WOOD Paints. Unleash your Imagination

دهانات األخشاب WOOD PAINTS WOOD Paints Unleash your Imagination

MIDO HEADQUARTERS : New Borg El-Arab city, 2nd Industrial Zone Alexandria, Egypt. Tel.: +203 4593 555 Fax: +203 4592 655 contact@midoco.com export@midoco.com PHAROS FACTORY : New Borg El-Arab city, 2nd Industrial Zone Alexandria, Egypt. Tel.: +203 4593 555 Fax: +203 4592 655 EURO FACTORY : New Borg El-Arab city, 4th Industrial Zone Alexandria, Egypt. Tel.: +203 459 5981 Fax: +203 459 5980 ENDMOUN FACTORY : New Borg El-Arab city, 4th Industrial Zone Alexandria, Egypt. Tel.: +203 459 5981 Fax: +203 459 5980 NEW PLAST FACTORY : New Borg El-Arab city, 4th Industrial Zone Alexandria, Egypt. Tel.: +203 459 5981 Fax: +203 459 5980 ALEXANDRIA BRANCH: 314 El-Kodaa Buildings, Smouha, Alex, Egypt. Tel.: +203 421 0316 / 7 Fax: +203 421 0315 www.midoco.com

Contents 1 Mido Wood Paints International Group of Modern Coatings (MIDO)

Wood Stains 03 Wood Insulators 07 Wood Sealers 11 Wood Varnishes 19 Wood Fillers and Surfacers 33 Wood Decorative Paints 39 Wood Glue 43 www.midoco.com Mido Wood Paints 2

WOOD STAINS Sofa Stain 5

SOFA STAIN Sofa stain is a high quality stain, formulated from high-quality dyes which can be diluted with water and thinner. It is very effective in coloring furniture and wood works as it emphasizes the natural beauty of wood. Color Raw Materials Mixing Ratio 20 colors organic dyes special resins solvents additives. Air temperature ( 20º C). Surface Drying: 2 3 minutes. Complete Drying: 5 minutes. 5 10 ml Stain : 100 ml ( Thinner, Alcohol or water ) Dilute the stain with thinner, alcohol or water as following: 5 10 ml stain : 100 ml (Thinner, Alcohol or water). Spray Viscosity: 10 12 seconds using Ford Cup No. 4 at 25º C. Spray using Spray gun: Nozzle diameter (1.2 1.4 mm); air pressure (3 4 bar) or using a piece of cotton. Number of Coats: 2 coats or depending on the desired color. Surface Preparation: Ensure that the surface to be painted is free from dust, grease and other contaminations. For previously painted surfaces, all loose paints must be thoroughly removed to ensure the paint adhesion. Recommended Uses: Specially formulated to color wood surfaces and furniture. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 250 ml 1Liter 5 Mido Wood Paints International Group of Modern Coatings (MIDO)

WOOD INSULATORS Sofa Insulator (Polyurethane) 9

SOFA Insulator (Polyurethane) Sofa Polyurethane insulator (clear) is used to prepare wood surfaces before spraying polyester paints. It is especially designed to insulate oils excreted by the wood pores. Viscosity Color Mixing Ratio by Volume Clotting Time Coverage Rate 12 seconds at 25º C by Ford Cup No. 4. Clear 1 insulator : 1 Hardener. 4 5 hours at 25º C. Air temperature (25º C). Surface Drying: 20 30 minutes. Complete Drying: 2 hours. 9 12 m 2 / kg depending on the surface and film thickness. Spray using Spray gun: Nozzle diameter (1.5 1.8 mm); air pressure (3 4 bar) or using a piece of cotton. Surface can be painted with polyester paint after 2 3 hours of painting the insulator, and the insulator can be sanded before repainting polyester paint. Insulator must be sanded in case of drying more than 16 hours. Recommended Uses: Specially formulated to paint wood which is known to excrete different types of oils. 2 years for the insulator and one year for the hardener from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1 liter of Insulator 1 liter of Hardener. 9 Mido Wood Paints International Group of Modern Coatings (MIDO)

WOOD SEALERS Nitrocellulose Sealer Vniwood Sealer 13 Modern Touch Sealer 14 Nova Sealer 15 Polyester Sealer Jet Sealer 17 Polyurethane Sealer 2K Polyurethane Sealer 18

