Userdocumentation (04.0.05 for S v.6) Table of contents General description... Program menu... 4 Program settings... 5 4 Startscreen... 7 5 JumpStart... 8 6 Module FSX/PD Configuration... 0 7 Module Startdefinition... 8 Module FSX/PREPARD.cfg... 9 Module ScenerySet... 0 Module XML-Files... 5 Module SplashScreen... 6 Module User Logbook... 7 Tool Start Manager... 8 4 Tool Scenery Manager... 9 5 Tool Livery Manager... 0 6 Tool Manage profiles... 7 Tool Diff Manager... 8 Tool TextInfo Manager... 4 9 Tool Sort and Validate files... 5 0 Tool Clear [TRUSTED]... 5 Tool Show Airport in GoogleEarth... 5 Tool Google Earth Export... 6 Settings Manage ShortCuts... 7 4 Settings GoogleEarth Export... 8 5 Using Startparameters... 9 6 Program sequence... 9 7 S Client... 0
General description S is a program which launches Microsoft Flight Simulator X, Microsoft Flight Simulator X SteamEdition or PREPARD v.x with pre-defined configuration profiles. Changes, based on those profiles, will be done to fsx.cfg/prepard.cfg or scenery.cfg. FSX and PREPARD can be used in parallel with S. To make it easier to read this document I just wrote fsx.cfg and scenery.cfg instead of prepard.cfg if you choose PREPARD. I wouldn t even run programs on my FSX/PD, whose function I cannot understand ("never touch a running system"). Therefore the exact program flow will be described in Chapter 6. A lot of other helpful tools to maintain your Simulator are implemented too Before you are using S please read the END USER LICENCE Agreement at LIZENZ.txt carefully.. Disclaimer S is free software and distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. You have no right to get support, software patches or updates. S is tested software but could remain software bugs which could cause data losses or other damage to your computer system. Use S to your own risk.. Donation S has been started as a Freeware project. It took a LOT of hours in testing, programming, graphic design e.g. and therefore we would appreciate if you could do a donation for this project (PayPal donations).. Note of thanks I would like to especially thank all Beta testers. Especially to Andrew Thornton (Developer) who made SceneryConfigEditor compatible to use with S. (http://sourceforge.net/projects/fs-sceditor/). You need v.. or higher Especially to Günter Steiner who has been essential for the improvements of version.x. Especially to Laurent Gomez who did the translation to French. Especially to Jürgen Beisler who did a lot of testing. Especially to Rainer (simmershome.de) who shared important information regarding PREPARD Many thanks for the project http://dotnetzip.codeplex.com/ for creating Ionic.Zip.dll Seite von
.4 Requirements Microsoft.NET Framework 4.5 or later.5 Installation.5. Installation by Setup-File Just start Setup_S_v.6.0.exe and follow the installation instructions Please do not install into Program Files (x86) (because of User Rights).5. Installation by ZIP-File Copy the files of the ZIP-File into an empty directory, e.g. D:\FSX\S Just start the program by Click on S.exe.6 Update Prior an update version.5 of S must be installed. For PREPARD Users: Version.5 or.6 of PREPARD must be installed! IF YOU ARE USING PREPARD Version.5 please select the correct version at Program settings > PREPARD > Use PREPARD Version to unsure the correct handling of the new file structure..6. Update from S v.5 by Setup-File Start Setup_S_v.6.0.exe o Install S on top of previous version Start S o Please check every profile for Start Manager settings Done!.6. Update from S v.5 by ZIP-File Open ZIP-File Copy S.exe into S root directory Copy thumbnail.jpg into S root directory Start S o Please check every profile for Start Manager settings Done!.7 Uninstallation Before you uninstall S please double check that you don t need backups stored in.\backup directory any more. If you ve installed S via Setup-Program: - Go to Control Panel > Software > Uninstall programs - Select S and click Uninstall - Switch to S directory and delete files and directories which were left by uninstaller If you ve installed S via ZIP-File: - Just delete S directory Seite von
