CHM 130LL: ph, Buffers, and Indicators



Similar documents
Chem 100 Lab Experiment #9 - ACID/BASE INDICATORS

Properties of Acids and Bases

Experiment 9: Acids and Bases Adapted from: Chemistry, Experimental Foundations, 4th Ed. Laboratory Manual, by Merrill, Parry & Bassow.

Household Acids and Bases

Household Acids and Bases

Q1: What is the ph Scale? Q6: As acids become more acidic, their ph values

Acids and Bases. AND a widemouth container of the following solids:

ACIDS AND BASES SAFETY PRECAUTIONS

Determination of the Amount of Acid Neutralized by an Antacid Tablet Using Back Titration

Return to Lab Menu. Acids and Bases in Your House

ph Measurements of Common Substances

EXPERIMENT 4 Acid Strength

Syllabus OC18 Use litmus or a universal indicator to test a variety of solutions, and classify these as acidic, basic or neutral

The Acid Test Grade Nine

Experiment 7: Titration of an Antacid

Introduction. ph = log [H + ]

EXPERIMENT 20: Determination of ph of Common Substances

EXPERIMENT 10 Chemistry 110. Solutions Part 2 ACIDS, BASES, AND ELECTROLYTES

Ascorbic Acid Titration of Vitamin C Tablets This lab will be completed individually! Make sure you come prepared!

Acid 7 Base. 1. Describe two things hydrochloric acid does in your body system. 2. What does sodium hydrogencarbonate do in your body system?

Experiment 16-Acids, Bases and ph

Chapter 6. Solution, Acids and Bases

Acids & Bases Around the House Use a ph indicator to find acids and bases

Letter to the Student... 5 Test-Taking Checklist... 6 Next Generation Sunshine State Standards Correlation Chart... 7

ph units constitute a scale which allows scientists to determine the acid or base content of a substance or solution. The ph 0

ph: Measurement and Uses

Chemistry 52. Reacts with active metals to produce hydrogen gas. Have a slippery, soapy feeling. React with carbonates to produce CO 2

CHAPTER 16: ACIDS AND BASES

Physical and Chemical Changes

(1) Hydrochloric acid reacts with sodium hypochlorite to form hypochlorous acid: NaOCl(aq) + HCl(aq) HOCl(aq) + NaCl(aq) hypochlorous acid

EXPERIMENT 10: TITRATION AND STANDARDIZATION

Acid Base Titrations

Acids and Bases: Cabbage Juice ph Indicator

Amino Acids, Peptides, and Proteins

Dissolving of sodium hydroxide generates heat. Take care in handling the dilution container.

Determination of calcium by Standardized EDTA Solution

Neutralizing an Acid and a Base

Experiment 18: ph Measurements of Common Substances. Experiment 17: Reactions of Acids with Common Substances

Acids, Bases, and ph

Acids & Bases: Using Purple Cabbage as a ph indicator. Grade 9 Activity Plan

DETERMINATION OF PHOSPHORIC ACID CONTENT IN SOFT DRINKS

Enzyme Pre-Lab. Using the Enzyme worksheet and Enzyme lab handout answer the Pre-Lab questions the pre-lab must be complete before beginning the lab.

Acids, Bases, and Indicators Colorful Chemistry

TOPIC 11: Acids and Bases

Experiment 3: Extraction: Separation of an Acidic, a Basic and a Neutral Substance

Lab #10 How much Acetic Acid (%) is in Vinegar?

STANDARDIZATION OF A SODIUM HYDROXIDE SOLUTION EXPERIMENT 14

Name. Lab 3: ENZYMES. In this lab, you ll investigate some of the properties of enzymes.

