I 1 Meters for Sat, TV, FM and optical MSK 130, MSK 130/O, MSK 30, MSK 30/D SAT
2 I Meters I Portable meters Portable meters Portable meter for Sat/TV MSK 30, MSK 30/D NEW MSK 30/D with Dolby Compared with the fully-equipped MSK 130, the MSK 30 is a reasonably-priced meter at entry level, which, with its comprehensive basic equipment, provides the installer with an all-round device for daily use in a working environment. The MSK 30 is designed as a portable combination meter for DVB-S/-S2, DVB-C, DVB-T/-T2 and analogue TV. The unit is equipped with a high-quality 4.3" TFT colour touch screen which enables analogue and digital video display in MPEG-2 and MPEG-4 and in the very highest quality. The intuitive operational concept enables rapid measurements in the SAT and TV range. Features Level measurement of analogue and digital TV signals (DVB-S/-S2, DVB-C, DVB-T/-T2, TV) Video display of analogue and digital TV signals /MER measurement and display Constellation diagram display 4.3" touch TFT colour display (480 x 272 pixels), splash-proof Battery life of at least three hours Spectrum display Sat-finder function Acoustic signal tone for antenna alignment Level display can be selected in dbµv, dbmv or dbm Automatic measurement range selection Direct frequency and channel input Measurement and display of the remote feed current Audio carrier measurement (TV) Audio control with built-in loudspeakers, Dolby Digital audio AC3 available in MSK 30/D DiSEqC TM 1.2 control signal SCR/SCD2 single cable system control commands Data rate measurement of services in the DVB transport stream Memory for meter settings Software updates possible via universal USB port Data Logger function Video input (Cinch) Mains or battery operation Scope of supply: Bag with carrying belt, power adapter, measuring cable with F adapters, USB cable, 12 db adjustable attenuator (remotely feedable)
Meters I Portable meters I 3 Portable meter for Sat/TV/FM (optical) MSK 130, MSK 130/O The MSK 130 is designed as a portable combination meter for DVB-S/-S2, DVB-C, DVB-T/-T2, analogue TV, FM radio and return path. The MSK 130/O features an additional optical measuring input, which can also be retrofitted in the MSK 130. The unit is equipped with a high-quality 9" TFT colour touch screen which enables analogue and digital video display in MPEG-2 and MPEG-4 and in the very highest quality. The integrated CI interface also makes it possible to display coded transmitters. Measurement results can be saved on a USB stick. Features Level measurement of analogue and digital TV signals (DVB-S/-S2, DVB-C, DVB-H/-T/-T2, TV, FM) incl. return path Optical measurement (MSK 130/O) Video display of analogue and digital TV signals /MER measurement and display Constellation diagram display 9" touch TFT colour display (800 x 480 pixels), splash-proof Battery life of at least three hours Spectrum display Sat-finder function (Sat expert) Calibration function for two LNBs (multi-feed reception) Acoustic signal tone for antenna alignment Level display can be selected in dbµv, dbmv or dbm Automatic measurement range selection Direct frequency and channel input Measurement and display of the remote feed current Audio carrier measurement (TV) Audio control with built-in loudspeakers Stereo headphone socket Return path measurement DiSEqC TM 1.2 control signal SCR/SCD2 single cable system control commands IP test: Ping test Memory for meter settings Data rate measurement of services in the DVB transport stream Storage of measured values and software updates possible via universal USB port Data Logger function TV output: HDMI and analogue audio-video in/out Mains or battery operation
