The evolution of a legend
2016 ALL NEW SPEED TRIPLE RANGE SPEED TRIPLE S 10,200.00 SPEED TRIPLE R 11,500.00 Standard Equipment Additional to Speed Triple S New triple engine with 104 new components Brembo Monobloc radial calipers DRL headlights Improved peak power and torque spread across entire rev range Ride By Wire Slip Assist Clutch Switchable ABS Switchable traction control 5 Rider modes Lighter weight carbon fibre body panels Higher specification Öhlins suspension Billet machined handlebar clamps, risers, swingarm pivot covers and rear wheel cover Red R detailing on seat stitching, rear subframe and wheel pinstripes
SPEED TRIPLE S LUGGAGE Tailpack 10 15L (A9510249) RRP 105.00 Moulded Sports Tail Pack offering 10 litres luggage capacity which can be expanded to 15 litres. Features include, showerproof properties, external and internal pockets for storing smaller items and waterproof zip tracks. Ergonomic carry handles and zips for ease of use. Requires Tailpack Mounting Harness (9510164) for fitment. Tailpack Harness Kit (A9510164) RRP 10.00 Tailpack Mounting Harness used for fitment of the the 10 15 Litre Tail Pack (9510249) Tank Bag 15 20L (A9510248) RRP 155.00 Bespoke Moulded Sports Tank Bag offering 15 litre luggage capacity which can be expanded to 20 litres. Features include showerproof properties, external and internal pockets for storing smaller items, and waterproof zip tracks. Non slip base material and felt backed webbing provide fuel tank protection. Ergonomic carry handles and zips for ease of use. Supplied with rain cover, map pocket and shoulder strap. Requires Tank Bag Harness (9510248) for fitment. Tank Bag Harness (A9510165) RRP 35.00 Tank Bag Harness used for fitment of the 15 20 Litre Tank Bag (9510248)
COMFORT Low Rider Seat (A2302994) With a 20mm reduction in seat height, the low seat makes it easier to get your feet to the ground, helping you feel confident and in control. Features premium fabrics. Dual Temperature Heated Grips (A9638095) RRP 185.00 Bespoke heated grips featuring dual temperature controls with illuminated switching internally wired through handlebars for a neat installation. Supplied complete with all mounting hardware and wiring. Low Rider Seat Red Stitch (A2307128) With a 20mm reduction in seat height, the low seat makes it easier to get your feet to the ground, helping you feel confident and in control. Features premium fabrics and red stitch detailing. Comfort Rider Seat Red Stitch (A2307129) Gel Seat option designed to offer the ultimate in seat comfort for both rider and passenger. Featuring integral gel pads front and rear, with premium fabrics and contrast stitch detailing. Grab Rail Kit (A9758293) RRP 105.00 Bespoke cast passenger grab rail for the ultimate in pillion comfort. Featuring Triumph logo detailing and revised tail light surround for ease of installation and neat installation. Handlebar Clamp Kit (A9630449) RRP 75.00 Forged and Machined Aluminium Handlebar Clamp replacement featuring machined logo detailing, offered in a black anodised finish. Comfort Rider Seat (A2302995) Designed to offer the ultimate in seat comfort for both rider and passenger. Featuring integral 3D Mesh inserts with premium fabrics and contrast stitch detailing.
