Network Analysis and Troubleshooting Solutions Distributed Network Analyzer Platform

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Network Analysis and Troubleshooting Solutions Distributed Network Analyzer Platform Key Features Advanced protocol analysis and extensive diagnostic capabilities Troubleshooting and optimization of voice, video, data networks as well as 2G, 2.5G and 3G mobile networks Scaleable hardware platform can be combined with Signaling Analyzer software for mobile network testing or Network Analyzer software for fixed network testing Applications Functional and performance verification System integration Equipment interoperability testing Troubleshooting and monitoring Network optimization Testing triple play infrastructures Testing today s complex network infrastructures can be a daunting task. Distributed configurations, the ability to handle a wide and dynamic range of network protocols, and analysis of triple play services produce challenges. The scaleable JDSU DNA hardware platform provides the foundation of advanced protocol analysis. Take advantage of extensive diagnostic capabilities for troubleshooting and optimizing voice, video, data networks, as well as 2G, 2.5G and 3G mobile networks. Quickly solve next-generation network problems JDSU delivers unparalleled fixed and mobile network measurements for operators and equipment manufacturers who need to perform: Functional and performance verification System integration Equipment interoperability testing Troubleshooting and monitoring Network optimization Combine your DNA platform hardware with Signaling Analyzer software for mobile network testing, or with Network Analyzer software for fixed network testing. website: www.jdsu.com/test

2 DNA Platform The Distributed Network Analyzer (DNA) hardware platform brings greater power for collecting and analyzing real-time data over multiple technologies such as Ethernet, ATM, POS, Frame Relay, IPv6, MPLS, VoIP, IPTV, HSDPA, HSUPA, UMTS, GPRS, and CDMA. The scaleable DNA hardware platform provides the foundation of advanced protocol analysis architecture for fixed and mobile network applications when you perform performance verification, installation and maintenance activities. Couple the hardware with the Network Analyzer software application and you have a powerful wireline solution for LAN and WAN networks; couple the DNA platform with the Triple Play Analyzer software to perform IPTV, VoD and VoIP QoE analysis. Similarly, use the hardware in conjunction with Signaling Analyzer software to create an advanced mobile network analysis solution for 2G, 2.5G and 3G technologies. Choose the DNA hardware that best fits your needs. J6801B DNA J6802B DNA MX J6803B DNA PRO Integrated PC No. Requires external PC to operate Yes Yes Acquisition memory size 512 MB 256 MB 512 MB Real-time HW capture filters 32 (256 byte wide) 32 (256 byte wide) 32 (256 byte wide) Removable hard disk Uses external PC 120 GB 60 GB LIM hot-swapping Yes Yes Yes Power connections Option 1AC for AC Option 1DC for DC Option 1AC for AC Option 1DC for DC AC Time synchronization GPS, NTP, Control/Sych GPS, NTP, Control/Sych GPS, NTP, Control/Sych Maximum data capture rate 1 Gbps full duplex 1 Gbps full duplex 1 Gbps full duplex USB IO No 2.0 (two ports) 2.0 (two ports) Cell- and frame-based data processing ATM reassembly AAL 2/5 ATM reassembly AAL 2/5 ATM reassembly AAL 2/5 Software included (CD and single user license) Network Analyzer Software Network Analyzer Professional Edition Network Analyzer Professional Edition Rackmount kit Yes, J6772A Yes, included with J6802B NA Mobile network compatibility Software Run time store to media Wireline network compatibility Software Run time store to media Triple Play network compatibility Signaling Analyzer Suite up to 400 Mb/s Network Analyzer SW Application Suite up to 55 Mb/s Signaling Analyzer Suite up to 55 Mb/s Network Analyzer SW Application Suite up to 55 Mb/s Signaling Analyzer Suite up to 400 Mb/s Network Analyzer SW Application Suite up to 55 Mb/s Software suite Triple Play Analyzer Triple Play Analyzer Triple Play Analyzer

