IN,VOVATION AND INCUBA0N Ref No:- IIT/SIICIRFID/bv/6.06.204 Date:- 6.06.204 Due Date: -28.07.204 To, MJS. REQUEST FOR QUOTATION "Combined Central Solution for RFID based Asset Tracking System, RFID based Theft Prevention System & RFID based Access Control System" Scope: SIIC, lit Kanpur, invites RFQ from vendors for installation and Implementation of a web based RFID based Asset Tracking System, RFID based Theft Prevention System & RFID based Access Control System. The objective of the system is to provide a centralized Inventory tracking and Monitoring that is accessible within the facility across. The system should use RFID monitor and locate Assets. Give access? To authenticated person to take the asset outside of facility. All the Inventory and Assets including metal and non-metal items will be tagged with RFID tags. Scanning gantry readers to be installed in each door, main entry and exit locations to scan movement of assets. The camera system should give an image I short video frame for the unauthorized move out of the premises. Also RFID enabled hand-held readers to be used for location scanning and auditing the assets. All the movements and master data to be maintained and accessible in a web based system that is accessible to SIIC, lit Kanpur employees only. The system should be easy to operate and scalable for future expansion into other centers. General Terms & Condition (A): Sealed Quotations (technical bid and price bid separately sealed) should be provided 28.07.204. 2 Quotation should have minimum validity of 60 days from the date of opening. 3 All prices are to be for SIIC, lit Kanpur. 4 The total cost of the equipment in terms of CIP Kanpur should be clearly mentioned. 5 Terms of warranty and guarantee should be explicitly mentioned. 6 Packing and delivery charges, customs and clearance duty should be clearly stated (if any). 7 Payment Terms: 90% against delivery of materialo% after approval. In case of foreign currency payment is through LC. 8 The Cover should be sealed and super scribed "Combined Central Solution for RFID based Asset Tracking System, RFID based Theft Prevention System & RFID based Access Control System for SIIC lit Kanpur". Enquiry No. IIT/SIIC/RFID/bv/6.06.204 Dated : 6.06.204 Due Date: 28.07.204 9 Maximum educational discounts should be applied. 0 The Institute is exempted from excise duty and we pay only a nominal customs duty of about 5% under Govt. of India notification 5/96. SlOB/INNOVATION AND INCUBATION CENTRE,, KANPUR-20806 Phones: 9-52-2597057/2597979{0) Fax: 9-52-259677
SIDBIINNOVATION AND INCUBATION CENTRE INNOVAffONAND INCUBAfiON Goods shall not be supplied without an official Work/Purchase/Supply Order. 2 Local firms: Quotations should be for free delivery to this institute. If quotations for ex-godown delivery charges should be indicated separately. 3 Firms outside Kanpur or Uttar Pradesh: Quotations should be for F.O.R. Kanpur. If F.O.R. consignor station, freight charges by passenger train I lorry transport must be indicated. If ex-godown, packing, forwarding and freight charges must be indicated. 4 The firms are requested to give detailed description and specifications together with detailed drawings, printed leaflets, and literature of the article quoted. 5 The name of the manufacturers and country of manufacturer should be clearly stated. In the absence of these particulars the quotation is liable, to be rejected. 6 Your quotation should contain Authorization Letter from manufacturer. 7 All manufacturers/agents must submit the compliance sheet (any deviation must be clearly mentioned) 8 The quotation should include training for two persons at SIIC, lit Kanpur within two months of installation and commissioning of the equipment. Local 24X7 service and support office is preferred. 9 Made in India, hardware & software product will be given preference. 20 Comprehensive AMC for 5 years need to be provided along with the quote. 