Program menu Menu item File > Open > fsx.cfg File > Open > scenery.cfg File > Open > Directory of fsx.cfg File > Open > Directory of scenery.cfg File > Open > Directory S Backup File > Open > Directory FSX File > Open > Directory FSX File > Open > Directory Modules File > Quit Tools > Scenery Manager Tools > Start Manager Tools > XML-Manager Tools > Livery Manager Tools > Profile Manager Tools > Diff Manager Tools > TextInfo Manager Tools > Sort and validate file Tools > Clear controls Tools > Clear [Trusted] in fsx.cfg Tools > Export Airports to GoogleEarth Tools > Show saved flights in GoogleEarth Tools > Show Airports in GoogleEarth Settings > Program settings Settings > Manage Shortcuts Settings > GoogleEarth Export settings Settings > >> Reset all S settings << Logbook ShortCuts About Function Open fsx.cfg to a Text Editor Open scenery.cfg to a Text Editor Open directory of fsx.cfg Open directory of scenery.cfg Open directory which contains all backups that have been done by S Open FSX-Main directory Open SimObjects directory which contains all your Aircrafts, Helicopters, e.g. Open Modules Directory of your Simulator End the program Scenery Manager to define ScenerySets Define programs and file operations which should be done when starting a profile Manage DLL.XML and EXE.XML LiveryManager to hide/show or sort Liverys Backup, Recreate Profiles or create Desktop Shortcuts of Profiles Manage Differences which were found by S Define your own TextInfo or SlewTextInfo (STRG+Z Textinfo s) Sort Configurationfiles (including [SECTIONS]) and validate them Clear your joystick settings for an specific controller to make it useable with FSUIPC or other Clear [TRUSTED] Section within your fsx.cfg Create GoogleEarth Export Shows position of all aircrafts in saved flights in GoogleEarth Show your AddOn Airports in GoogleEarth Open program settings at S Open shortcut Manager to create your own Menu Shortcuts Settings for GoogleEarth Export Clears all settings and all profiles to get a clean S installation Opens Logbook of S User defined Shortcuts Shows version and searches for updates Seite 4 von
Program settings 5 4 6 7 8 9 0 ) Select if you use FSX (FSX-SE), PREPARD or both ) Program settings Debug mode: Creates S.log and ONLY for DEBUG purpose (reduces performance of S) Create Backup: Creates a backup of all.cfg Files of your Simulator BEVOR they are changed (recommended checked ) Show logbook dialog: Asks you if you would like to comment your changes to Userlogbook if you ve changed a profile configuration Allow multiple Instances of S: If unchecked only one instance of S can be run in parallel (recommended checked ) Make changes directly after profile configuration all changes will be done before profile has been started (by ending profile configuration) Automatic Updates: Checks at Website of S (http://aviation.pero-online.de) if a newer version of S is available. No data from your computer will be sending, it just reads information from the internet. If you have no internet connection please disable (because of performance)! Check max. backup files: S will create a ZIP-File with all files in.\backup directory. If you don t want to get your backups zipped, please uncheck this option. Hide Diff Manager Dialog: Does not show the Diff Manager dialog if something changes at your fsx. / prepard.cfg Use Splashscreens for button: Your selected Splashscreen will be used for Start-Button background image Start into Jumpstart -Mode: If you open S the Jumpstart will be shown first, for users who use Jumpstart quite often. FTX Central Reminder: If you are using FTX Regions you will get a Pop-Up Window which will allow you to switch the regions. ) Path to external Scenery.cfg Editor. Best use with SceneryConfigEditor v.. or higher 4) Path settings of a Text Editor which will be used to open configuration files 5) Path to SClient Trigger file. Must be set to the file share that is access able from the client PC (see chapter 7) for further information 6) Select how long S should wait to revert the previous SplashScreen 7) Behavior after Profile has been started Normal: Nothing Close Window: Closes S Window after Profilestart Minimize Window: S Window will be minimized after Profilestart Seite 5 von
8) Clear User-Logbook of all changes that have been done within S 9) Choose language (English/German/French) 0) Select how many profiles should be shown at Startscreen ) Exit S without changes ) Save and exit settings ) Switch to Path settings for other simulators 4 ) Select path settings for FSX (the same logic for FSX-SE or PREPARD) ) If you like to use the FTX Central Reminder to remind you switching FTX Regions, you need to set the path to FTXCentral.exe ) If you like to use Active Sky Next profiles and setting with S, you need to set the path to ASNext.exe. Otherwise the profile settings will be disabled. 4) Switch to FSX-SE (only for users of FSX-SE) S is using the same S profile files for FSX and FSX-SE. Therefore you must select either using FSX or FSX-SE. If you check or uncheck this setting all FSX*.* configuration files in.\userprofiles will be backuped and deleted to make it possible that S is importing the right files for the right simulator The use of FSX-SE mode will be indicated be FSX SE Icon on the right side of S (in simulator related dialogs) and on top of every window Seite 6 von
