GROUND CREW HI-VIZ HEADSETS PELTOR GROUND CREW HEADSET Beam-mounted earphones that provide the least possible resonance and distortion for excellent sound reproduction even in very high noise environments. Individually sprung headband wires of stainless spring steel provide an even and consistent distribution of pressure around the ears. Microphone with excellent suppression of ambient noise for clear and reliable communication. Connection cord, insulated with flexible polyurethane and with a moulded connector. Dynamic differential microphone with excellent ambient noise compensation and a built-in microphone amplifier. High attenuating cups with optimised acoustic design and excellent space for the ears for best possible sound quality and comfort. Soft, wide foam and fluid-filled sealing rings with built-in pressure evening channels provide low pressure, effective sealing and ideal comfort. Hi-Viz Earshells Compatable with HSMP-1 GB coiled extension cable. Weight: 400g Product Code: MT7H79F01 GB PELTOR GROUND MECHANIC TWIN CUP HI-VIZ HEADSET The earphones provide superb sound reproduction even in extremely noisy environments. The headset has an electret microphone amplifier. Individually sprung headband wires of stainless spring steel provide an even and consistent distribution of pressure around the ears. High attenuating cups with optimised acoustic design and excellent space for the ears for best possible sound quality and comfort. Low, two-point fasteners and easy height adjustment with no protruding parts. Fitted microphone with excellent suppression of ambient noise for clear and reliable communication. Soft, wide foam and fluid-filled sealing rings with built-in pressure evening channels provide low pressure, effective sealing and ideal comfort. Microphone arm that allows quick and easy adjustment to set distance, length, height, angle. Supplied with connection cord, insulated with flexible polyurethane and with a moulded connector. Compatable with HSMP-1 GB coiled extension cable. Weight: 420g. Product Code: MT53H540F-01 GB
GROUND CREW HI-VIZ EAR DEFENDERS PELTOR EAR DEFENDERS OPTIME RANGE HI-VIZ Choosing a hearing protector has just become even easier! The Peltor Optime has a simple graduation system that makes it even easier to select a hearing protector for various work situations, and it is now available in signal colour. The Peltor Optime is not only an easy choice, it is also easy to wear thanks to it functional design and high comfort. GROUND CREW EXTENSION LEAD Optime I Hi-Viz Low profile combined with generous internal depth. The collapsible headband ensures that the hearing protector takes up little space even when not in use. Good attenuation, especially at high frequencies. The attenuation properties of the hearing protector afford excellent communication capacity. Product Code: H510F-404GB Proven resilient ground crew to aircraft headset cable. The coiled cable is highly flexible in high and low temperatures. The highest quality components are used in the construction, and careful attention has been applied to the mechanical interface between the cable and the connectors. This ensures reliable operation even under demanding conditions of ground crew working. Optime II Hi-Viz The larger volume of the cups offers not only better comfort during long-term use, but also better attenuation at lower frequencies. The thin, comfortable headband can be worn under headwear and is also small and convenient when not in use. Weight:230g. Product Code: H520F-460GB Optime III Hi-Viz Optime III is a super-muff, and has been developed for use in extremely noisy environments. The protection is based on new technology with a double casing that minimises resonance in the holder casing. An acoustic connection between the inner volume and the volume between the casings provides maximum lowfrequency muffling. Weight: 285g. 3m coiled 12m Stretched NP3X Plug (Replaces NP3C) Hi-Viz orange or green coiled leads allowing push back / walk round communication / visibility Product Code: H540A-461GB Product Code: HSMP-1 GB PELTOR HEADSET HYGIENE KITS Earpads and seals Microphone kit Keep your headset working at its best Ear pads can harden in use with time, and this reduces the seal to the head. Replacing Hygiene kits regularly ensures that your headset retains maximum attenuation performance. The general hygiene of your headset can be improved by regularly changing the earpads, foam pads and microphone windsock. HSL fully support the ground crew headset as a service centre for warranty and out of warranty repairs for Peltor. We have an ISO9001:2000 and EASA JAR145 approved workshop where repairs, servicing and modifications are carried out on site. We have many years of valuable experience and the equipment that is repaired in our workshop, leaves in the original manufacturer s specifications. Other products that are available with this headset are hygiene kit replacements, wind socks, cotton ear-covers and medi wipes. Website: www.groundcrewequipment.co.uk Product Code: HY73 / HY79