2 SIIC, lit Kanpur has the right to accept the whole or any part of the tender or portion of the quantity offered or reject it in full without assigning any reason. Eligibility Criteria (B):. The company should register in India minimum from last 5, Certificate of Incorporation need to be provided. 2. The company should be profit making any 3 years from the date of incorporation. Chartered Accountant's Certificate to be enclosed. 3 Should have deployed RFID Systems. 4 The vendor should have executed at least one single RFID project using UHF technology worth a minimum of Rs.SO lakhs (fifty lakhs only) and above (Proof of purchase order and proof of successful completion of the project to be submitted to our office). 5 The vendor should have executed at least three single RFID project using UHF technology worth a minimum of Rs.20 lakhs (fifty lakhs only) and above (Proof of purchase order and proof of successful completion of the project to be submitted to our office). 6. The vendor should have provided at least 0 lakhs units of tags till date. 7 The company should able to show the software as demo, if required during the evaluations. SIDBIINNOVATION AND INCUBATION CENTRE,, KANPUR-20806 Phones: 9-52-2597057/2597979{0) Fax: 9-52-259677
INrVO\IATfON AND INCUIJA0N ~roduct Detaii_S (C): Specifications for RFID Based Asset Tracking System (C): Sl. No. Product Name Specification (SIIC Main) Frequency Range 865-867 MHz RF Output Power 20-3 0dBm (maximum 4W ERP) RFID UHF Tag Air Interfaces EPC Class Gen 2 Portable Hand-. Communication RS232, (Biuetooth Class2 2 Held Reader Interface V.), USB communication module, WI Fl. Operating System True Read Distance -2 Meter. Frequency Range 865-867 MHz RF Output Power 0-30dBm (maximum 4W ERP) UHF RFID Tag Air Interfaces ISO 8ooo-6C, EPC Class Gen 2 2. Integrated Fixed Communication LAN TCP/IP ( Configurable to use 22 Reader Interface fixed I P address or DHCP)/ POE 3 UHF RFID 2-Port Reader Read Distance Frequency Range RF Output Power (Power Over Ethernet) 8-0 Meters. 865-867 MHz 20-30dBm (maximum 4W ERP) Tag Air Interfaces EPC Class Gen 2 Antennas 2 high performance, mono-static antenna ports Communication USB, TCP/IP, Rs-232 Interface GPIO 4 Input, 4 Output Power POE, External Adapter Read Range 5-8 meters Frequency Range 865-867 MHz RF Output Power Up to 27 dbm in db steps (for short range applications) 4 (maximum 4W ERP) UHF RFID POS Tag Air Interfaces ISO 8ooo-6C, EPC Class Gen 2 Reader Communication USB 2.0 Human Interface Interface Device (HID) or RS 232. Read & Write Up to Meter. Distance Integrated circuit (I C): EPC Class Gen 2 compliant UHF RFID passive Total memory : 52 bits 5 Asset Tags (for IT Operating frequency: 840-960 MHz 4000 & Non-IT Items) Read distance:-0 ft- 5ft (3m - 5 m) Ingression Protection: I P 68 - SlOB/INNOVATION AND INCUBATION CENTRE,, KANPUR 20806 Phones: 9-52-2597057/2597979{0) Fax: 9-52-259677 e-mail: bvphani@iitk.ac.in web: www.iitk.ac.in/siic http://home.iitk.ac.in/~bvohanil (SIIC Ext.) 32 8 3000
IN,VOVA TlON AND INCUH.ATIOtV 6. 7- High-End Central Server Middleware (Central Controller) Write Cycles:- oo,ooo Dimensions: - Suitable for the specified Assets. Specification: Int el Core is- 3470 with Intel HD Graphics 2500 (3.20GHz, 6 MB cache, 4 cores), 4GB 600 MH z DDR3 SDRAM, 500GB 72 0orpm SATA 3.0Gb/s SATA, Super Multi 2 DVD writer wit h licensed Windows 7 professiona l OS and MS SQL /MySQL Database Software. Central Application responsible for managing hardware event notifications. Can co nnect to multiple rfid Read ers from multiple vendors (Some customization requ ired). Very robust and scalable. Can connect t o other applications like ( ERP, SAP etc). Features: Organizational Management User Management Vendor Management Ass et Management Tag Registration Tagging Asset Tracking Asset Auditing 8. Application Asset Maintenance Notifications Software Reports 2 - Technology language DATABASE Application Type Application Architecture Java, J2 EE/PH/ASP/.N ET MYSQL/Open Source Web Application working on LAN or lnte N-Tire Architecture SlOB/INNOVATION AND INCUBATION CENTRE,, KANPUR-20806 Phones: 9-52-2597057/2597979(0) Fax: 9-52-259677