4 Startscreen 4 5 ) Open Jumpstart Dialog to jump into a saved flight directly (see Chapter 5) ) Select the S Mode (FSX or PREPARD) if installed and configured ) Start a profile (change FSX configuration based on that profile) 4) Set up the profile 5) Indicates that profile0 has been started last time. If it shows last active it indicates that this was the last profile of configuration. Seite 7 von
5 JumpStart 5. General JumpStart allows you to jump directly into a saved flight. You can quick select a profile and combine with a saved flight, select date and time and fly These settings are valid if you ve selected other settings at the profile. 5. Functions 4 6 5 7 8 9 4 0 5 6 Seite 8 von
) Select S Profile ) Select a saved flight - If you have a saved flight configured in that profile, S will use the JumpStart selected one ) Hide Simulator Startup / Welcome Screen and jump directly into the flight 4) Needed if you switch your aircraft with a saved flight 5) Set the started profile to paused 6) Select if you would like to use a No changes to scenery.cfg, ScenerySets or External scenery.cfg - No changes to scenery.cfg: S won t touch your Scenery settings - Use S ScenerySet: You can select the build-in SIMstarer functions to handle Scenery settings - Use external scenery.cfg: You can use an external scenery.cfg with S. Just enter the path to the source file - You can only use one option. The other option will be disabled then (see screenshot External scenery.cfg ) 7) Select your ScenerySets 8) Select an external scenery.cfg. The source file must not be named scenery.cfg it will be copied to scenery.cfg if the profile starts - S can handle other scenery.cfg files - Just select a source file by clicking Select file - If you would like to edit this scenery-file just click Open in ext. Editor (you need to select a path to external Scenery Editor in Program settings (Chapter ). External Scenery Manager e.g. SceneryConfigEditor 9) Select Aircraft for this flight 0) Shows Saved Flight Information ) Exports current Aircraft Position to GoogleEarth ) Set time and date for this flight (will be saved in the selected flight) ) Will use system time for this flight 4) You can select a new position for your flight (Gate, Parking or Runway). Click Select to select your starting point. (see picture below) 5) Cancel Dialog and go back to Startscreen 6) Start selected flight Seite 9 von
6 Module FSX/PD Configuration 6. General Important: Only changes which are made here or in FSX.cfg -Tab will take effect in your fsx.cfg/prepard.cfg next time this profile starts. 6. Functions 4 5 ) Switch profiles and change profile name and description ) Defines profile name (will be shown at the start page). Only [0-9] or [a-z] or [A-Z] is allowed ) Defines profile description (will be shown at the start page) 4) Profile configuration Nearly all settings of FSX/PREPARD can be done here An orange colored value indicates, that this value differences from the MasterProfile. A grey colored value indicates that this setting has been done at the MasterProfile. If you click on the value you ll find a context menu to delete or reset this value to FSX- Default. If delete is greyed out that it s a FSX-Standardvariable which cannot be deleted. 5) Close profile settings Seite 0 von
7 Module Startdefinition 7. General Select the RunSet which will run rd party programs or performing file operations like rename, copy, e.g. One RunSet can be assigned to different S profiles. 7. Functions 5 4 6 ) Select a RunSet for the current profile. RunSets are defining which programs will be started when the profile will be executed. ) Open Start Manager do define a RunSet or create new ones ) Select a default flight for your profile. This flight will be loaded whenever the profile is started. 4) If you uncheck Autogen enabled that S will rename.\autogen\default.xml to disable default autogen (only for low performing systems, because it reduces Autogen) 5) ReStart Windows Aero Desktop after Simulator 6) Only needed for users of SClient on a remote computer: If this option is checked S will copy a SClient_Trigger.txt file at every start of a profile to the SClient Trigger directory which must be set in the Program settings Seite von
8 Module FSX/PREPARD.cfg 8. General It shows all configuration parameters of the current profile. This view allows setting up variables which are not available in FSX/PD Configuration ; meaning all settings of FSX/PD.cfg. 8. Functions 4 5 6 7 ) Adds new entry to this profile ) Adds a new variable and value which is not available in drop down list ) Shows current config for this profile. It shows just the differences between MasterProfile and the selected profile if Masterprofile is not selected. 4) Disable current setting by adding // 5) Remove selected variable and value. If last variable will be deleted the section will be deleted too. 6) Import from other profiles (existing settings will be overwritten) from other S profiles from current FSX/PD.cfg. Section [TRUSTED] won t be imported. 7) Read your current fsx.cfg/prepardd.cfg to the profile again (only for Masterprofile) Seite von