Types of Reactions. CHM 130LL: Chemical Reactions. Introduction. General Information

Experiment 17: Potentiometric Titration

TITRATION CURVES, INDICATORS, AND ACID DISSOCIATION CONSTANTS

Experiment 8 - Double Displacement Reactions

Non-polar hydrocarbon chain

Neutralization Reactions. Evaluation copy

Final Assessment: Acids and Bases and the ph scale

Calcium Analysis by EDTA Titration

Lab 25. Acid-Base Titration and Neutralization Reactions: What Is the Concentration of Acetic Acid in Each Sample of Vinegar?

A PRIMER ON ph. A Presentation for ASTA Conference September 30-October 1, 2008

Teacher Demo: Turning Water into Wine into Milk into Beer

PART I: PREPARATION OF SOLUTIONS AND STANDARDIZATION OF A BASE

Physical and Chemical Properties and Changes

15. Acid-Base Titration. Discover the concentration of an unknown acid solution using acid-base titration.

6.8 Measuring the Acidity of Solutions Page 160

1. To perform a potentiometric titration of a sample of Liquid Drano with hydrochloric acid.

Properties of Acids and Bases

Experiment 6 Coffee-cup Calorimetry

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

We use in our daily life a large

The Determination of Acid Content in Vinegar

Acid Dissociation Constants and the Titration of a Weak Acid

10-ml Graduated cylinder 40 ml 3% Hydrogen peroxide solution (found in stores) Straight-edged razor blade Scissors and Forceps (tweezers)

To determine the equivalence points of two titrations from plots of ph versus ml of titrant added.

Chapter 9 Lecture Notes: Acids, Bases and Equilibrium

Titrations. Acid-Base Indicators and Titration Curves. Shapes of Titration Curves. A titration curve is a graphical history of a titration

Volumetric Analysis. Lecture 5 Experiment 9 in Beran page 109 Prelab = Page 115

Acetic Acid Content of Vinegar: An Acid-Base Titration E10-1

Chemistry 101. Chemistry Experiments for the Home Acidity Determination Using Indicators

5 ACIDS, BASES AND SALTS

EXPERIMENT 12 A SOLUBILITY PRODUCT CONSTANT

Mixtures and Pure Substances

UNIT (6) ACIDS AND BASES

1. What do you think is the definition of an acid? Of a base?

Auto-ionization of Water

ACID-BASE TITRATIONS: DETERMINATION OF CARBONATE BY TITRATION WITH HYDROCHLORIC ACID BACKGROUND

Chem101: General Chemistry Lecture 9 Acids and Bases

Laboratory 22: Properties of Alcohols

Nomenclature and Household Items

Target Mole Lab. Mole Relationships and the Balanced Equation. For each student group Hydrochloric acid solution, HCl, 3 M, 30 ml

Experiment 12- Classification of Matter Experiment

Of Cabbages and Kings

Sketch the model representation of the first step in the dissociation of water. H 2. O (l) H + (aq) + OH- (aq) + H 2. OH - (aq) + H 3 O+ (aq)

Polarity and Properties Lab PURPOSE: To investigate polar and non-polar molecules and the affect of polarity on molecular properties.

Recovery of Elemental Copper from Copper (II) Nitrate

Chapter 17. How are acids different from bases? Acid Physical properties. Base. Explaining the difference in properties of acids and bases

Juice Titration. Background. Acid/Base Titration

Acid-Base Titrations. Setup for a Typical Titration. Titration 1

1. Read P , P & P ; P. 375 # 1-11 & P. 389 # 1,7,9,12,15; P. 436 #1, 7, 8, 11

Extraction: Separation of Acidic Substances

ANSWER KEY. Acids, Bases, and Solutions. Chapter Project Worksheet 1 1. Answers will vary. Sample: cherries, blueberries,

Acids and Bases. Chapter 16

Transcription:

