Network Simulator Lab Study Plan



Similar documents
Interconnecting Cisco Networking Devices Part 2

: Interconnecting Cisco Networking Devices Part 2 v1.1

"Charting the Course...

Cisco Certified Network Associate (CCNA) 120 Hours / 12 Months / Self-Paced WIA Fee: $

Welcome to Todd Lammle s CCNA Bootcamp

Cisco Networking Professional-6Months Project Based Training

Introduction about cisco company and its products (network devices) Tell about cisco offered courses and its salary benefits (ccna ccnp ccie )

How To Learn Cisco Cisco Ios And Cisco Vlan

Skills Assessment Student Training Exam

Cisco Certified Network Associate Exam. Operation of IP Data Networks. LAN Switching Technologies. IP addressing (IPv4 / IPv6)

: Interconnecting Cisco Networking Devices Part 1 v2.0 (ICND1)

ISOM3380 Advanced Network Management. Spring Course Description

Working knowledge of TCP/IP protocol Suite IPX/SPX protocols Suite, MCSE or CNE or experienced in supporting a LAN environment.

Interconnecting Cisco Network Devices 1 Course, Class Outline

Interconnecting Cisco Networking Devices, Part 2 Course ICND2 v2.0; 5 Days, Instructor-led

INTERCONNECTING CISCO NETWORK DEVICES PART 1 V2.0 (ICND 1)

Switching Basics and Intermediate Routing CCNA 3 Labs and Study Guide Allan Johnson

Cisco Discovery 3: Introducing Routing and Switching in the Enterprise hours teaching time

CCT vs. CCENT Skill Set Comparison

INTERCONNECTING CISCO NETWORKING DEVICES PART 2 V2.0 (ICND 2)

Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0

: Interconnecting Cisco Networking Devices Part 2 v2.0 (ICND2)

COURSE AGENDA. Lessons - CCNA. CCNA & CCNP - Online Course Agenda. Lesson 1: Internetworking. Lesson 2: Fundamentals of Networking

Cisco Certified Network Associate - Design

Course Contents CCNP (CISco certified network professional)

Interconnecting Cisco Networking Devices: Accelerated (CCNAX) 2.0(80 Hs) 1-Interconnecting Cisco Networking Devices Part 1 (40 Hs)

IT-AD08: ADD ON DIPLOMA IN COMPUTER NETWORK DESIGN AND INSTALLATION

Lab Creating a Logical Network Diagram

50 Cragwood Rd, Suite 350 South Plainfield, NJ Victoria Commons, 613 Hope Rd Building #5, Eatontown, NJ 07724

Interconnecting Cisco Networking Devices, Part 2 **Part of CCNA Route/Switch**

Lab Organizing CCENT Objectives by OSI Layer

PT Activity 8.1.2: Network Discovery and Documentation Topology Diagram

Objectives. Router as a Computer. Router components and their functions. Router components and their functions

CURSO DE PREPARACION PARA LA CERTIFICACION CCNA (Cisco Certified Network Associate)

Course Venue :- Lab 302, IT Dept., Govt. Polytechnic Mumbai, Bandra (E)

How To Configure InterVLAN Routing on Layer 3 Switches

Lab Developing ACLs to Implement Firewall Rule Sets

Note: This case study utilizes Packet Tracer. Please see the Chapter 5 Packet Tracer file located in Supplemental Materials.

Global Learning & Development CCNA Curriculum Overview

Router and Routing Basics

IMPLEMENTING CISCO IP ROUTING V2.0 (ROUTE)

Brocade to Cisco Comparisons

Configure ISDN Backup and VPN Connection

Implementing Secured Converged Wide Area Networks (ISCW) Version 1.0

ASM Educational Center (ASM) Est. 1992

CCNA Routing & Switching

ITNW 2321 Networking with TCP/IP

Troubleshooting IP Routing

Sample Configuration Using the ip nat outside source static

Lesson Plans CCNA. (Exam ) Version 6.0

CDS and Clearing Limited Thapathali, Kathmandu 7 th Level (Technical) Syllabus

Device Interface IP Address Subnet Mask Default Gateway

CCBOOTCAMP s Comprehensive ICND2 Study Guide With Sample Questions

Introduction to Routing and Packet Forwarding. Routing Protocols and Concepts Chapter 1