9 Module ScenerySet 9. General You can define an individual definition of which Scenerys you would like to use for each profile. This Scenery Configuration is called ScenerySet. That gives you the ability to define for example one profile with Eyecandy for VFR and one reduced profile for IFR. 9. Functions 4 ) Select if you would like to use a No changes to scenery.cfg, ScenerySets or External scenery.cfg No changes to scenery.cfg: S won t touch your Scenery settings Use S ScenerySet: You can select the build-in SIMstarer functions to handle Scenery settings Use external scenery.cfg: You can use an external scenery.cfg with S. Just enter the path to the source file You can only use one option. The other option will be disabled then (see screenshot External scenery.cfg ) ) Select one or more ScenerySet for this profile To assign more than one ScenerySet just tick the required checkbox. You can use it like ScenerySet Groups for complex Scenery.cfgs ) Open SceneryManager to define ScenerySets Seite von
4) Select an external scenery.cfg. The source file must not be named scenery.cfg it will be copied to scenery.cfg if the profile starts S can handle other scenery.cfg files Just select a source file by clicking Select file 5) If you would like to edit this scenery-file just click Open in ext. Editor (you need to select a path to external Scenery Editor in Program settings (Chapter ) Seite 4 von
0 Module XML-Files 0. General This module can assign different DLL.XML / EXE.XML Sets for every S profile. You can disable DLLs which are not needed for your current profile and enable DLLs that are required for this profile. To manage the DLL Sets use XML Manager. 0. Functions ) Select your DLL.XML Set for this profile ) Select your EXE.XML Set for this profile ) Open XML Manager to manage the XML Sets Seite 5 von
Module SplashScreen. General A SplashScreen can be defined for every profile of S. We included Sets for FSX and PREPARD (thanks to Günter Steiner). If you would like to add your own SplashScreen just open the SplashScreen directory by clicking on the BIG SplashScreen Window.. Functions 4 5 ) Don t use SplashScreen for this profile (Uires\dlgsplash.bmp won t be changed) ) Select a SplashScreen for this profile ) Click obens SplashScreen Directory to add your own SplashScreens 4) Reset SplashScreen to last saved version 5) Reload Selection if you ve inserted and SplashScreen into SplashScreen directory Seite 6 von
Module User Logbook. General This logbook documents all changes that the user has been done to a configuration profile. After every change the user will be ask if you would leave a short comment for this change (e.g. Test with higher LOD Settings). That should give you a good overview of all changes to your SIM.. Functions 4 5 ) Add own logbook entries ) Add/Change own logbook entry ) Show current logbook 4) Filters in logbook 5) Jump to time stamp This dialog can be disabled in Program-Settings. See Chapter. Seite 7 von
Tool Start Manager. General The StartManager allow you do define RunSets which define file operations like copy, delete, e.g. and starting rd party programs like weather tools e.g. RunSets must be assigned to a S profile. One RunSet can be used for multiple profiles. If you are changing existing file operations or program settings you need to click Apply ( Add button becomes Apply button). Functions 4 5 6 7 8 9 0 ) Select a RunSet ) Create a new RunSet ) Rename a RunSet 4) Copy a RunSet 5) Delete a RunSet 6) Shows all programs or file operations for that RunSet 7) Sort order of programs and file operations 8) Remove a program or file operation from RunSet 9) Add a program to RunSet. You can define parameters if needed. 0) Select the program priority for TaskManagement ) Select the WindowStyle to open a program minimized, maximized or hidden ) If you check this option this program will be closed after simulator has been closed ) Add the program to RunSet Seite 8 von