ACTIVE EAR DEFENDERS PELTOR PROTAC EAR DEFENDER Wide, softly padded head cushion. Two independently sprung stainless steel headband wires with low, two-point fasteners give unbeatable even distribution of pressure over the entire soft, wide ear cushion. Audio input is a standard feature. Colour: Red, green and black. Weight: 370g. Improves communication and safety Plenty of space for the ear Last setting is stored when switched off Headset option with guide-mounted microphone Three colour options: Military green, Red, Black Automatic shut-off after two hours if no function is used Battery life is about 270 hours. Warning signal when power is low, before shut-off Audio input jack for external radio Easy to convert into a full two-way communication headset Also available in a headset version Active-volume function in stereo that lets you hear ambient sound: conversation, machine sounds and warning signals Product Code: MT15H7A-GN PELTOR SPORTTAC EAR DEFENDER Peltor SportTac is an intelligent active hearing protector. The smooth adjustment of the hearing protector s level dependent function gives the user particularly pleasant sound reproduction and less interference. The unique digital audio circuit eliminates the abrupt sound cutoff that characterises many level dependent hearing protectors on the market. It is this abrupt cut-off that is experienced as being unpleasant and disruptive. The new electronics in the Peltor SportTac respond at lightning speed and protect the user s hearing from loud impulse noises. Developed specifically for hunters and marksmen Smooth active-volume function, which eliminates abrupt sound cut-off Interchangable shells makes it easy to change colour SORDIN SUPREME PRO Sordin Supreme is developed to conform to international MILspecifications and other extreme conditions. The electronic design is based upon Sordin ASIC circuit and controlled by a microprocessor. This makes it possible to combine very low current consumption with high performance. Sordin headsets are designed for comfort - this is so the user wears it all the time that they are in a high noise environment. They are fully tested to guarantee protection against hazardous noise. Product Code: 75302 Connects to hunting radio Equipped with automatic shut-off function Collapsible Product Code: MT16H210F-478-RD HSL fully support the Peltor headset as a service centre for warranty and out of warranty repairs for Peltor. We have an ISO9001:2000 and EASA 145 approved workshop where repairs, servicing and modifications are carried out on site. We have many years of valuable experience and the equipment that is repaired in our workshop, leaves in the original manufacturer s specifications. All electronic functions are incorporated in a slim 3 button keypad Over 600 hours of battery life from 2 x AAA batteries Battery save function and low battery warning system Waterproof battery compartment, batteries are replaced from the outside AUX input for connection of external radios and mobile phones High passive attenuation Flexible and shape-stable headband Two separate, well shielded microphones for optimum stereo effect and location of sound direction The sound from the speakers is limited to 82 db(a) equivalent sound level Close fitting slim design with foldable headband. Both cups are chamfered at the bottom to suit left or right handed shooters
GROUND CREW DAVID CLARK HEADSET DAVID CLARK H3335 HEADSET David Clark ground support headsets are designed to facilitate communication when background noise or distance makes it extremely difficult. During push-back operations, communication is critical to ensure the safety of everyone in the vicinity, and the protection of the aircraft from accidental damage. The David Clark noise attenuating headsets provide the hearing protection required and our noise cancelling microphones ensure clear, crisp transmission regardless of the noise level. Wire boom allows for microphone / boom placement on the right or left side M-1/DC amplified dynamic noise cancelling microphone Momentary PTT(Push-to-Talk) switch on ear dome Soft headpad and ear seals guarantee exceptional comfort 15 foot straight cord with (SC-267) plug to mate with series C31-XX extension cords Corrosion-proof, chrome plated headset / stirrup assembly Certified noise reduction rating of 24db Product Code: H3335 DAVID CLARK ACCESSORIES Project Code: H3312 DAVID CLARK H3312 HEADSET M-1/DC noise cancelling amplified dynamic microphone Noise shielded microphone with momentary PTT switch, hangs freely ready for periodic use Soft headpad and ear seals guarantee exceptional comfort 25 foot straight cord with (PJ-051) plug to mate with series C31-XX extension cords Corrosion-proof, chrome plated headset / stirrup assembly Certified noise reduction rating of 26db Comfort Cover Ear Seals A soft, double-knit, 100% cotton, washable ear seal cover. Designed to absorb moisture in hot, humid weather. Not for use on the H-20 Series. Not recommended for use on ENC Headsets. Product Code: 22658G-01 Undercut Gel Earseals Gel ear seals with patented undercut design are 26% lighter and allow 30% more interior room for your ears for quieter, more comfortable flights. Will enhance comfort on all David Clark H10-series headsets. Product Code: 40863G-02 Cushioned Headpad Super-Soft, Double Foam Head Pad is wider and more tapered with 60% more surface area in contact with your head to dissipate headset weight. Will enhance comfort on all David Clark H10-series headsets. Product Code: 40688G-36 Microphone Socks David Clark Company mic socks improve communications by reducing wind and ambient cockpit noise while transmitting. Check the Model of your microphone for correct size. Project Code: 40062G-01 Project Code: H3530 DAVID CLARK H3530 HEADSET Flex-Boom allows for perfect microphone placement M-1A amplified dynamic microphone provides superior noise cancellation 30-Inch straight cord with locking connect(sc-298) to mate with C35- XX belt Station Corrosion-proof, chrome plated, headband / stirrup assembly Certified noise reduction rating of 24db HSL fully support the David Clark headset as a service centre for warranty and out of warranty repairs for David Clark Inc. We have an ISO9001:2000 and EASA 145 approved workshop where repairs, servicing and modifications are carried out on site. We have many years of valuable experience and the equipment that is repaired in our workshop, leaves in the original manufacturer s specifications. Other products that are available with this headset are hygiene kit replacements, wind socks, cotton earcovers and medi wipes. Website: www.davidclarkheadsets.co.uk
EXTENSION LEADS HSL GROUND CREW EXTENSION LEAD Product Code: HSMP-1 Proven resilient ground crew to aircraft headset cable. The coiled cable is highly flexible in high and low temperatures. The highest quality components are used in the construction, and careful attention has been applied to the mechanical interface between the cable and the connectors. This ensures reliable operation even under demanding conditions of ground crew working. SPECIFICATION 3m coiled 12m Stretched NP3X Plug (Replaces NP3C) Orange or Hi-Viz green coiled leads allowing push back / walk round communication / visibility Product Code: HSMP-1 GB SPLITTER BOX The splitter box is used for ground crew training, and enables two standard ground crew headsets and extension cables to be plugged into one socket on the aircraft to enable trainees to be monitored by the supervisor during pushback. Both headsets have full communications with the aircraft captain. HEADSET TEST SETS Headset Services Limited offer a range of headset testers, custom built to suit requirements. There is a battery and mains version fitted with standard ATC audio sockets capable of accepting a whole range of manufacturers headsets. There is a self talk facility to test different types of microphone circuits as well as a switcheable tone, generated to help trace intermittent faults in the earphone and mic circuit. Can be configured for any plug type. GROUND CREW HEADSET TESTER Battery operated - completely portable (Mains version also available) Will test most ground crew headsets TUG LEADS Product Code: HSMP 1404 There is a range of ground crew tug leads available that enable the ground crew to communicate from within the tug to the Aircraft using standard ground crew headsets and extension cables. The tug must be equipped with suitable sockets on the front / back and inside the cab. Headset Services Limited is also able to undertake tug installation of sockets and wiring, if required. Accepts 3 standard plug types (1/4 jack, UK Nato Plug and USA Nato Plug) Self Talk facility to test the microphone circuit as well as a switchable tone, generated to help trace intermittent faults in the earphone circuit Available exclusively from Headset Services Limited SPECIFICATION 3m Coiled 12M Stretched NP3C Plug H1 VIS Orange coiled lead allowing push back / walk round communication / visibility Product Code: HSMP-7 Product Code: HSMP9802