4 I Meters I Upgrades for MSK 130 and MSK 130/O Meter upgrades for MSK 130 IPTV and ASI retrofit MZS 130/IP The MZS 130/IP retrofit adds the IPTV and ASI measuring functions to the MSK 130 meter series. In addition, MPEG-2 transport stream analysis of all DVB input signals is also possible. Complete devices are also available ex works: MSK 130/IA for SAT/TV/ FM/IPTV/ASI Order no. 21710053 MSK 130/OIA for SAT/TV/ FM/OPTIC/IPTV/ASI Order no. 21710054 MZS 130/IP order no.: 21710052 Features Retrofitting of IPTV and ASI measurement functions Analysis functions of all DVB input signals (regardless of the physical measurement input): Measurement of transport stream, service and stuffing bit rates and service lists MPEG-2 transport stream analysis: 1st priority, 2nd priority and 3rd priority errors ¹ ) PSI/SI table analysis: PAT, CAT, NIT and SDT ² ) IP measurements: Protocol type (UDP/RTP), packet number and length, FEC type, lost packets, lock failure, video display ¹ ) TS sync loss, sync byte error, PAT error, continuity count error, PMT error, PID error, transport error, CRC error, PCR error, PCR accuracy error, PTS error, CAT error, NIT error, SI repetition error, unreferenced PID, SDT error, EIT error, RST error, TDT error. ² ) PSI (program-specific information), SI (service information), PAT (program association table), CAT (conditional access table) NIT (network information table), SDT (service description table)
Meters I Upgrades for MSK 130 and MSK 130/O I 5 Software option for remote control MZS 130/REMOTE The MZS 130/REMOTE software option makes it possible to control an MSK 130 remotely, so that all measurement functions will be available via a network connection. The meter is accessed remotely via a web browser. All of the meter functions can be accessed and controlled from anywhere using a smartphone, tablet, PC or laptop. MZS 130/REMOTE order no.: 21710051 Features Remote access to MSK 130 measurement functions via network Enables the measurement and monitoring of analogue and digital SAT/TV/radio signals Level, MER, noise margin, (before and after error protection) Spectrum measurement functions Transport stream analysis, service lists, video display Monitoring functions, threshold values: level, noise, Suitable end devices for remote access: PC, laptop, tablet or smartphone Access via web browser Can be integrated into existing networks (e.g. to remotely monitor headends)
6 I Meters I Technical data Type MSK 30 MSK 30/D Order no. 21710048 21710049 RF component Frequency range DVB-C/-T/-T2, TV [MHz] Frequency range DVB-S/-S2 [MHz] 47-880 950-2150 Frequency resolution [khz] Cable/TV/FM: 50, Sat: 100 TV standards B/G, I, D/K, M, N Digital satellite receiver DVB-S/-S2 Modulation process QPSK, 8PSK Code rate (FEC) DVB-S 1/2, 2/3, 3/4, 5/6, 7/8 Code rate (FEC) DVB-S2 1/2, 2/3, 3/4, 5/6, 8/9, 9/10, 2/5, 3/5 Input symbol rate [MS/s] 2-45 (DVB-S), 2-45 (DVB-S2) 1E-6... 2E-2 (pre Viterbi) MER [db] 25 Digital terrestrial TV receiver DVB-T/-T2 DVB-T modulation process QPSK, 16/64 QAM DVB-T2 modulation process QPSK, 16/64/256 QAM FFT mode DVB-T [k] 2, 8 FFT mode DVB-T2 [k] 1, 2, 4, 8, 16, 32 Guard interval DVB-T 1/4, 1/8, 1/16, 1/32 Guard interval DVB-T2 1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256 Code rate (FEC) DVB-T 1/2, 2/3, 3/4, 5/6, 7/8 Code rate (FEC) DVB-T2 1/2, 2/3, 3/4, 5/6, 7/8, 3/5, 4/5 Channel bandwidth [MHz] 6, 7, 8 1E-6... 1E-2 (pre Viterbi) MER [db] 36 Digital CATV receiver DVB-C (J83 A) DVB-C modulation process [QAM] 16/32/64/128/256 Input symbol rate [MS/s] 2-6.999 1E-9... 1E-2 (pre RS) MER [db] 40 TV system Colour standards PAL, SECAM, NTSC Type MSK 30 MSK 30/D Audio FM, NICAM and AM sound FM, NICAM and AM sound, AAC/ HEAAC, Dolby AC3 Digital image decoding MPEG-2; MPEG-4/AVC DVB transport stream Data rate Services can be measured in Mbps Level measurement section Level measurement range [dbµv] 30... 