Cisco Certified Network Expert (CCNE)

CCNA. Course Fee: 8500 INR (Lab Access, Software s, Books, Tool Kits & Tax Included) Course Duration: 5 Days

IMPLEMENTING CISCO SWITCHED NETWORKS V2.0 (SWITCH)

NetBrain Workstation Professional Edition 2.3 Release notes

Cisco 12 CCNA Certification

Sample Configuration Using the ip nat outside source list C

Cisco Certified Network Professional - Routing & Switching

Lab Load Balancing Across Multiple Paths

Administrative Distance

IP Addressing and Subnetting. 2002, Cisco Systems, Inc. All rights reserved.

Lab - Using IOS CLI with Switch MAC Address Tables

Configuring a Gateway of Last Resort Using IP Commands

Troubleshooting an Enterprise Network

Lab: Basic Router Configuration

PT Activity: Configure Cisco Routers for Syslog, NTP, and SSH Operations

CCNP v2 Eğitimi İçeriği

During this lab time you will configure the routing protocol OSPF with IPv4 addresses.

IOS NAT Load Balancing for Two ISP Connections

ICND IOS CLI Study Guide (CCENT)

IP Routing Between VLANs

The New CCNA Routing and Switching Curriculum. Nilay Ghoghari, Product Management Barb Termaat, Product Development May 23, 2013

How to teach computer networks using simulation software

Chapter 7 Lab 7-1, Configuring Switches for IP Telephony Support

Cisco Certified Network Professional (CCNP Routing & Switching)

CCNA 2 v5.0 Routing Protocols Final Exam Answers

Cisco Data Centre: Introducing Cisco Data Center Networking

Exam Question Formats Tips for Taking Exam CERT DAY PREPARATION. Adapted APAC/Japan Technical Advocacy Team Documents

LAB Configuring NAT. Objective. Background/Preparation

Lab 7-1 Configuring Switches for IP Telephony Support

CCNA Exploration 4.0: (II) Routing Protocols and Concepts. Chapter 1: Introduction to Routing and Packet Forwarding

Table of Contents. Cisco Configuring a Basic MPLS VPN

Router Lab Reference Guide

Configuration Professional: Site to Site IPsec VPN Between Two IOS Routers Configuration Example

Topic 7 DHCP and NAT. Networking BAsics.

Implementing Cisco IOS Network Security v2.0 (IINS)

Table of Contents. Cisco How Does Load Balancing Work?

Lab Configuring OSPF with Loopback Addresses

Packet Tracer 3 Lab VLSM 2 Solution

Lab Advanced Telnet Operations

Objectives. Background. Required Resources. CCNA Security

Felix Rohrer. PT Activity 7.5.3: Troubleshooting Wireless WRT300N. Topology Diagram

NX-OS and Cisco Nexus Switching

Textbook Required: Cisco Networking Academy Program CCNP: Building Scalable Internetworks v5.0 Lab Manual.

Configuring a Leased Line

Transcription:

The CCNA 640-802 Network Simulator has 300 lab exercises, organized both by type (Skill Builder, Configuration Scenario, Troubleshooting Scenario, and Subnetting Exercise) and by major topic within each type. This document lists tables that cross-reference book chapters of Cisco CCENT/CCNA ICND1 100-101 Official Cert Guide, Cisco CCNA Routing and Switching 00-101 Official Cert Guide, and Cisco CCNA Routing and Switching 200-120 Official Cert Guide Library, compared to the labs in CCNA 640-802 Network Simulator. When using the books and simulator, you might want to read a chapter and then do the labs related to that chapter as listed here. ICND1 Skill Builder Labs ICND1 7 ICND1 7 ICND1 7 Switch CLI Exec Mode Switch CLI Configuration Process I Switch CLI Configuration Process II Setting Switch Passwords Configuring Switch IP Settings Interface Settings I Interface Settings II Interface Settings III Switch Forwarding I Switch IP Connectivity I VLANs I VLANs II VLANs III

