Recycling: Why glass always has a happy ending

Similar documents
How To Do A Complete Life Cycle Analysis Of Packaging

Climate Change and Waste The Missing Link December 2010 Written by Jacob Gregory

A Clear Future. UK glass manufacturing sector decarbonisation roadmap to Summary

Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste

How To Improve The Sustainability Of Packaging

Recycling of end-of-life building glass

EXECUTIVE SUMMARY INTRODUCTION

Conclusions and Summary Report Environmental Life Cycle Assessment of Highway Guard Rail Posts

Mission 9: Recycling

Method to take into account material recycling and end of life in LCA

The new Audi TT Coupé. Life Cycle Assessment

THE ACCOR GROUP S ENVIRONMENTAL FOOTPRINT: AN APPLICATION OF LIFE-CYLE APPROACH TO ASSESS AND MONITOR AN ORGANIZATION ENVIRONMENTAL PERFORMANCE

A guide to solid recovered fuel. Putting waste to good use and producing a sustainable alternative to fossil fuels

A clean energy solution from cradle to grave

Category 5: Waste Generated in Operations

A TruE story On GrEEn PAcKAGInG

Levi Strauss & Co. San Francisco, CA March 2009

Final Report. Life Cycle Impact Assessment of Aluminum Beverage Cans. Aluminum Association, Inc. Washington, D.C. PE Americas.

INDUSTRY INTRODUCTION: PLASTICS

This fact sheet provides an overview of options for managing solid

GYPSUM ASSOCIATION LIFE-CYCLE ASSESSMENT SUMMARY

Procurement Services Branch

The Aluminum Can Advantage Key Sustainability Performance Indicators June 2016

Can ISO standards on LCA support full harmonization? Kurt Buxmann Zürich, Sept. 9, 2014

London Underground Environment Strategy

ET257 GUIDE ENVIRONMENTAL TECHNOLOGY BEST PRACTICE PROGRAMME

THIS BROCHURE CONTAINS 13 RECYCLED TETRA PAK CARTONS*

Embodied CO 2 e of UK cement, additions and cementitious material

2050 LOW CARBON ECONOMY Executive Summary THE EUROPEAN CEMENT ASSOCIATION

White Paper Life Cycle Assessment and Product Carbon Footprint

NOTE: 08/2014 revision corrects issues related allocation & slag and fly ash within the Int. EPD PCR evaluation.

Case Reopened: Reassessing Refillable Bottles (Executive Summary) :: INFORM, Inc.

Tetra Pak. Un pozzo di scienza I.T.I.S. F.Corni

BES 6001 Issue 3 Guidance Document

The European Chlor-Alkali industry: an electricity intensive sector exposed to carbon leakage

It s not just about the environment

NYSDEC Environmental Education

Maximising recycling rates tackling residuals

Closing the concrete loop

Resource Management - The challenges and opportunities in the construction sector Miles Watkins

Low Carbon Emission Supply Network Design and a case in Chinese ICT industry

Swallow Street recycling facts and figures in partnership with Bywaters

TABLET DETERGENTS Towards A More Sustainable Future

Final report. The carbon impact of bottling Australian wine in the UK: PET and glass bottles

Birmingham City University / Students Union Aspects and Impacts Register. Waste. Impacts description

Life Cycle Assessment of a Solid Ink MFP Compared with a Color Laser MFP Total Lifetime Energy Investment and Global Warming Impact

Carbon Sequestration Tool Background and User Guide

Sustainable Manufacturing Seminar. Designing to Sustain the Economy, Environment and Society. Sustainable Product Standards (case-study)

Environmental Performance Data Calculation Standards

Communicating Your Commitment: Your Guide to Clean Energy Messaging

Environmental Project No Miljøprojekt. Waste Indicators. Ole Dall, Carsten Lassen and Erik Hansen Cowi A/S

PET-Bottle-to-Bottle-Recycling Key Success Factors 6 Years Experience in Switzerland


Belgard Pavers Interlocking Concrete Paving Units

How To Promote A Green Economy In The European Constitution

ZERO CARBON HOMES AND NEARLY ZERO ENERGY BUILDINGS. UK Building Regulations and EU Directives

BIG BENEFITS IN SMALL PACKAGING... Unilever s strategy for sustainable packaging

SCRA Sustainability Report 2012/13. Changing f or children and young people

Water Footprint Project

Screening Study of Life Cycle Assessment (LCA) of the Electric Kettle with SimaPro Software***

LIFE CYCLE ASSESSMENT ON COTTON AND VISCOSE FIBRES FOR TEXTILE PRODUCTION

biodegradable raw materials and the products are recyclable after use.

