THE SIMBARS BOLLARD COLLECTION CRAFTSMANSHIP - ENHANCEMENT - SECURITY Assessed to ISO 9001 LPCB Certificate N o 932 SIMBARS Bollard Solutions Tel. 0117 9531444 Fax. 0117 9631444 email. info@simbars.co.uk
About Simbars Simbars was established by engineer, Martin Simmons, during the late 1980 s and incorporated in 2003 as Simbars (UK) Ltd; subsequently gaining an enviable reputation for reliability and consistency by manufacturing to the highest standards. This quality has been recognised and Simbars (UK) Ltd is an ISO 9001 certified company. Our quality systems and factory are inspected every six months and audited by the Loss Prevention Certification Board. The Loss Prevention Certification Board (LPCB) is the leading international certification and approval body in security and fire protection. LPCB approvals are recognised by governments and regulatory authorities around the world. Simbars is continually working and testing with the LPCB on innovative new product developments. Simbars (UK) Ltd street furniture manufacturing takes the experience and expertise gained over three decades and combines this with contemporary design to provide civil engineers, architects and street furniture suppliers with an exciting source for high quality and cost effective products. MATERIALS AND FINISHES Simbars (UK) Ltd is UKAS ISO 9001 certified for design and manufacture. This ensures a consistent level of quality and full traceability of materials and processes. STAINLESS STEEL SATIN POLISHED At Simbars we only use certified grades of stainless steel, grade 304L is used as our standard grade. This is then polished to a beautiful fine satin finish. Grade 316 is available on request. STAINLESS STEEL BRIGHT POLISHED Our stainless steel bright polished finish is achieved by being mechanically polished, providing a reflective finish with a high degree of image clarity. RILSAN NYLON COATING BLACK The ultimate long lasting thermoplastic coating for steel. At Simbars we have been coating with this material for over 20 years. Rilsan nylon is extremely hard wearing, scratch and chip resistant and warm to the touch. The products are fully shot blasted before being heated to 350 c and then dipped into our fluidized bed of Rilsan powder. On contact with the hot surface the Rilsan melts and flows out to a smooth homogeneous coating fully encapsulating the product, a process known as Rilsanisation. Rilsan is made from a renewable plant source and provides the perfect solution to corrosion without costing the earth. GALVANIZED STEEL Recognised for being long lasting and corrosion resistant. All our galvanizing is certified to BS EN ISO 1461 and is carried out after final manufacture ensuring a consistently high product quality. GALVANIZED & POWDER COATED Used where a specific colour is required. We sweep blast the products after galvanizing but before coating to produce a key to ensure good adhesion of the powder to the galvanized surface minimising the risk of chipping. A large range of RAL colours are available. BS EN SPECIFICATIONS: Hot dip galvanized finish to BS EN ISO 1461 Stainless Steel type BS EN 10088-2, 1.4301 (304L) Steel Tube to EN10219 S235
Flat Cap Bollard Bollard with flat cap, making this the most cost effective and simplistic bollard available. The clean simple form makes this bollard a true classic. Stainless Steel Grade 316 available, Reflective Bands and Recessed Grooves. ST50-BL ST50-GA ST50-SS ST50-GR + Powder Coated ST50-BP ST50-BP 3 Semi Dome Bollard Our most popular style, the partially rounded cap forms a perfect radius top. Stainless Steel Grade 316 available, Reflective Bands and Recessed Grooves. ST51-BL ST51-GA ST51-SS ST51-GR + Powder Coated ST51-BP
Mitre Cap Bollard A very popular choice, the mitre top is formed at a 45 degree angle. Stainless Steel Grade 316, Reflective Bands and Recessed Grooves. ST52-BL ST52-GA ST52-SS ST52-GR + Powder Coated ST52-BP 4 Ground Sockets Our range of heavy duty ground sockets enable secure mounting of our removable bollards. Importantly, in the closed position they do not present a trip hazard. A simple padlock fitting securely locks the bollard in position. Standard overall 350mm (other heights are available). Manufactured to suit 60mm to 450mm bollards. Extra option: Stainless Steel Grade 316.
