HP Netserver/Server Server Management Reference Guide HP Part Number 5971-4562 Printed January 2002
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Alert on LAN is a trademark and Wake on LAN is a registered trademark of International Business Machines Corporation. CA, TNG, and Unicenter are registered trademarks of Network Associates Inc. Microsoft and MS-DOS are U.S. registered trademarks of Microsoft Corporation. Windows and Windows NT are trademarks of Microsoft Corporation. NetView is a trademark of Tivoli Systems. Novell and NetWare are registered trademarks of Novell, Inc. pcanywhere is a trademark of Symantec Corporation. SCO is a registered trademark of the Santa Cruz Operation, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. All other brand and product names are trademarks of, and are used to identify products of, their respective owners. Hewlett-Packard Company Network Server Division Technical Communications/MS 45SLE 10955 Tantau Avenue Cupertino, CA 95014-0770, USA Copyright 2002, Hewlett-Packard Company. ii
Contents Contents 1 HP Netserver/Server Management Tools: What s Available?... 1 Hardware Monitoring and Troubleshooting... 1 Hardware Management Feature List... 2 Remote Server Management... 3 Remote Management Feature List... 4 Integration to Enterprise Management Platforms... 5 2 Server Management Tools Installation... 7 Small Business Environment... 7 Mid to Large Business Environment... 8 iii
Contents iv
1 HP Netserver/Server Management Tools: What s Available? HP Netserver/Server management strategy allows administrators to pick and choose the tools to manage their hardware, software and networks. Administrators may choose HP Toptools to manage hardware level issues. As needs change, network administrators may also leverage high-level enterprise system management platforms such as OpenView NNM, Computer Associates Unicenter TNG, Tivoli Enterprise Management and NetView. In this guide, you will find a brief description of the tools available to manage HP Netservers and Servers, an overview on how these tools are installed, and where the software and documentation are located. Hardware Monitoring and Troubleshooting The HP Toptools suite of software is included on CD-ROM with every L and E Series Netserver and HP Servers such as tc3100 and tc6100. It should be installed to help you and your support provider monitor and troubleshoot your system. If you want the latest available version of HP Toptools, you may also download software and documentation from the Toptools website at: http://www.hp.com/toptools HP Toptools Device Manager is web-based management software designed to use a web server (a PC or server designated as the management server) to manage your networked devices (HP servers, desktops, notebooks, hubs, switches, and printers) from a single, easy-to-use interface. Information about your managed devices are served up on web pages that may be viewed from any PC client via a browser. HP provides automated discovery as well as consolidated alerts for all systems being managed. The Server component of HP Toptools Device Manager, in conjunction with Netserver/Server Agents, provides remote administration and monitoring of critical server components for quick troubleshooting and proactive management. HP Netserver/Server Agents software utilizes SNMP and DMI to monitor and pass on real-time information about server processors, memory, storage, network interface cards and other components in the system to a management console. Netserver/Server Agents are required on each server being managed by Toptools Device Manager and/or Toptools Auto Alert. Netserver/Server Agents are available for Netservers/Servers running Microsoft Windows NT, Windows 2000, Novell NetWare, and Linux. 1
Chapter 1 HP Netserver Management Tools: What s Available? Included with the Netserver/Server Agents software is Automatic Server Restart (ASR) which can reboot your server in the event of a system hang. HP Instant Toptools is a stand-alone, simple tool used to manage a single server. Instant Toptools provides a subset of information available through Toptools Device Manager and may be installed without installing the Netserver/Server Agents. Instant Toptools may be accessed from a PC client browser. Instant Toptools is ideal for administrators that may have a small number of servers to support or have contracts with support providers who have network or direct access to the server. Instant Toptools is currently only supported on Netservers/Servers running Microsoft Windows NT or 2000, Linux, and Netware. HP Toptools Auto Alert is a Windows application that runs on one or more designated management consoles. Toptools Auto Alert, in conjunction with Netserver/Server Agents, provides up/down status of servers, proactively notifies you of server events and provides advice on what to do when a problem occurs. Toptools Auto Alert may be used in conjunction with Instant Toptools or Toptools Device Manager (with the Server component). Hardware Management Feature List The table below lists the capabilities of each component of the HP Toptools software suite provided with your HP Netserver/Server. This list may vary depending on your Netserver/Server model, installed NOS and installed accessories. For more details, see the "HP Netserver Management Products" datasheet on the Netserver website (www.hp.com/go/netserver). Feature Description Instant Toptools Environment Manage multiple devices (device auto discovery, centralized event log) Manage a single server at a time Toptools Auto Alert Toptools Device Manager Access Over the network Status Info Utilization (CPU, Memory, NIC) Event Info Storage capacity and history Proactive notification of events at management console(s) Single event log Component-specific event logs: mass storage, memory, critical system hardware, power supplies) Memory events Mass storage events 2
