Advanced Aesthetic Technology X-Lase
CPL applicator CPL applicator Nd:YAG applicator Nd:YAG procedure technologies for unlimited face and body care Combined Nd:YAG laser and CPL (Calibrated Pulsed Light)
About Biotec Italia Biotec Italia is a diversified Aesthetic and Well-being company, focused on improving people s lives through aesthetic innovations. With his headquartered in Italy, Biotec Italia employs approximately 50 employees and operates in more than 50 countries worldwide. The company has continued to grow each year and is a market leader in clinically-proven aesthetic technology and skin health products. Over the years, the company has developed primarily for the aesthetic, dermatology, plastic surgery and related beauty and health markets. Through combining strong know-how and clinical expertise, Biotec Italia aims to create advanced aesthetic solutions for common and visible skin conditions in adult skin, including premature aging, photodamage, hyperpigmentation (irregular or patchy discoloration of the skin), acne, sun damage, rosacea and soft tissue deficits, such as fine lines and wrinkles. Our broad portfolio of innovative products include a variety of aesthetic solutions: laser and light systems, radiofrequency, low and high frequency ultrasound, skin peeling technology, needle free meso-therapy, bio-stimulating currents, and advanced skin care formulations. Our Values Quality Mission Biotec Italia strives to achieve unsurpassed excellence and reliability in manufacturing and supplying high quality industrial products and services to our customers, clients, and partners. To achieve this goal and to assure "total customer satisfaction", all employees of Biotec Italia will be challenged to achieve the highest quality possible in all aspects of their jobs and for each process of our business. Our company shall never be satisfied with existing quality standards. We shall implement the concepts of continuous improvement, clear accountability, and clear measurability to assure ongoing quality enhancement in a way that is quantifiable to our customers and our employees. In addition, we will require that all of our partners and vendors participate with us fully in supporting this Quality Mission. All aspects of our business, from initial product development through the final delivery of goods and services to our customers, will be examined to assure compliance with our Quality Mission. Being in a competitive marketplace, we understand that it is mandatory to pursue vigorously this Quality Mission and to achieve continuous improvement, in order to deliver unsurpassed value for our customers, profit for our shareholders, and a stable and pleasant work environment for our employees.
Management Fulvio Antonio Ferrari Owner, Director and Research and Development ferrari@biotecitalia.com Francesco Piovan Owner, Director and Sales and Field Marketing commerciale@biotecitalia.com Franco Veneziale Owner, Senior Electronic Engineer progettazione@biotecitalia.com Ermes Stefani Product Development, Electronic Engineer tecnico@biotecitalia.com Loris Cuman Product Development, Mechanic Engineer meccanica@biotecitalia.com Raffaella Borsato Financial Chief Officer borsato@biotecitalia.com Cristina Caregaro Administration Chief Officer amministrazione@biotecitalia.com Alessio Cortesia Global Marketing and Design Development web@biotecitalia.com Francesco Pierantoni Chief International Sales manager.export@biotecitalia.com Silvia Peruzzo Senior International Sales sales.export@biotecitalia.com Marta Bedin UK International Sales export@biotecitalia.com Deborah Subissati Medical Research ricerca@biotecitalia.com Eleana Ferrari Medical Research medical@biotecitalia.com
Xlase system utilizes high-powered xenon lamp that require water cooling for reliable operation. Very importantly, too, the closed-cycle cooling system enables optimal xenon lamp preservation and safe treatment application. Other Intense Pulsed Light systems available on the market utilize forced air to achieve xenon lamp cooling; such system has proven to lead to lamp overheating and poor operational performance. The unique reflective cavity, generates maximum energy density in both Nd:YAG and CPL modules. The selected treatment source is delivered from the handpiece into the skin, where it releases only the wavelengths absorbed by the target. The strength and duration of the pulse is also tightly controlled to ensure the target is selectively heated to, whilst leaving the surrounding tissue unharmed. CPL and Nd:YAG Laser Cavity Sapphire crystal filters Xlase in CPL operation mode provides a range of different available wavelengths. Through selection of sapphire crystal filters is like having a suite of lasers to effectively treat a number a of skins conditions: these special cut-off filters are used to block out wavelengths of light below the filter number selected and allow only those wavelengths of light above the filter number to pass through. This makes the Xlase system very versatile and gentle offering gradual results with minimal risk of side effects and patient downtime. Thermo-electric coupling tip cooler An integral part of the Xlase system is the chill tip. This contact cooling handpiece protects the skin by actively cooling the skin before, during, and after the light is transmitted. It also actively draws off heat from the skin surface. The chill tip also has a slight anesthetic effect which helps to minimize the discomfort during procedure. CPL procedure Closed-cycle water cooling system CPL cut off filters The Xlase Nd:YAG generator allows fast and effective laser hair removal treatments in the darkest skin types. The laser beam ensures light penetration to the deepest follicles while its low absorption guarantees preservation of the surrounding tissues in all skin types. Xlase's zoom handpieces allows accurate selection of the hair reduction treatment area size and instantly switch to more focused laser spots for fine vascular treatments. Nd:YAG handpiece Nd:YAG (infrared 1064 nm) Generator Nd:YAG procedure Superior by design, the new Xlase Calibrated Pulsed Light generator offers several innovative and advanced technology enhancements. Compared to other IPL systems available on the market the Xlase system has proven among the most powerful. The Calibrated Pulsed Light generator is simple and efficient to operate; controls are within easy reach and important user information is clearly displayed on the LCD, including energy delivered and treatment setting with true energy fluence up to 30 J/cm2. Nd:YAG vascular procedure Calibrated Pulsed Light (broad spectrum) Generator CPL handpiece Device Components
