P5Ch5StandardCosting

Similar documents
COST AND MANAGEMENT ACCOUNTING

AAT LEVEL 3 LESSON 7. Association of Accounting Technicians (AAT) Example Course Materials

Understanding Variance Analysis By: Helen O Brien Gately B Comm; MAcc; FCA. Examiner: Formation 2 Management Accounting

elements of costs like material, labour and expenses can be classified into direct and indirect. They are mentioned below. i. Direct and Indirect

Module Title: Management Accounting 2

ACCA Certified Accounting Technician Examination Paper T7. Section A. 2 C ($200,000 ($200, x 0 15)) = $50,000

Lesson-13. Elements of Cost and Cost Sheet

Paper F2. Management Accounting. Fundamentals Pilot Paper Knowledge module. The Association of Chartered Certified Accountants. Time allowed: 2 hours

MANAGEMENT ACCOUNTING

Paper 3A: Cost Accounting Chapter 9 CA. Dharmendra Gupta

Managing Working Capital

NON-INTEGRAL OR COST LEDGER ACCOUNTING SYSTEM

BASIC CONCEPTS AND FORMULAE

Society of Certified Management Accountants of Sri Lanka

C01-Fundamentals of management accounting

29.1 COST SHEET : MEANING AND ITS IMPORTANCE

CASH BUDGETS AND RELATED TOPICS

COST CLASSIFICATION AND COST BEHAVIOR INTRODUCTION

Paper F2. Management Accounting. Pilot Paper from December 2011 onwards. Fundamentals Pilot Paper Knowledge Module

Management Accounting

Working Capital Concept & Animation

Management Accounting 2 nd Year Examination

Paper MA2. Managing Costs and Finance FOUNDATIONS IN ACCOUNTANCY. Specimen Exam applicable from June 2014

Job, Batch and Process Costing

Management Accounting 2 nd Year Examination

Marginal Costing and Absorption Costing

Company Accounts, Cost and Management Accounting

Answer to PTP_Intermediate_Syllabus 2012_Dec2013_Set 3

Valuation of Inventories

Management Accounting 2 nd Year Examination

Institute of Certified Management Accountants of Sri Lanka. Operational Level November 2012 Examination

Unit Title: Managerial Accounting Unit Reference Number: D/502/4812 Guided Learning Hours: 160 Level: Level 5 Number of Credits: 18

Marginal and. this chapter covers...

Paper F2. Management Accounting. Specimen Exam applicable from June Fundamentals Level Knowledge Module

Decision Making using Cost Concepts and CVP Analysis

7 Management of Working Capital

COST ACCOUNTING STANDARD ON OVERHEADS

12 Marginal Costing Definitions

MGT402 - Cost & Management Accounting Glossary For Final Term Exam Preparation

How To Understand Cost Volume Profit Analysis

Explain the characteristics of different types of cost classifications and their use in costing.

Revisionary Test Paper_Interrmediate_Syllabus 2012_Dec 2015 Paper 8: Cost Accounting & Financial Management

PAPER 19: Cost and Management Audit

Cost and Management Accounting. Students Manual

PAPER 4 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING QUESTIONS

REVISIONARY TEST PAPER

2006 Accounting. Higher Solutions. Finalised Marking Instructions

International Accounting Standard 2 Inventories

MANAGEMENT ACCOUNTING

Advanced Variance Analysis: Calculation and Interpretation

How To Calculate Overhead Absorption Rate For A Business

PREFACE TO COST ACCOUNTING STANDARD BOARD

NATIONAL UNIVERSITY OF SCIENCE AND TECHNOLOGY

ACG 3024 Accounting for Non-Financial Majors Homework Portfolio Study Guide

Cost VOLUME RELATIONS & BREAK EVEN ANALYSIS

Learning Curve Theory

University of Waterloo Final Examination

COST ACCOUNTING : AN INTRODUCTION

(CAS-4) COST ACCOUNTING STANDARD ON COST OF PRODUCTION FOR CAPTIVE CONSUMPTION

NEPAL ACCOUNTING STANDARDS ON INVENTORIES CONTENTS Paragraphs

REVIEW FOR EXAM NO. 1, ACCT-2302 (SAC) (Chapters 16-18)

Marginal and absorption costing

ACCOUNTING FOR AND AUDIT OF INVENTORIES

Inventories Level I Financial Reporting and Analysis. IFT Notes for the CFA exam

Process costing. Expected output in units

NATIONAL UNIVERSITY OF SCIENCE AND TECHNOLOGY FACULTY OF COMMERCE GRADUATE SCHOOL OF BUSINESS GENERAL MASTER OF BUSINESS ADMINISTRATION

(b) financial instruments (Ind AS 32, Financial Instruments: Presentation and Ind AS 109, Financial Instruments and ); and

Questions 1, 3 and 4 gained reasonable average marks, whereas Question 2 was poorly answered, especially parts (b),(c) and (f).