ELECTRICAL Phone Holder Kit 160x100mm (A9510290) A convenient quick release mobile phone holder that features a multi adjustable bracket so it can be mounted to the handlebar. The Phone Holder Kit comes complete with an anti glare visor, touch screen compatible window and cable port. It has a splash resistant design and includes an additional rain cover. Designed to accommodate devices up to 160 by 100 mm. Auxiliary Power Socket (A9938261) An Auxiliary Power Socket that enables the following to be used: Triumph Battery Optimiser Triumph Heated Clothing Phone Holder Kit 70x130mm (A9510291) A convenient quick release mobile phone holder that features a multi adjustable bracket so it can be mounted to the handlebar. The Phone Holder Kit comes complete with an anti glare visor, touch screen compatible window and cable port. It has a splash resistant design and includes an additional rain cover. Designed to accommodate devices up to 70 by 130 mm. TPMS Tyre Pressure Monitoring System (A9640169) RRP 200.00 A Tyre Pressure Monitoring System to measure front and rear tyre pressures which are displayed on the instrument panel. Generates automatic warning alerts if tyres your fall below optimum levels. Phone Holder Kit 140x90mm (A9510289) A convenient quick release mobile phone holder that features a multi adjustable bracket so it can be mounted to the handlebar. The Phone Holder Kit comes complete with an anti glare visor, touch screen compatible window and cable port. It has a splash resistant design and includes an additional rain cover. Designed to accommodate devices up to 140 by 90 mm. Triumph Battery Optimiser (A9930410) RRP 55.00 Automatic Battery Optimiser for lead acid batteries. UK Model PERFORMANCE Arrow Slip On Silencers (A9600773) RRP 976.13 Stainless steel half system featuring a pair of lightweight titanium wrap bespoke silencers. Features include carbon fibre end caps, integral mounting brackets for a clean look and fixed db killers. Offers a reduction in weight plus E Approval for noise. This is the ultimate Speed Triple exhaust option, compete with factory engine tune to ensure optimum performance. Arrow "Low Boy" Race Exhaust (A9600700) RRP 1,120.00 The 3 into 1 'low boy' system radically changes the styling, performance and handling of the Speed Triple. Manufactured from stainless steel and super lightweight titanium, the low level 3 into 1 system provides a 70% (approx. 6.5kg) weight saving. The weight that remains sits lower, lowering the centre of gravity and so benefiting handling. A dedicated engine tune guarantees optimum performance. Approved for off road / closed circuit use only. Arrow Slip On Silencers (ROW off road) (A9600635) RRP 970.00 Stainless steel half system featuring a pair of lightweight titanium wrap bespoke silencers. Features include carbon fibre end caps, integral mounting brackets for a clean look and removable db killers. Offers a reduction in weight over OE exhaust system. This is the ultimate Speed Triple exhaust option, complete with factory engine tune to ensure optimum performance. Quickshifter (A9930428) RRP 300.00 Race inspired gear change Quickshifter to allow full and partial throttle up shifts without the use of the clutch. Full plug and play installation means no modifications to the motorcycle harness are required
PROTECTION Alarm Kit Thatcham Approved (A9808121) RRP 300.00 Thatcham approved (Category 1) bespoke alarm immobilizer system developed in conjunction with Datatool. Designed to be installed whilst ensuring the integrity of the motorcycle wiring harness. Features vibration resistant construction. Frame Protector Kit (A9788016) RRP 135.00 Bespoke frame protectors to offer additional protection in the event of a fall. Manufactured from durable nylon, these frame protectors require no cutting of bodywork to install and are styled to compliment the aggressive features of the bike. Aluminium Radiator Guard (A9708364) RRP 75.00 Durable aluminium radiator guard to offer protection from debris, whilst not compromising engine cooling. Features Triumph logo branding. Anodised black. Mudguard extension Kit (A9708416) RRP 255.00 Front Mudguard Extension Kit to maximise rider protection from spray and debris. CNC Machined Fork Protectors (A9640080) RRP 40.00 CNC Machined fork protectors featuring anodised aluminium spacers with laser etched detailing and acetyl sliders. Designed to protect fork legs in the event of a fall Radiator Finisher Kit (A9708404) RRP 40.00 Replacement aluminium radiator end caps supplied in an anodised black finish. Rubber Tank Pad (A2402023) Self adhesive rubber Tank Pad used for protection against zip damage. Features Triumph branding. Disc Lock (A9810021) RRP 80.00 A high quality, forged Disc Lock complete with carry pouch. Manufactured in the EU. SRA Approved/Sold Secure. STYLING Bar End Finisher Kit Red (A9630432) RRP 12.50 Decorative turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold singularly. Carbon Fuel Tank Infill (A9708417) RRP 410.00 High gloss geniune carbon fibre Fuel Tank Infill panel to replace the standard part. Clutch Cable Guide Red (A9610062) CNC machined clutch bracket in red. Features laser etched Triumph detailing.