An environmental comparison of paper and plastic labels. Chris Edwards & Gary Parker Intertek Expert Services

Printed circuit board [EDP (0)]

A Green Idea. Reclaiming Urban Wood Waste And Urban Forest Debris. For Fuel/Combustion & Renewable Energy

HUGO BOSS ENVIRONMENTAL COMMITMENT. Our claim. Our approach

Environmental Product Declaration

COMPARATIVE PRODUCT LIFECYCLE ASSESSMENT NIKE, Inc. Product Comparisons

Government Review of Waste Policy in England 2011

Developments and trends shaping the future for Waste-to- Energy technology suppliers

The challenge of mixed plastics recycling. Luca Stramare R&D Manager COREPLA (Italy)

Views on Indicators of Resource Efficiency

Introduction to Waste Treatment Technologies. Contents. Household waste

Legrand's environmental commitments

Fujitsu Group s Environmental Management: Outline of Environmental Protection Program (Stage IV)

Smart Cities. Smart partners in tomorrow s cities

Get Ready For The One Tonne Action Challenge!

SUSTAINABILITY CHARTER. May R&CA Sustainability Charter V1

METHODOLOGY OF LIFE-CYCLE ASSESSMENT OF RC STRUCTURES USING HIGH PERFORMANCE CONCRETE

Integrated Skills in English ISE II

19th Commission meeting, 19 June WORKING DOCUMENT of the Commission for the Environment, Climate Change and Energy

4 R Guide Reduce Reuse Recycle Recover

Tokyo Steel s Views to Global Warming revised on June 25, 2010 with the latest data

Life cycle assessment of example packaging systems for milk

GREEN COMFORT FOR SUSTAINABLE CITIES.

Contact: Environment and Green Technologies Department Phone:

Life Cycle Assessment of Reusable and Single-use Plastic Bags in California

METHODS AND CONCERNS FOR DISPOSAL OF PHOTOVOLTAIC SOLAR PANELS. A Project Report. Presented to. San Jose State University. In Partial Fulfillment

LIFE-CYCLE IMPACTS AND COSTS OF MANGANESE LOSSES AND RECOVERY DURING FERROMANGANESE PRODUCTION

Legrand's environmental commitments

Total Lifetime Energy Investment and Global Warming Impact

5 th -6 th : Electronic Jeopardy

ACR+ position paper on the Circular Economy Package 2.0

Environmentally Sound Management of E- waste: Emerging Issues, Challenges and Opportunities for Material Recovery and Recycling

Greening Supply Chain for a Better Environmental Management

Making Sense of Climate Change - for businesses and consumers: measuring greenhouse gas emissions ( carbon footprint )

Aluminum. Aluminum beverage cans are e sustainable. Aluminum Beverage Can Recycling Rate

110. PROFILE ON PRODUCTION OF GLASS BOTTLES AND TUMBLERS

Data Center Life Cycle Analysis. Christophe Garnier EMEA Technical Work Group Member Schneider Electric

EXECUTIVE SUMMARY ES-1

Transcription:

