Spivi Installation Manual

Spivi Installation Manual

TBLE OF CONTENTS Contents CHPTER 1: BEFORE WE BEGIN... 2 CHPTER 2: UNPCKING THE SPIVI SYSTEM... 3 CHPTER 3: SYSTEM SSEMBLY... 4 CHPTER 4: TURNNING THE SYSTEM ON... 5 CHPTER 5: RDIO FREQUENCY (RF) INTERFERENCE... 5 CHPTER 6: IMPORTNT PRECUTIONS... 6 CHPTER 7: WRRNTY... 6 CHPTER 8: COPYRIGHT... 7 CHPTER 1: BEFORE WE BEGIN Congratulations on choosing the Spivi! Read this guide to learn how to: -ssemble the system in your studio -Make it ready for our remote configuration process Visit www.spivi.com/academy to learn more about your new system. 2

CHPTER 2: UNPCKING THE SPIVI SYSTEM Open the box to expose the system and packaging. Remove all items from the box including foam inserts. Ensure all the following items are included: Name Quantity Spivi Rendering Server (Computer) 1 B WIFI Router 1 C C dapter for WIFI Router 1 D XBOX Controller 1 E XBOX Controller Wireless Receiver 1 F Battery for XBOX Controller 2 G CT5 Network Cable 2 H Power Cord 1 I NT+ USB Stick 1 J NT+ WIFI Bridge 1 K USB Cable 1 L BLE USB Stick 1 F B D G C E dditional tools that may be helpful: - Zip ties H I K J L 3

CHPTER 3: SYSTEM SSEMBLY 1. Unpack the Spivi Rendering Server and physically install it anywhere near your sound system and where your display (LCD/TV/Projector) HDMI/DVI (for HD) or VG (for SD) cable is ready to connect. 2. Connect the Spivi Rendering Server to an outlet using the provided power cord. 3. Unpack the WIFI router and connect it to the power outlet using the provided C adapter. 4. Using a CT5 network cable, connect the WIFI router WN PORT (BLUE) to your internet infrastructure. This can be a wall mount RJ45 socket, another router or a network switch. Your infrastructure internet connection must have DHCP service enabled. 5. Using a CT5 network cable, connect the WIFI router LN PORT (YELLOW) to the Spivi Rendering Server. 6. Connect the XBOX Controller Wireless Receiver to a USB PORT on the BCK of the Spivi Rendering Server. 7. Using the provided USB cable, connect the NT+ WIFI Bridge to a USB PORT on the BCK of the Spivi Rendering Server. 8. Insert the NT+ USB Stick and the BLE USB Stick to the FRONT USB PORTS on the FRONT RIGHT side of the Spivi Rendering Server. 9. Unpack the batteries and install them into the XBOX controller. Back USB Ports CT5 Network Port to Spivi WIFI Router HDMI DVI NOTICE: DO NOT USE THESE VIDEO OUTPUTS! udio Output (Optional) * Computer back may look different 4

CHPTER 4: TURNNING THE SYSTEM ON To turn the system on: 1. Turn on the WIFI router using its power button, located on the back side of the router. 2. Turn on the Spivi Rendering Server (computer) by pressing once on the power button (located at the front-right side) 3. The NT+ WIFI Bridge will turn itself on automatically once it gets power from the computer. You should see a green LED blinking and a red LED with a steady light. CHPTER 5: RDIO FREQUENCY (RF) INTERFERENCE Radio frequency (RF) interference with other devices may cause intermittent loss of information. Wireless Internet access points, microwaves, cordless phones, or other wireless devices may cause frequency interference. To mitigate the chance of interference, set wireless access points to the lowest channel possible and keep the Spivi WIFI Bridge away from interfering devices. To change the channel on the access point, please consult manufacturer s documentation. Spivi utilizes NT+ and BLE technologies to ensure a robust and reliable connection between the various sensors used and our product. Sensors are defined as power meter sensors, heart rate strap sensors, cadence sensors, speed sensors, and controlled resistance sensors. Statement of Compliance for FCC and Industry Canada: This device complies with Industry Canada and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. Changes or modifications to this device not expressly approved by the party responsible for compliance with FCC regulations (the manufacturer) could void the user authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 5

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. CHPTER 6: IMPORTNT PRECUTIONS It is the responsibility of the owner to ensure that all users of this Spivi are adequately informed of all warnings and precautions. For questions regarding this guide, contact Customer Service at the number listed at the end of this guide. WRNING: ny of the provided products, parts and items are not water proof. CHPTER 7: WRRNTY Manufacturer s Warranty (under normal use) Spivi Rendering Server: One Year Parts, Electronics and ppearance: One Year WRNING: WRRNY VOIDS IF THE SPIVI COMPUTER HS BEEN USED FOR NYTHING ELSE BUT RUNNING THE SPIVI SOFTWRE OR IF NY 3rd PRTY SOFTWRE HS BEEN INSTLLED ON THE SPIVI COMPUTER. In the event of a warranty issue, SpiviTech LTD will repair or replace the item at its discretion. SpiviTech LTD is not responsible for any indirect or consequential costs or damages associated with the warranty of the product. Our products are not covered under warranty in cases exhibiting signs of abuse, improper maintenance or installation, crash, using the product with non-compatible components, or using the product for purposes for which it was not designed. This warranty is also void if the product has been modified from its original form, including changes in aesthetics, serial numbers or logos. Warranty Procedures: If it appears that a Spivi component is not working properly, please take the time to inspect and troubleshoot the system as best as possible. In many instances, solutions may be as simple as replacing a battery or reconnecting a cable. Often small parts can repaired at a computer shop, instead of the longer and more expensive option of sending the unit back for repair. To warranty the Spivi, return the product, where purchased or contact SpiviTech LTD. at 1-650-318-5280 6

CHPTER 8: COPYRIGHT ll rights reserved. No part of this publication may be copied, photographed, reproduced, translated, transmitted electronically or placed on digital media without the prior written consent of SpiviTech LTD. Trademarks Spivi is a registered trademark of SpiviTech LTD. Other product, brand, or trade names used in this guide may be trademarks or registered trademarks of their respective owners. Modifications SpiviTech LTD reserves the right to make improvements and/or updates to the products described herein at any time without notice. Customer Service Tel: 1-650-318-5230 Email: support@spivi.com www.spivi.com 7