Bar End Mirror Black Anodised (A9630205) RRP 85.00 A Bar End Mirror kit featuring tinted mirror glass and laser etched Triumph branding. This accessory is sold individually and can be fitted on either side of the handlebars. Black anodised finish, but also available in clear anodised. CNC Machined Rear Wheel Finisher Black (A9640085) RRP 75.00 CNC machined rear wheel finishers offered in anodised black. Features laser etched Triumph detailing. CNC Machined Rear Wheel Finisher Grey (A9640086) RRP 75.00 CNC machined rear wheel finishers offered in anodised grey. Features laser etched Triumph detailing. Bar End Mirror Clear Anodised (A9630206) RRP 85.00 A Bar End Mirror kit featuring tinted mirror glass and laser etched Triumph branding. This accessory is sold individually and can be fitted on either side of the handlebars. Clear anodised finish, but also available in black anodised. CNC Machined Rear Wheel Spacer (T2012574) RRP 20.00 Replacement rear wheel spacer offered in Anodised red finish to compliment both Speed Triple and Speed Triple R models Bar End Finishers Black (A9630437) A pair of turned aluminium Bar End Finishers finished in black. Also available in alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with an Accessory Bar End Mirror. Colour Co ordinated Bellypan Kit (A9708119) RRP 200.00 Made to the exacting tolerances this unique accessory is styled to match the aggressive styling of the Speed Triple. Manufactured from high impact ABS plastic and available in the motorcycle's factory colours. Bar End Finishers Red (A9630439) Turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold as a pair. Required to be fitted with an Accessory Bar End Mirror. Bar End Finisher Kit Black (A9630367) RRP 12.50 Decorative turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold singularly. Brake Reservoir Rear (A9620036) RRP 60.00 CNC machined rear brake reservoir, offered in anodised black finish. Features sight glass and knurled lid, laser etched with Triumph logo. (Direct replacement for the standard part.) Clutch Cable Guide Grey (A9610061) CNC machined clutch bracket in grey. Features laser etched Triumph detailing.
Flyscreen Visor Kit (A9708266) Injection moulded Flyscreen visor provides additional protection. Requires Triumph Flyscreen for fitment. Bar End Finisher Kit Grey (A9630434) Decorative turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold singularly. Bar End Finishers Clear Anodised (A9630438) A pair of turned aluminium Bar End Finishers with a clear anodised finish. Also available in alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with an Accessory Bar End Mirror. Bar End Finisher Kit Clear (A9630431) RRP 12.50 Superb stylish alternative to the standard equipment mirror. Forged and machined stem with head. Clear anodised finish. Features tinted mirror glass and laser etched Triumph logo. Sold singularly. CNC Machined Front Brake Reservoir (T2025067) RRP 70.00 CNC machined front brake reservoir, offered in anodised black finish. Features sight glass and a knurled lid. Laser etched Triumph logo (Direct replacement for the standard part) Bar End Finishers Grey (A9630440) A pair of turned aluminium Bar End Finishers finished in grey. Also available in alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with an Accessory Bar End Mirror.
SPEED TRIPLE R LUGGAGE Tailpack 10 15L (A9510249) RRP 105.00 Moulded Sports Tail Pack offering 10 litres luggage capacity which can be expanded to 15 litres. Features include, showerproof properties, external and internal pockets for storing smaller items and waterproof zip tracks. Ergonomic carry handles and zips for ease of use. Requires Tailpack Mounting Harness (9510164) for fitment. Tailpack Harness Kit (A9510164) RRP 10.00 Tailpack Mounting Harness used for fitment of the the 10 15 Litre Tail Pack (9510249) Tank Bag 15 20L (A9510248) RRP 155.00 Bespoke Moulded Sports Tank Bag offering 15 litre luggage capacity which can be expanded to 20 litres. Features include showerproof properties, external and internal pockets for storing smaller items, and waterproof zip tracks. Non slip base material and felt backed webbing provide fuel tank protection. Ergonomic carry handles and zips for ease of use. Supplied with rain cover, map pocket and shoulder strap. Requires Tank Bag Harness (9510248) for fitment. Tank Bag Harness (A9510165) RRP 35.00 Tank Bag Harness used for fitment of the 15 20 Litre Tank Bag (9510248)
COMFORT Low Rider Seat (A2302994) With a 20mm reduction in seat height, the low seat makes it easier to get your feet to the ground, helping you feel confident and in control. Features premium fabrics. Dual Temperature Heated Grips (A9638095) RRP 185.00 Bespoke heated grips featuring dual temperature controls with illuminated switching internally wired through handlebars for a neat installation. Supplied complete with all mounting hardware and wiring. Low Rider Seat Red Stitch (A2307128) With a 20mm reduction in seat height, the low seat makes it easier to get your feet to the ground, helping you feel confident and in control. Features premium fabrics and red stitch detailing. Comfort Rider Seat Red Stitch (A2307129) Gel Seat option designed to offer the ultimate in seat comfort for both rider and passenger. Featuring integral gel pads front and rear, with premium fabrics and contrast stitch detailing. Grab Rail Kit (A9758293) RRP 105.00 Bespoke cast passenger grab rail for the ultimate in pillion comfort. Featuring Triumph logo detailing and revised tail light surround for ease of installation and neat installation. Comfort Rider Seat (A2302995) Designed to offer the ultimate in seat comfort for both rider and passenger. Featuring integral 3D Mesh inserts with premium fabrics and contrast stitch detailing.