Vniwood Sealer Vniwood Sealer is a high-build material to fill pores in wood surfaces. This product is especially designed to prepare wood surfaces before using varnish and to produce a smooth, hard, seal coat without any influence on natural wood grain. It boasts easy sanding and superior adhesion without any effect on the wood color. Color Specific Gravity Viscosity Coverage Rate Film Thickness Dilution Clear dark. 1 ± 0.05 gm. /cm 3. 32000-82000 centipoise / 25º C. Surface Dry: 8 minutes. Complete Dry: 1.5 hour. 6 8 m 2. 120 200 micron. ordinary Duco thinner Sand the surface well. Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity. Apply using spray gun or a piece of cotton. Spray the first coat, and allow it to dry for about 5 minutes. Spray the second coat and allow it to dry well (35 45 minutes). Then, sand it with sandpaper No. 320, to get a smooth coat ready for varnish application. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1 kg 4 kg 10 kg 15 kg. 13 Mido Wood Paints International Group of Modern Coatings (MIDO)

Modern Touch Sealer Modern Touch Sealer is a high-build material formulated from nitrocellulose to fill pores in wood surfaces. This product is especially designed to produces a smooth, hard, seal coat as a foundation before using Duco varnish without any influence on natural wood grain. It is characterized by high filling, easy sanding, and superior adhesion without any effect on the wood color. Color Specific Gravity Viscosity Film Thickness Coverage Rate Dilution Clear dark 1 ± 0.05 gm./cm 3. 80000 : 120000 centipoise / 25º C. Surface Dry: 8 minutes. Complete Dry: 1.5 hour. 120 200 micron. 8 10 m 2. Ordinary Duco thinner. Sand the surface well. Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity. Apply using spray gun or a tpiece of cotton. Spray the first coat, and allow it to dry for about 5 minutes. Spray the second coat and allow it to dry well (35 45 minutes). Then, sand it with sandpaper No. 320, to get a smooth coat ready for varnish application. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 4.25 kg 10 kg 15 kg. www.midoco.com Mido Wood Paints 14

Nova Sealer Nova Sealer is a high-build material formulated from nitrocellulose to fill pores in wood surfaces. This product is especially designed to prepare the wood surfaces before using Duco varnish, producing a smooth, hard, seal coat without any influence on natural wood grain. It is characterized by easy sanding and superior adhesion without any effect on the wood color. Color Specific Gravity Viscosity Solid Content Film Thickness Coverage Rate Dilution Clear dark 1 ± 0.05 gm./cm 3. 140000-180000 centipoise / 25º C. 58 ± 2 % 120 200 micron. 5 6 m 2. ordinary Duco thinner. Surface Dry: 8 minutes. Complete Dry: 1.5 hour. Specially formulated to be used on all types of furniture to be sprayed with Duco varnish, and can be used on all types of veneer as a surfacer to seal pores. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 4.25 kg 10 kg 15 kg. Sand the surface well. Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity. Spray the first coat, and allow it to dry for about 10 minutes. Spray the second coat and allow it to dry well. Then, sand it with sandpaper No. 320. Spray the last coat, so the wood work becomes ready for varnish application. 15 Mido Wood Paints International Group of Modern Coatings (MIDO)

Jet Sealer Jet Sealer is a high-build clear material formulated from polyester to fill pores in wood surfaces. This product produces a smooth, hard, seal coat as a foundation before using Duco varnish without any influence on natural wood grain. It boasts maximum filling, easy sanding and superior adhesion. Color Specific Gravity Viscosity Film Thickness Dilution Clear 1 ± 0.05 gm./cm 3. 80000-120000 centipoise / 25º C. 120 200 micron. Polyester thinner (25 30 %). Surface Dry: 2 hours. Complete Dry: 9 hours. Specially formulated to be used on all types of furniture to be sprayed with Duco varnish, and can be used on all types of veneer as a surfacer to seal pores. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1 kg Sealer 18 gm. auxiliary 18 gm. Hardener. 2 kg Sealer 52 gm. auxiliary 52 gm. Hardener. 10 kg Sealer 180 gm. auxiliary 180 gm. Hardener. Add 2 3 % auxiliary agent to the sealer, and then stir well. Add Hardener at 2 3 % and then stir well again. Dilute polyester sealer with special thinner (25 30 %), taking into account that run time is 20 30 minutes from the beginning of adding the hardener. Spray the first coat, allow it to dry, and sand it. Spray the second coat if necessary. 17 Mido Wood Paints International Group of Modern Coatings (MIDO)

