: Basic Router Configuration

Lab: Basic Router Configuration Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Def. Gateway R1 Fa0/0 192.168.1.1 255.255.255.0 N/A S0/0/0 192.168.2.1 255.255.255.0 N/A R2 Fa0/0 192.168.3.1 255.255.255.0 N/A

More information

Barracuda Link Balancer Administrator s Guide

Barracuda Link Balancer Administrator s Guide Barracuda Link Balancer Administrator s Guide Version 1.0 Barracuda Networks Inc. 3175 S. Winchester Blvd. Campbell, CA 95008 http://www.barracuda.com Copyright Notice Copyright 2008, Barracuda Networks

More information

Configuring SSL VPN on the Cisco ISA500 Security Appliance

Configuring SSL VPN on the Cisco ISA500 Security Appliance Application Note Configuring SSL VPN on the Cisco ISA500 Security Appliance This application note describes how to configure SSL VPN on the Cisco ISA500 security appliance. This document includes these

More information

Lab 4.4.8a Configure a Cisco GRE over IPSec Tunnel using SDM

Lab 4.4.8a Configure a Cisco GRE over IPSec Tunnel using SDM Lab 4.4.8a Configure a Cisco GRE over IPSec Tunnel using SDM Objective Scenario Topology In this lab, the students will complete the following tasks: Prepare to configure Virtual Private Network (VPN)

More information

CCT vs. CCENT Skill Set Comparison

CCT vs. CCENT Skill Set Comparison Operation of IP Data Networks Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs Select the components required to meet a given network specification

More information

Configuring WAN Failover with a Cisco 881 Router and an AirLink ES440

Configuring WAN Failover with a Cisco 881 Router and an AirLink ES440 Configuring WAN Failover with a Cisco 881 Router and an AirLink ES440 When the AirLink ES440 is combined with a third-party router, the combined solution supports business continuity by providing primary

More information

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE)

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE) Network Setup Guide 1 Glossary 1.1 Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service Provider) means

More information

Transparent Firewall/Filtering Bridge - pfsense 2.0.2. By William Tarrh

Transparent Firewall/Filtering Bridge - pfsense 2.0.2. By William Tarrh Transparent Firewall/Filtering Bridge - pfsense 2.0.2 By William Tarrh Version 2 February 6, 2013 1 Transparent Firewall/Filtering Bridge - pfsense 2.0.2 This how to is an updated version of Trendchiller

More information

Using a VPN with Niagara Systems. v0.3 6, July 2013

Using a VPN with Niagara Systems. v0.3 6, July 2013 v0.3 6, July 2013 What is a VPN? Virtual Private Network or VPN is a mechanism to extend a private network across a public network such as the Internet. A VPN creates a point to point connection or tunnel

More information

Lab Configuring Syslog and NTP (Instructor Version)

Lab Configuring Syslog and NTP (Instructor Version) (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Objectives Device Interface IP Address Subnet Mask

More information

STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM

STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM Verizon High Speed Internet for Business Verizon High Speed Internet for Business SETTING UP YOUR NEW STATIC IP CONNECTION AND IP ADDRESS(ES) This

More information

Welcome to Todd Lammle s CCNA Bootcamp

Welcome to Todd Lammle s CCNA Bootcamp Welcome to Todd Lammle s CCNA Bootcamp Todd Lammle Cisco Authorized CCNA Bootcamps are now available, delivered by CCSI instructor, and popular Sybex author Todd Lammle. Todd Lammle CCNA Training Boot

More information

Securely manage data center and network equipment from anywhere in the world.

Securely manage data center and network equipment from anywhere in the world. LES1516A LES1532A LES1548A Secure Server with Cisco Pinout Securely manage data center and network equipment from anywhere in the world. To download the user manual, this quick start guide, and software

More information

PassTest. Bessere Qualität, bessere Dienstleistungen!

PassTest. Bessere Qualität, bessere Dienstleistungen! PassTest Bessere Qualität, bessere Dienstleistungen! Q&A Exam : JN0-314 Title : Junos Pulse Access Control, Specialist (JNCIS-AC) Version : Demo 1 / 6 1.A customer wants to create a custom Junos Pulse

More information

Configuring a Cisco 2509-RJ Terminal Router

Configuring a Cisco 2509-RJ Terminal Router created by: Rainer Bemsel Version 1.0 Dated: Dec/08/2012 For my Cisco LAB, I ve purchased a used Cisco 2509-RJ with RJ45-RJ45 roll-over cables. This TechTip shows my configuration setup, so you can easily

More information