Surround Style Ground Socket Manufactured from steel and with a galvanized finish to ensure a maintenance free life. Galvanized Finish to BSEN ISO 1461. To suit 60mm diameter to 450mm diameter bollards. ST47-GA 5 Stainless Steel Surround Style Ground Socket, lid and socket top are satin polished. To suit 60mm diameter to 450mm diameter bollards. Extra option: Stainless Steel Grade 316. ST47-SS Hinged Style Ground Socket, lid and socket top are satin polished. To suit 60mm diameter to 450mm diameter bollards. Extra option: Stainless Steel Grade 316. ST48-SS
Bollards with Anti-Ram Galvanized Steel Cores Combining the good looks of all of our stainless steel bollards, the addition of a high grade steel core gives added strength for situations where anti ram properties are required. Fixing style: Submerged. Stainless Steel Grade 316, Recessed Grooves and Reflective Bands. ST58-SS ST58-BP 6 Bollards with Recessed Groove The machined grooves in our range of bollards give an added dimension. Grooves can be polished to contrast with the shank of the bollard in stainless steel. Additionally they can make an excellent feature or tape can be applied. We can, of course, machine any width or number of grooves required. Minimum order quantity: Submerged, Bolt Down or Removable with a secure locking ground socket box. Stainless Steel Grade 316, Extra Grooves and Reflective Bands. 5 pieces. ST59-BL ST59-GA ST59-SS ST59-GR + Powder Coated ST59-BP
Bollard, Satin Polished, with two Bright Polished Grooves A selection of different styled caps available, complete with two bright polished 50mm wide grooves. Extra option: Stainless Steel Grade 316. ST61-SS Satin Polished, with two bright polished grooves ST61-BP Bright Polished, with two satin polished grooves 7 Bollards with Double Recessed Groove The machined grooves in our range of bollards give an added dimension. Grooves can be polished to contrast with the shank of the bollard in stainless steel. These grooves can make an excellent feature or tape can be applied. We can machine any width or number of grooves required. Minimum order quantity: Submerged, Bolt Down or Removable with a secure locking ground socket box. Stainless Steel Grade 316, Extra Grooves and Reflective Bands. 5 pieces. ST64-BL ST64-GA ST64-SS ST64-GR + Powder Coated ST64-BP
Three Sided Bollard A formed triangular section with a mitre cap gets this bollard noticed! Widths: 75mm to 250mm. Stainless Steel Grade 316 and Reflective Bands. ST66-BL ST66-GA ST66-SS ST66-GR + Powder Coated ST66-BP Bright Polished 8 Four Sided Bollard A square style with cap options of pointed or mitre Widths: 60mm to 200mm. Stainless Steel Grade 316 and Reflective Bands. ST65-BL ST65-GA ST65-SS ST65-GR + Powder Coated ST65-BP Bright Polished
Ellipse Bollard Formed to give a true ellipse, a mitre top adds to the visual appeal of this design. Size available: 200mm x 100mm. Stainless Steel Grade 316, Recessed Grooves and Reflective Bands. Minimum order quantity: 10 pieces. ST69-SS ST69-BP 9 Record Groove Bollard Bollard with record style grooves, where a fine pitch groove is cut in a recess. These can be painted or polished. Diameter : Stainless Steel Grade 316 and Painted Grooves on Stainless Steel. ST70-SS
Radius Dome Bollard with Groove The smooth radius formed cap makes this style particularly pedestrian friendly. 73mm, 89mm, 114mm, 168mm and 219mm. Stainless Steel Grade 316, Recessed Groove and Reflective Bands. ST67-SS ST67-BP Bright Polished 10 Flat Sided Oval Bollard With flat sides and full radiused edges, caps can be flat or mitred. Size available: 200mm x 100mm. Stainless Steel Grade 316 and Reflective Bands. Minimum order quantity: 10 pieces. ST68-SS ST68-BP