Overview 1. Quick Release 2. Stand Base 1. HP Desktop Mini PC Attached (sold separately) 1. Quick Release (mounted) 2. Stand Base (display attached) Model Part Numbers: J7V21AA J7V21AT Introduction Maximize small work spaces with an affordable, which enables you to create a compact desktop solution by combining an HP ProDisplay Monitor 1 with your choice of platform. 1 Key features and benefits Simply attach your HP ProDisplay head to the stand and attach your HP Desktop Mini, Chromebox, select HP Thin Clients or Ultra-slim Desktop PC to the back of the monitor using the integrated HP Quick Release mounting plate. c04399801 Worldwide Version 2 September 5, 2014 Page 1
Overview Store your PC power brick out of the way on the built-in tray. Find your best viewing position with adjustable tilt settings. Get the reassurance of a one-year parts replacement limited warranty. Additional support is available (North America only) seven days a week, 24 hours a day by phone as well as through online support forums. Mounting HP Desktop Mini, HP Chromebox, Ultra-slim Desktop PC or select HP Thin Client Mounting: Use the screws (provided See table in User Guide) to attach the HP Quick Release to the PC platform. Monitor: Attach monitor to the using the existing screws on the back of the monitor. Power brick for Desktop Mini, HP Chromebox, or select HP Thin Clients: Place the Power brick in the tray on the back of the stand. Secure with provided bracket. Cables: Route the cable through the guides. Compatibility The is designed to exclusively accommodate HP Desktop Mini PCs, select HP Thin Clients, the HP Chromebox and the Ultra-slim Desktop PC with the HP LCD monitors shown below (each sold separately). HP Business Monitors ProDisplay HP ProDisplay P191, P201, P201m, or P221Monitor (sold separately) c04399801 Worldwide Version 2 September 5, 2014 Page 2
Technical Specifications Mechanical Tilt range -5 to +25 degrees Supported weight capacity Swivel range Height adjustable Pivot rotation Dimensions (H x W x D) Weight VESA mounting holes N/A N/A N/A Unpackaged: 23.6 x 19.2 x 11.9 cm (9.29 x 7.55 x 4.68 in) Packaged: 34.5 x 23.4 x 14.3 cm (13.58 x 9.21 x 5.62 in) Stand Only: 0.85 kg (1.87 lb) Packaged: 1.77 kg (3.9 lb) 100 mm has been designed to support 18.5 to 21.5 1 -inch diagonal HP LCD monitors from 2.76 kg to 3.3 kg (6.08 lbs to 7.48 lb). has been designed to support a compatible HP PC/Chromebox weighing as little as 0.458 kg (1.01 lb) to the HP USDT weighing up to 3.183 kg (7.019 lb). Other What s included?, Base, Power adapter bracket HP Quick Release 1 x QR locking mechanism 1 x QR "horseshoe" mounting bracket 8 x 10mm VESA screws 4 x 12mm VESA screws 4 x 15.5mm black flat Documentation Kit Quick Start Guide languages Warranty languages Compliance English, German, Spanish, French, Italian, Dutch, Brazilian Portuguese, Thai, Korean, Japanese, S. Chinese and T. Chinese English, German, Spanish, French, Italian, Dutch, Brazilian Portuguese, Thai, Korean, Japanese, S. Chinese and T. Chinese RoHS compliant Limited Warranty The carries a one-year limited warranty. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums. Certain restrictions and exclusions apply. 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. 1. Stand is compatible with an HP ProDisplay P191, P201, P201m, or P221Monitor (sold separately) and HP Desktop Mini PCs, HP USDTs, select HP Thin Clients, and the HP Chromebox. c04399801 Worldwide Version 2 September 5, 2014 Page 3
Technical Specifications HP Monitor Quick Release HP Monitor Quick Release 1. Release/locking 1. Four 100 mm VESA mount screw holes 2. Four 100 mm VESA mount screw holes 3. Mounting holes for attachment to back of select Performance series monitor stands 1. Locking pin screw 2. Locking pin hole on release/locking arm Additional components Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts) Eight 15.5 mm mounting screws (for attachment to HP thin client products) Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands) One Quick Release "locking" screw Color Notes: Supported weight capacity Black 1. No HP monitors allow positioning of a thin client product between a monitor screen and its stand. 2. The Quick Release device is not to be used between a monitor screen and its stand unless provided that way from the factory. 3. Under no circumstances is the Quick Release device intended to be used in an orientation where the Release/Lock lever is oriented downward. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as an HP thin client product cannot exceed 24 pounds. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to determine the appropriate type and quantity of c04399801 Worldwide Version 2 September 5, 2014 Page 4
Technical Specifications HP Monitor Quick Release mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads. 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. c04399801 Worldwide Version 2 September 5, 2014 Page 5
HP Chromebox Summary of changes Date of change: September 5, 2014 Version History: From v1 to v2 Upgrade Description of change: Change the name and the version for launching Copyright 2014 Hewlett-Packard Development Company, L.P. All rights reserved. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Bluetooth is a registered trademark used by Hewlett-Packard Company under license. Google and the Google logo are registered trademarks of Google Inc., used with permission. All other product names mentioned herein may be trademarks of their respective companies. March 2014 c04399801 Worldwide Version 2 September 5, 2014 Page 6