ELECTRICAL Phone Holder Kit 160x100mm (A9510290) A convenient quick release mobile phone holder that features a multi adjustable bracket so it can be mounted to the handlebar. The Phone Holder Kit comes complete with an anti glare visor, touch screen compatible window and cable port. It has a splash resistant design and includes an additional rain cover. Designed to accommodate devices up to 160 by 100 mm. Auxiliary Power Socket (A9938261) An Auxiliary Power Socket that enables the following to be used: Triumph Battery Optimiser Triumph Heated Clothing Phone Holder Kit 70x130mm (A9510291) A convenient quick release mobile phone holder that features a multi adjustable bracket so it can be mounted to the handlebar. The Phone Holder Kit comes complete with an anti glare visor, touch screen compatible window and cable port. It has a splash resistant design and includes an additional rain cover. Designed to accommodate devices up to 70 by 130 mm. TPMS Tyre Pressure Monitoring System (A9640169) RRP 200.00 A Tyre Pressure Monitoring System to measure front and rear tyre pressures which are displayed on the instrument panel. Generates automatic warning alerts if tyres your fall below optimum levels. Phone Holder Kit 140x90mm (A9510289) A convenient quick release mobile phone holder that features a multi adjustable bracket so it can be mounted to the handlebar. The Phone Holder Kit comes complete with an anti glare visor, touch screen compatible window and cable port. It has a splash resistant design and includes an additional rain cover. Designed to accommodate devices up to 140 by 90 mm. Triumph Battery Optimiser (A9930410) RRP 55.00 Automatic Battery Optimiser for lead acid batteries. UK Model PERFORMANCE Arrow Slip On Silencers (A9600773) RRP 976.13 Stainless steel half system featuring a pair of lightweight titanium wrap bespoke silencers. Features include carbon fibre end caps, integral mounting brackets for a clean look and fixed db killers. Offers a reduction in weight plus E Approval for noise. This is the ultimate Speed Triple exhaust option, compete with factory engine tune to ensure optimum performance. Arrow "Low Boy" Race Exhaust (A9600700) RRP 1,120.00 The 3 into 1 'low boy' system radically changes the styling, performance and handling of the Speed Triple. Manufactured from stainless steel and super lightweight titanium, the low level 3 into 1 system provides a 70% (approx. 6.5kg) weight saving. The weight that remains sits lower, lowering the centre of gravity and so benefiting handling. A dedicated engine tune guarantees optimum performance. Approved for off road / closed circuit use only. Arrow Slip On Silencers (ROW off road) (A9600635) RRP 970.00 Stainless steel half system featuring a pair of lightweight titanium wrap bespoke silencers. Features include carbon fibre end caps, integral mounting brackets for a clean look and removable db killers. Offers a reduction in weight over OE exhaust system. This is the ultimate Speed Triple exhaust option, complete with factory engine tune to ensure optimum performance. Quickshifter (A9930428) RRP 300.00 Race inspired gear change Quickshifter to allow full and partial throttle up shifts without the use of the clutch. Full plug and play installation means no modifications to the motorcycle harness are required
PROTECTION Alarm Kit Thatcham Approved (A9808121) RRP 300.00 Thatcham approved (Category 1) bespoke alarm immobilizer system developed in conjunction with Datatool. Designed to be installed whilst ensuring the integrity of the motorcycle wiring harness. Features vibration resistant construction. Frame Protector Kit (A9788016) RRP 135.00 Bespoke frame protectors to offer additional protection in the event of a fall. Manufactured from durable nylon, these frame protectors require no cutting of bodywork to install and are styled to compliment the aggressive features of the bike. Aluminium Radiator Guard (A9708364) RRP 75.00 Durable aluminium radiator guard to offer protection from debris, whilst not compromising engine cooling. Features Triumph logo branding. Anodised black. CNC Machined Fork Protectors (A9640080) RRP 40.00 CNC Machined fork protectors featuring anodised aluminium spacers with laser etched detailing and acetyl sliders. Designed to protect fork legs in the event of a fall Radiator Finisher Kit (A9708404) RRP 40.00 Replacement aluminium radiator end caps supplied in an anodised black finish. Rubber Tank Pad (A2402023) Self adhesive rubber Tank Pad used for protection against zip damage. Features Triumph branding. Disc Lock (A9810021) RRP 80.00 A high quality, forged Disc Lock complete with carry pouch. Manufactured in the EU. SRA Approved/Sold Secure. STYLING Colour Co ordinated Seat Cowl Kit (A9708133) RRP 135.00 Aggressively styled colour coordinated seat conversion, replaces passenger seat for an integrated look. Cannot be installed with Grab Rail or Tail Pack. Bar End Finisher Kit Red (A9630432) RRP 12.50 Decorative turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold singularly. Clutch Cable Guide Red (A9610062) CNC machined clutch bracket in red. Features laser etched Triumph detailing. Bar End Mirror Black Anodised (A9630205) RRP 85.00 A Bar End Mirror kit featuring tinted mirror glass and laser etched Triumph branding. This accessory is sold individually and can be fitted on either side of the handlebars. Black anodised finish, but also available in clear anodised.