CHM 130LL: ph, Buffers, and Indicators Many substances can be classified as acidic or basic. Acidic substances contain hydrogen ions, H +, while basic substances contain hydroxide ions, OH. The relative acidity or basicity of a substance is indicated by its ph. ph is a scale ranging from 0-14 and is defined as -log[h + ] where [H + ] is the molar concentration (or molarity) of the hydrogen ion, H +. The following scale shows the relationship between ph and [H + ]: Note: The lower the ph, the higher the [H + ]. The higher the ph, the lower the [H + ]. Substances with a ph of 7 are neutral; for example, pure water and table salt, NaCl, are neutral. Substances with a ph lower than 7 contain H + ions and are acidic; for example, carbonated soda and lemon juice are both acidic. Substances with a ph greater than 7 contain OH ions and are basic; for example, soap and drain cleaner are both basic. ph values can be approximated using substances called indicators. These substances change color over a narrow range of ph values and can be used to determine the ph of different substances or to monitor acidbase neutralization reactions. Red cabbage contains a pigment that varies in color depending on ph; thus, it is a natural indicator that can be used to determine the ph of various substances Buffer solutions resist changes in ph upon addition of small amounts of acid or base. For example, human blood acts as a buffer to absorb small amounts of acid or base resulting from biochemical reactions while maintaining a ph close to 7.4 because cells can only survive in a narrow ph range around 7.4. A buffer is a mixture of a special acid and base that don t neutralize each other. So when you add an acid to a buffer, the buffer s base neutralizes it keeping the ph about the same. And when you add a base to a buffer, the buffer s acid neutralizes it keeping the ph about the same. Cool huh? In this experiment, you will use the color of the red cabbage indicator to determine the ph of some common household materials, and to classify the substances as acidic, basic, or neutral. You will also use the cabbage indicator to observe and compare changes in ph when small amounts of acid and base are added to a buffer solution and to water. Next, you will determine the ph of various solutions given their hydrogen ion concentration, [H + ]. Finally, you will use ph to classify various substances as strongly acidic (ph<2), weakly acidic (2<pH<7), neutral (ph=7), weakly basic (7<pH<12), or strongly basic (ph>12). Procedure A. Red Cabbage Indicator 1. Cut about 8 g of shreds from a head of red cabbage. Put the pieces in a 250-mL beaker. Add 50 ml of deionized water. Place the beaker on the hotplate, and heat at setting 4-5 to a gentle boil. Watch the solution carefully to make sure it does not all boil away. Stir often, until the liquid is dark purple (~10 minutes). Work on the problems on page 5 while you are waiting for your solution to turn purple. GCC CHM 130LL: ph, Buffers, and Indicators Spring 2012 page 1 of 5

Note: If your solution is blue, you used tap water instead of deionized water. Prepare a new solution using deionized water. 2. Turn off the heat, carefully put the beaker on a paper towel, and allow the mixture to completely cool for 10 minutes. Pour the colored liquid into a 150-mL beaker to use as the indicator. Waste disposal: Dispose of the boiled cabbage in the regular trash. 3. Arrange 7 small test tubes in a test tube rack. Number them consecutively with the following ph values: 2, 4, 6, 7, 8, 10 and 12. 4. Add about 20 drops of each ph solution into the test tube matching its number. 5. Use a disposable pipet to add 5-10 drops of the cabbage indicator (enough to determine a color) to each test tube. Tap the tubes with a finger to mix the contents. Record the colors you observe for each ph value. Save these solutions to complete Part B. B. ph of Household Materials 1. Bring from home at least 3 small colorless samples of liquids (3-4 ml) and/or solids (size of a pea). Check to make sure that the substances will mix with or dissolve (are soluble) in water. Do NOT bring flammables, like perfume, or alcoholic beverages. (Juices, beverages, bottled drinks, vinegar, household cleaners, detergents, aspirin are some possibilities.) 2. If your sample is solid, dissolve it in 3-4 ml of deionized water. If your sample is liquid, it may be used as is. Pour about 1 ml or 15 drops of each substance to be tested into separate labeled small test tubes. 3. Add 5-10 drops of cabbage indicator to each test tube (enough to determine a color). Record the color and the ph for each substance. Classify each substance as acidic (ph<7), basic (ph>7) or neutral (ph=7). C. Buffers 1. Add about 15 drops of the buffer solution into a clean small test tube, then add 5-10 drops of cabbage indicator to the same test tube. Record the color and ph under Buffer for the Original (Before HCl added) row. 2. Next, use the water bottle to add about 1 ml (about 15 drops) of deionized water into another clean small test tube, then add 5-10 drops of cabbage indicator. Record the color and ph under DI Water for the Original (Before HCl added) row. 3. Add 2 drops of 0.10M hydrochloric acid, HCl (aq), to each of the test tubes prepared in steps 1 and 2. Use a glass stirring rod to mix the solutions, and record the color and ph for each solution in the second row. 4. Repeat Step 1, and record the color and ph under Buffer for the Original (Before NaOH added) row. Repeat Step 2, and record the color and ph under DI Water for the Original (Before NaOH added) row. 5. Repeat Step 3 using drops of 0.10M NaOH (aq), a strong base, in place of the hydrochloric acid, HCl (aq), and recording the color and ph for the Buffer and for DI Water in the table for Effects of NaOH(aq). Waste disposal: Dispose of all solutions down the drain with plenty of water, and wash and rinse the test tubes. Wash your hands and your bench. The lab next week, vinegar titration, is very long. You should read it carefully before lab. GCC CHM 130LL: ph, Buffers, and Indicators Spring 2012 page 2 of 5

