Penchem s Profile Founded: 1 OCTOBER 1999 Address: BUKIT MINYAK INDUSTRIAL PARK, PENANG, MALAYSIA Nature of Business: DESIGN, MANUFACTURE and SUPPLY of ADVANCED POLYMER and COMPOSITE MATERIALS for ELECTRONICS and MEDICALS Penchem General Electronics Materials Customer Applications Product Category Product Code Applications Special Features Chip On Board Epoxy (COB) EN453 EN485 EN525 EN690 Chip-On-Board Dam & Fill Encap and protect components and bonded wires Good mechanical and adhesion strength Low stress Good thermal-mechanical properties Good weather resistance Die Attach / SMT Epoxy / Silver Epoxy / Under Fill CB625 CB643 DA669 AG806 CB626 CB648 AG803 Bonding chip and component on PCB Die attach (Electrically & nonelectrically conductive) Under-fill Good mechanical and adhesion strength Non sagging/smearing No bleeding and tailing High electrical conductivity (silver epoxy) Epoxy Sealant EN690 GL172 GL174 GL440 GL616 Relays & Contactors Fiber optic Lens Low thermal-mechanical stress High thermal and moisture resistance Good chemicals resistance Epoxy Potting / Silicone Potting PT365 PT497 PT638 PT910 Transformer Sensor Low stress Good thermal-mechanical properties Good weather resistance Good flow & self-leveling UV Epoxy UV367 UV379-1 UV405 UV702 Bonding Fiber optic Bonding Lens Tacking Coils Coating High Refractive index (RI=1.4 to 1.5) Good mechanical and adhesion strength Fast curing 1
Penchem Thermal Interface Materials (TIM) Customer Applications Product Category Product Code Applications Special Features Silicone Pad TH933 TH936-1 Very good thermal conductivity up to 7.1W/mK 2 types of Pad: (a)non-sticky and (b)oneside sticky Can die cut to specific size and dimensions Wide range of thickness (0.2mm up to 5mm) Silicone Putty / Grease TH931-2 TH932-2 Heat sink for Power devices High power IC for PC, Notebook, & Server Heat sink for high power LED and controller Heat sink for automobile and heat exchangers Excellent outdoor performance with good stability & reliability Ease of use by dispensing or screen printing Silicone Potting TH934 2-Part RTV potting compound Good adhesion and weather resistance Good flow and self-leveling Thermal Conductive Epoxy TH732-1 1-Part heat curable epoxy Excellent adhesion and good mechanical strength Good thermal conductivity Penchem Optoelectronics Materials Customer Applications Product Category Product Code Applications Special Features Casting Epoxy OP590 OP692 OP589 Automobile lighting Turn signal bulbs Electronic signs Signboards Backlighting Traffic signal lights Through-hole LED (3mm, 5mm, Oval, Flat-top, etc.) Super Flux Snap LED Outstanding performance for outdoor application Pass TMCL -55 C/100 C, -40 C/120 C Meet MSL specifications Low Iv degradation (<10%) Comply to REACH & RoHS requirements Halogen free Encapsulation Silicone OP955 UV923 Commercial lighting Architectural lighting Outdoor lighting High power LED Low thermal-mechanical stress High thermal & radiation resistance Low gas permeability Refractive index 1.41 & 1.55 Comply to REACH & RoHS requirements Encapsulation Epoxy / Silicone OP589 Backlighting for signage, LCD panel (TV, hand phone, tablet, etc.) Architectural Lighting Automotive Accent Lighting Good heat & UV resistance Meet MSL specification Comply to REACH & RoHS requirements SMD LED Potting Epoxy OP281 OP577 S4 (seven Segment Display) for clocks, watches, digital instruments, and many household appliances Low stress pass TMCL Comply to REACH & RoHS requirements 2
