StructureScan HD LSS-2 Product Brief Lucas Steward, Product Manager February 2012 External version
StructureScan HD Greater Definition More Range 2
StructureScan HD LSS-2 Comparison Improved Range More Detail StructureScan LSS-1 Less Range Less Detail 3
StructureScan HD Dedicated DownScan elements show fish holding next to the buoy anchor line. Improved range shows dam flood gates at 300+ feet 4
StructureScan HD Chunk rock next to boat ramp High definition detail of concrete pattern of launch ramp 5
StructureScan HD Bait Fish Laydown w/rocks Bait Fish Bait Fish 6
StructureScan HD + StructureMap StructureMap Saved Mode in 3D with Navionics Platinum- Miami Marina Break Wall StructureMap Saved Mode in 3D with Navionics Platinum- Approaching bottom change StructureMap Saved Mode in 3D with Navionics Platinum- Rounding a point StructureMap Live Mode in 3D with Navionics Platinum- Scanning Shoreline 7
StructureScan HD + StructureMap StructureMap live mode of Seawall using Navionics Platinum 4 Pane Split Gen 2 StructureMap live mode of definition in sandy area 4 Pane Split Gen 2 8
StructureScan HD on Simrad NSS Dock Pylon Seawall Corner Right only view of Pylon above Eroded Concrete Slab 9
StructureScan HD on Simrad NSS Bottom Transition Small Channel 228 Ft. to right in 20 ft.. depth Bottom Changes 10
StructureScan HD In the past boaters and anglers had to choose between further range with less resolution or less range with better resolution- NOT ANYMORE With a single frequency StructureScan HD can ranger further with better resolution than ever before! Example: The original Structure Scan(LSS-1) in 10 ft.. of water could cover 60 ft.. to each sidenow you can cover 120ft! The new SideScan max range is 600 ft.. over the previous 500 ft.. max. Deep water fishermen will see the most improvement in definition. We were able to improve our max depth and range of the LSS-1 and DOUBLED the definition in water over 50ft. 11
StructureScan HD How we improved the range and resolution- To get better resolution- Narrower slice of the water column Front to back slice is 3.2 degrees vs. 6 degrees of LSS-1(@455kHz -10 db.) To narrow the beam angle the transducer length was increased LSS-1 To get more range- LSS-2 HD Use only the lower frequency and modified the hardware inside the module. 12
StructureScan HD What makes our scanning system the best- We are the only solution with TRUE DownScan combined with SideScan Our transducer has dedicated DownScan elements that look directly below the boat The competition makes you choose between a Side Imaging system or a Down Imaging system- you get the best of both with StructureScan HD Two transducer system We don t combine our 83/200 khz into the Structure Scan transducer because most boats mount the 83/200 khz transducer where it can perform best at high speeds. This flexibility allows StructureScan transducer to be mounted at a higher location to protect it from debris. We include everything you need for a typical install. To make the competition s product perform at high speed you need to mount the transducer in harms way or PURCHASE an additional 83/200 khz transducer PLUS a Y cable. (This is an extra $75-$100 expense) 13
StructureScan HD Network advantage The StructureScan HD module is a 3 device Ethernet Hub It comes with everything needed to connect one display. To add another display to the network purchase an Ethernet cable and plug one end into the display and the other into the module and your done! The Hub shares multiple types of data StructureScan HD sonar data 83/200kHz and 50/200kHz sonar data You can view a transducer connected to another display by selecting the sonar source or share a single transducer between 2 displays Synchronizes waypoints Not only does it add new waypoints like many competitors but also allows for editing and deletion of the waypoint database LSS-2 HD 14
Compatible with- StructureScan HD LOWRANCE HDS Gen 1 and Gen2 HDS Gen 2 provide StructureMap capability SIMRAD Works with NSE, NSO, and NSS systems B&G Zeus 15
Transition Thru hull transducer information will be available March 15 th. 16
Transition Dates LSS-2 StructureScan HD Launch Dates Open order book: February 21 st Sales bulletin: February 21 st Product Brief: February 21 st Consumer launch and website go live: March 15 th Commercial ship: April 1 st LSS-1 StructureScan EOL Dates Last day to place orders: February 21 st Last ship date: February 29 th 17
Options & Accessories Transducers Part Number Description Notes 000-10802-001 STRUCTURE SCAN HD SKIMMER XDCR LSS-2 20 Ft.. cable TBD PLASTIC THRU-HULL XDCR LSS HD 30 Ft. Cable TBD BRONZE THRU-HULL XDCR STRUCTURE SCAN HD 30 Ft. Cable TBD DUAL BRONZE XDCR KIT W/ Y CABLE LSS HD 30 Ft. Cable Transducer Accessories Part Number Description Notes TBD TBD FAIRING BLOCK FOR LSS HD BRONZE TRANDUCER LSS-2 HD Y CABLE FOR 2 TRANSDUCERS TBD LSS-1 XDCR TO LSS-2 MODULE ADAPTOR Inline adaptor cable 000-10874-001 LSS-2 Skimmer Mount Bracket Stainless mount 000-00099-006 10ft Transducer Extension Cable 10 ft. extension cable Module Accessories Part Number Description Notes 000-0127-54 LSS-2 HD 6 ft. Power Cable 000-0127-51 6ft Ethernet Cable 000-0127-29 15 Ft. Ethernet Cable 000-0127-28 25 Ft. Ethernet Cable 18
Technical Specifications Power Requirement Voltage Input Transmit Power Current Drain Fuse Type Transducer Cable Target Separation Transducer Frequency Communication Shared Devices Supported Max Range Max Speed Mark Objects Optimum Speed Max Depth Max Speed Mark Objects Optimum Speed 12 Volts 10V-17V WRMS: 500W WPK: 4000W Max:.75A Typical:.60A Inrush: 4.7A pk External: 3A Fast Acting Automotive Blade 20 feet (6m) 1.5" (38.1mm) 455kHz Ethernet StructureScan can share up to 3 Devices, add NEP-1 for further expansion SideScan Imaging Specifications 600ft-300 per side 35 mph (56 kmh) 15 mph (24 kmh) 2-8 mph DownScan Imaging Specifications 300ft 55 mph (88 kmh) 35 mph (56 kmh) 2-8 mph 19
Compatibility & Service An LSS-2 HD transducer will connect to a LSS-1 module and provide a big improvement in resolution and range similar to an all LSS-2 system but not quite as much detail and range. To use LSS-1 transducers there is an adaptor cable to work with the LSS-2 module. This will give similar performance to the LSS-1 performance. 20
Skimmer Transducer Mounting Jack Plate Mount Step Plate Mount Transom Mount 21
Dimension Drawings 22
What s in the box: 000-10800-001 StructureScan HD Module 000-10801-001 LSS-2 HD Transom Transducer 000-10802-001 Transom Transducer Bracket 000-10874-001 The module only sku 000-10800- 001 includes all of the following except transducer and transducer bracket Power cable 000-0127-54 Pag e 23 15 ft.. Ethernet Cable 2009 Navico Holding AS (10 transducer extension cable accessory) (trolling motor bracket accessory)
StructureScan HD Contacts For further information Product Line Director: Greg Konig Greg.Konig@navico.com Product Manager: Lucas Steward Lucas.Steward@navico.com Program/Project Manager: Kent Jopling Kent.Jopling@navico.com Global Marketing Lead: Daren Cole Daren.Cole@navico.com 24