0 0 0 0 0 Interface Status I Interface Status II Interface Status III Interface Status IV Switch Security I Switch Security II Switch Security III Switch Security IV Router CLI Exec Mode I Router CLI Exec Mode II Router CLI Configuration Process Setting Router Passwords Configuring Router IP Settings Configuring Local Usernames Configuring SSH Migrating to a New IOS Image Setting the Configuration Register Comparing Configuration Files Ignoring the Startup-Config File Booting a New Router IOS Terminal History I Terminal History II Topology Analysis Configuring IP Addresses I Configuring IP Addresses II Configuring IP Addresses III Configuring IP Addresses IV Examining the IP Routing Table Connected Routes Static Routes I Static Routes II

Static Routes III Static Routes IV Default Routes IP Classless Subnet Zero I Subnet Zero II Loopback Interfaces RIP Configuration I RIP Configuration II RIP Configuration III RIP Configuration IV RIP Configuration V RIP Configuration VI PC IP Commands I PC IP Commands II PC IP Commands III Using and Suspending Telnet Connections Using debug Testing Using pings with Hostnames RIP Verification I RIP Verification II Configuring Hostnames Serial Link Config I Serial Link Config II Serial Link Config III Serial Link Config IV Interface Status V Interface Status VI

ICND1 Configuration Scenario Labs Completion Dates After Book and Chapter Lab Title Switch Interfaces and Forwarding Switch IP Connectivity Switch Security I Configuring VLANs I The Initial Configuration Dialogue (Setup) New Job I Rebuild a Config SSH and Telnet Subnetting and Addressing I Subnetting and Addressing II Subnetting and Addressing III Static Routing I Static Routing II RIP-2 Configuration I RIP Configuration II RIP Autosummary IP and MAC Address Comparisons IP Classless Serial Link Config I ICND1 Troubleshooting Scenario Labs Completion Dates After Book and Chapter Lab Title Switch Forwarding I Port Security Path Analysis I Network Discovery I Network Discovery II IP Addressing and Routing IP Routing I

ICND1 Subnetting Exercise Labs Subnet ID Calculation I Subnet ID Calculation II Subnet ID Calculation III Subnet ID Calculation IV Subnet ID Calculation V Subnet ID Calculation VI Subnet ID Calculation VII Subnet ID Calculation VIII IP Address Rejection I IP Address Rejection II IP Address Rejection III IP Address Rejection IV IP Address Rejection V IP Address Rejection VI IP Address Rejection VII IP Address Rejection VIII IP Address Rejection IX IP Address Rejection X IP Address Rejection XI Subnet ID Calculation IX Subnet ID Calculation X Subnet ID Calculation XI IP Route Selection I IP Route Selection II IP Route Selection III IP Route Selection IV IP Route Selection V IP Route Selection VI IP Route Selection VII IP Route Selection VIII IP Route Selection IX IP Route Selection X

ICND2 Skill Builder Labs VLAN Config I VLAN Config II VLAN Config III VLAN Config IV VLAN Config V VTP Config I VTP Config II VTP Config III VTP Config IV VTP Config V Trunking Config I Trunking Config II Trunking Config III Trunking Config IV STP Analysis I STP Analysis II STP Config I STP Config II STP Config III Etherchannel ICND2 4 IP Addressing I ICND2 4 IP Addressing II ICND2 4 IP Addressing III ICND2 4 traceroute I ICND2 16 Default Route I Zero Subnet Switch IP address ACL I ACL II ACL III ACL IV

