Oil skimmer is a device which helps remove surface oil. Skimmer is mounted in the selection location. An oil is absorbed by the teflon tape and is removed for example from bath to another external container (spillomatic). The illustration shows the way the surface oil. Skimmer is the cheapest and most effective method to remove surface oil. It is a simple devices that works may years with minimal maintenance costs. It is important, the pure liquid (no bacteria) will increase its durability and cutting tools and provide optimal working conditions for environment operators. Save time and money. Use in your machine park oil skimmer. Minimize the risk of bacteria in place of standing liquid. Care for environment. We have several types of oil skimmer: OS-Nimatic, OS-28 Stationary, OS-33 Stationary Mini, OS-35 Stationary Delux, OS-39 Universal, OS-41 Portable Mini, OS-42 Portable, OS-56 Buster, OS-Magnetic (A and B). http://www.cieplowniasiemianowice.pl/poch-aniacz.html http://www.cieplowniasiemianowice.pl e-mail: sprzedaz@cieplowniasiemianowice.pl
Save time and money that can by used more effectively in other sectors of the company. Emulsion mixer provides accurate mixing of fluids during the cooling lubricants and other metalworking fluids, which must be mixed with water. Mixer saves costs and is very easy to install. The newly developed auto emulsion mixer is designed for medium and large consumers of fluid, antifreeze for windscreen washer fluids and in agriculture by mixing fertilizer. This simple reliable and competitive auto emulsion mixer is not only easier to use, but it saves a lot of time, money and troubles. This devices can be used in garages, vehicle service station, the performers in agriculture and the military establishments of mechanical, heating companies and more. Emulsion mixer is controlled by the pressure of flowing water. http://www.cieplowniasiemianowice.pl/mieszarka.html http://www.cieplowniasiemianowice.pl/auto-mieszarka.html Save money and achieve optimum operating conditions check out his liquid cooling. With the help of the refractometers can quickly read actual concentration of working fluid on the surface machined metal (lubricating or cooling fluid). It is important the machining fluids have the appropriate concentration. Too low concentration is poor lubrication, increases the risk of corrosion and a faster increase in temperature cutting tools and workpiece material. This increases production costs. You optimize the working conditions and save by using the refractometers. We have several types of refractometers: Brix 0-15%, Brix 0-18%, Brix 0-32%, Auto, Digital, Brake fluid, For alcohol. http://www.cieplowniasiemianowice.pl/refraktometr-b.html http://www.cieplowniasiemianowice.pl/refraktometr-c.html http://www.cieplowniasiemianowice.pl/refraktometr-brake.html
Digital handled ph meter is used to measure the ph of the liquid (acidity and alkalinity). It is very accurate and easy to use. Digital ph meter is powered on the batteries, it can be used anywhere. It is used as an excellent tool for security both at home and in the industry to provide information about the chemical properties of liquids. Digital ph meter is ideal tool to control the relevant parameters of water in the pool. In summer it became the popular to have the pool in garden. Therefore, it is important to maintain proper ph in order to maintain its purity. Handheld ph meter is very easy to use and very accurate, so is ideal for this purpose. http://www.cieplowniasiemianowice.pl/ph.html The illustration shows a lot of machine that are connected to a reservoir container Spillomatic. Spend oil from each machine is automatically pumped to the outer tank, where used oil is stored. Therefore, during the operation will not have dirty oil spills, your operators will save time. So the reservoir container Spillomatic is automated you don t have to worry that you forget to empty it and oil is spilled. Spillomatic is a container with built-in pump, which switched on every time when tank is full. The pump is automatically switched on when the level of the liquid/oil reaches the desired level. The tank is connected to one side to the machine where the spilled oil must be collected and on the other side is connected to an external/central reservoir (eg barrels) in which overworked oil is stored. http://www.cieplowniasiemianowice.pl/spillomatic.html