3 J6801B DNA The JDSU J6801B DNA achieves its small form factor and attractive price by excluding an integrated PC. Like the DNA MX and DNA PRO, the DNA accommodates a hot-swappable LIM. J6801B DNAs ship with a leatherette pouch which accommodates a DNA, laptop, and extra accessories. The J6801B supports up to 400 Mb/s RSTM (run-time stream to media) and contains 512 MB acquisition memory. GPS for time synchronization and a Control and Synch port ship standard. J6801B DNA Network under test Signaling Analyzer SW Network Analyzer SW Control a DNA locally or remotely from a separate PC or, use a DNA MX or DNA PRO to control the DNA. Other key features include line-rate capturing and run-time reassembly for AAL2 and AAL5. One or more DNAs can be added to create time-synchronized multi-port systems.

4 J6802B DNA MX The JDSU J6802B DNA MX ships with rackmount accessories. The product includes a removable hard disk and CD-RW drive and incorporates a built-in controller that hosts Network Analyzer software. The DNA MX accommodates a hot-swappable LIM. The J6802B DNA MX supports up to 55 Mb/s RSTM (run-time stream to media) and has 256 MB acquisition memory. For telemetry, choose between a single-port 10/100/1000 Mbps Ethernet card, dual-port 10/100/1000 Mbps Ethernet card or a combination 56 Kb/s Modem / 10/100 Mbps Ethernet card. J6802B DNA MX Network under test Signaling Analyzer SW Or Network Analyzer SW Signaling Analyzer SW When deployed into the network under test, use DNA MXs to perform distributed measurements at different points in your network. Access Network Analyzer software running on the DNA MX from a PC. While Network Analyzer software runs on the DNA MX, Signaling Analyzer software can be installed on the DNA MX or on a PC that accesses the instrument. Combine J6802Bs with DNAs, and/or DNA PROs to create multiport systems.

5 J6803B DNA PRO The J6803B DNA PRO offers the most advanced feature set in the DNA portfolio. The hardware includes a built-in controller and a removable hard disk drive. The JDSU DNA PRO also accommodates a hot-swappable LIM. The J6803B DNA PRO supports up to 400 Mb/s RSTM (run-time stream to media) and has 512 MB acquisition memory. Choose the telemetry option that best matches your application. Choices include a single-port 10/100/1000 Mbps Ethernet card, a combination 56 Kb/s Modem /10/100 Mbps Ethernet card, or WLAN 802.11a/b/g. J6803B DNA PRO Signaling Analyzer SW Or Network Analyzer SW Signaling Analyzer SW Network under test The DNA PRO hosts the Network Analyzer software for full protocol analysis and network testing. While Network Analyzer software runs on the DNA MX, Signaling Analyzer software can be installed on the DNA PRO or on a PC that accesses the instrument. Locally or remotely control the hardware from a PC. DNA PROs can be combined with other DNA PROs, DNAs, and DNA MXs.

6 Line Interface Modules (LIMs) Quickly make the physical connection between your network under test and the analyzer hardware using a LIM. LIMs provide link-layer connectivity to the data acquisition system embedded in DNA hardware. LIMs gather physical and link layer statistics, and provide run-time stream to media. As well, most LIMs contain the hardware resources to generate traffic for their associated network technologies (LAN, WAN, ATM). The type of LIMs available are: J6810B J6811A J6813B J6815B J6816B J6817B J6818A J6820B J6821A J6824A J6828A J6830A J6831A J6832A OC-3/OC-12 STM-1/STM-4 STM-1o/OC-3 with Opt-SC connectors E3/T3 (DS3) with BNC connectors T1/E1 with Bantam, RJ-45/RJ-48C connectors E1/T1 with DB-9, RJ-45/RJ-48C connectors E1 with BNC connectors ATM25 with RJ-45 connectors High-Speed V-Series (37-pin connector) HSSI (High-Speed Serial Interface) Eight-port T1/E1 with RJ-45/RJ-48C connectors Four-port STM-1/OC-3 LIM Multiplexer 10Base-T, 10/100Base-TX Ethernet 10/100Base-FX Ethernet (fiber interface) 1000Base-X (Gigabit) Ethernet (SX, LX, and TX interfaces) Most LIMs provide two input ports and two output ports allowing any of the following connection configurations: WAN Terminal Mode Provides line termination as an end-point terminal WAN Bridged Monitor Mode Uses both inputs and outputs of WAN LIMs for bi-directional monitoring at test access points; high input impedance should normally be selected WAN Monitor Jack Mode Uses both inputs of WAN LIMs only for bi-directional monitoring at protected monitor points WAN Monitor Through Mode Uses both inputs and outputs of WAN LIMs providing bi-directional repeater functionality plus bi-directional monitoring functionality. Each receiver input is terminated LAN Node Mode Uses an interface port of LAN LIMs to transmit and receive LAN Monitor Mode Uses both interface ports of LAN LIMs to monitor traffic passively between two devices DNA, DNA MX, and DNA PRO support a common set of hot-swappable LIMs.