4 Tool Scenery Manager 4. General The SceneryManager manages Scenery profiles called ScenerySets. You can assign multiple configuration profiles to one ScenerySet. A ScenerySet describes which Scenery will be used and which should be disabled. Important: The SceneryManager works with Title of the scenerys. If you rename a Scenery title you have to deactivate it again in S because the old title won t be found 4. Functions 7 6 8 4 5 0 9 4) Select current ScenerySet 5) Create a new ScenerySet 6) Rename a ScenerySet 7) Copy a ScenerySet 8) Delete a ScenerySet 9) Sort available Sceneries ascending 0) Hide Basis Scenery of your SIM ) Hide active Scenery ) Activate / selected scenenys in THIS ScenerySet or in ALL ScenerySets ) Delete Scenery from scenery.cfg and all ScenerySets of S 4) Rename Scenery in scenery.cfg and all ScenerySets 5) Add new Scenery to scenery.cfg 6) Show Scenery for this ScenerySet a. A bold entry indicates that this Scenery is ACTIVE b. Scenerys can be disabled by clicking the CheckBoxes Seite 9 von
5 Tool Livery Manager 5. General The Livery Manager allows you to view, enable, disable and move Liverys. So you can move your personal favorite aircraft to the first (00) position so that it is displayed in FSX/PD first. If you have hidden a livery it won t be shown in your simulator. 5. Functions 5.. View mode Thumbnails 4 6 5 7 8 9 0 ) Switches to list-mode for faster sorting of Liverys ) Show All Liveries Disabled only Enabled only ) Jump to selected aircraft 4) A "transparent" title indicates that this Livery enabled in FSX/PD 5) A "grey" title indicates that this Livery disabled in FSX/PD 6) Change the sorting of the liveries 7) Change selected livery as a PREPARD favorite plane 8) Hide or show selected aircraft in FSX/PD 9) Open aircraft directory 0) Quit Livery Manager Seite 0 von
5.. View mode List 4 5 6 8 7 ) Switches to list-mode for faster sorting of Liverys ) Jump to selected aircraft ) [OFF] indicates that this Livery disabled in FSX/PD 4) Moves selected livery one up 5) Moves selected livery one down 6) Hide or show selected aircraft in FSX/PD 7) Open aircraft directory 8) Quit Livery Manager Seite von
6 Tool Manage profiles 6. General Profiles can be sorted into your display order, refresh them, create a Desktop Shortcut, copy them or simply create a backup. 6. Functions 4 5 6 8 7 9 0 4 ) Select profile ) Sort profile one up ) Sort profile one down 4) Refresh selected profile and deletes all settings 5) Creates desktop shortcut of S 6) Creates desktop shortcut to selected profile 7) Creates profile backup into subdirectory \Backup of S 8) Show existing backups 9) Restore an existing backup to its initial profile 0) Delete existing backup ) Copy Profile ) Select Source Profile ) Select Target Profile 4) Close profile settings Seite von
7 Tool Diff Manager 7. General Each time S indicates a configuration parameter inside fsx.cfg / prepard.cfg the Diff Manager will be shown at S startup. Diff Manager indicates these variations. Meaning that there has been done an configuration change to fsx.cfg by an external program or FSX itself which is not configured in S. For example if an external installer adds a SimObjects Path it will detected here and you can decide if you would like to add it to MasterProfile or leave it. 7. Functions 4 5 6 ) Show Variations of fsx.cfg New Variations Indicates differences between fsx.cfg and your S Configuration Archived Variations Indicates variations which have not assigned to Masterprofile until now Ignored Variations Indicates variations which should be ignored If these Items are changing S do not prompt them ) Delete checked item ) Adds checked Items to IgnoreList 4) Refresh selected profile and deletes all settings 5) Creates desktop shortcut of S 6) Creates desktop shortcut to selected profile 4 Seite von
8 Tool TextInfo Manager 8. General You can define your own TextInfo s or SlewTextInfos. A TextInfo will be shown if you press CTRL+Z a SlewTextInfo if you re in Slew-mode. 8. Functions 4 6 5 4 8 7 9 ) Create a new TextInfo ) Create a new SlewTextInfo ) Delete selected TextInfo 4) Reset all TextInfos and SlewTextInfos to default 5) Show values that are assigned to [SlewTextInfo.] 6) Sort values 7) Shows values that are not assigned to [SlewTextInfo.] 8) Add or remove a value 9) Close Dialog Seite 4 von
9 Tool Sort and Validate files 9. General S is able to sort [SECTION] Files like fsx.cfg. Simply select such file and click Sort file. If you wish to validate a file just leave this options checked and S will detect 9. Functions - Double Variables - Variables without values - Sections without [ or ] 4 5 6 7 ) Select predefined files ) Open file dialog to select another file ) Start file-sort 4) Validate file too 5) Show content of current file 6) Open file in Texteditor 7) Close dialog 0 Tool Clear [TRUSTED] 0. General Clears [TRUSTED] section in fsx.cfg. Meaning you have trust all DLL s again next time SIM starts. Tool Show Airport in GoogleEarth. General Opens GoogleEarth and shows all your AddOn Airports. Seite 5 von
