Joint Research projects Graduate School on Engineering Mechanics

Joint Research projects Graduate School on Engineering Mechanics Swelling Materials (STW, Shell, NWO) 1998; Prof.dr.ir. T. Arts (UM) Prof.dr.ir. F.P.T. Baaijens Prof.dr.ir. R.M.M. Mattheij Prof.dr. M.A. Peletier Dr.ir. J.M. Huyghe Ir. M.M. Molenaar (PhD 2/3) - 1998-2001 Mechanics of porous materials Ir. A.J.H. Frijns (PhD 2) dissertation 2000-12 A Four-Component miture theory applied to Cartilaginous tissues: numerical modeling and eperiments Ir. R.W. Roos (PhD 2) start 2001-07 Eperimental validation of a gel model Dipl.Ing. Y. Schroeder (PhD 3) start 2003-10 Key parameters in the computational study of disc degeneration STW/Shell Drape Simulations 2002; Prof.dr.ir. R. Akkerman Prof.dr.ir. J. Huétink Dr.ir. V.T. Meinders R. ten Thije (PhD 3) Dissertation 2007-09 Drape and material eperiments on non-crimp fabrics Multiscale Methods in Computational Mechanics Twin projects I - IV (project of DFG, NWO and STW)2002; Prof.dr.ir. R. de Borst (T-I en T-II) Prof.dr.ir. A. van Keulen (T-III) Dr.ir. J.M.R.J. Huyghe (T-IV) Dr.ir. A.S.J. Suiker (T-I) () M. Cid Alfaro (PhD 2) - start 2004-10 (T-1) Crack tunneling and delamination in fibermetal laminates C.1 NLR Stork-Fokker Uni Stuttgart TU Munich Sandia Nat. Laboratories

E. Munts (PhD 2) - dissertation 2006-05 (T-II) Space-time multiscale methods for large Eddy simulation I. Akkerman (PhD 2) - start 2004-10 (T-II) Overlap coupling for hybrid LES/RANS K.G. van der Zee (PhD 2) - start 2004-11 (T-II) hp-adaptive discretization of fluid-structure interaction A.J. de Wit (PhD 2) - start 2004-10 (T-III) Multilevel optimization of composite structures F. Kraaijeveld (PhD 2) - start 2004-10 (T-IV) Cracking intervertebral disc herniation STW-DCB.6368: Objective determination of failure mechanisms in geomechanics 2004; Prof. L.J. Sluys () Dr. R.B.J. Brinkgreve Dr. E.G. Septanika (Pdoc) start 2004-09 Objective determination of failure mechanisms in geomechanics STW project TW 6618: Inverse Acoustics 2005; Prof.dr.ir. A. de Boer Prof.dr.ir. N.B. Roozen Dr. I. Lopez Dr.ir. Y.H. Wynant Ing. A. Winkel Ir. R. Scholte Ir. J.W. Wind uni 4 companies Nine companies (Philips ) 2 other unis Rotor Dynamics (STW project) 2005; Prof.dr.ir. A. de Boer Prof.dr.ir. J.B. Jonker Dr.ir. P.J.M. van der Hoogt Dr.ir. R.G.K.M. Aarts Dr. V. Arora C.2

Rotor Dynamics for micro systems 2007; Prof.dr.ir. A. de Boer Prof.dr.ir. J.B. Jonker Prof.dr.ir. J.E. Rooda Prof.dr.ir. F. van Keulen Prof.dr.ir. J.D. Rien Dr.ir. P.J.M. van der Hoogt Dr.ir. R.G.K.M. Aarts Dr. P. Etman E. Dikmen Nonlinear soil vibrations induced by highspeed trains 2006; Prof. F. Molenkamp Dr. A.V. Metrikine J.S. Hoving (PhD 1) - start 2004-03 Nonlinear soil vibrations induced by highspeed trains Friction stir processing 2008; Prof.dr.ir. R. Akkerman Prof.dr.ir. J. Huétink Dr.ir. T.C. Bor Dr.ir. H.J.M. Geijselaars Dr.ir. D. Christoulis Ir. A.A. van de Stelt Self healing materials 2008; Prof.dr.ir. R. Akkerman Prof.dr.ir. A. de Boer Prof.dr.rer.nat. S. Luding Dr.ir. T.C. Bor Dr.ir. L. Warnet Dr. M. Parapalli Dr. S. Perdahcioglu C.3