7 Application Software for Mobile Network Testing Mobile Network Testing enabled by Signaling Analyzer software The J7830A Signaling Analyzer software, with its technology options, provides runtime analysis and troubleshooting of mobile networks. Use the software to quickly isolate a wide variety of problems. Signaling Analyzer software allows you to confidently perform: Sophisticated mobile system verification Advanced troubleshooting RAN optimization Distributed call trace Performance measurements Drill-down problem isolation Analysis on UMTS, GSM, mobile core, and CDMA RANs IMS, PSTN and internet testing All three DNA models can be used with the Signaling Analyzer software. The Signaling Analyzer software runs on an external PC connected to a DNA, or on the PC integrated in the DNA MX and DNA PRO. Take advantage of advanced capabilities found in the associated Signaling Analyzer software suite. Base Client Software (run-time and/or offline licenses) Signaling Analyzer Technology Options (run time and/or offline licenses) UMTS IMS CDMAOne/CDMA 2000 GSM/GPRS/EDGE SS7 Proprietary Protocols Contact JDSU for current availability Software Enhancements HSDPA HSUPA 3GPP Deciphering Demux and Channelization IMA Productivity Applications Multi User Server Call Manager Database Call Manager Client XML API UPA Export For more information on the Signaling Analyzer software, please consult the Signaling Analyzer Technical Overview document.

8 Application Software for Wireline Network Testing Wireline Network Testing enabled by Network Analyzer software Monitor network performance and gather statistical measurement data using the Network Analyzer software. All three DNA models can be used with the Network Analyzer software. The software runs on an external PC connected to a DNA, or on the PC integrated in the DNA MX and DNA PRO. The Network Analyzer software controls the data acquisition hardware. The flexible approach of the Network Analyzer software lets you: Solve network problems quickly and effectively Measure network utilization and error activity Test node activity over LAN and WAN interfaces with identical network and higher-layer measurement features Analyze VoIP and IPTV for triple play applications Analyze MPLS for troubleshooting converged networks Anticipate network problems using performance statistics and vitals Obtain comprehensive network statistics Decode 500+ protocols across all seven layers Test in IPv6 (or mixed IPv6 and IPv4) environments Take advantage of advanced capabilities found in the associated Network Analyzer software suite. Add-on software products available for use with Network Analyzer application which include: Switch Advisor Report Center RFC2544 Gigabit and 10/100 Ethernet Benchmarking MPLS Analysis ATM IMA, ML PPP, ML FR, ML HDLC License for J6824A Eight-Port E1/T1 LIM 3G UMTS W-CDMA Test Software Telephony Network Analyzer 3G CDMA2000 Test Software For more details on the Network Analyzer software, please consult the Network Analyzer Technical Overview document..