Chapter 1 HP Netserver Management Tools: What s Available? Feature Description Instant Toptools System Hardware events and POST error notification Toptools Auto Alert Toptools Device Manager Power Supply events Other events (NIC, Disk Array, Tape Drive, UPS) Predictive events (mass storage, memory power supply) * * Configuration Serial number System information Mass storage Memory Network Interface Cards (NIC) System I/O Firmware versions Software versions Driver versions Reports Printable summary report Configuration change report E-mail reports Wizards Hard drive locator Hard drive firmware update/repair Memory locator * When using Instant Toptools, these events can only be captured if Netserver/Server Agents are installed and running on the server being monitored. Remote Server Management In addition to HP Toptools, each HP Netserver/Server system includes remote management tools that provide you with access to your HP Netserver/Server regardless of the system state. Integrated Remote Assistant, included on L-Series and the newer tcxxxx HP Servers, offers emergency modem access to the server. It can page you when a problem arises and allow you to access the system event log, redirect the console to your location, and even power cycle the server. Alert On LAN 2 (AOL2) and Wake On LAN (WOL), included with rc3100 and rc4100 series servers, allows an administrator to power on, power off, power 3
Chapter 1 HP Netserver Management Tools: What s Available? cycle, or reset their server via a Windows or DOS client attached to the network. When used in conjunction with the Integrated RA, this option provides an administrator with a diverse suite of powerful remote management tools. Toptools Remote Control Card PCI accessory offers much of the same functionality as Integrated RA, but extends this by offering emergency access over the network with an easy-to-use web interface. Supported only for L-Series Netservers that include the Intelligent Platform Management Interface (IPMI). It can notify you when a problem arises via a page or email and allows you to access the system event log, redirect the console to your location, and even power cycle the server. In addition, it integrates fully with HP Toptools Device Manager and allows you to set configurations and user account information on several cards at once. Remote Console feature, included on most E-Series Netservers, allows remote dial-in and control of the server either via console redirection or access to utilities and diagnostics available on the server s HP Utility Partition. Symantec pcanywhere remote control software is included with most E and L Series Netservers. This solution provides Netservers/Servers running Microsoft Windows NT or 2000 full Windows graphics console redirection over the network or modem to a remote console. Remote Management Feature List The table below lists the capabilities of each remote management offering. This list may vary depending on your Netserver/Server model, installed NOS and installed accessories. For more details, see the "HP Netserver Management Products" datasheet (under Information Library Datasheets) on the Netserver website (www.hp.com/go/netserver). Feature Description Toptools Remote Control Access Remote access via the network Integrated RA Remote Console Feature Remote access via a modem Secure access to server in all system states Notification Pager Troubleshooting E-mail SNMP to management console (LAN) Access to server event log HP Utility Partition access * Online memory diagnostics 4
Chapter 1 HP Netserver Management Tools: What s Available? Feature Description Toptools Remote Control Remote Control Integrated RA Last screen saved on system hang Remote Power-Cycle/up/down ** Automatic graceful shutdown on critical event Remote configuration Remote file transfer Server boot off of remote disk image Remote BIOS and firmware update Remote Console Feature Text Console Redirection Graphics Console Redirection using pcanywhere (NT & 2000) Security Encrypted password Toptools Integration Role-based access Dialback-modem Auto logoff if no activity (5 min) Remote actions may be performed on one or more servers via Toptools Device Manager * The HP Utility Partition contains off-line configuration and diagnostic tools and may be installed from the HP Netserver Navigator CD. ** AOL2 and WOL included with the LP 1000r and LP 2000r allow this feature to also be done over the network. Integration to Enterprise Management Platforms IT departments who wish to manage their entire network infrastructure from a common set of tools select an Enterprise Management Platform, such as HP OpenView Network Node Manager, Computer Associate s Unicenter TNG, or Tivoli Enterprise Management and NetView. These solutions allow the IT manager to manage IT resources from end to end and provide the control to make service level agreements with end user departments. HP Netservers/Servers are easily managed by these management platforms because Toptools integrates into those platforms. The software that "bridges" Toptools to many top enterprise management platforms is available from the web at www.hp.com/toptools. Once the integration software is installed, features include: l auto discovery of Netservers/Servers, Vectras, and other HP hardware 5