Summary. Chapter Five. Cost Volume Relations & Break Even Analysis

MARGINAL COSTING. Sales *** Less:-Variable cost *** Contribution *** Less:- Fixed cost *** Profit ***

Indian Accounting Standard (Ind AS) 2 Inventories. Cost of agricultural produce harvested from biological assets 20

Management Accounting (F2/FMA) September 2015 (for CBE exams from 23 September 2015) to August 2016

Analysis of Inventories. Inventory: Asset or Expense?

chapter - 4 inventories The Institute of Chartered Accountants of India

National Quali cations EXEMPLAR PAPER ONLY

The following information has been obtained in relation to the contract:

2013 Accounting. Higher - Solutions. Finalised Marking Instructions

Paper MA1. Management Information FOUNDATIONS IN ACCOUNTANCY. Specimen Exam applicable from June 2014

- 1 - Cost Drivers. Product Diversity - Difference in product size, product complexity, size of batches and set-up times cause product diversity.

QUESTION PAPER May 2013

Paper P2 Management Accounting Decision Management

International Accounting Standards

Accounting 402 Illustration of a change in inventory method

Paper F5. Performance Management. Monday 3 December Fundamentals Level Skills Module. The Association of Chartered Certified Accountants

LESSON 11 MARGINAL COSTING CONTENTS

Section A Fundamentals of Accountancy,Chapter 4 CA (Dr.) Akash Gupta FCA, M.COM, PHD

Fundamentals Level Skills Module, Paper F5. 1 Hair Co. (a)

UNIVERSITY OF BOLTON BUSINESS SCHOOL ACCOUNTANCY SEMESTER 1 EXAMINATION 2015/2016 MANAGEMENT ACCOUNTING AND DECISION MAKING MODULE NO: ACC5002

Welcome to workshop on revised schedule VI. K. Chandra Sekhar Company Secretary Ace Designers Limited, Bangalore

tutor2u tutor2u Interactive Business Simulations Finance: Cash Flow Management

Chapter 9: Inventories. Raw materials and consumables Finished goods Work in Progress Variants of valuation at historical cost other valuation rules

Fundamentals Level Skills Module, Paper F5

Management Accounting (F2/FMA) February 2013 to January 2014

HKAS 2 Revised July 2012February Effective for annual periods beginning on or after 1 January Hong Kong Accounting Standard 2.

MINISTRY OF COMMUNICATION AND INFORMATION

Fundamentals Level Skills Module, Paper F5. Section A

INTERMEDIATE GROUP - II PAPER 8 COST MANAGEMENT ACCOUNTING. The Institute of Cost Accountants of India 12, SUDDER STREET, KOLKATA

Stock levels Opening Stock Closing Stock Direct Materials (units) 1, Finished Goods(units) 2,400

KB 2 Business Management Accounting Suggested Answers and Marking Guide

Paper P1 Performance Operations Post Exam Guide March 2011 Exam. General Comments

Transcription:

P5Ch5StandardCosting

Standard means a criterion or a yardstick against which actual activity can be compared to determine the difference between the two. Standard cost is the pre-determined cost based on technical estimates for materials, labour and overhead for a selected period of time for a prescribed set of working conditions. Standard Costing is the preparation and use of standard costs, their comparison with the actual costs and the analysis of variances to their causes and points of incidence.

APPLICABILITY OF STANDARD COSTING Where a sufficient volume of standard products or components is produced. Where Methods, operations and processes are capable of being standardised. Where a sufficient number of costs are capable of being controlled.