Innovations Customers seek us for engineering solutions 1 Penchem low surface energy ring barrier Penchem UV silicone by needle dispense The finished High Brightness LED product Conventional Compression Mold Self dome-forming silicone process replaced conventional Molding Process. Saved customer 1 million USD per mold. Automatic dispenser from syringe needle 2 3 4 Microwave Fibre Optics Microwave (Aeroplanes) Penchem advanced epoxies with no shifting at high-low temperatures for fiber optics and microwave devices. Replaced expensive brands with excellent engineering support. Innovations Customers seek us for engineering solutions 5 Penchem develop a one part silver conductive epoxy with high peel strength, low out-gassing and exceptionally low volume resistivity. This has help the customer to save process cost with replacement of two-part system 3 6 MEMS Microphone Penchem UV and heat curable epoxies that meet HDD cleanliness requirement. Extremely stable with low shrinkage and no micro-movement or migration at high-low temperatures and humidity test. Successfully replace expensive brands. Hard Disk Drive 3
Developing 3D Printer Technology & Materials Labs are opened on weekends for ideas Epoxy Technology Roadmap Markets Silver DA & SMT Epoxies 2001 Custom Formulations 1999 COB & Relay Sealants 2003 LED Epoxies & UV Cure Adhesives 2006 Fibre Optics 2010 Silicone Epoxy Hybrids 2013 Medical Devices 2014 Aerospace & Composites 2015 Electronics Automotive Solar Medical Aerospace 4
Penchem Analytical Capability Exploring Possibilities, Developing Solutions GPC Reaction progress Sub-amb. TMA CTE DMA Modulus & flexibility Silicone synthesis TGA-DTA - Hi. temp. stability Pyrolizer GC-MS Purity & rev. eng. UV Conveyor Oven UV polymers Tensile Tester Material strength Micro-FTIR Correct product Sub-ambient DSC - % cure Thermal Conductivitimeter - TIM Spectrophotometer color & % T High resolution NMR Silicone structure detn & QC Applications Lab Simulate customers process conditions Help customers resolve material & process issues Develop semiconductor packaging technology Build prototypes Color Check Light Box Die-Attach Machine Wire Bond Machine Solder Reflow with Real Time Video Record Integrating Sphere Light Measurement Humidity Chamber 5
Research Collaborations 1. UKM 2014: Graphenes & conductive ceramics to enhance thermal conductivity 2. Kannur University, India 2014: Silicone chemistry & technology 3. USM 2013: Carbon nanotube composites for high power ICs 4. USM 2012: Synthesis of silicones of useful functional groups 5. USM 2011: Synthesis of POSS silicones 6. USM 2010: Nano-silver adhesives, enhanced electrical conductivity 7. USM 2007: Synthesis of silicone resins Meets Global Global Standard Penchem Certifications and Compliances ISO 9001:2008 Quality Management ISO/TS 16949:2009 Automotive Quality ISO 14001:2004 Environmental Large multi-nationals are confident buying from us. ISO 13485 Medical 6
Global Footprint France California New York Germany China Japan Thailand Taiwan Malaysia Why Penchem Products Some key reasons: Wide range of high quality and performance products Custom formulations and solutions Cost effective alternative Synthesis of own key raw materials Industry leading price and performance Small Minimum Order Quantity, MOQ Strong and comprehensive technical support Provide competitors evaluations, incorporate with professional system/equipment manufacturer to provide total solutions, materials failure analysis and process trouble shooting RoHS compliant (test report issue by SGS and accredited test labs) 7
Winning Together Penchem won Most Innovative SME Award 2012 21 June 2012 Most Innovative SME Award 2012 with RM 1 Million Prize 2012 SME Innovation Award, Manufacturing Category Learning, Exposure & Employee s Ownership Penchem won Quality Management Excellence Award 2011 24 October 2012 8
Continuous Learning and Benchmarking Penchem Won 2013 Enterprise 50 Award Penchem was among top 10 winners of 2013 Enterprise 50 Award 15 November 2013 Contact Information Company Address: Penchem Technologies Sdn. Bhd. 1015, Jalan Perindustrian Bukit Minyak 7, Kawasan Perindustrian Bukit Minyak, 14100 Penang, Malaysia. Tel: +604-5015976, 77, 78 Fax: +604-5015979 Website: www.penchem.com Contact persons: KG Wong (kahgin@penchem.com) Pierre Tham (wengthim@penchem.com) 9