When the liquid in the container reaches the level where is the sensor, pump will started and oil will be pumped. This will prevent you have transferred the liquid over the edge of container/tank. Level sensors is a chip and accurate way of regulation and control of liquid in tanks, tubs, etc. In general the level sensors is very helpful, whenever the liquid level should be checked. We have two types of level sensors: for vertical installation (type V ) and for horizontal installation (type H ). Each type is available in two models. One to turn on the pump when liquid level rises above the switch and the second to turn off the pump when the liquid level drops. These level sensors are extremely accurate and work well even in very difficult conditions, such as acid baths containing or alkaloids. Our manufacturer has a long experience and produce professional level sensors which are tested. These devices were tested over a long period of time. Each sensors is able to turn on/turn off more than 10 million times. http://www.cieplowniasiemianowice.pl/czujniki.html Bag filters are used in industrial production and in many other places where the liquid flows in a continuous or periodic must be filtered before the next process technology. Liquid is placed on the filter from the top. Then passed through the so-called particle filter, which captures effects of pollution. Filtered liquid leaves the filter bottom slot. Bag filters are easy to install and safe to use. We have two types of filters: ALGS and BFOT. http://www.cieplowniasiemianowice.pl/filtry.html
It is designed to transport barrels in an upright position. With the mixer you have a perfect emulsion transport units. Trolley barrels also checked as the perfect truck for all types of containers (eg. wastebasket, containers for scrap). Two rotary and two permanent wheels ensure maximum mobility and stability of the trolley. Barrels can be placed on the trolley or removed from it and transferred to trucks with a pallet truck. Height the trolley is consistent with euro pallets. So barrels can be removed directly to the palette and from pallets. http://www.cieplowniasiemianowice.pl/beczki.html It is ideal for those who want to transported concentration is special barrels. In the same trolley you can have everything in one: emulsion mixer and concentrate in a barrel, which is safely transported. This trolley easily overcomes narrow gangway of the workshop or the production hall. This unit is also ideal for mixing soap with water. The trolley designed to transport liquid is supplied with the mixer made in stainless steel. Emulsion mixer which mounted on trolley is also available in aluminum in the case of metalworking fluids. http://www.cieplowniasiemianowice.pl/w-and-oacute-zek.html
Transportation filtration system is designed to effectively remove unwanted particles in industrial fluids, such as purification of water for washing in the food industry, waste water discharged (to filter or part of its filtering eg water and sewer), purification of machining fluids, cleaning preparations, cooling lubricant, chemical cleaning fluids. Filter system is constructed on the basis of a mechanical filter in which the liquid column provides adequate pressure required for filtration. The device is constructed of stainless steel. The device is easy to install in the parks machinery. Performance is depend of the viscosity of the liquid, the level of filtration, particles contents in the liquid. Tanks can be custom made in all size. On stock are only available standard size, which fit the size of the device ready for mounting the pump. The tank contains a standard cover, drainage valves for optimal performance. Lower frame under the tank is not standard. http://www.cieplowniasiemianowice.pl/system.html
Metal mesh containers are an excellent means of transport and storage. These containers are galvanized, made from good quality steel. Our containers are collapsible with the possibility of stacking. Standard containers sizes are based on euro pallets and industrial pallets. We perform the contact according to customer s design and documentation. We perform project that offer interesting solutions. We guarantee the highest quality products and competitive prices. Data container v1 Data container v2 External dimensions 1200 x 800 x h995mm External dimensions 1200 x 1000 x h1194mm Load 700kg Load 450kg Tare weight 61kg Tare weight 67kg Static storage 5 levels Static storage 6 levels Data container v3 small External dimensions 1200 x 1016 x h934mm Load 450kg Tare weight Static storage 52kg 5 levels
Small container (v3 small) Container type preforma Each container is available with polypropylene lining or without.
Each container is available in version with shared front wall. Dear Sirs, we hope to cooperate. We are at your disposal. If you have any doubts, we entice you to ask question. Please ask question in English. Best Regards Marketing Department