Polyurethane Sealer 2K Polyurethane Sealer 2K is a high-build clear material formulated from polyurethane two components to fill pores in wood surfaces. This product produces a smooth, hard, seal coat as a foundation before using Duco varnish without any influence on natural wood grain. It boasts water, scrubbing and marine condition resistance, easy sanding, and superior adhesion without any effect on the wood color. Color Finish Solid Content by Volume Specific Viscosity Viscosity Coverage Rate Film Thickness Respraying Time Dilution Mixing Ratio 18 months from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 5 kg 20 kg clear smooth and soft 40 ± 2 %. 0.99 kg/liter (mixed) ± 0.5 kg/liter 120 seconds / Ford Cup # 4 / 25º C. 10 m 2 /liter. 40 micron 5 minutes. polyurethane thinner 20 25 % (depending on the application method). 2 polyurethane sealer : 1 Hardener : 20 25 % Thinner. Surface Dry: 2 3 hours. Complete Dry to sanding: 5-6 hours. Specially formulated to be used on wood surfaces for all purposes, as it boasts high filling and easy sanding. First, sand the surface well. Mix the sealer with hardener at a rate of 2 for sealer : 1 for hardener Dilute it with Duco thinner at a rate of 20 25 % Spray 2 coats. Sand the surface with sandpaper No. 320. www.midoco.com Mido Wood Paints 18

WOOD VARNISHES Alkyd Varnish Clear Coat Varnish 21 Clear Coat Varnish (El Shagara) 22 Lux Varnish 23 Mido Star Lux Varnish 24 Nitrocellulose Varnish (Duco) Vniwood Varnish 25 Jet Varnish 26 Soft Matt Varnish 27 Soft Touch Varnish 28 Mido DucoVarnish 29 Polyurethane Varnish Polyurethane Varnish 1:1 31 Polyurethane Varnish 2:1 32

Clear Coat Varnish It is a modified, clear alkyd varnish. It boasts superior gloss, high hardness, adhesion, and supreme resistance to weather conditionsand home chemicals (alcohol, grease, and oils.etc). It is used to paint wood works, including kitchens, furniture and boats. Finish Viscosity Density Gloss Repainting Time Dilution high gloss 5 5.5 minutes / Ford Cup # 4 / 25º C. 0.91 ± 0.02 %. 90 degree. 50 60 minutes at 25º C. after 16 18 hours of painting the first coat. mineral or vegetarian oil benzene. Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P 320. Repaint Vniwood Sealer multiple times to get a polished surface. Dilute the varnish with mineral or vegetarian oil by 5 10 % in case of using the brush or benzene in case of spraying with the gun. It can be repainted after 16 18 hours of painting the first coat. Specially formulated to be used in painting wood works, including kitchens, furniture and boats. 2 years from the date of production, provided storing in proper conditions at 25ºC and 65% of relative humidity. Packaging: 1 liter. 21 Mido Wood Paints International Group of Modern Coatings (MIDO)

Clear Coat Varnish (El Shagara) It is a polyurethane varnish, used to paint wood works, including kitchens, furniture and boats. It boasts superior gloss, high hardness, adhesion, and supreme resistance to home chemicals (alcohol, grease, and oils.etc). Finish Viscosity Density Gloss Repainting Time Dilution clear coat - high gloss 5 5.5 minutes / Ford Cup #4 / 25º C 0.91 ± 0.02 %. 90 degree. 50 60 minutes at 25º C. after 16 18 hours of painting the first coat. mineral or vegetarian oil benzene Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P320. Repaint Vniwood Sealer multiple times to get a polished surface. Dilute the varnish with mineral or vegetarian oil by 5 10 % in case of using the brush or benzene in case of spraying with the gun. Clear Coat varnish (El Shagara) can be repainted after 16 18 hours of painting the first coat. Specially formulated to be used in painting wood works, including kitchens, furniture and boats. 2 years from the date of production, provided storing in proper conditions at 25ºC and 65% of relative humidity. Packaging: 925 gm. 3 kg. www.midoco.com Mido Wood Paints 22