95 Measurement accuracy [db] Typ. ± 1.5 Analogue detector TV: Peak value, Sat/FM: Mean value Digital detector Mean value Display Monitor 4.3" touch TFT colour display (480 x 272 pixels) Sat-finder (acoustic) Level-dependent beep Power supply Lithium/ion rechargeable battery [Ah/Wh/V] 2.6/19/7.4 Mains (plug-in power supply unit) [V] 100-240 V (50/60 Hz) DC external [V] 12 Remote feeding Remote power feed [V] 5/13/18 Remote feed current [ma] Max. 500 Control signals 22 khz, DiSEqC TM 1.2, SCR/SCD2 single cable system Connections RF input (impedance) [Ω] 75 (F coaxial socket) Video input Analogue video (Cinch) USB port 1 x socket, USB 1.1 DC supply 12 V [mm] Hollow plug socket 2.5/5.5 General Safety standards Protection class II (AC/DC power supply unit), VDE EN 61010 Dimensions (W H D) [mm] 185 x 125 x 44 Weight [kg] Approx. 0.7
Meters I Technical data I 7 Type MSK 130 MSK 130/O Order no. 21710045 21710046 RF component Frequency range DVB-C/-T/-T2, DAB, TV, FM [MHz] 4-1010 Frequency range DVB-S/-S2 MHz] 930-2250 Frequency resolution [khz] Cable/TV/FM: 50, Sat: 100 TV standards B/G, I, D/K, M, N Digital satellite receiver DVB-S/-S2 Modulation process QPSK, 8PSK, 16/32APSK Code rate (FEC) DVB-S 1/2, 2/3, 3/4, 5/6, 7/8 Code rate (FEC) DVB-S2 1/2, 2/3, 3/4, 5/6, 8/9, 9/10, 2/5, 3/5 Input symbol rate [MS/s] 1-45 (DVB-S), 2-45 (DVB-S2) 1E-6... 2E-2 (pre Viterbi) MER [db] 25 Digital terrestrial TV receiver DVB-T/-T2/-H DVB-T modulation process QPSK, 16/64 QAM DVB-T2 modulation process QPSK, 16/64/256 QAM FFT mode DVB-T [k] 2, 8 FFT mode DVB-T2 [k] 1, 2, 4, 8, 16, 32 Guard interval DVB-T 1/4, 1/8, 1/16, 1/32 Guard interval DVB-T2 1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256 Code rate (FEC) DVB-T 1/2, 2/3, 3/4, 5/6, 7/8 Code rate (FEC) DVB-T2 1/2, 2/3, 3/4, 5/6, 7/8, 3/5, 4/5 Channel bandwidth [MHz] 6, 7, 8 1E-6... 2E-2 (pre Viterbi) MER [khz] 40 Digital CATV receiver DVB-C (J83 A) DVB-C modulation process 16/32/64/128/256 QAM Input symbol rate [MS/s] 2-6.999 1E-9... 1E-2 (pre RS) MER [db] 40 Optical receiver Inputs - FC, CLIK! (adapter) Wavelengths [nm] - 1310-1550 Input level range [dbm] - -40 to +10 Measurement accuracy [dbm] - ± 0.5 HF frequency range [MHz] - 5-2250 Type MSK 130 MSK 130/O TV system Colour standards Audio PAL, SECAM, NTSC FM, NICAM and AM sound, AAC/ HEAAC, Dolby AC3 Digital image decoding MPEG-2; MPEG-4/AVC DVB transport stream Data rate Services can be measured in Mbps Level measurement section Level measurement range [dbµv] 30... 120 Measurement accuracy [db] Typ. ± 1 Analogue detector TV: Peak value, Sat/FM: Mean value Digital detector Mean value Display Monitor 9" touch TFT colour display (800 x 480 pixels) Sat-finder (acoustic) Level-dependent beep Power supply Lithium/ion rechargeable battery [Ah/Wh/V] Mains (plug-in power supply unit) [V] 4.8/34/7.4 100-240 (50/60 Hz) DC external [V] 12 Remote feeding Remote power feed [V] 5/13/18 Remote feed current [ma] Max. 500 Control signals 22 khz, DiSEqC TM 1.2, SCR/SCD2 single cable system Connections RF input (impedance) [Ω] 75 (F coaxial socket) TV output HDMI, analogue video Headphone socket [mm] Jack, 3.5 USB port 2 x socket, USB 2.0 LAN interface RJ 45, 100 Mbps CI interface CAM module DC supply 12 V [mm] Hollow plug socket 2.5/5.5 General Safety standards Protection class II (AC/DC power supply unit), VDE EN 61010 Dimensions (W H D) [mm] 295 x 172 x 55 Weight [kg] Approx. 2.2
KATHREIN-Werke KG Anton-Kathrein-Straße 1-3 83022 Rosenheim, Germany Phone +49 8031 184-0 Fax +49 8031 184-52360 www.kathrein.com sat@kathrein.de 99812661/1/0516/VMPG/PF Subject to technical changes.