Decorative Laminate Veneer Products Allure & Imprèsa Collections
Antigua Design: Antigua Color: Froth of the Sea Design: Antigua Color: Chocolate Pear Texture: Smooth
Florence Design: Florence Color: Milk Chocolate Design: Florence Color: Monaco
Paris Design: Paris Color: Antique Creme Texture: Smooth Design: Paris Color: Mocha Cherry Texture: Smooth
Roma Design: Roma Color: Dark Chocolate Design: Roma Color: White Chocolate Design: Roma Color: Winter Cherry Texture: High
Five-piece Construction Realistic textures and grain patterns combine with stile & rail construction to provide the overall look and feel of real wood, but at a fraction of the cost. Allure 5-piece doors offer a true visual upgrade to RTF foils, closely resembling real wood doors. Durability Allure products offer increased scratch resistance, far greater than soft, malleable RTF films and even some wood finishes. Utilizing thermally fused melamine panels and a protective polyester resin coating on framing and mouldings, Allure components surpass KCMA and NEMA standards for wear, stain and impact resistance. Dimensionally Stable The MDF substrate used to produce all Allure products has been created to resist the expansion and contraction typically seen with solid wood products. Allure DLV products are engineered for interior use and not intended for exterior environments. Heat Resistant Today s higher BTU cooking surfaces increase chances of delamination of RTF products. The methods used to construct Allure DLV doors virtually eliminate the possibility of delamination during normal everyday use. Tested in an oven to over 200 degrees Fahrenheit, Allure products showed no delamination. Color Fast Allure products resist the fading and darkening commonly seen with wood finishes. You can expect the same degree of color fastness and consistency as experienced with melamine panels. Whether you add new Allure components next month or in a few years, Allure products will closely match the original kitchen color. Environmentally Friendly Allure doors are considered to be green products with no formaldehyde off-gassing from assembled doors and drawer fronts. Allure substrates are made from 100% reclaimed and recycled materials, qualifying for 3 to 5 LEED points and all Allure components are CARB2 compliant. Safe Allure DLV products feature an anti-microbial additive that lasts over the lifetime of the product, inhibiting the growth of bacteria, yeast, mold and mildew. This anti-microbial protection makes Allure products the perfect choice for residential, medical, scholastic, hospitality and governmental environments. Complementary Products Allure colors and patterns were selected keeping in mind that our customers need matching materials to build the rest of their kitchen. Exact match melamine boards can be obtained from Tafisa distributors and matching laminates from Arborite. Mouldings, edgeband, sheet veneers and cut-to-size 6mm panels are all part of Conestoga s standard offering. Design options For your added convenience, Conestoga also offers multiple options such as hinge boring for several brands of concealed hinges, frame only doors to insert your own glass and vertical or horizontal grain direction for your door and drawer front center panels. Textures The Allure program offers a variety of grain textures including smooth, medium and high. Smooth is a satin texture. Medium texture has a genuine wood grain feel embossed into the surface of the product. High texture is accomplished using a revolutionary new process that creates an extraordinary look that has recently become popular in Europe. Smooth Medium High 5-Year Limited Warranty For a period of 5-years from the date of shipment, Allure products will be reasonably free of defects in materials and workmanship. When properly handled, Allure products will conform, within acceptable tolerances, to applicable manufacturing specifications. This limited warranty applies only to those Allure products which are stored, handled, and installed in the manner consistent with Conestoga s wood components. Conestoga will not be responsible or liable for any indirect, consequential or incidental damages or cost sustained by the user. Lead-times (business days) Standard Code Red Code Blue Doors & Drawer Fronts 7 days 3 days 5 days Accessories 3 days 2 days N/A Product Care Allure DLV products should be cleaned using a mild non-abrasive detergent and damp sponge or cloth. Avoid using abrasive cleaners, brushes, rags or cloths and never saturate DLV products with water or other liquids. 3
CARRARA CORTINA MURANO PARMA SAN MARINO
Five-piece Construction Five-piece construction provides the overall look of finished wood doors, but at a 40% cost savings! Imprèsa DLV products are the perfect solution for those customers looking to design and build custom kitchens, baths, closets, laundry rooms, garages and more. Humidity Resistance Because the substrate used to make Imprèsa products is a man made material, it s far more stable than solid wood with almost no expansion or contraction. This makes Imprèsa the perfect solution for high humidity, interior climates. Heat Resistance Delamination issues are a thing of the past with Imprèsa DLV products. Tested to over 200 degrees Fahrenheit, Imprèsa products showed no signs of delamination that can easily occur with RTF products. UV Resistance Imprèsa DLV materials are less susceptible to harmful ultra violet rays that can cause colors to fade. Under normal lighting conditions DLV products will change very little in color or tone. Warranty Information For a period of 1-year from the date of shipment, Imprèsa products will be reasonably free of defects in materials and workmanship. When properly handled, Imprèsa products will conform, within acceptable tolerances to applicable manufacturing specifications. This limited warranty applies only to those Imprèsa products which are stored, handled, and installed in the manner consistent with Conestoga s wood components. Conestoga will not be responsible or liable for any indirect, consequential or incidental damages or costs sustained by the user. Lead-times (business days) Standard Code Red Code Blue Doors & Drawer Fronts 7 days 3 days 5 days Accessories 3 days 2 days N/A Product Care Imprèsa DLV products should be cleaned using a mild non-abrasive detergent and damp sponge or cloth. Avoid using abrasive cleaners, brushes, rags or cloths and never saturate DLV products with water or other liquids. Complementary Products Imprèsa offers a full selection of products to accent nearly any room design. Crown and trim mouldings, fillers, veneer end skins, PVC edgeband and cut-to-size 5/16" matching panels are all part of the Imprèsa program. Design Options Frame only and mullion doors are available in all five door designs. Mullion configurations are available in standard divided lites and 9-lite offsets. Hinge boring for concealed hinges is available and doors and drawer fronts can be ordered with either vertical or horizontal grain center panels. 13