Lux Varnish Lux Varnish is a modified, clear alkyd varnish. It is used to paint wood works, including kitchens, furniture and boats. It boasts superior gloss, high hardness, adhesion, and supreme resistance to home chemicals (alcohol, grease, and oils.etc) and weather conditions. Finish Viscosity Density Gloss Dilution Repainting Time high gloss. 4 4.5 minutes / Ford Cup # 4 / 25º C. 0.91 ± 0.02 %. at least 85 degree. mineral or vegetarian oil benzene 40 60 minutes at 25º C. after 16 18 hours of painting the first coat. Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P320. Repaint Vniwood Sealer multiple times to get a polished surface. Dilute the varnish with mineral or vegetarian oil by 5 10 % in case of using the brush or benzene in case of spraying with the gun. Lux varnish can be repainted after 16 18 hours of painting the first coat. Specially formulated to be used in painting wood works, including kitchens, furniture and boats. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 925 gm. 3 kg. 23 Mido Wood Paints International Group of Modern Coatings (MIDO)

Mido Star Lux Varnish Mido Star Lux Varnish is an economical, clear alkyd varnish. It is used to paint wood works, including kitchens, furniture and boats. It boasts superior gloss, fast drying, excellent hardness, easy application and maximum resistance to weather conditions. Finish Viscosity Density Gloss Dilution Repainting Time high gloss 6500 7000 centipoise. 0.88 ± 0.02 %. at least 85 degree mineral or vegetarian oil benzene. Surface Drying: 100 120 minutes at 25º C. Complete Drying: 3 4 hours at 25º C. after 16 18 hours of painting the first coat. Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P320. Repaint Vniwood Sealer multiple times to get a polished surface. Dilute the varnish with mineral or vegetarian oil by 15 20 % in case of using the brush or benzene in case of spraying with the gun. Mido Star Lux varnish can be repainted after 16 18 hours of painting the first coat. Specially formulated to be used in painting wood works, including kitchens, furniture and boats. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 800 gm. 3 kg. www.midoco.com Mido Wood Paints 24

Vniwood Varnish Vniwood Varnish is a high-quality Nitrocellulose varnish, based on specially-formulated alkyd resins. This product boasts high transparence, excellent gloss, fast drying, superior hardness and scratch resistance. Density 1 ± 0.1 gm. / cm 3. Viscosity 2000 3000 centipoise / 25º C. Surface Drying: 15 minutes at 25º C. Complete Drying: 30 minutes at 25º C. Gloss glossy, semi-glossy and matt. Thinner Proper Duco Thinner. Finish Clear Sand the surface well. Spray 2 coats of Vniwood Sealer, and then one coat of Jet Sealer. Sand the surface well after complete drying. Apply Sofa Stain. Dilute Vniwood Varnish with a suitable Duco thinner to get suitable spraying viscosity. Apply it using spraying gun diameter nozzle (1.5 1.8) mm. Spray 2 coats of the varnish, leaving 5 10 minutes flash-off time between coats. Specially formulated to be used in painting wood works, including kitchens, furniture and boats. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1050 gm. 36 kg. 25 Mido Wood Paints International Group of Modern Coatings (MIDO)

Jet Varnish Jet Varnish is a high-quality Nitrocellulose varnish, based on specially-formulated alkyd resins. This product boasts high transparence, excellent gloss, fast drying, superior hardness and scratch resistance. Density 1 ± 0.1 gm. / cm 3. Viscosity 2000 3000 centipoise / 25º C. Surface Drying: 15 minutes at 25º C. Complete Drying: 30 minutes at 25º C. Gloss glossy, semi-glossy and matt. Thinner Proper Duco Thinner. Color Clear Sand the surface well. Spray 2 coats of Vniwood Sealer, and then one coat of Jet Sealer. Sand the surface well after complete drying. Apply Sofa Stain. Dilute Jet Varnish with a suitable Duco thinner to get suitable spraying viscosity. Apply it using spraying gun diameter nozzle (1.5 1.8) mm. Spray 2 coats of the varnish, leaving 5 10 minutes flash-off time between coats. Specially formulated to be used in painting furniture, kitchens, and other wood works. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1/2 kg 4 kg 15 kg. www.midoco.com Mido Wood Paints 26