CNC Machined Rear Wheel Finisher Black (A9640085) RRP 75.00 CNC machined rear wheel finishers offered in anodised black. Features laser etched Triumph detailing. CNC Machined Rear Wheel Finisher Grey (A9640086) RRP 75.00 CNC machined rear wheel finishers offered in anodised grey. Features laser etched Triumph detailing. Bar End Mirror Clear Anodised (A9630206) RRP 85.00 A Bar End Mirror kit featuring tinted mirror glass and laser etched Triumph branding. This accessory is sold individually and can be fitted on either side of the handlebars. Clear anodised finish, but also available in black anodised. Bar End Finishers Black (A9630437) A pair of turned aluminium Bar End Finishers finished in black. Also available in alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with an Accessory Bar End Mirror. Bar End Finishers Red (A9630439) Turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold as a pair. Required to be fitted with an Accessory Bar End Mirror. Bar End Finisher Kit Black (A9630367) RRP 12.50 Decorative turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold singularly. Brake Reservoir Rear (A9620036) RRP 60.00 CNC machined rear brake reservoir, offered in anodised black finish. Features sight glass and knurled lid, laser etched with Triumph logo. (Direct replacement for the standard part.) Clutch Cable Guide Grey (A9610061) CNC machined clutch bracket in grey. Features laser etched Triumph detailing. Flyscreen Visor Kit (A9708266) Injection moulded Flyscreen visor provides additional protection. Requires Triumph Flyscreen for fitment. Bar End Finisher Kit Grey (A9630434) Decorative turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar End Mirror Options. Sold singularly. Bar End Finishers Clear Anodised (A9630438) A pair of turned aluminium Bar End Finishers with a clear anodised finish. Also available in alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with an Accessory Bar End Mirror.
Bar End Finisher Kit Clear (A9630431) RRP 12.50 Superb stylish alternative to the standard equipment mirror. Forged and machined stem with head. Clear anodised finish. Features tinted mirror glass and laser etched Triumph logo. Sold singularly. CNC Machined Front Brake Reservoir (T2025067) RRP 70.00 CNC machined front brake reservoir, offered in anodised black finish. Features sight glass and a knurled lid. Laser etched Triumph logo (Direct replacement for the standard part) Bar End Finishers Grey (A9630440) A pair of turned aluminium Bar End Finishers finished in grey. Also available in alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with an Accessory Bar End Mirror.
2016 ALL NEW SPEED TRIPLE RANGE CLOTHING Our desire to get the most out of every ride applies as much to our clothing as it does to our bikes. Every piece of Triumph clothing is designed to play a part with technical innovations in materials and design, focusing on style, safety and comfort. Designed and tested by people that ride to deliver a perfect fit. FOR THE RIDE We want to bring you even more of what's going on in the fast moving riding world before it happens, so we ve had a change of gear. Our new For the Ride blog will be home to regular updates capturing the excitement, thrills and fascinating characters that make motorcycling our reason for getting up each day. It s a lifestyle thing, so we ll also be turning the spotlight on some of the people making the riding world the exhilarating place it is. fortheride.com www.triumphmotorcycles.co.uk 2013 2015 Triumph Motorcycles Terms and Conditions apply.