BONDING EPOXY & URETHANE ADHESIVES ASSEMBLY PRODUCTS EPOXY ADHESIVES Loctite E-00CL Low Odor A clear, flowable, fast setting epoxy with a 5-minute Loctite E-00NS Non-Sag A translucent, controlled flow, low odor epoxy with a 5-minute Loctite E-05CL An ultra clear, high peel, low odor epoxy with a 5-minute BONDING The Loctite brand offers a complete line of one-part and two-part epoxy and urethane adhesives for structural bonding, potting, and encapsulating. The Loctite brand line contains a wide range of application-specific products designed to outperform the competition in all aspects: Better Adhesion Improved Clarity Better Flow Higher Strength Less Odor Greater Durability From fast setting to high temperature properties, Epoxy and Urethane adhesives offer a variety of performance benefits to meet your assembly requirements. EPOXY & URETHANE ADHESIVES Loctite E-HP Fast Setting A high strength epoxy with a -minute Off white, toughened, high peel, high shear. Loctite E-NS Metal Bonder A light tan, non-sag, high peel, high shear epoxy with a -minute For the name and number of your nearest distributor, call: 1-0-LOCTITE (562-8483) or use the Distributor Locator on our web site at www.loctite.com/distributor Loctite E-30CL Glass Bonder An ultra clear, low viscosity, impact resistant epoxy with a 30-minute Loctite E-40FL A grey, impact resistant, toughened epoxy with a 40-minute Loctite E-HP A high strength epoxy with a -minute Off white, high peel, high shear. 16
Loctite E-NC Electrically Non-Corrosive A potting compound with a -minute Black, opaque, low viscosity. Loctite E-FL A grey, impact resistant, toughened epoxy with a -minute worklife Loctite E-1HP Ultra Strength An amber, non-sag, aerospace grade epoxy with a 1-minute Loctite E-214HP A one-component, heat cure epoxy., temperature resistant, non-sag. Loctite 8 A fast setting, low odor epoxy with a 5-minute Cures at room temperature to form a clear bondline. Loctite D9 Ultra A high performance epoxy with a 5-minute Low odor, very fast room temperature cure, heat resistant to 1 F. Loctite 615 Sandable A high strength, low odor epoxy with a -minute Blue, fast cure, gap filling. Loctite 0151 Ultra A general purpose thixotropic paste epoxy with a 50-minute Allows for extended adjustment time. Loctite 9433 Self-Leveling A high strength epoxy with a 30-minute Cream in color, flowable, toughened, high peel. Loctite 9430 An off white, toughened, light paste, high peel, high shear strength epoxy with a 40-minute Loctite 94 Non-Sag A grey, impact resistant, high viscosity, high peel, high shear epoxy with a 30-minute Loctite 9459 High Temperature Resistance A one-component, heat cure epoxy. Low viscosity, self-leveling. Light grey, excellent high temperature performance, excellent chemical. NEW Loctite 9432NA Non-Sag A grey, single component paste, heat cure epoxy. Excellent high temperature performance, excellent chemical, surface insensitive. URETHANE ADHESIVES Loctite U-05FL