Recycling: Why glass always has a happy ending

In a nutshell You know there is a direct link between recycling and reducing our carbon footprint. You also probably know that glass recycling has many positive environmental and societal benefits. But you might be surprised to learn how effectively glass recycling reduces. This is the eternal story of glass and. Glass bottles are made in a closed-loop recycling system. Bottles which have been used by consumers are collected and re-melted in a glass furnace to produce new bottles. This action can be repeated over and over again as the glass never loses its quality. savings from recycling glass occur both at the glass plant, and all along the supply chain. Recycling glass containers minimises waste, preserves natural resources, reduces energy use and creates jobs in the recycling industry. savings at the glass plant The glass industry is able to quantify the savings in emissions at the factory when recycled glass (known as cullet) is used in the furnace. On average, a 10% increase of cullet in the furnace decreases its energy use by 3% and emissions by 5%. Less is emitted as less energy is required for melting cullet. Cullet also replaces some ingredients which naturally contain carbon, such as limestone (CaCO3). These materials release carbon dioxide when they are melted in the furnace while cullet does not. savings over the entire lifecycle To obtain a complete picture of the savings when recycling glass, a Life Cycle Assessment (LCA) must be carried out. The LCA quantifies all of the environmental impacts along the supply chain. When glass is recycled, there is no need to produce, process or transport the virgin raw materials, so less fuel is used. Some additional steps must be accounted for, such as the energy needed to run the cullet treatment plant. However, the burden of recycling is small compared to its benefits. Through FEVE, the European container glass industry contracted PE International to undertake a full LCA study to quantify the environmental impact of glass bottle production and recycling. The FEVE LCA study shows that, on a cradle to cradle basis, every tonne of recycled glass saves 670 kg of CO2 (EU average). Expressed in terms of percentages, melting 100% cullet reduces the CO2 emissions by about 58% compared to a situation where no cullet is used. 1

RAW MATERIAL EXTRACTION RAW MATERIAL PROCESSING OTHER USES GLASS FACTORY The benefits of glass recycling on emissions in a closed loop system CULLET TREATMENT PLANT CONSUMER DISPOSAL COLLECTION Recycling glass is beneficial to the environment Eighty percent of European consumers know that glass can be infinitely recycled without any loss of its qualities, and that glass recycling has many positive benefits for the environment 1. Each time one tonne of glass containers is recycled in a furnace: Less is emitted as less energy is needed to melt cullet. Emissions from virgin raw materials breaking down in the furnace are avoided. The amount of packaging waste going to landfill is reduced by one tonne. 1.2 tonnes of virgin raw material does not need to be quarried, processed and transported. There are other benefits for the environment and for society: Glass is collected and recycled locally. Therefore, emissions from transport have a very limited impact on the overall production cycle. Glass recycling is a responsible and measureable action that consumers can take to help the environment. Glass recycling creates employment in collection schemes and cullet treatment centres. 1 European Consumers Survey 2010 InSites Consulting see www.feve.org 2

The FEVE Life Cycle Assessment: Measuring the savings over the entire lifecycle FEVE contracted PE International to carry out a full LCA of the glass packaging industry. The assessment covered 72% of European production, representing more than 200 glass manufacturing plants. PE International is a global organisation which provides both consultancy services and software that help companies and industry bodies to gain a complete picture of the impact of their businesses. The study was carried out in accordance with international standards (ISO 14040/44) and measured the environmental costs of producing one kilogram of formed and finished glass which is ready to use. This enables us to meaningfully estimate the overall environmental impact of a single bottle. All aspects of a product s life, including end-of-life and recycling, are accounted for. This is known as a cradle-to-cradle LCA. The work of PE International was peer-reviewed by four independent academic and industry experts. The FEVE LCA shows that, on a cradle to cradle basis, 1 tonne of recycled glass (cullet) replaces 1.2 tonnes of virgin raw material, saving 0.67 tonnes of CO2 (see graph) for every tonne of finished glass (EU average). In other words, by replacing 100% of the virgin materials with recycled glass, CO2 emissions are cut by about 58%. The LCA study took into account the product s full life cycle: from the extraction of resources, production, recycling, to the disposal of wastes. Indicators help to quantify the contributions to environmental impacts such as climate change, smog or acidification. An LCA does not measure the health impacts of a product, or whether it is fit for purpose. Nor can the LCA methodology capture the impact of the other major environmental benefits of glass such as longer shelf life, impermeability, taste preservation, price stability, natural resource availability, or the sustainability of the post-consumer glass market. The full LCI data (Life Cycle Inventory) is available to interested customers and stakeholders. To access the LCI data, please visit our website www.feve.org or email secretariat@feve.org. More information on the FEVE LCA - as well as on sustainability and glass - can be found on www.feve.org 3