Soft Matt Varnish Soft Matt Varnish is a high-quality matt nitrocellulose varnish, based on specially-formulated alkyd resins with special additives to give attractive matt finish, smooth touch and high resistance to friction and scrubbing. Finish Clear Specific Gravity 0.92 kg /liter. Viscosity 4 minutes at 25º C. Gloss matt (5%). Repainting Time Surface Drying: 15 minutes at 25º C. Complete Drying: 30 minutes at 25º C. 5 minutes. Using spray gun nozzle diameter 1.5 1.8. Air pressure: 3 4 bar. Spray viscosity: 18 20 seconds using Ford Cup No. 4 at 25º C. Coats: 2 coats. Specially formulated to be used in painting wood and furniture to give attractive matt finish, smooth touch and high resistance to friction and scrubbing. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 950 gm. 3.5 kg. 27 Mido Wood Paints International Group of Modern Coatings (MIDO)

Soft Touch Varnish Soft Touch Varnish is a high-quality semi-gloss nitrocellulose varnish, based on speciallyformulated alkyd resins with special additives to give attractive semi-gloss finish, smooth touch and high resistance to friction and scrubbing. Finish Clear Solid Content by Weight 37 ±1 %. Specific Gravity 0.9 kg /liter. Viscosity 4 minutes at 25º C. Gloss semi-gloss (25 30%). Repainting Time Surface Drying: 15 minutes at 25º C. Complete Drying: 30 minutes at 25º C. 15 minutes. Using spray gun nozzle diameter 1.5 1.8. Air pressure: 3 4 bar. Spray viscosity: 18 20 seconds using Ford Cup No. 4 at 25º C. Coats: 2 coats. Specially formulated to be used in painting wood and furniture to give attractive semiglossy finish, smooth touch and high resistance to friction and scrubbing. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 950 gm. 3.5 kg. www.midoco.com Mido Wood Paints 28

Mido Duco Varnish Mido Duco is a high-quality Nitrocellulose varnish, based on specially-formulated alkyd resins. This product boasts high transparence, excellent gloss, fast drying, superior hardness and scratch resistance. Finish Clear Color all colors. Specific Gravity white 1 colors 0.96. Viscosity 2500 3000 centipoise / 25º C. Surface Drying: 15 minutes at 25º C. Complete Drying: 30 minutes at 25º C. Repainting Time 5 minutes Sand the surface well. Spray 2 coats of Vniwood Sealer, and then one coat of Jet Sealer. Sand the surface well after complete drying. Apply Sofa Stain. Dilute Mido Duco Varnish with a suitable Duco thinner to get suitable spraying viscosity. Apply it using spraying gun diameter nozzle (1.5 1.8) mm. Spray 2 coats of the varnish, leaving 5 10 minutes flash-off time between coats. Specially formulated to be used in painting furniture, kitchens, and other wood works. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1 kg 3 kg. 29 Mido Wood Paints International Group of Modern Coatings (MIDO)

Polyurethane Varnish 1:1 Polyurethane Varnish 1:1 is a high-quality polyurethane varnish (gloss - semi-gloss matt), based on two components of high-quality resins and special additives to give maximum performance and can be sanded after 24 hours. It boasts smooth touch, high hardness, flexibility and resistance to weathering and and scrubbing. Raw Materials Film Thickness Coverage Rate Mixing Ratio Available time for repainting after mixing Flash-off time resins solvents special additives. (at a film thickness of 50-60 micron / air drying 25º C.) Surface Drying: 2 hours at 25º C. Complete Drying: 4 6 hours at 25º C. 50 60 micron per coat. 6 8 m 2 / liter. 1 polyurethane varnish : 1 polyurethane hardener + 25 % polyurethane thinner. 3-4 hours at 25º C. 5 minutes between coats. The surface must be clean and free of dust, grease and oil. Sand the surface well using sandpaper No. 320. Spray new surfaces with Polyester Sealer or Polyurethane Sealer, and sand it with sandpaper No. 320 to get a smooth surface. Then, spray Polyurethane Varnish. Sand old surfaces with sandpaper No. 1000, and then spray the varnish. Using spray gun nozzle diameter (1.5 1.8 mm), and air pressure (3 4 bar). Spray viscosity: 18 20 seconds at 25º C. Number of Coats: 2 coats. Polish the surface after 24 hours to get smooth and attractive surface. Specially formulated to be used in painting furniture, kitchens and other wood works, whether interior or exterior. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 850 gm. 4.5 kg. 31 Mido Wood Paints International Group of Modern Coatings (MIDO)