Urethane Adhesive A two-part, high performance urethane adhesive for metal bonding with a 5-minute Off white, highly flexible, impact resistant, high peel, high shear. Loctite U-09FL Urethane Adhesive Highly A two-part, high performance urethane adhesive for plastic bonding with a -minute, impact resistant, high peel. Loctite U-09LV Urethane Adhesive Low Viscosity A two-part, high performance urethane adhesive for plastic bonding with a 5-minute REQUIRED EQUIPMENT Equipment is sold separately. Please refer to the Dispensing section on pages 6 & 7 for a complete line of dual cartridge dispensers and mix nozzles. ASSEMBLY PRODUCTS BONDING EPOXY & URETHANE ADHESIVES 17
BONDING EPOXY & URETHANE ADHESIVES ASSEMBLY PRODUCTS LOCTITE BRAND HYSOL EPOXY ADHESIVES PROPERTIES CHART PRODUCT FAST SETTING GENERAL PURPOSE HIGH PERFORMANCE E-00CL E-00NS E-05CL 8 D9 ** 615 1C 1C-LV 7 6C 11C 0151 94F E-HP 9433 9430 Item Number 29289 292 29291 29294 29295 29296 29299 29300 29301 29302 29303 83086 830 83082 83083 83089 83094 83095 830 832 831 838 837 83098 83211 83212 83186 83069 83176 83179 83178 83225 83224 29314 29315 29316 29317 29318 83119 83114 83113 4 g foil pack EPK 2.8 oz. kit 5 lb. kit EPK 3.2 oz. kit 12 lb. kit EPK 4 oz. kit 4 lb. kit 17 lb. kit EPK 2.3 oz. kit EPK 4 oz. kit 17 lb. kit EPK 4 oz. kit EPK 3.3 oz. kit 2.6 lb. kit.7 lb. kit 2 lb. kit lb. kit Container Features Fast setting Flowable Low odor Controlled flow Low odor Low odor Fast cure Fast cure Fast cure Gap filling Sandable Gap-filling Gap-filling Minimal surface preparation Bonds and seals Machineable Gap-filling Bonds and seals Machineable Extended work life Rubber toughened Fast setting Self-leveling Color Translucent Blue White Light tan Light blue Black Off white Cream Off white Viscosity at 25 C Resin: 9,300 cp Hardener: 2,700 cp Mixed - high Resin: cp Hardener: 2,0 cp Resin: 1,0 cp Hardener: 2,0 cp Resin: 325,000 cp Hardener: 30,000 cp Resin: 15,000 cp Hardener: 15,000 cp Resin: 700,000 cp Hardener:140,000 cp Resin: 235,000 cp Hardener: 7,000 cp Resin: 8 cp Hardener: 36,0 cp Resin: 0,000 cp Hardener: 150,000 cp Resin: 235,000 cp Hardener: 7,000 cp Resin: 235,000 cp Hardener: 7,000 cp Mixed - light paste Resin: 70,000 cp Hardener:,000 cp Resin: 225,000 cp Hardener: 1,000 cp Resin: 65,000 cp Hardener: 7,000 cp Resin: 17 cp Hardener: 115,000 cp Mixed - light paste Resin: 300,000 cp Hardener: 40 cp Worklife 3-5 3-5 3-5 5 5 25 25 50 30 40 Mix Ratio by Volume (resin:hardener) 2.5:1 2.5:1 2.5:1 2.7:1 4:1 Peel Strength (piw) 1-5 1-5 40-70 45 Overlap Shear Strength* (psi) 2,0 2,500 1,0 2,0 3,0 1,0 1,0 1,0 3,0-5,000 3,0 4,700 Tg ( C) 98 98 98 58 Hardness (Shore D) 55 65 79 Agency Approvals * Tested on aluminum lap shears. ** Formerly Dexter 9. ASTM D3167. = Not available at time of printing. EPK = Epoxi-Patch Kit. 18