The Procedures Ageing Acne Pigmentation Epilation Vascular Procedure mechanics: flashes of light work in a similar way to non - ablative lasers by causing heat damage to dermal tissues without disruption or removal of the outer epidermal layers of the skin. It is thought that the heat in the dermal layers causes collagen to be produced which helps reduce the appearance of lines and wrinkles. Procedure mechanics: Xlase acne treatment uses lights of three colors to treat acne and acne scars. The treatment consists of yellow, green and red intense light that is emitted in a series of short pulses. The yellow light emitted destroys the bacteria that live in the skin and cause acne, while the red light directly targets the overactive sebaceous glands that cause outbreaks of pustules. This heating effect generated deep into the skin helps to prevent over-production of excess sebum. Procedure mechanics: the chromphore is represented by the melanin. For this procedure lower spectrum wavelengths are selected to target the melanin which selectively heats the brown spots resulting in damage to the lesion whilst causing minimal damage to the surrounding skin. Following treatment, the damaged lesions turn darker and may crust. Over the following weeks they will gradually flake away from the skin leaving little trace of the original mark. Procedure mechanics: Xlase is effective for hair removal in any area of the body with unwanted hair, including the back, chest, face, legs and bikini area. For the treatment of unwanted hair, the light targets the pigmented hair within the follicles that are in active growth phase (anagen), raising the temperature and destroying the follicle as well as the stem cells responsible for new hair growth. Several treatments are required for hair removal as only a small percentage of a person`s hair is in active growth phase at any given time. Procedure mechanics: narrow spectrum wavelengths are useful for the treatment of small broken blood vessels on the face secondary to rosacea, those present around the nose, and cherry angiomas. The light targets the hemoglobin in the vessels and coagulates the vessels. Disappearance of the unwanted vessels and lesions is often immediate. Rosacea Technical Specifications Procedure mechanics: Rosacea condition is treated with a double synchronic action; firstly red thread veins absorb the light energy raising the temperature. The produced damage encourages the body to reabsorb them, improving skin appearance. Secondly the light energy warms the collagen fibres in the skin that stimulates new collagen and collagen remodelling; this improves the support of the small blood vessels which helps to delay the development of more thread veins.
Technical specifications NdYAG Laser Module Laser Type Wavelength Energy Density Pulse Duration Repetition Rate Spot Size Laser Emission Control Aiming Beam Nd:YAG 1064 nm 24 J (max) From 5 to 50 ms Single pulse - 2 Hz (max) 2.5-4 -6-7 Footswitch Diode laser CPL Calibrated Pulsed Light Handpiece Source Spectrum of Emission Energy per Pulse Pulse Duration Delay between Pulses Number of Pulses Repetition Rate Treatment Area Fluence Emission Control Xenon Lamp 550-1200 nm; 550-950 nm; 650-950 nm; 420-1200 nm 150 J (max) From 1 to 60 ms From 5 to 50 ms From 1 to 50 0.5-2 s 50 mm x 10 mm (5 cm2) Up to 30 J/cm2 Footswitch and Handpiece General System cooling Skin Cooling Interface Dimensions Water and air Ice Type Integrated Touchscreen LCD display 600mm L x 560mm D x 360mm H
Scientific Publications Photorejuvenation by submillisecond Neodymium- Doped Yttrium Aluminium Garnet (1,064nm) Laser: A 24 week follow up. American Society of Dermatologic Surgery, 36, 355-362. Koh, B.K., Lee, C.K., and Chae, K., (2010) Lasers: a review. Clinics in Dermatology, 26, 590-601. Rinaldi, F., (2008) Lasers and light sources for the removal of unwanted hair. Clinics in Dermatology, 25, 443-453. Gold, M.H. (2007) Masers ro magic bullets: an updated history of lasers in dermatology. Clinics in Dermatology, 25, 434-442. Houk L.D. and Humphreys, T., (2007) Laser treatment of vascular lesions. Clinics in Dermatology, 24, 8-15. Railan, D., Parlette, E.C., Uebelhoer, N.S. and Rohrer, T.E. (2006) Laser-tissue interactions. Clinics in Dermatology, 24, 2-7. Carol, L. and Humphreys, T.R., (2006) Long-Pulse ND:YAG laser for Treatment of leg veins in 40 patients with assessments at 6 and 12 months. Lasers in Surgery and Medicine, 35, 68-74. Trelles, M.A., Allones, I., n-va Zquez, M., Trelles, O., Ve Lez, M. and Mordon, S., (2004) Laser treatment with a 1064-nm laser for lower extremity class I-III veins employing variable spots and pulse width parameters. American Society of Dermatologic Surgery, 29, 916-919. Sadick N.S., (2003)
The next Step... Should you have any questions regarding Biotec Italia quote we would be happy to discuss your requirements further. Making contact: Write: sales.export@biotecitalia.com www.biotecitalia.com Biotec Italia Viale della Repubblica, 20 36031 Dueville, Vicenza, Italy tel +39 (0) 444 591683 fax +39 (0) 444 361032