Advantages of Standard Costing Facilitates Planning Facilitates Cost Control Facilitates Coordination Reveals the areas of avoidable, wastages & losses, idle capacity Limitations of Standard Costing Settling of Accurate Standards Revision of standards Expensive Non facilitate cost reduction

STEPS INVOLED IN STANDARD COSTING Setting up of Standards Ascertainment of Actual Costs Comparison of Standard and Actual Costs to determine Variances, and Investigation of variances and taking appropriate action thereon wherever necessary

Variance Analysis Variances Variance analysis is the analysis of the cost variance into its components parts and the explanation of variances Expectations Less Actuals Cost Variance Expected / Standard Cost Less Actual Cost Sales Variance Expected / Budgeted Sales Less Actual Sales

Based on Classification 1. Type of Cost a) Material b) Labour & c) Overheads 2. Casual Factor a) Variances of Efficiency b) Variances of Prices c) Variances of Volume 3. Impact on profit a) Favourable b) Adverse

STEPS TO REMEMBER: 1) Period : Standard or budgeted period and actual period must be same, if period are different then we have to revise budget for actual period. 2) Table. 3) Mix Variances : Actual Sales quantity in standard ratio. 4) Variances.

Steps 1) Period = Budgeted & Actual should be same 2) Table : Budgeted Actual Product Qty. Price Rs. Product Qty. Price Rs. A 1000 10 10,000 A 1100 9 9,900 B 2000 20 40,000 B 3400 19 64,600 3000 50000/3000 50,000 4500 74,500 3) Mix Variances : Actual Quantity in Standard Ratio 4) Variances : 4500 ( 1 : 2) A B 1500 3000 Sales Value Variances = 50,0000 74,500 = 24,500 (F) Sales Price Sales Volume A 1100 (10-9) = 1100 (A) A 10 (1000 1100) = 1000 (F) B 3400 (20-19) = 3400 (A) B 20 (2000 3400) = 28000 (F) 4500 (A) 29000(F) Sales Mix Variances Sub Volume A 10 (1500 1100) = 4000 (A) 50,000 * (3000 4500) B 20 (3000 3400) = 8000 (F) 3000 4000(F) = 25000 (F)

POINTS TO REMEMER : Selling Price Variances Sales Volume Variance We have to compare standard selling price with actual selling price and difference is X by actual sales quantity. We have to compare standard sales quantity with actual sales quantity and difference is X by standard selling price. Mix Variances We have to compare actual sales quantity in standard ratio with actual sales quantity and difference is X by Standard Selling Price Sub Volume Variances We have to compare total standard quantity with total actual quantity and difference is X by Weighted Average Standard Selling Price

PROFIT VARIANCES Illustrations: Toys Ltd. had budgeted the following for a month: Toy X 900 units at Toy Y 600 units at Toy Z 1500 units at Rs. 50 per unit Rs. 100 per unit Rs. 75 per unit As against this, the actual sales were : Toy X 1000 units at Toy Y 700 units at Toy Z 1100 units at Rs. 55 per unit Rs. 95 per unit Rs. 78 per unit The standard costs per unit & Actual costs per unit Toy X Rs. 45 per unit Toy Y Rs. 85 per unit Toy Z Rs. 65 per unit Toy X Rs. 50 per unit Toy Y Rs. 80 per unit Toy Z Rs. 70 per unit Compute necessary profit variances & Analysis of profit variances.

PROFIT VARIANCES Steps No. 1 to 4 of Sales Variances remains same in Profit Variances also. 1) Period : Budgeted and Actual Should be Same. 2) Table Budgeted Per Unit Product Quantity Selling Price Cost Profit Total Profit x 900 50 45 5 = 4,500 y 600 100 85 15 = 9,000 z 1500 75 65 10 = 15,000 3000 28500 / 3000 = Rs.9.50 28,500 Actual Per Unit Product Quantity Selling Price Cost Profit Total Profit x 1000 55 50 5 = 5,000 y 700 95 80 15 = 10,500 z 1100 78 70 8 = 8,800 2800 24,300 3) Actual Sales in Standard Ratio : 2,800 (9 : 6 : 15) X (9 / 30) Y (6 / 30) Z (15 / 30) 840 560 1400 4) Variances :

4) Variances : Profit Variance = 28,500 24, 300 = 4,200 (A) PV due to change PV due to change in Sales in cost (WN 1) 2800 (F) 7000 (A) Selling Price Variance Profit Volume Variance x 1000 (50-55) = 5000 (F) x 5 (900 1000) = 500 (F) y 700 (100-95) = 3500 (A) y 15 (600 700 ) = 1500 (F) z 1100 ( 75 78) = 3300 (F) z 10 (1500 1100) = 4000 (A) 4800 (F) 2000(A) Profit Mix Variance Profit Sub Volume Variance x 5 ( 840 1000 ) = 800 (F) y 15 ( 560 700 ) = 2100 (F) 9.50 ( 3000 2800 ) z 10 ( 1400 1100 ) = 3000 (A) = 1900 (A) 100 (A) WN1) PV due to change in Cost x y z 1000 (45 50 ) = 5000 (A) 700 (85 80 ) = 3500 (F) 1100 (65 70) = 5500 (A) 7000 (A)

