; DRG; MF Service Schedule & Consumables / / Service & Maintenance Schedule - FAME in Jet Fuel () IP 583; ASTM D7797 Every Test 6 Monthly 12 Monthly Verify instrument operation using one verification solution: SA5021-0 Verification Material 100mg-kg, 100ml SA5020-0 Verification Material 30mg-kg, 100ml SA5021-0 Verification Material 100mg-kg, 100ml - FAME in Distillate & Residuals () ASTM D7963 Verify instrument operation using one verification solution: SA5122-0 Verification Material 400mg-kg, 100ml SA5122-0 Verification Material 400mg-kg, 100ml SA5123-0 Verification Material 900mg-kg, 100ml - FAME in Multifuels () IP 583; ASTM D7797; ASTM D7963 Verify instrument operation using ONE verification solution: SA5021-0 Verification Material 100mg-kg, 100ml SA5020-0 Verification Material 30mg-kg, 100ml SA5021-0 Verification Material 100mg-kg, 100ml SA5122-0 Verification Material 400mg-kg, 100ml SA5123-0 Verification Material 900mg-kg, 100ml NOTE: Instruments should be calibrated in the event of a verification failure. 1 t: +44 (0) 1932 564391 f: +44 (0) 1932 568363 e: sales@stanhope-seta.co.uk www.seta-analytics.com
Spares & Consumables START UP KITS SA5001-0 FIJI IP 583 Starter Kit 1 box of Low Lint Wipes (280 wipes) 50ml Beakers (10) Cartridges (10) Filters (10) Verification Material 30 mg-kg (1) Verification Material 100 mg-kg (1) SA5101-0 FIJI ASTM D7963 Starter Kit 1 box of Low Lint Wipes (280 wipes) 50ml Beakers (10) Cartridges (10) Filters (10) Verification Material 100 mg-kg (1) Verification Material 900 mg-kg (1) SA5201-0 FIJI IP 583-ASTM D7963 Starter Kit 1 box of Low Lint Wipes (280 wipes) 50ml Beakers (10) Jet Fuel Cartridges (10) Distillate & Residual Cartridges (10) Filters (10) Verification Material 30 mg-kg(1) Verification Material 100 mg-kg (1) Verification Material 900 mg-kg(1) NOTE: Each Verification Material has a shelf life of 6 months from date of manufacture CONSUMABLES SA5028-0 Extender Diluent, 500ml SA5029-0 Extender Diluent, 5L SA5030-0 Extender Diluent 20L SA5003-0 FIJI Box Low Lint Wipes (Box of 280) SA5004-050 FIJI Beakers 50ml (50 off) SA5004-100 FIJI Beakers 50ml (100 off) SA5005-100 FIJI IP 583 Cartridges (100 off) Cartridge and Filters included SA5105-100 FIJI ASTM D7963 Cartridges (100 off) Cartridge and Filters included NOTE: For Jet Fuel testing the FIJI IP 583 Cartridges should be used and for Distillate & Residual testing the FIJI ASTM D7963 Cartridges should be used. 2 t: +44 (0) 1932 564391 f: +44 (0) 1932 568363 e: sales@stanhope-seta.co.uk www.seta-analytics.com
CALIBRATION SA5025-0 FIJI IP 583 Calibration Material Set 30, 75, 100, 125, 150 mg-kg SA5125-0 FIJI IP 583-ASTM D7963 Calibration Material Set 30, 75, 100, 125, 150, 300, 500, 800, 1000 mg-kg SPARES 05 Fuse 01 Sample Probe Assembly 02 Waste Probe Assembly REPAIRS & MAINTENANCE 03 Pump and Bracket Sub Assembly 04 Pump PCB Stepper Control Board M3 Spring Washers M3 x 6 Pozi Screws 06 Flowcell & Manifold Flowcell (1) Manifold (1) Quick Connect Fittings (4) Fittings 07 Manifold Block with Valves Manifold (1) Quick Connect Fittings (4) M5 Dowty (1) M5 x 6 Pozi Screw (1) M3 Dowty (1) M3 x 6 Pozi Screw (1) Solenoid Valve (3) Flow Cell Manifold Bracket (1) Grommets (4) M4 x 50 Pozi Screws (2) M4 Plain Washer (5) M4 x 8 Pozi Screws (3) M4 Spring Washers (3) t: +44 (0) 1932 564391 f: +44 (0) 1932 568363 e: sales@stanhope-seta.co.uk www.seta-analytics.com 3
REPAIRS & MAINTENANCE 08 Solenoid Valves (3) 09 Monitor SA5100-209 Monitor SA5200-209 Monitor 10 Main PCB ENGINEERING SERVICE KIT SA5016-0 FIJI IP 583 Engineering Service Kit Sample Inlet / Outlet Tubes Replacement Tubing Button Housing (Ring Seal, Dowty Seal M5, Quick Connect Fitting) Manifold (Solenoid Valve, Dowty Seal M5, Dowty Seal M3, Dowty Centre & Quick Connect Fitting) Verification Fluid 30 mg-kg Verification Fluid 100 mg-kg SA5116-0 FIJI IP 583-ASTM D7963 Engineering Service Kit Sample Inlet / Outlet Tubes Replacement Tubing Button Housing (Ring Seal, Dowty Seal M5, Quick Connect Fitting) Manifold (Solenoid Valve, Dowty Seal M5, Dowty Seal M3, Dowty Centre & Quick Connect Fitting) Verification Fluid 30 mg-kg Verification Fluid 100 mg-kg Verification Fluid 400 mg-kg Verification Fluid 900 mg-kg NOTE: Engineering Service Kits should only be used by trained authorised engineers. 4 t: +44 (0) 1932 564391 f: +44 (0) 1932 568363 e: sales@stanhope-seta.co.uk www.seta-analytics.com
UPGRADE KITS SA5150-0 FIJI Distillate & Residual Upgrade ASTM D7963 USB Keyboard (1) Upgrade software (memory stick) FIJI ASTM D7963 Calibration Set: 30, 75, 100, 125, 150, 300, 500, 800, 1000 mg-kg Verification Material 30 mg-kg Verification Material 100 mg-kg Upgrade Instructions SA5050-0 FIJI Jet Fuel Upgrade for IP 583 & ASTM D7797 USB Keyboard (1) Upgrade software (memory stick) FIJI ASTM D7963 Calibration Set: 30, 75, 100, 125, 150, 300, 500, 800, 1000 mg-kg Verification Material 30 mg-kg Verification Material 100 mg-kg Upgrade Instructions NOTE: Upgrades can be performed in the field and do not need to be returned to the factory. ANNUAL SERVICE SA5015-0 FIJI IP 583 Annual Service Kit Sample Inlet Assembly Sample Outlet Assembly Ring Seal Verification Material 30 mg-kg Verification Material 100 mg-kg Service Instructions SA5115-0 FIJI IP 583-ASTM D7963 Annual Service Kit Sample Inlet Assembly Sample Outlet Assembly Ring Seal Verification Material 30 mg-kg Verification Material 100 mg-kg Verification Material 400 mg-kg Verification Material 900 mg-kg Service Instructions NOTE: Both Annual Service Kits can be used by either trained engineers or end users. Contact Information TECHNICAL SUPPORT E: Bertram Thompson service@stanhope-seta.co.uk T: 01932 564391 W: www.stanhope-seta.co.uk/support ORDERING E: sales@stanhope-seta.co.uk T: 01932 564391 W: www.stanhope-seta.co.uk t: +44 (0) 1932 564391 f: +44 (0) 1932 568363 e: sales@stanhope-seta.co.uk www.seta-analytics.com 5