Model reduction of comple high-tech systems (stw) 2008-2012 Prof.dr.ir. D.J. Rien Prof.dr.ir. H. Nijmeijer Prof. W. Schilders Dr. N. van de Wouw Dr. M.E. Horstenbach Ir. B. Besselink Ir. A. Lutwoska Ir. U. Tabak Friction modelling in sheet metal forming on multiple scales 2009; Prof.dr.ir. J. Huétink Prof.dr.ir. D. Schipper Dr.ir. T. Meinders Dr.ir. M. de Rooij Ir. J. Hol Corus Motion in Vacuum by Elastic mechanisms and ology (Mov-ET) 2009; Dr.ir. R.G.K.M. Aarts Prof.dr.ir. J.B. Jonker Prof.dr.ir. D.J. Schipper Dr.ir. M.B. de Rooij Ir. S.E. Boer (PhD3) Motion in Vacuum by Elastic mechanisms and ology Structural health monitoring 2009; Prof.dr. A. de Boer Dr. Ir. R. Loendersloot Prof.dr.ir. R. Akkerman Dr. Ir. L. Warnet Ir. T. Ooijevaar M. Ravanan MSc C.4

Local Alloying and Cladding of Advanced Al- Alloys Employing Friction Stir Welding 2009; Prof.dr.ir. J. Huétink Prof.dr.ir. R. Akkerman Dr.ir. H.L.M. Geijselaers Dr. T. Bor Dr. D. Christoulis Ir. A. van der Stelt Intelligent Rotor Blades 2009; Prof.dr.ir. A. de Boer Prof.dr.ir R. Akkerman Dr. R. Loendersloot A.R.A Paternoster MSc Ultrasonic Inspection of Thermoplastics 2009; Prof.dr.ir. R. Akkerman Prof.dr.ir. A. de Boer Dr.ir. R. Loendersloot Dr. A. Demcenko M. Ravanan MSc C.5

M2i Materials Innovation Institute (former NIMR) Cluster 1 Virtual shaping and structural performance (Huétink) and Cluster 2 Multi-scale fundamentals of materials (Geers) Friction and Roughness Transfer in Rolling and Metal Forming Processes 2002; Prof.dr.ir. J. Huétink Prof.dr.ir. D.J. Schipper E.C. Dillingh (PhD 3) - Dissertation 2007-12 Friction and roughness transfer INPRO TNO 1 ) MC1/2.03158: Strain path dependent models for forming and crash 2002; Prof.dr.ir. J. Huétink Prof.dr.ir. M.G.D. Geers Dr.ir. A.H. van den Boogaard Dr.ir. V.G. Kouznetsova M. van Riel T. Yalcinkaya Corus Philips Boal Alum. RWTH Aachen MC1/2.05205: Forming the limits of damage predictions From fundamentals to application 2005; Prof.dr.ir. M.G.D. Geers Prof.dr.ir. J. Huétink Dr.ir. J.P.M. Hoefnagels Dr.ir. V.G. Kouznetsova Dr.ir. R. Peerlings Ir. C. Tasan Dr.ir. H.H. Wisselink Ir. H. Javani Joni Ir. E.W.C. Coenen Corus DAF De Schelde Philips DAP 1 ) A collaboration was set-up with the PhD project of S. Boers (-) and Uni of Dortmund C.6

MC2.03177 / MC2.02113 / 02EMM30-1/2: Tailoring of processable Metastable steels (FOM-M2i project) 2005; Prof.dr.ir. J. Huétink Prof.dr.ir. M.G.D. Geers Prof.dr.ir. R. de Borst Dr.ir. H. Geijselaers Dr. V. Kouznetsova (M2i-fellow) S. Perdahcioglu (PhD 2) - start 2004-11 Mechanical tests and constitutive modeling of metastable austenitic stainless steels A. Balmachnov (PhD 2) - start 2005-01 Computational characterization and tailoring of metastable steels -LR (V.d. Zwaag, San Martin) Corus Philips DAP MC1.03160: Galling performance indicator 2005; Prof.dr.ir. J. Huétink Prof.dr.ir. D.J. Schipper Dr.ir. M.B. de Rooij G. van der Linde (PhD 3) - start 2004-09 Galling in a single asperity contact 2 ) MC2.02114 / MC2.05235: Fundamentals of Miniaturization and Microsystems 2005; Prof.dr.ir. M.G.D. Geers P.J.M. Janssen (PhD 3) dissertation 2007-12 Miniaturization and forming of micro-parts M. Kolluri (PhD 3) - start 2006-12 Characterisation and prediction of interface delamination in integrated microsystems TNO Philips 2 ) Close interaction with MicroNed (IV-C-3), where a related project is carried out (collaboration / and /) C.7

