Data Sheet Touchscreens for Property Developers The Cisco Smart+Connected 7 In-wall Display and Portable Tablet for property developers provide simple and intuitive touchscreen interfaces for residents of Cisco Smart+Connected Communities. These Smart+Connected Touchscreens allow users to control lights, temperature, movies, music, and more inside the home while providing the means of communicating with the larger community. The 7 In-wall Display is a stylish way to offer total control, it is mounted in the wall, where the user needs it most, such as next to the front door. The Portable Tablet delivers always-on, dedicated system control in a sleek tablet form-factor; it works as a portable or a tabletop touchscreen for ultimate control and flexibility. Both touchscreens include a built-in microphone and camera for communicating with the Video Door Station, for video conferencing with other touchscreens or tapping into additional services. The Cisco In-wall Display can be mounted at convenient locations inside the dwelling, such as near the front door, kitchen or living room for easy access. The Cisco Portable Tablet goes anywhere within the home. For example, a Cisco In-wall Display mounted next to the front door provides access to home control and front door monitoring. Similarly, the Cisco Portable Tablet provides the same capabilities while being carried from room to room. The Portable Tablet, which comes with a docking station for charging and easy access, can be placed in a location such as the bedroom. When the resident is ready to go to sleep, a simple touch of a button can turn off the lights, reduce the temperature, and lock the doors. 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 1 of 7
Features and Benefits 7 In-wall Display The In-wall Display supports both Ethernet and Wi-Fi connectivity and can be securely mounted in any area of the dwelling to provide consistent and reliable network access. The Cisco In-wall Display also supports Power over Ethernet (PoE), allowing the device to receive power directly from the Ethernet cable, eliminating the need for a separate power connection. Features include: Sleek look and feel with edge-to-edge capacitive glass and low profile Four customizable buttons that allow one touch to set a scene (for example, a sleep scene that turns off the lights, reduces the temperature, and locks the doors) Flexible power (AC or Power over Ethernet) and network connectivity (Ethernet or Wi-Fi) options Integrated camera with full-motion video for high-quality audio and video communications with the Video Door Station and Portable Tablet (Cisco Video Door Station must be purchased separately) Audio and video intercom functionality that provides communications between touchscreen units G.722 wideband audio intercom featuring beamforming microphones for crystal-clear communications 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 2 of 7
Portable Tablet The Portable Tablet features full-motion video intercom and the fidelity of wideband audio for crystal-clear communications and control throughout the home. The Portable Tablet supports Wi-Fi networking and includes a docking station with built-in Ethernet connection that supports Power over Ethernet (PoE), allowing the device to receive power directly from the Ethernet cable while eliminating the need for a separate power connection. Features include: Easy configuration as a portable or as a tethered tabletop unit for flexible installation Integrated camera with full-motion video for high-quality video communications with the Cisco Smart+Connected Video Door Station and In-wall Display Integrated speakers and dual microphones with beamforming and G.722 wideband audio for uncompromised high-fidelity sound Audio and video intercom integration with other Cisco In-wall Displays and Portable Tablets installed in the dwelling Full-color, capacitive LCD touchscreen control, along with four programmable buttons, for convenient fingertip control Wired and wireless connections through Wireless-N and 10/100 Ethernet (through the docking station) Flexible power options with AC power supply adapter, Power over Ethernet (PoE), or internal battery 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 3 of 7