I. As per Marginal Costing there is only in One Variance i.e. Fixed Overheads Variances Fixed Overhead Expenditure = Budgeted Overhead - Actual Overhead II. As per Absorption Costing the variances are as follows : 1) Period : Budgeted and Actual Should be Same. 2) Table : Budgeted Actual Output Rate Overhead Output Overhead 25000 4 1,00,000 24000 1,10,000 Days Rate Overhead Days 250 400 1,00,000 252 Hours Rate Overhead Hours 1,25,000 0.80 1,00,000 Gross 1,24,000 Idle (1,000) Net 1,23,000 3) Capacity (in terms of Hours) 4) Efficiency (in terms of Output) Efficiency (in terms of Hours) OR Days Hrs Hours Output Output Hours 250 1,25,000 1,25,000 25,000 25000 1,25,000 252? 1,23,000? 24000? (1,26,000) (24,600) (1,20,000)

5) Variances : Fixed Cost Variance = Absorption overhead Actual Overhead = (24,000 x 4) 1,10,000 = 96,000 1,10,000 = 14,000 (A) Expenditure Variance Volume Variance Budgeted Overhead Actual Overhead = 4 x (25000 24000) = 1,00,000 1,10,000 = 4000 (A) = 10,000 (A) OR = Absorption Rate (Budgeted Output) Actual Output = Budgeted Overhead Absorption Amount = 1,00,000 96,000 = 4,000 (A)### Calendar Variance Capacity Variance Idle Efficiency ( in terms of Hours) (in terms of Output) = 400 ( 250 252) = 0.80 ( 1,26,000 1,24,000) = 1000 x 0.80 = 4 (24,600 24,000) = 800 (F) = 1600 (A) = 800 (A) = 2,400 (A) (Always) OR Efficiency (in terms of Hours) = 0.80 (1,20,000 1,23,000) = 2,400 (A) Note : ### How do we know that Volume Variance is Favorable or Adverse? Ans : If we absorption amount is < budgeted overhead, that means actual output is < budgeted output. Therefore the corresponding variances are adverse.

MATERIAL COST VARIANCE 1) Output : Given Standard = 80 Units whereas Actual = 400 Units Therefore we have to make Revised Standard which is = 400 Units 2) Table : Given Standard Revised Standard Actual Type Qtuantity Price Quantity Price Rs. Quantity Price Rs. x 50 4 250 4 1,000 300 5 1,500 y 50 8 250 8 2,000 350 7 2,450 INPUT 100 500 3000 / 500 = 6 3,000 650 3,950 Loss (20) (100) (250) OUTPUT 80 400 400 3) Standard Quantity for Actual Output Output Input 80 100 400? (500) 4) Actual Input Quantity in Standard Ratio 650 (1 :!) X( 1 / 2 ) Y ( 1 / 2 ) 325 325 5) Variances :

5) Variances : MATERIAL COST VARIANCES = ( 3000 3950 ) = 950 (A) Price Variance Usage Variance x 300 ( 4 5 ) = 300 (A) x 4 ( 250 300 ) = 200 (A) y 350 ( 8 7 ) = 350 (F) y 8 ( 250 350 ) = 800 (A) 50 (F) 1000 (A) Mix Variance Sub Usage Variance / Yield Variance / Input Method x 4 ( 325 300 ) = 100 (F) = 6 ( 500 650 ) y 8 ( 325 350 ) = 200 (A) = 900 (A)** 100 (A) ** Alternative ways of Solving Sub Usage Variance / Yield Variance / Input Method : Loss Method Output Method Mix Method Normal Loss = 650 x 20 % = 130 Normal Output = 650 x 80 % x 4 ( 250 325 ) = 300 (A) Abnormal Loss = 130 250 = 120 = 520 y 8 ( 250 325 ) = 600 (A) 900 (A) 3000 x 120 = 900 (A) 3000 x ( 520 400 ) = 900 (A) 400 400

Steps to follow for Material Cost Variances : 1) Output 2) Table 3) Standard Input quantity for Actual Output 4) Actual Input quantity in Standard Ratio 5) Variances Points to Remember : 1) If given Standard & Actual Output are given in batches, then we have to prepare Revised Standard for Actual number of batches. 2) If Output of given Standard & Actual are different then we have to prepare Revised Standard for Actual Output 3) If given Standard Total Input quantity is given in terms of ratio or percentage, then it is better to presume that given Standard Input quantity is 100.

