CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN 13501-1:007 Sponsor Prepared by Qualyline Srl Gewerbezone Reifenstein 18 - Sadrobre I-39040- Freienfeld(BZ), Italy and Stefano Mardegan Via Arona 6 I - 0149 Milano, Italy Efectis Nederland BV Lange Kleiweg 5 P.O. Box 1090 NL-80 CB RIJSWIJK The Netherlands Notified Body no. 134 Product name Pol Qualytent Classification report no 009-Efectis-R1063 Issue number 1 Date of issue December 009 Project number 009344 This classification report consists of six pages and may only be used in its entirety. This report is issued by Efectis Nederland BV (previously TNO Centre for Fire Research). Efectis Nederland BV and her sister company Efectis France are full subsidiaries of Efectis Holding SAS since 1 st January 008, in which the Dutch TNO and the French CTICM participate. The activities of the TNO Centre for Fire Research were privatised in Efectis Nederland BV since 1 st July 006. This is in response to international developments and requests by customers. In order to be able to give a better answer to the customer s request and offer a more comprehensive service of high quality and a wider range of facilities, the international collaboration has been further expanded. This is done with highly experienced partners in fire safety in Norway (Sintef-NBL), Spain (Afiti-Licof), Germany (IFT), USA (South West Research Institute) and China (TFRI). Further information can be found at our website.
Efectis Nederland Report 009-Efectis-R1063 December 009 / 6 1. Introduction This classification report defines the classification assigned to Pol Qualytent in accordance with the procedures given in EN 13501-1: 007.. Details of classified product.1 General The product, Pol Qualytent, is defined as roofs and side walls for folding tent systems.. Product description According to the sponsor the product is composed of: - FR Polyester 500x500D, white (Approx.19 gr/m ) - PU coating on one side, yellow/white (Approx. 48 gr/m ) The product has a total thickness of 0.30-0.35 mm and a mass per unit area of approx.40 kg/m..3 Manufacturer/Importer Qualyline Srl Gewerbezone Reifenstein 18 - Sadrobre I-39040- Freienfeld(BZ), Italy and Stefano Mardegan Via Arona 6 I - 0149 Milano, Italy
Efectis Nederland Report 009-Efectis-R1063 December 009 3 / 6 3. Test reports & test results in support of classification 3.1 Test reports Name of Laboratories Name of sponsor Test reports Test method Efectis Nederland BV The Netherlands Qualyline Srl and Stefano Mardegan Italy 009-Efectis-R1064 009-Efectis-R1065 EN ISO 1195 -:00 EN 1383:00 3. Test results Side 1 White polyester surface Test method & test number EN 1383 Length direction: Cross direction: Parameter No. tests Continuous parameter - mean (mm) Results Compliance parameters FIGRA 0.MJ [W/s] 0 - FIGRA 0.4MJ [W/s] 0 - THR 600s [MJ] 0.6 - LFS < edge SMOGRA [m /s ] 3 4.1 - TSP 600s [m ] 54 - Flaming debris - flaming 10 s - flaming > 10 s Compliant Fs 150 mm 54-6 Fs 150 mm 55-6 Fs 150 mm 63-3 Fs 150 mm 57-3
Efectis Nederland Report 009-Efectis-R1063 December 009 4 / 6 Side Polyurethane treated surface Test method & test number EN 1383 Length direction: Cross direction: Parameter No. tests Continuous parameter - mean (mm) Results Compliance parameters FIGRA 0.MJ [W/s] 7.6 - FIGRA 0.4MJ [W/s] 7.6 - THR 600s [MJ] 1. - LFS < edge SMOGRA [m /s ] 1 4.1 - TSP 600s [m ] 54 - Flaming debris - flaming 10 s - flaming > 10 s Compliant Fs 150 mm 68 - Fs 150 mm 70 - Fs 150 mm 70 - Fs 150 mm 73-4. Classification and field of application 4.1 Reference of classification This classification has been carried out in accordance with clause 11 of EN 13501-1:007
Efectis Nederland Report 009-Efectis-R1063 December 009 5 / 6 4. Classification The product, Pol Qualyline, in relation to its reaction to fire behaviour is classified: B The additional classification in relation to smoke production is: s The additional classification in relation to flaming droplets / particles is: d0 Reaction to fire classification: B-s,d0 4.3 Field of application This classification is valid for the following product parameters: - Thickness Approx. 0.30-0.35 mm - Surface density Approx. 40 gr/m This classification is valid for the following end use applications: - Substrate None - Air gap Minimum 80 mm - Methods and means of fixing To be used free-standing - Joints Continious surface, sewed joints 4.4 Duration of the validity of this classification report There are no limitations in time on the validity of this report.
Efectis Nederland Report 009-Efectis-R1063 December 009 6 / 6 5. Limitations This classification document does not represent type approval or certification of the product. MSc. J.F. Ostenfeldt Ing. C.C.M. Steinhage This report is issued by Efectis Nederland BV (previously TNO Centre for Fire Research). Efectis Nederland BV and her sister company Efectis France are full subsidiaries of Efectis Holding SAS since 1 st January 008, in which the Dutch TNO and the French CTICM participate. The activities of the TNO Centre for Fire Research were privatised in Efectis Nederland BV since 1 st July 006. This is in response to international developments and requests by customers. In order to be able to give a better answer to the customer s request and offer a more comprehensive service of high quality and a wider range of facilities, the international collaboration has been further expanded. This is done with highly experienced partners in fire safety in Norway (Sintef-NBL), Spain (Afiti-Licof), Germany (IFT), USA (South West Research Institute) and China (TFRI). Further information can be found at our website.