LOCTITE BRAND HYSOL EPOXY ADHESIVES PROPERTIES CHART PRODUCT 94 E-40FL Item Number 83129 83128 83131 83130 83133 83134 29304 29305 29306 Container 50 ml cartridge 0 ml cartridge 5 lb. kit lb. kit 50 lb. pail, hardener 50 lb. pail, resin Features High viscosity Color Viscosity at 25 C Resin: 225,000 cp Hardener: 1,000 cp Resin:,000 cp Hardener: 65,500 cp Worklife 40 40 Mix Ratio by Volume (resin:hardener) Peel Strength* (piw) 35 5-40 Overlap Shear Strength* (psi) 3,0 Tg ( C) 30 Hardness (Shore D) Agency Approvals ASSEMBLY PRODUCTS HIGH PERFORMANCE 9462 E-HP 83142 83135 29319 293** 29321 29322 29323 50 ml cartridge 0 ml cartridge Impact Resistant Beige Off-White Resin: 82,500 cp Hardener: 52,500 cp Resin: 67,500 cp Hardener: 7,000 cp 50-70 3,500-5,000 70 77 E-FL 29309 293** 29311 Resin: 71,500 cp Hardener: 19,000 cp 5-40 -5 HIGH TEMP. ADHESION SPECIFIC POTTING ONE-PART 94PB E-1HP 9739 E-NS E-30CL E-NC 9412 9459 E-214HP 83233 83232 29353 29354 29355 29356 29357 83149 83150 29334 29335 29336 29337 29338 29329 29330 29331 29324 29325 29326 838 837 83126 29339 29340 5 lb. kit lb. kit 42 lb. pail, hardener 168 lb. pail, resin 2 lb. kit lb. kit lb. can 30 ml cartridge 300 ml cartridge Bonds printing blanket stock Ultra strength Aerospace grade High chemical Metal bonder Glass bonder Low viscosity Potting Electrically non-corrosive Low viscosity Potting Self-leveling Self-leveling High chemical Temperature resistant Amber Black Light tan Black opaque Pink White Resin: 225,000 cp Hardener: 0,000 cp Mixed - high Resin: 41,500 cp Hardener: 2,0 cp Resin: 1,400,000 cp Hardener: 2,250,000 cp Resin:,000 cp Hardener: 30,000 cp Resin:,500 cp Hardener: 2,0 cp Resin: 6,0 cp Hardener: 1 cp Resin: 15,000 cp Hardener: 40 cp Low 39,000 cp Paste 150,000 cp 0 1 30 Heat cure 3.3:1 3.5:1 1 part 1 part -50 1-5 35 30-70 - 6,000 2,500-6,000 87 70 55 1 BONDING EPOXY & URETHANE ADHESIVES 9432NA 83217 83216 2 lb. can 55 lb. pail Surface insensitive Paste 225,000 cp 1 part 8 3,0 * Tested on aluminum lap shears. ASTM D3167. For additional potting and encapsulating products, refer to page 40. = Not available at time of printing. ** Made-to-order item. 19
BONDING EPOXY & URETHANE ADHESIVES ASSEMBLY PRODUCTS LOCTITE BRAND HYSOL URETHANE ADHESIVES PROPERTIES CHART PRODUCT POLYURETHANES U-05FL U-09FL U-09LV NEW * Varies with substrates. ** Made-to-order item. Item Number 29348 29349 29350 294 29461 29462 29370** 29371** 388 389 3** 391** Container Features Metal bonder Highly flexible Plastic bonder Highly flexible Plastic bonder Highly flexible Low viscosity Color Off white Viscosity @ 25 C Resin: 640 cp Hardener: 35,000 cp Resin:,000 cp Hardener: 1,150 cp Mixed - very low Resin: 9 cp Hardener: 1,030 cp Worklife 5 minutes minutes minutes Mix Ratio by Volume (resin:hardener) 1:2 Peel Strength* (piw) Overlap Shear Strength* (psi) 500-500- Tg ( C) 48 - Hardness (Shore D) 45 45 45 Agency Approvals