SIDBIINNOVATION AND INCUBATION CENTRE h\n#jva TION AND INCUBA UON Specifications for RFID Based Theft Control System (C2): Sl. Product Name Specification No. {SIIC Main) {SIIC Ext.) Sensor: /5" Co lor CMOS Sensor Video Resolution: 280x720 {Mega Pixels) Image Compression: MJPEG Image Frame Rate: 5 FPS (VGA), 30FPS (QVGA) Image Resolution: 640 x 480(VGA), 320 x 240(QVGA) Lens: f: 3.6mm, F: 2-4 (IR Lens) Lens Type: 4-9MM Zoom Lens Mini illumination: 0.5 Lux Viewing Angle: 6o Degree Pan/Tilt Angle: Horizontal: 360 & Vertical: goo Dome IP Camera Infrared Light: 22 IR LEDs, Night visibility up to 20 Mete w ith 360 degree Wireless Sta ndard: IEEE 8o2.b/g. view angle and Wireless Standard: 8o2. b:mbps (max.) 8o2.g: 6 6 night vision 54Mbps (max.) features 2. HF RFID Reader Wireless Security: 64/28-bitWEP Encryption Server: P2P Server/ DDNS server Ethernet: one 0/ oombps RJ -45 Supported Protocol: HTTP/DHCP/ P/TCP/U D P/FTP/SMTP/DDN S/PPoE/U PnP Supported OS: Microsoft Windows XP/Vista/Windows? Power Consumption: 5 Watts Operate Temper: 0-55oC (4 F'"'-' 22 F) Operating Humidity: 20%- 85% non-condensing Storage Temper: -0 C - 60 ( 4 F '"'-'40 F) Storage Humidity: o%- go% non-condensing AI R-lnterface Protocols Tag Supported Frequency Working Range ISO/IEC 4443A or ISO/IEC 5693 {Mifare K, Mifare 4K, Mifare Ultra-light, Mifare Labels, FMRFo8 (SHC02 ISO/ IEC 4443A)} or {I-CODE SLI, TagltTM} High Frequency band 3.56 MHz Ideal range: Up to 00mm depends upon the TAG Operating Windows 32 Operating System System Support Compatibility Communication Ethernet Protocol Host Interface Connectivity Communication Parameters Antenna Type LAN (RJ -45 Connector) Baud rate 96, oo-5,200 Bps Built-in Antenna 3 SIDBIINNOVATION AND INCUBATION CENTRE,, KANPUR-20806 Phones: 9-52-2597057/2597979{0} Fax: 9-52-259677
INNOVATION AND INCUBATION 3 Buzzer Alarm with caution red light Any standard buzzer & Light suitable to attached with RFID Reader. 2 2 Features: IP camera Management Notification (Via Alarm & Light) Reports 4- Technology Application Software Language Java, J2EE/PH/ASP/.NET DATABASE MYSQL/Open Source Application Web Application working on LA Type Internet Application N-Tire Architecture Architecture Specifications for Bio-metric Finger Print Reader Based Access Control System (C3): Sl. No. Product Name Bio-Metrics Specification Sensor Type: Optical Resolution: 500 DPI (SIIC Main) Registration and Matching: Fingerprint. Finger Print 25 Reader ERR (Equal Error Rate):< 0. % Communication: RS232/485, TCP/ IP Power: DC 9-30V, A Door Locking System: Voltage Input : 2 VDC/ 24 VDC Current Draw: 2V I 320mA; 24V I 6omA (±5%) Holding Force: 300Lbs I 6oo lbs Hall Effect Contact: SPOT rated 2A at 24 VDC Anti-Rust Surface Treatment: Blue Zinc Plating Electronic Door Operating Temperature: o-55 C ( 32-3 F) Operating Humidity: 0-95% (non condensing) 2. Locking System 25 with Controller Dedicated Door Controller: CPU: 700 MHz Memory (SDRAM): 256MB O.S: Linux Communication: USB, TCP/IP/LAN Controllers: Reader, Door Lock, Internal Switch for lock release. Power: Power: 700mA at 5V Features: 3- Application Software Organizational Management User Management Tag Registration/Assignment Organizational Position/ Role Assignment {SIIC Ext.) 32 32 SIDBIINNOVATION AND INCUBATION CENTRE,, KANPUR-20806 Phones: 9-52-2597057/2597979(0) Fax: 9-52-259677
INNOVATION AND INC:UBA70N Not ificat ions Reports Technology Language DATABASE Application Type Application Architecture Java, J2EE/PH /ASP/.NET MYSQL/Open Source Web Application working on LAN or N-Tire Architecture (J ~ r-pt!:' - Coordinator SIDBIINNOVATION AND INCUBATION CENTRE,, KANPUR-20806 Phones: 9-52-2597057/2597979{0) Fax: 9-52-259677 e-mail: bvphani@iitk.ac.in web: www.iitk.ac.in/siic http://home.iitk.ar.in/nhvnhnnil