4) If information is given in question regarding Opening Stock of Raw Materials and Closing Stock of Raw Materials or both, then Actual Purchase & Consumption quantity are different. Therefore we have to follow either Single Plan or Partial Plan for MATERIAL PRICE VARIANCE. 5) Single Plan vs. Partial Plan Particulars Single Plan Partial Plan 1) Material Price Vari. Actual Purchase Qty Actual Consumption Qty. 2) Valuation of Stock Standard Price Actual Price 3) Method of Valuation of Stock FIFO, LIFO are IRRELEVANT, FIFO,LIFO are RELEVANT 6) If information is given in question regarding Opening Work in Progress or Closing Work in Progress or both, then Actual Output means Actual Equivalent Output (Prepare as per Process Costing).

MATERIAL COST VARIANCE Illustration : MJ Ltd. manufactured product A, each unit of which requires 2 kgs. of raw materials P1 & 3 kgs. of raw materials P2, to be bought at Rs.5/- & Rs. 10/- respectively. During the year, the company completed the production of 9600 units & it had 4000 units in closing work-in-progress which are estimated to be 60% complete as regards raw material. The details about purchases & stocks are given below:- Particulars Type Qty. Actual Price 1 Opening Stock P1 4,000 Rs.6/- P2 8,000 Rs.8/- 2 Purchases P1 28,000 Rs.4.50/- P2 34,000 Rs.11/- 3 Closing Stock P1 6,000? P2 10,000? You are required to calculate necessary material cost variances based on: (i) Single Plan (ii) Partial Plan

EXAMPLE 1) Actual Equivalent Output : As per FIFO Method Material Particulars Qty Qty % 1) Opening WIP NIL NIL Nil 2) Started & Finished during the year 9600 9600 100 3) Closing WIP 4000 2400 60 12,000 2) Statement Showing Given Standard and Revised Standard : a) OUTPUT : Given Standard = 1 Unit Actual Output = 12,000 Units Revised Standard = 12,000 Units b) TABLE : Given Standard Revised Standard Type Kgs. Price Kgs. Price Rs. P1 2 5 24,000 5 1,20,000 P2 3 10 36,000 10 3,60,000 60,000 8 4,80,000 i ) Variances based on Single Plan Table: Actual Particulars Qty. Price Rs. P1 Opening Stock RM 4000 5 20,000 Add: Purchases 28,000 4.50 1,26,000 Less: Closing Stock RM (6000) 5 (30,000) A 26000 1,16,000 P2 Opening Stock RM 8000 10 80,000 Add: Purchases 34000 11 3,74,000 Less: Closing Stock RM (!0000) 10 (!,00,000) B 32000 3,54,000 TOTAL (A + B) 58000 4,70,000 ===== ========

EXAMPLE (Continue) c) Actual Input quantity in Standard Ratio 58,000 ( 2 : 3 ) P1 P2 23,200 34,800 d) Variances : MATERIAL COST VARIANCES = ( 4,80,000 4, 70,000 ) = 10,000 (F) Price Variance Usage Variance P1 28,000 ( 5 4.50 ) = 14,000 (F) P1 5 ( 24,000 26,000 ) = 10,000 (A) P2 34,000 ( 10 11 ) = 34,000 (A) P2 10 ( 36,000 32,000 ) = 40,000 (F) 20,000 (A) 30,000 (F) Mix Variance Material Yield Variance P1 5 ( 23,200 26,000 ) = 14,000 (A) = 8 ( 60,000 58,000 ) P2 10 ( 34,800 32,000 ) = 28,000 (F) = 16000 (F) 14,000 (F)