SUBSTRATE SELECTOR GUIDE Loctite brand Structural Adhesives Bond to a Variety of Substrates Simply determine which substrates you re bonding and find the adhesive recommendations in the table below. Refer to the previous charts for typical performance properties of the recommended adhesive. These recommendations should be used as a starting point only. It is recommended to evaluate the selected product in your application to determine suitability. Metals Thermo- Thermoset Rubber Glass Ceramic Masonry Wood Leather Paper/ Plastics Plastics Hardboard Metals E-NS U-05FL E-NS U-05FL E-30CL E-HP E-HP E-00NS U-05FL E-05CL E-214HP E-40FL E-HP E-40FL E-NS E-30CL E-1HP E-HP E-40FL E-40FL U-05FL E-HP E-1HP U-09LV U-05FL E-NS E-NS E-40FL U-09LV E-00CL 9430 8 94 0151 9430 9432NA 8 94 D9 ASSEMBLY PRODUCTS Thermo- U-05FL U-05FL U-05FL U-05FL U-05FL U-05FL E-40FL E-05CL U-05FL E-05CL Plastics E-40FL U-09LV U-09LV E-40FL U-09LV U-09LV E-05CL E-40FL U-09LV E-40FL E-HP E-40FL E-40FL U-09LV E-40FL E-40FL E-HP E-HP E-40FL E-HP 615 615 615 94 94 94 615 11C 94 9433 Thermoset E-HP U-05FL E-HP U-05FL E-30CL E-30CL E-HP E-HP E-05CL E-40FL Plastics E-NS U-09LV E-1HP E-HP U-05FL E-HP E-1HP E-40FL U-09LV E-00CL E-1HP E-40FL E-214HP E-40FL E-00CL E-40FL E-00CL E-00NS E-40FL U-05FL 615 615 615 94 0151 9433 9432NA 11C 615 D9 Rubber U-05FL U-05FL U-05FL E-40FL U-05FL U-05FL E-40FL E-40FL U-05FL E-40FL E-40FL U-09LV E-40FL E-FL E-40FL E-40FL E-FL E-05CL U-09LV E-05CL U-09LV E-40FL E-HP U-05FL U-09LV U-09LV E-05CL E-HP E-40FL U-09LV 94 94 9433 94 94 94 94 9433 94 94 Glass E-NS U-05FL E-00CL E-05CL E-30CL E-30CL E-30CL E-30CL E-40FL E-05CL E-30CL U-09LV E-30CL U-05FL E-00CL E-NS E-00NS E-40FL E-05CL E-40FL U-05FL E-40FL U-05FL U-09LV U-09LV U-05FL E-HP E-00CL U-09LV E-30CL 0151 94 D9 615 D9 0151 0151 D9 615 94 Ceramic E-NS U-05FL E-40FL U-05FL E-30CL E-HP E-00NS E-HP E-40FL E-40FL E-30CL U-09LV E-HP U-09LV E-00CL E-30CL E-HP E-40FL E-05CL E-05CL E-HP E-40FL E-30CL E-40FL U-05FL E-1HP E-NS E-00NS U-09LV E-00CL 9430 94 9433 94 D9 9433 8 8 94 D9 Masonry E-NS E-40FL E-HP E-40FL E-30CL E-00NS E-HP E-HP E-05CL E-05CL E-HP E-HP E-1HP E-FL E-00NS E-HP E-00NS E-00NS E-40FL E-00CL E-1HP E-05CL E-00CL E-05CL E-HP E-NS E-1HP E-40FL U-05FL E-HP 9433 9433 D9 615 0151 9433 8 9433 94 D9 Wood E-HP E-40FL E-HP E-40FL E-30CL E-HP E-HP E-00CL E-05CL E-00CL E-40FL E-05CL E-40FL E-05CL E-40FL E-40FL E-00NS E-HP E-40FL E-HP E-00NS E-HP E-00NS E-HP E-00CL E-00NS E-40FL E-40FL E-FL E-40FL 9433 11C 11C 9433 0151 8 8 11C 615 D9 Leather E-40FL U-05FL E-05CL U-05FL E-40FL E-40FL E-05CL E-05CL U-05FL E-05CL U-05FL U-09LV U-09LV U-09LV E-05CL E-05CL E-40FL E-40FL U-09LV E-40FL U-09LV E-40FL E-40FL E-40FL U-09LV U-09LV U-05FL E-FL E-40FL U-05FL 94 94 94 94 94 94 615 94 94 94 Paper/ E-40FL E-40FL E-40FL E-40FL E-05CL E-40FL E-05CL E-00CL E-05CL E-05CL Hardboard E-05CL E-05CL E-05CL E-05CL E-40FL E-05CL E-00CL E-HP E-40FL E-40FL E-00CL E-HP U-05FL U-09LV E-30CL E-00CL E-HP E-40FL U-05FL E-00CL D9 9433 94 94 0151 D9 D9 94 615 D9 Thermoplastics: ABS, PC, Acrylic, Nylon, SAN, PVC Thermoset Plastics: Epoxy, Phenolic, Polyester, DAP Rubber: Butyl, Neoprene, Nitrile, SBR, Natural, EPDM BONDING EPOXY & URETHANE ADHESIVES 21