Polyurethane Varnish 2:1 Polyurethane Varnish 2:1 is a high-quality polyurethane varnish (gloss - semi-gloss matt), based on two components of high-quality resins and special additives to give maximum performance and can be sanded after 24 hours. It boasts smooth touch, high hardness, flexibility and resistance to weathering and scrubbing. Raw Materials Mixing Ratio Available time for repainting after mixing resins solvents special additives. 2 polyurethane varnish : 1 polyurethane hardener + 25 % polyurethane thinner. 3-4 hours at 25º C. (at a film thickness of 50-60 micron / air drying 25 º C.) Surface Drying: 1 hour at 25º C. Complete Drying: 24 hours at 25º C. Film Thickness 55 70 micron per coat. Coverage Rate 6 8 m 2 / liter. The surface must be clean and free of dust, grease and oil. Sand the surface well using sandpaper No. 320. Spray new surfaces with Euro Ester Sealer, and sand it with sandpaper No. 320 to get a smooth surface. Then, spray Polyurethane Varnish. Sand old surfaces with sandpaper No. 1000, and then spray the varnish. Specially formulated to be used in painting furniture, kitchens and other wood works, whether interior or exterior. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 800 gm. 4 kg. Application: Using spray gun nozzle diameter: 1.5 1.8 mm. Air pressure: 3 4 bar. Spray viscosity: 18 20 seconds at 25º C. Number of coats: 2 coats. Flash-off time: 5 minutes between coats. Polish the surface after 24 hours to get smooth and attractive surface. www.midoco.com Mido Wood Paints 32

WOOD FILLERS & SURFACERS Jet Filler 1k 35 Jet Surfacer 36 Polyurethane Surfacer 37

Jet Filler 1K Jet Filler 1K is a one-component fillerused to paint car panels. It is also used as a foundation on wood surfaces. It boasts maximum filling of wood pores as well as fast drying. Finish Filler Colors all colors Specific Gravity 1.4 gm. / cm 3. Viscosity 25.000 centipoise at 25º C. : Surface Drying: 15 minutes. Complete Drying: 2 hours. Flash-off Time 15 minutes Using spray gun nozzle diameter: 1.8 2 mm. Spraying Pressure: 3 4 bar. Spraying viscosity: 30 35 seconds using Ford Cup at 25º C. No. of coats: 2 3 coats. Specially formulated to be used in repainting modern cars, metal surfaces, and furniture. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1500 gm. 35 Mido Wood Paints International Group of Modern Coatings (MIDO)

Jet Surfacer Jet Surfaceris specially formulated from nitrocellulose and resins to be used directly before the top coat to get smooth and soft surface. This product boasts easy sanding and excelling filling properties for wood and metal to give smooth surface after sanding, avoiding matt touch in the top coat. Finish Matt Colors All basic colors Specific Gravity 1.4 gm. /cm 3 Viscosity 25.000 centipoise at 25º C Surface Drying: 15 minutes. Complete Drying: 30 minutes. Flash-off time 15 minutes. Use the spray gun (Nozzle: 1.8 2 mm / air pressure: 3 4 bar) in application after diluting paint with proper Nitrocellulose thinner till attaining the desired viscosity. Specially formulated to be used in painting wood and metal works after putty to give smooth surface. 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1350 gm. 5 kg. www.midoco.com Mido Wood Paints 36