Chapter 1 HP Netserver Management Tools: What s Available? l launching of Toptools for drill down troubleshooting l detailed hardware inventory information l hardware alerts with text descriptions 6
2 Server Management Tools Installation The follow sections describe typical installations. Choose the environment that suits your needs. Small Business Environment To manage servers on a small network with no dedicated web servers. Management Console (PC running Windows NT, 95, 98, ME, or 2000) Install/Configure: HP Toptools Auto Alert Software: HP Toptools CD under \Servers\AutoAlrt, or the HP Netserver Navigator CD under Manage\Console\Autoalrt, or the HP website at www.hp.com/toptools. Documentation: Online guide available on the HP Toptools CD under \Manuals\Servers, or the HP Netserver Documentation CD, or the HP website. E or L Series Netserver to be Managed Install/Configure: SNMP Service (NT and 2000 servers only) Software: Microsoft Windows CD. Netserver/Server Agents (includes Instant Toptools) * Software: HP Netserver Navigator CD under \Manage\Server, or the HP website at www.hp.com/toptools. Documentation: Online guide available on the HP Netserver Documentation CD (also see the HP Toptools Auto Alert online guide). E-Series Remote Console feature or L-Series Integrated RA Software: HP Netserver Navigator CD. Documentation: Remote Administrator online guide available on the HP Netserver Documentation CD. * Netserver/Server Agents and Instant Toptools can be installed either at each server, or pushed over the network from a network client. Instant Toptools does not need Netserver/Server Agents to work, but does need them to receive additional system I/O, storage, predictive, and NIC events. 7
Chapter 2 Server Management Tools Installation Mid to Large Business Environment To manage Netservers/Servers, PCs, and network devices on a LAN or WAN. Management Console (PC running Windows NT, 95, 98, ME, or 2000) Management Server (Server or PC running Windows NT or 2000) Install/Configure: HP Toptools Auto Alert Software: HP Toptools CD under \Servers\AutoAlrt, or the HP Netserver Navigator CD under Manage\Console\Autoalrt, or the HP website at www.hp.com/toptools. Documentation: Online guide available on the HP Toptools CD under \Manuals\Servers, the HP Netserver Documentation CD, or the HP website. Other management software * Install/Configure: SNMP Service (NT and 2000 servers only) Software: Microsoft Windows CD. HP Toptools Device Manager (with Server component) Software: Installed from the Toptools CD or HP website at www.hp.com/toptools. Documentation: Online guide available on the Toptools CD under \Manuals or the HP website. or E Series Servers to be Managed Install/Configure: SNMP Service (NT and 2000 servers only) Software: Microsoft Windows CD. Netserver/Server Agents (includes Instant Toptools) ** Software: HP Netserver Navigator CD under \Manage\Server or HP website at www.hp.com/toptools. Documentation: Online guide available on the HP Netserver Documentation CD (or refer to HP Toptools Auto Alert documentation). Remote Console feature Software: HP Netserver Navigator CD. Documentation: Remote Administrator online guide available on the HP Netserver Documentation CD. 8
Chapter 2 Server Management Tools Installation LC, LH, LPr, LTr, tcxxxx, and rcxxxx Series Servers to be Managed Install/Configure: SNMP Service (NT and 2000 servers only) Software: Microsoft Windows CD. Netserver/Server Agents (includes Instant Toptools) ** Software: HP Netserver Navigator CD under \Manage\Server or HP website at www.hp.com/toptools. Documentation: Online guide available on the HP Netserver Documentation CD (or refer to HP Toptools Auto Alert documentation). Integrated Remote Assistant Software: HP Netserver Navigator CD. Documentation: Remote Administrator online guide available on the HP Netserver Documentation CD, including pcanywhere instructions (not included in T11, ST200, or G4 servers). AOL2 and WOL (available on LP 1000r and LP 2000r systems) Software: HP Netserver Navigator CD under \Manage\Console\aol_util. Documentation: Online guide available on the HP Netserver Documentation CD. HP Server Remote Management Card accessory (Not applicable to pre-lc 3 and pre-lh 3 systems.) Software: On Navigator CD with accessory. Documentation: With the accessory, or see the online guide available on the Netserver Documentation CD. 9
Chapter 2 Server Management Tools Installation LXr Series Servers to be Managed Install/Configure: SNMP Service (NT and 2000 servers only) Software: Microsoft Windows CD. Netserver/Server Agents (includes Instant Toptools) ** Software: HP Netserver Navigator CD under \Manage\Server or HP website at www.hp.com/toptools. Documentation: Online guide available on the HP Netserver Documentation CD (or refer to HP Toptools Auto Alert documentation). HP Server Remote Management Card accessory (Not applicable to pre-lxr 8000 systems.) Software: On Navigator CD with accessory. Documentation: With the accessory, or see the online guide available on the Netserver Documentation CD. * For information on integrating HP Toptools with management platforms such as HP OpenView Network Node Manager, CA Unicenter TNG, and Tivoli Enterprise Management and NetView, see the HP website at www.hp.com/go/netserver_mgmt. ** Netserver Agents and Instant Toptools can be installed either at each server, or pushed over the network from a network client. Instant Toptools does not need Netserver Agents to work, but does need them to receive additional system I/O, disk array storage, predictive, and NIC events. 10