9 Application Software for Triple Play Testing Triple Play Testing enabled by Triple Play Analyzer software The JDSU J6900A Triple Play Analyzer is the most complete analysis and troubleshooting tool for network equipment manufacturers and communication service providers, who develop, install, monitor and troubleshoot voice, data and video applications. The analyzer provides accurate measurements of VoIP, IPTV and VoD QoE as well as channel zapping analysis. The analyzer helps customers realize faster time to market and decrease operational costs by passively testing any technology, over any interface, from anywhere and by anyone. The Triple Play Analyzer helps simplifying Triple Play Test complexity by automatically detecting voice, data and video applications and providing the key performance indicators that affect QoE. In today s time, development cycles are shorter and time to market is critical; reduce development and deployment time and get ahead in the new IPTV race supported by a solid platform for Triple Play testing. Measurements provided by the analyzer include: Combined signaling and media analysis for IPTV, VoD, VoIP and data Passive analysis and troubleshooting of user traffic at real-time Channel zapping latency and VoD commands analysis Video and voice MOS. QoE with transmission layer analysis, including MDI (Media Delivery Index) IPTV channels, VoD programs and voice calls statistics ETSI TR 101 290, PCR Jitter, Transport Stream statistics Extensive data network analysis

10 Local, Remote, and Distributed Use Models Increase the productivity of your network experts and minimize remote testing costs. DNA hardware incorporates a wide variety of access interfaces. DNA PRO and DNA MX support the ability to make a remote connection, start a measurement, drop the connection, and reconnect later to retrieve results. The Multi- User application enables the same ability for DNAs used with Signaling Analyzer software. Dispatched Distributed Drop-off/remote Local Take the analyzer with you to perform tests in your network locally. Remote attended/unattended When using the DNAs in local mode leave the equipment behind and go back to your office to perform remote analysis using a telemetry option. Distributed Install in central offices or network sites and connect remotely using Instrument Manager when you need to test the network. Operate under NTC with other DNA PROs and MX s for true distributed testing including RMON2 capability on LAN and WAN. VoIP Video Data Mobile

11 Direct Connect and Network Connect A flexible hardware architecture allows you to directly connect to a specific DNA, platform or any analyzer on the network. Direct Connect Connect a single DNA platform to the network under test and control it using a PC on which the application software is installed. Direct Connect Single Acquisition Signaling Analyzer Client Mobile Network DNA Direction connection of DNA hardware provides a straight forward means for run-time testing. Network Connect Call Manager Client 1 Multi-User Client 1 IP Network Call Manager Client n DNA Multi-User Client n MSC UE RNC SGSN NodeB Give multiple users simultaneous test capabilities using Multi-User and Call Manager applications.

12 Instrument Control Modes and Management Secure web browser-based control Control a DNA PRO or a DNA MX using a windows web browser from a standard PC using password-protected Secure HyperText Transfer Protocol (https). There is no need to have any Network Analyzer software installed in the client PC. With the wireless option for the DNA PRO, you can operate the analyzer from a wireless enabled PC. The Instrument Manager application can be downloaded from the DNA PRO or DNA MX into the client PC at any time via the PC s web browser. Instrument Manager Use Instrument Manager software to configure and control several remote DNA PRO or DNA MX platforms, with or without attached DNAs. Attached DNAs are seen as extra interfaces on the DNA PRO or DNA MX platforms. Discover a DNA PRO or DNA MX on a local subnet and discover any attached DNAs Add a DNA PRO or DNA MX from discovered list (instruments beyond the local subnet must be added by IP address) Allow a remote session to the desktop using remote desktop protocol Update software on multiple DNA PROs and/or DNA MXs simultaneously Display instrument status up (reachable)/down (not reachable)/locked (to a user) Configure DNA hardware (assigning hostnames, changing OS passwords, etc.) Get DNA status information such as LIM type DNAs can also be controlled and managed by using the Select Network Analyzer LIM feature, making a direct connection from Network Analyzer Software to remote DNA hardware.