MICRONED: FUNDAMENTALS, MODELLING AND DESIGN OF MICROSYSTEMS (FUNMOD) Workpackage IV-A/B Transport phenomena and multiphysics (TRANSMU) 2006; Prof.dr.ir. D.J. Rien Prof.dr.ir. R. de Borst Dr.ir. E.H. van Brummelen Prof.dr.ir. M. Gutièrrez Dr.ir. P.Th.L.M. van Woerkom Prof.dr.rer.nat. S. Luding W. Hoitinga (PhD 3) - start 2006-06 (IV-A-1) Adaptive Methods for discrete-continuum methods S. Hannot (PhD 2) - start 2006-10 (IV-A-4) Multiphysical modeling of microsystems V. Rochus (Pdoc) start 2006-? (IV-A-4) Modeling of electrostatic forces in Microsystem simulations C.V. Verhoosel (PhD 3) start 2005-09 (IV-A-5) Stochastic analysis for fracture of piezoelectric components R. Hartkamp start 2009-4 (IV-A-2) MD simulation of LJ Fluids in Nano-/Micro-channels Vacancy (PhD 3) (IV-A-8) Model validation and eperimental testing of multi- physical interaction in MEMS & groups Philips 3 ) Workpackage IV-C Micromechanics 2006; Prof.dr.ir. M.G.D. Geers Prof.dr.ir. A. van Keulen I. Ertürk (PhD 3 - M2i) - start 2007-09 (IV-C-1) Mechanics of dynamically loaded free-standing thin films H. Sadeghian (PhD 3) start 2007-02 (IV-C-2) Surface and interface effects M. Samimi (PhD2) start 2006-02 (IV-C-3) Numerical characterization of delamination in integrated Microsystems RUG (Onck, Annabattula) Philips (Research, App.Tech. and NXP) M2i, DPI 3 ) Close interaction with M2i, where a related project is carried out (MC2.05235) C.8

MICRONED: FUNDAMENTALS, MODELLING AND DESIGN OF MICROSYSTEMS (FUNMOD) cont d Workpackage IV-D Design and Optimization 2006; Prof.dr.ir. F. van Keulen Prof.dr.ir. A. de Boer Prof.dr.ir. J.B. Jonker Prof.dr.ir. J.E. Rooda Prof.dr.ir. D. Rien Prof.dr.ir. A. van Keulen Dr.ir. P.J.M. van der Hoogt Dr.ir. R.G.K.M. Aarts Dr.ir. P. Etman E. Dikmen (PhD 3) - start 2006-12 (IV-D-1) Advanced modeling of dynamic Microsystems Vacancy (PhD 3) (IV-D-2) Reduced multi-field models for fast re-analysis of microsystems Vacancy (PhD 3) (IV-D-3) Shape and topology optimization of MST devices M. Langelaar (Pdoc) start 2006 (IV-D-3) Design optimization of reliable microsystem components Vacancy (PhD 3) (IV-D-4) Multi-field optimization of MST devices S. Tosserams (PhD 3) - start 2004-09 (IV-D-5) Multi-level optimization for microsystem design C.9

MuST (MULTISCALE SIMULATION TECHNIQUES) Multiscale Simulation Techniques (STW) End of 2007; Prof.dr.ir. R. de Borst (10112) Prof.dr.ir.G.D. Geers (10108/9) Prof.dr.ir. F. van Keulen (10121) Prof.dr.ir. J.D. Rien (10120) Prof.dr.ir. G.Q. Zhang (10121) Prof.dr.rer.nat. S. Luding (10120) Dr.ir. R.H.J. Peerlings(10104) Dr.ir. J.M.R.J. Huyghe (10112) Dr.ir. V. Kouznetsova (10109) Dr. S. Turteltaub (10117) Dr.ir. A.S.J.Suiker (10117) Dr.ir. J.J.C. Remmers (10112) Multiscale computational poromechanics (PROMULT) 2008; Prof.dr.ir. R. de Borst Prof.dr.ir. M.G.D. Geers Dr.ir. J.M.J.R. Huyghe Dr.ir. J.J.C. Remmers Ir. F. Pizzocolo 25 companies among which: TNO-Industrie en Techniek Corus Shell SIEP Océ Techn. Van der Giessen (RuG- 10108/9) Vacancy C.10 Nr. 10104 - Multiscale Mechanics of Fibrous Networks From Fibre to Tissue Nr. 10108 - A multiscale approach toward integrated cohesive interface elements; Multiscale integrated interface Modelling (Mi2M) Nr. 10109 - A multi-scale methodology for the analysis of metallic interfaces; Metallic Interface Modelling (MuMiM) Nr. 10117 - Multiscale model adaption for dynamic performance of multiphase materials Nr. 10120 - Hierachical multi-scale modeling (H- ); A single data structure for micro-macro and Multi-phase /-field models Nr. 10121 - Multiscale simulation of multi-material adherence Prof.dr. G. de With, (- 10121)

C.11