Supporting Products The Touchscreens are paired with Controller(s) to manage the full suite of Smart+Connected Residential capabilities and services. The Cisco Inwall Display also requires a Back Box for installation. The type of Back Box is dependent on the specific project requirements. Table 1 lists the names and part numbers for these supporting products. Table 1 Residential Products Used with the Cisco In-Wall Display and Cisco Portable Tablet Product Name Controller 250 Controller 800 In-wall Back Box, New Construction (-PLS for Plastic or MET for Metal) In-wall Back Box, Retrofit (-PLS for Plastic or MET for Metal) Part Number SCH-CONTROL-250 SCH-CONTROL-800 SCH-NEWBB-XXX SCH-RTRBB-XXX 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 4 of 7
Product Specifications Table 2 lists product specifications for Touchscreen devices. Table 2 Specifications for Touchscreens Product Display Integrated camera 7 In-wall Display 640 x 480 VGA 30 fps Min. lumination: 5 Lux Viewing angle: 60 degrees Portable Tablet 640 x 480 VGA 30 fps Min. lumination: 5 Lux Viewing angle: 60 degrees Display dimensions 7-inch TFT LCD 7-inch TFT LCD Pixel resolution 800 x 480 800 x 480 Touchscreen Capacitive touch Capacitive touch Programmable buttons 4 4 Intercom Microphone Dual microphones Voice pick up from 10 feet away Beamforming Dual microphones Voice pick up from 10 feet away Beamforming Speaker Internal Internal Video and audio Communications Wi-Fi Full-duplex video (H.264) and audio (G.722) Wireless-N (2.4-GHz 802.11n/g/b) RF frequency: 2.4 GHz Antenna: Internal Encryption: 64/128 Wired Equivalent Privacy (WEP), Temporal Key Integrity Protocol (TKIP)/Advanced Encryption Standard (AES) Authentication: Wi-Fi Protected Setup (WPS), WEP, Wi-Fi Protected Access (WPA), WPA2 Full-duplex video (H.264) and audio (G.722) Wireless-N (2.4-GHz 802.11n/g/b) RF frequency: 2.4 GHz Antenna: Internal Encryption: 64/128 WEP, TKIP/AES Authentication: WPS, WEP, WPA, WPA2 Ethernet 10/100 Base-T Ethernet RJ-45 10/100 Base-T Ethernet RJ-45 Power Power supply Power over Ethernet (PoE) PoE (IEEE 802.3af) AC 100V to 240V, 50 to 60 Hz Yes PoE (IEEE 802.3af) AC 100V to 240V, 50 to 60 Hz Yes 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 5 of 7
Product Battery 7 In-wall Display Portable Tablet Suspend mode N/A 20 hours Typical use N/A 12 hours (default setting) Charge time N/A 6 hours Other Audio G.722 Wideband Audio G.722 Wideband Audio Environmental Operating temperature Storage temperature Buttons and Outputs Reset Dimensions W x H x D 32 F to 104 F (0 C to 40 C) Relative humidity: 95% 4 F to 149 F ( 20 C to 65 C) Reset: Run a magnet from left to right along bottom of panel Restore Factory Defaults: Remove panel from wall, toggle the twoposition switch behind the panel, remount panel on the wall. This will reset the display to default settings and may require the device to be updated in the project. 4 7/8 x 1 1/8 x 7 1/4 (124mm x 29mm x 184mm) 32 F to 104 F (0 C to 40 C) Relative humidity: 95% 4 F to 149 F ( 20 C to 65 C) Recessed Button requires pin or paperclip. Reset: Push once Restore Factory Defaults: Push and hold 5 to 7 seconds. This will reset the tablet to default settings and may require the device to be updated in the project. 7.5" 5" 0.75" (190.5 mm x 127 mm x 19.05 mm) not including charging dock Mounting In-wall Portable or Tabletop System Requirements Cisco touchscreens must be paired with a Controller, as described in Table 3. Table 3 System Requirements Product Name System Requirements 7 In-wall Display Controller 250 or 800 Portable Tablet Controller 250 or 800 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 6 of 7
Availability The Touchscreens are available to select property developers on a limited geographical basis. If you have an opportunity that could benefit from this solution, please contact your Cisco sales representative. Warranty Information Find warranty information on Cisco.com at the Product Warranties page. Ordering Information Residential products are available through your Cisco authorized reseller. Table 4 lists the ordering information. Table 4 Ordering Information for Touchscreen Devices Product Name 7 In-wall Display Portable Tablet Part Number SCH-7IN-TS (-W and B) SCH-TABLET Cisco Support Cisco offers a wide range of support programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. For more information, contact your Cisco sales representative. For More Information For more information about the Residential products please contact your Cisco sales representative or visit: http://www.cisco.com/go/smartconnectedresidential. 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 9/13 Page 7 of 7