13 Time Synchronization DNA hardware supports three types of time synchronization between multiple DNA platforms: GPS interface hardware and connectors NTP through an embedded NTP client Control/Sync cable (standard RJ-45 10/100 Ethernet cable) Global Positioning System (GPS) Each member of the DNA analyzer portfolio supports GPS time-synchronization. Using GPS, synchronize any number of these analyzers worldwide for time-correlated measurements. Standard interfaces are provided for the connection of an external GPS receiver. GPS provides an accuracy of ± 1 µs for LAN ± 5 µs for WAN/ ATM LIMs. Control & Sync In addition to the GPS time-synchronization capability, these analyzers have the JDSU Control & Sync technology hardware. Synchronize interconnected analyzers accurately via the same standard Ethernet cable that handles the TCP/IP/Ethernet control. Time-synchronize a daisy-chain of up to 10 DNAs in a 20 meter cable from a DNA PRO or from a DNA MX. Optionally, the first analyzer in a chain could also receive its timing from a GPS receiver, providing a very flexible time-synchronized test system that can be geographically distributed with unlimited number of DNAs. Control & Sync provides precision of ± 500 ns for LAN, 5 µs for WAN/ATM LIMs. Network Time Protocol (NTP) Synchronize a DNA via the Network Time Protocol (NTP) to an external NTP server using the Control & Sync In (Ethernet) port on each device. The J6802B DNA MX and J6803B DNA PRO operating systems can be time-synchronized via NTP to an external NTP server using the 10/100 Ethernet telemetry port. The acquisition system in the DNA MX or DNA PRO can, in turn, be synchronized to the DNA MX or DNA PRO operating system using NTP, with an NTP server running on the DNA MX or DNA PRO operating system. NTP provides an accuracy of ± 20 ms. Use the hardware s synchronization capabilities to time correlate measurements across interfaces and geographies.

14 Run-Time Store to Media (RTSM) Need to collect and analyze traffic over extremely long periods of time? DNAs incorporate a unique data streaming capability. In RTSM (run-time store to media) mode, the instruments export processed information in run time. The resulting information flow can be sent to a software application to be analyzed in run-time, or can be saved to storage for later analysis. The J6801B DNA, J6802B DNA MX and J6803B DNA PRO can stream to media up to 55 Mbps using the Control and Sync port. By utilizing a dedicated gigabit Ethernet port, the J6801B DNA and J6803B DNA PRO can stream up to 400 Mbps when using the Signaling Analyzer Multi-User software. RTSM port The dedicated Gigabit Ethernet port of the J6801B DNA and J6803B DNA PRO allows high performance streaming to media at run time. Telemetry Choose the telemetry options that best fit in your environment. J6801B DNA J6802B DNA MX J6803B DNA PRO 10/100 Mb/s Ethernet Standard Single-port 10/100/1000 telemetry port NA Option 001 Option 001 Combo 10/100/56k telemetry port NA Option 002 Option 002 Dual-port 10/100/1000 telemetry port. NA Option 003 Option 003 802.11 a/b/g Wireless LAN NA NA Option 202 for Europe Option 203 for Japan Option 204 for rest of world Each member of the DNA portfolio comes equipped with remote control capabilities.

15 Ordering Information Platforms J6801B J6802B J6803B Software J6840A J7830A J7831A J7833A J7834A Distributed Network Analyzer Distributed Network analyzer MX Distributed Network Analyzer PRO Network Analyzer Software Signaling Analyzer Run-Time Signaling Analyzer Multi-User Server Call Manager Database Call Manager Client For additional software information, refer to Signaling Analyzer technical overview and Network Analyzer technical overview.

Test & Measurement Regional Sales NORTH AMERICA TEL: 1 866 228 3762 FAX: +1 301 353 9216 LATIN AMERICA TEL: +1 954 688 5660 FAX: +1 954 345 4668 ASIA PACIFIC TEL: +852 2892 0990 FAX: +852 2892 0770 EMEA TEL: +49 7121 86 2222 FAX: +49 7121 86 1222 WEBSITE: www.jdsu.com/test Product specifications and descriptions in this document subject to change without notice. 2010 JDS Uniphase Corporation 30168070 500 0610 DNAPLATFORM.DS.NSD.TM.AE June 2010