CHM 130LL: ph, Buffers, and Indicators Name: Partner: Section Number: A. Cabbage Indicator ph Color of Standard Solutions 2 4 6 7 8 10 12 B. Household Materials Substance Color ph Acidic, Basic, or Neutral 1. What ion do acids produce in aqueous solutions? ions 2. What ion do bases produce in aqueous solutions? ions 3. As [H + ] increases, the ph: circle one: increases decreases stays the same 4. How did you determine the ph of the household materials? 5. Do you think the cabbage indicator would help us determine the ph of coca-cola? Explain. GCC CHM 130LL: ph, Buffers, and Indicators Spring 2012 page 3 of 5

C. Buffers A buffer is a mixture of a weak acid and weak base pair that don t neutralize each other. So when you add an acid to a buffer, the buffer s base can neutralize it thus keeping the ph about the same. When you add a base to a buffer, the buffer s acid can neutralize it thus keeping the ph about the same! Effects of HCl(aq): Buffer DI Water Color ph Color ph Original (Before HCl added) with 2 drops of HCl Effects of NaOH(aq): Buffer DI Water Color ph Color ph Original (Before NaOH added) with 2 drops of NaOH Questions: 1. When HCl(aq) was added to the buffer, its ph. (Circle below) 2. When HCl(aq) was added to the water, its ph. (Circle below) 3. When NaOH(aq) was added to the buffer, its ph. (Circle below) 4. When NaOH (aq) was added to the water, its ph. (Circle below) 5. Why did the buffer solution stay about the same in ph when HCl was added? 6. Why did the buffer solution stay about the same in ph when NaOH was added? GCC CHM 130LL: ph, Buffers, and Indicators Spring 2012 page 4 of 5

Follow up Questions: 1. Determine the ph for each of the solutions below, and state whether the solution is acidic, basic, or neutral. (Refer to page 1.) Solution ph Acidic, Basic, or Neutral 1.0 10-3 M HCl 1.0 10-6 M HCl 0.0001 M HCl 0.01 M HCl Pure water 2. Consider the following ph scale below: Categorize each of the following substances as strongly acidic, weakly acidic, neutral, weakly basic, or strongly basic. Substance ph Category carbonated water 3.9 stomach acid 1.3 saline solution 7.0 tears 7.4 saliva 6.8 Codeine 10.3 carrots 5.1 drain cleaner 13 maple syrup 6.0 GCC CHM 130LL: ph, Buffers, and Indicators Spring 2012 page 5 of 5