Polyurethane Surfacer Polyurethane Surfacer 2K with hardeneris specially formulated to be used directly before the top coat to give smooth and soft surface. This product boasts excelling filling properties for wood to give smooth surface after sanding, avoiding matt touch in the top coat. The surface becomes ready for painting 2K products. Finish Matt Colors All basic colors. Specific Gravity 1.4 gm. /cm 3. Viscosity 15.000 centipoise at 25º C. Surface Drying: 2 hours. Complete Drying: 4 6 hours. Flash-off time 5 minutes. Application tools: Use the spray gun (Nozzle: 1.8 2 mm / air pressure: 3 4 bar) in application after mixingsurface with hardener at rate 2:1 and then diluting withnitrocellulose thinner till attaining the desired viscosity. Specially formulated to be used in painting wood after putty to get smooth surface. 1 year from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1350 gm. 5 kg. 37 Mido Wood Paints International Group of Modern Coatings (MIDO)

WOOD DECORATIVE PAINTS Hammer Finish Atlanta 2000 41 Crackle Paint 42

Hammer Finish Atlanta 2000 Hammer Finish Atlanta 2000 is high gloss enamel, specially formulated from alkyd resin and aluminum paste with high-quality additives,featuring an excellent hammered pattern. It boasts fast drying, excellent mechanical properties and supreme resistance to weathering without any impact on paint finish. Color Available in all colors except white. Density 1± 0.1 gm. / cm 3 Dilution 25 30 % (using good thinner). Surface Drying: 20 25 minutes. Complete Drying: 2 3 hours. Coverage Rate Gloss 8 10 cm 3 / kg. 85 ± 5 at 60O. It's an ideal paint for tools, machinery, and other industrial uses. Sand the surface well. Ensure that the surface to be painted is free from dust, grease and other contaminations. 12 months from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1 kg 4 kg 15 kg. 41 Mido Wood Paints International Group of Modern Coatings (MIDO)

Crackle Paint Crackle is a decorative nitrocellulose matt paint, especially formulated from high-quality resins and additives to give special effects similar to crocodile leather in its appearance. To get the best crackle effect, you should follow these instruction: Spray duco paint (Midoduco Jet) according to the required color. Dilute the Crackle paint with proper duco thinner: 20 25%. Spraying distance: 30 40 cm. Pressure: 1.5 2 bar. Nozzle diameter: 1.8 2 mm. In case of distance less than 30 cm, you can obtain wide crackle effect. In case of distance more than 40 cm, you can obtain narrow crackle effect. Color Viscosity Dilution 12 colors 1500 2000 centipoise. Using proper nitrocellulose thinner. 10 15 minutes. Used in painting all wood works. 12 months from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 1 kg 4 kg. www.midoco.com Mido Wood Paints 42

WOOD GLUE Jet (Clear Glue) 45 Jet (White Glue) 46

Jet (Clear Glue) It's clear glue, manufactured from high quality materials and characterized by its perfect adhesion. It is suitable for adhering wood, papers, and cartons. It is characterized by fast dry. Finish Clear Surface Dry: 10 15 min. Completely Dry: 60 min. It is suitable for adhering wood, papers, and cartons. Surface Preparation: Surface should be clean and free of dust, grease, and oil. 1 year from the date of production in the original, tightly-sealed package. provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 900 gm. Surface should be clean and free of dust, grease, and oil. Dilute by water till getting better consistence. The diluted glue must be used completely. After diluting the glue with water, put a suitable amount on the surface and press well. 45 Mido Wood Paints International Group of Modern Coatings (MIDO)

Jet (White Glue) It's white glue, manufactured from high quality materials and characterized by its perfect adhesion. It is suitable for adhering wood, papers, and cartons. It is characterized by fast dry. Finish White Surface Dry: 10 15 min. Completely Dry: 60 min. It is suitable for adhering wood, papers, and cartons. Surface Preparation: Surface should be clean and free of dust, grease, and oil. 1 year from the date of production in the original, tightly-sealed package. provided storing in proper conditions at 25º C and 65% of relative humidity. Packaging: 900 gm. Surface should be clean and free of dust, grease, and oil. Dilute by water till getting better consistence. The diluted glue must be used completely. After diluting the glue with water, put a suitable amount on the surface and press well. www.midoco.com Mido Wood Paints 46