Boundaries of the FEVE life cycle assessment for container glass Cradle to Cradle Recycling into glass containers Recycling into glass wool Cullet from noncontainer glass Landfill / Incineration Recycling into aggregates Recycling into aggregates Landfill / Incineration Transport Collection: Recycling & Reuse End-of-life Use Cradle to Gate Transport Treatment of post-consumer cullet (CTP) Gate to Gate Filling (only generic, incl. washing & Sterilization Transport Transport Batch Preparation Melting (Furnace) Conditioning Forming & Finishing Final product Transport Raw materials: Silica Sand Soda ash Limestone etc. Energy, fuels, other inputs Oxygen production Emissions to air, water & soil (waste) emissions (kg co 2 /kg formed & finished glass) 1.4 1.2 1 0.8 0.6 0.4 0.3 Cradle-to-Cradle effect of recycled glass on emissions 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% % recycled glass 4

Glass Recycling in Europe Saves Resources Today, more than 67% of glass bottles and jars sold to consumers in the European Union are collected for recycling. This translates into more than 11 million tonnes (over 25 billion glass bottles and jars) being collected throughout Europe. Glass recycling in Europe increases each year thanks to the commitment of citizens. The glass industry is able to turn waste glass into a valuable resource to make new bottles and jars, avoiding the use of virgin raw materials and reducing both energy consumption and greenhouse gas emissions. Glass recycling creates secure economic growth and local employment in Europe because the glass is locally collected, locally recycled and locally produced. Glass is a totally self-supporting packaging system that fits very easily into today s ambitions for a circular economy. Glass helps to create a society where recycling is the key factor to reduce waste, and where waste is considered as a valuable resource. Glass recycling is truly an eternal story with priceless benefits for the environment and for society. With the commitment of all stakeholders, we can redouble our efforts to increase the amount of glass that is recycled even further. We ask the general public, municipalities, waste management companies, food and drink manufacturers and retailers to work with glass manufacturers to reach this goal. Container glass Collection for recycling rates in Europe >60% 50-60% 35-50% <35% Not Available Source: www.feve.org - Data Year 2009 5

About FEVE FEVE is the association of European manufacturers of glass containers and machine-made glass tableware. The members of FEVE produce over 20 million tonnes of glass per year. The association has 60 members, the most of which are represented in 20 independent corporate groups. Manufacturing plants are located across 23 European states and include global blue chip and major companies working for the world s biggest consumer brands. The container glass industry accounts for 60% of the total glass production in Europe (including Switzerland and Turkey). There are over 160 plants in the region, employing 46,000 people. The EU is the world s largest producer of container glass. For more information on the glass industry, go to www.feve.org 6

About Glass As a packaging material, glass containers ensure the preservation, safe delivery and attractive presentation of a vast array of consumer products. Whether used for drinks, food, cosmetics, perfumes or pharmaceuticals, glass plays a vital role in supporting European trade and commerce. Glass is 100% recyclable, virtually inert and preserves the original taste of the products it contains. 7

About Friends of Glass Friends of Glass is a European consumer community of more than 21,000 people who support and promote the consumers right to choose food and drink products in glass packaging. A number of enticing tools are available on the multi-language website www.friendsofglass.com. They include Hank the Singing Bottle, the Bottle Bank Test and the Pass the Bottle Facebook game. The objective is to make consumers aware that glass is 100% recyclable infinitely, that it is locally recyclable in a bottle-to-bottle system, and that glass recycling is sustainably sound. Friends of Glass was initiated in 2009 in response to a pan-european survey commissioned by FEVE. The survey, conducted by the research institute InSites, found that 74% of European consumers prefer glass packaging for their food and drinks. 8

Glass recycling saves resources Avenue Louise, 89/4 B - 1050 Brussels Tel: +32 (0)2 536 00 80 Fax: +32 (0)2 539 37 52 secretariat@feve.org http://www.feve.org Follow us on Twitter: http://twitter.com/#!/feveeu