Tool Google Earth Export. General Creating a KML-Export of all your Add-on Airports. This function uses an external program (MAKERWYS.EXE) from Pete Dawson to create a file named RUNWAYS.TXT. S is able to create a GoogleEarth Export based on this file. You need MAKERWYS.EXE v4.675 from Pete Dawson which can be downloaded here: http://www.schiratti.com/dowson.html You need GoogleEarth which can be downloaded here: http://www.google.de/intl/de/earth/. Functions If you select No S will activate all Scenery in your scenery.cfg, recreating runways.txt and revert your scenery.cfg to normal (before). If you select Yes he will use the current scenery.cfg. Click Yes will update your existing runways.txt will be done by Pete Dawson s MAKERWYS.EXE. This will take some time Creating GoogleEarth KML-File If you would like to start Google Earth just click Yes Seite 6 von
Settings Manage ShortCuts. General You can define your own ShortCuts Menu and add URLs, Files, or external programs.. Functions Just add a name of your ShortCut MenuItem and define your target. Targets can be - File (PDF, TXT, e.g.) - Executable (EXE, CMD, BAT, e.g.) - URL (http://, https://) Seite 7 von
4 Settings GoogleEarth Export 4. General GoogleEarth Export shows all your installed AddOn Airports in GoogleEarth. Some directory s should not be included in that export to avoid a bunch of Airports which are not typically AddOn s for example MyTraffic. 4. Functions 4 5 6 7 8 9 0 ) Add a new ICAO Code for an Airport that should be hidden at the export ) Show your hidden Airports ) Remove a hidden Airport 4) Add a directory or parts of a directory string that should not be included in export 5) Show excluded path or substrings 6) Remove path from that list 7) If you check this setting GoogleEarth Export won t show the path of the scenery. 8) Update all Settings of GoogleEarth Exporter (recommanded) 9) Path for the.kml Export Seite 8 von
5 Using Startparameters S.exe can be started the parameters. Example to start FSX with profile 0: D:\S\S.exe FSX profil0 Example to start PREPARD with profile 0: D:\S\S.exe PREPARD profil0 6 Program sequence S Start (S) checks if program updates are availible (S) checks if changes can be found in fsx.cfg which are not present in one profile configuration Profile Configuration Changes will be saved in \UserProfiles\ directory NOT in fsx.cfg (if you configure profiles) (User) defines changes to fsx.cfg (User) defines ScenerySet to disable not needed Scenerys (User) defines SplashScreen (User) defines SimObject-Paths for this profile (if needed) Start Profile (S) backups fsx.cfg and scenery.cfg to \Backup\ directory (S) combines Masterprofile with started profile and create new fsx.cfg (S) copy [Trusted] Section from fsx.cfg and paste it into new fsx.cfg (S) copy new fsx.cfg to active fsx.cfg (S) activates all Scenerys in scenery.cfg and deactivate only Scenerys that have been disabled in the related ScenerySet (S) copy selected SplashScreen to UIRES\dlgsplash.bmp and remove it if FSX is started Seite 9 von
7 S Client 7. General S Client is a program which will be used on a second computer to start programs triggered by S. S will copy a file SClient_Trigger.txt to a Trigger directory which will permanently checked by S Client. Once the file is there, S Client will start the defined programs. If you do not use a second computer for your flight simulator, you won t need S Client. 7. Setup 7.. On your primary computer (simulator) ) Both computers need to be in the same network. ) Create a directory and file share where the remote computer will have write access. Example: D:\FSX\SClientTrigger You need to create a network share with write access for everyone. ) Start S > Program settings. Enter the local path to that share (you could use UNC path as well \\MYPC\SClientTrigger 4) Click Profile configuration > Startdefinition > Check Start SClient Trigger after S profile. S will copy a file SClient_Trigger.txt to Seite 0 von
\\MYPC\SClientTrigger everytime the related profile will be started. 7. On a remote computer ) Copy SClient folder to the remote computer. Its located at your S root directory. Seite von
) Start SClient.exe > Settings 4 6 5 7. Select the path to the trigger directory on your remote computer. Shows the programs which will be started if the TriggerFile has been found. Add a program to the execution list 4. Remove a program to the execution list 5. Will start the Search mode automaticly once SClient has been started (no click needed for AutoStart) 6. Will not stop searching for the TriggerFile once the file has been found. 7. Start or Stop the Search mode i. RED BAR << STOPPED>> indicates that SClient will not search for the TriggerFile ii. GREEN BAR << STARTED>> indicated that SClient is ready to wait for the TriggerFile Seite von
) To Start click the RED BAR << STOPPED >> and SClient will move to the logfile. Show the Trigger log. Clear the logfile. Start or Stop the TriggerMode Seite von