ACL V ACL VI Named ACL I Named ACL II Named ACL III ACL Analysis I Autosummary Routing Analysis I ICND2 4 Traceroute II EIGRP Serial Configuration I EIGRP Serial Configuration II EIGRP Serial Configuration III EIGRP Serial Configuration IV EIGRP Serial Configuration V EIGRP Serial Configuration VI EIGRP Frame Relay Configuration I EIGRP Frame Relay Configuration II EIGRP Frame Relay Configuration III EIGRP Authentication I EIGRP Authentication II EIGRP Route Tuning I EIGRP Route Tuning II EIGRP Route Tuning III EIGRP Route Tuning IV EIGRP Neighbors I EIGRP Neighbors II EIGRP Neighbors III OSPF Serial Configuration I OSPF Serial Configuration II OSPF Serial configuration III OSPF Serial Configuration IV

OSPF Serial Configuration V OSPF Serial Configuration VI OSPF Router ID I OSPF Router ID II OSPF Frame Relay Configuration I OSPF Frame Relay Configuration II OSPF Frame Relay Configuration III OSPF Authentication I OSPF Authentication II OSPF Metric Tuning I OSPF Metric Tuning II OSPF Metric Tuning III OSPF Neighbors I OSPF Neighbors II OSPF Neighbors III OSPF Neighbors IV OSPF Neighbors V Serial Configuration I Serial Configuration II Serial Authentication I Serial Authentication II Frame Relay Configuration I Frame Relay Configuration II Frame Relay Configuration III Frame Relay Configuration IV Frame Relay Configuration V Frame Relay Verification I Frame Relay Verification II Frame Relay Verification III NAT Configuration I NAT Configuration II

NAT configuration III NAT configuration IV NAT configuration V NAT configuration VI NAT Configuration VII IPv6 Address Configuration I IPv6 Address Configuration II IPv6 Address Configuration III IPv6 Address Configuration IV IPv6 Address Configuration V IPv6 Address Configuration VI IPv6 Address Configuration VII IPv6 Address Configuration VII IPv6 Address Configuration IX IPv6 Routing Configuration I IPv6 Routing Configuration II IPv6 Routing Configuration III IPv6 Hostnames IPv6 Address Configuration I IPv6 Address Configuration II IPv6 Address Configuration III IPv6 Address Configuration IV IPv6 Address Configuration V IPv6 Address Configuration VI IPv6 Address Configuration VII IPv6 Address Configuration VII IPv6 Address Configuration IX IPv6 Routing Configuration I IPv6 Routing Configuration II IPv6 Routing Configuration III IPv6 Hostnames

ICND2 Configuration Scenario Labs VTP I VTP Transparent Mode VLAN Trunking I VLAN Trunking II STP Analysis I STP Configuration II IP Addressing and Configuration I IP Addressing and Configuration II IP Default Routing and Classless/Classful Default Routes Standard ACL I Extended ACL I Extended ACL II OSPF Config I OSPF Config II OSPF Config III OSPF Metric Manipulation EIGRP Config I EIGRP Config II EIGRP Metric Manipulation I EIGRP Variance and Maximum Paths I Frame Relay Config I Frame Relay Inverse ARP Frame Relay Correlation NAT Config I NAT Config II IPv6 Config I IPv6 Config II

ICND2 Troubleshooting Scenario Labs ICND2 3 ICND2 3 Path Analysis I Path Analysis II Path Analysis III Path Troubleshooting I Path Troubleshooting II Path Troubleshooting III Path Troubleshooting IV VLAN Troubleshooting I OSPF Troubleshooting I Routing Analysis III Network Expansion NAT IP Routing II ICND2 Subnetting Exercise Labs VLSM Overlap I VLSM Overlap II VLSM Overlap III VLSM Overlap IV VLSM Overlap V VLSM Overlap VI VLSM Overlap VII VLSM Overlap VIII VLSM Overlap IX VLSM Overlap X VLSM Overlap XI IP VLSM Route Selection I IP VLSM Route Selection II IP VLSM Route Selection III

IP VLSM Route Selection IV IP VLSM Route Selection V IP VLSM Route Selection VI IP VLSM Route Selection VII