EXAMPLE (Continue) ii) a) Variances based on Partial Plan Stock Valuation based on FIFO Method Table : Actual Particulars Qty Price Amount P1 Opening Stock of RM 4000 6 24,000 Add : Purchases 28000 4.50 1,26,000 Less : Closing Stock of RM (6000) 4.50 (27,000) A 26,000 1,23,000 P2 Opening Stock of RM 8,000 8 64,000 Add : Purchases 34,000 11 3,74,000 Less : Closing Stock of RM (10,000) 11 (1,10,000) B 32,000 3,28,000 Consumption ( A + B ) 58,000 4,51,000 ===== ======= b) Variance : Material Cost Variance = 4,80,000 4,51,000 = 29,000 (F) Price Variance Usage 1000 (A) (WN 1) 30,000 (F) Mix Variance Yield Variance 14,000 (F) 16,000 (F) WN 1 = Material Price Variance P1 P2 Total Opening Stock 4000 ( 5 6 ) = 4,000 (A) Opening Stock 8000 ( 10 8 ) = 16,000 (F) From Current From Current year purchase 22000 ( 5 4.50 ) = 11000 (F) year purchase 24000 ( 10 11 ) = 24,000 (A) (26,000 4,000) 7,000 (F) (32000 8000) 8,000 (A) 1,000 (A)

LABOUR VARIANCES JVS Ltd. Manufactures product X which requires 2 hours of skilled men, 3 hours of semiskilled men & 5 hours of unskilled men per unit at Rs.5, 3 & 2 per hour respectively. During March, 2012, the production department reported output of 10,000 units of product X. The labour cost incurred was as detailed below TYPE HOURS PAID FOR RATE PER HOUR Skilled 18,000 Rs.7.00 Semi skilled 34,000 Rs.2.75 Unskilled 60,000 Rs.1.50 1,12,000 The total hours paid for included 2,000 idle hours due to machine break down etc, out of which 1,000 hours pertained to skilled men, 800 hours pertained to semi skilled men & balance to unskilled men. a) Calculate labour cost variances b) Recalculate the labour cost variances, given that the break up 2,000 idle hours is not given.

LABOUR VARIANCES 1) Output : Given Standard = 1 Unit, Actual = 10,000 Units, Therefore Revised Standard = 10,000 Units 2) Table : Given Standard Revised Standard Actual Type Hours RPH Hours RPH Rs/ Net Hours Idle Hours Gross Hours RPH Rs. Skilled 2 5 20,000 5 1,00,000 17,000 1000 18,000 7 1,26,000 Semi-Skilled 3 3 30,000 3 90,000 33,200 800 34,000 2.75 93,500 Unskilled 5 2 50,000 2 1,00,000 59,800 200 60,000 1.50 90,000 1,00,000 2.90 2,90,000 1,10,000 2000 1,12,000 3.09,500 3) Actual Hours in Standard Ratio : 1,10,000 ( 2 : 3 : 5 ) Skilled Semi-skilled Unskilled 22,000 33,000 55,000

4) Variances : LABOUR COST VARIANCES = 2,90,000 3,09,500 = 19,500 (A) Rate Variance Time Variance Skilled 18,000 ( 5 7 ) = 36,000 (A) Skilled 5 (20,000 18,000) = 10,000 (F) Semi-skilled 34,000 ( 3 2.75) = 8,500 (F) (A) Semi-skilled 3 (30,000 34,000) = 12,000 Unskilled 60,000 (2 1.50) = 30,000 (F) Unskilled 2 (50,000 60,000) = 20,000 (A) 2.500 (F) 22,000 (A) Idle Mix Variance Efficiency Variance Skilled 1000 x 5 = 5000 (A) Semi-skilled 800 x 3 = 2400 (A) 2.90 x (1,00,000 1,10,000) =29,000 (A) 5 ( 22,000 17,000 ) =25000 (F) 3 ( 33,000 33,200 ) = 600 (A) Unskilled 200 x 2 = 400 (A) 2 ( 55,000 59,800 ) = 9,600 (A) 7,800 (A) 14,800 (F)

VARIABLE OVERHEADS 1) Output : Given Standard = 1 Unit, Actual = 3,500 Units, Revised Standard = 3,500 Units 1) Table: Given Standard Revised Standard Actual Hours RPH Hours RPH Rs. Net Hours RPH Rs. 5 0.30 17,500 0.30 5,250 17,400 5.200 5.200 17,400 3) Variances : VARIABLE OVERHEAD COST VARIANCE = ( 5,250 5,200 ) = 50 (F) Expenditure / Spending Variances Efficiency Variance = 17,400 0.30 5,200 = 0.30 ( 17,500 17,400 ) 17,400 = 30 (F) = 20 (F)