Overview of Order 8100.9 DAS, DOA and SFAR 36 Authorization Procedures Conducted via Interactive Video Teletraining on the Aviation Training Network (ATN) Presented by Ralph Meyer AIR-140 Kurt Krumlauf, ANM-108L
About This IVT Briefing This briefing reviews the requirements contained in Order 8100.9, DAS DOA and SFAR 36 Authorization Procedures. Order 8100.9 prescribes the FAA policy related to delegated organizations and the functions they perform. What Is ATN? ATN stands for the Aviation Training Network, a one-way video, 2-way audio, satellite broadcast facility located at the FAA Academy in Oklahoma City Participants are located at any of more than 60 receive sites around the country and can see the instructor and course visuals on television sets in their classrooms. The participants can communicate with the instructor through Viewer Response System keypads. During the live presentation, when a participant has a question or the instructor asks for specific participant responses to questions, the participant(s) can signal to the instructor using their keypad responders. The collective participant responses or the name of a specific participant signalling a question are immediately visible to the instructor on the console at the broadcast site. The instructor can then respond as needed. When the instructor calls on a specific participant to speak from a site, participants at each of the other sites can simultaneously hear the participant who is speaking. Who Is the Target Audience? All ACO, MIDO and FSDO personnel responsible for managing DAS, DOA and SFAR 36 organizations. 2
Who are the Presenters? Ralph Meyer is the AIR-140 program manager for delegated organization policy development. Was the team leader for DDS policy and also works on the Organization Designation Authorization (ODA) rulemaking and policy development teams. Kurt Krumlauf is the Los Angeles ACO manufacturing inspection specialist. He is a member of both the DDS and ODA policy development teams. What Will You Learn? An understanding of the FAA's requirements for managing delegated organization. Selection and Appointment Process Qualification Requirements for the Organization and their staff members. The roles of the various FAA offices in managing the organization and their activity Who Is the Target Audience? All ACO, MIDO and FSDO personnel responsible for managing DAS, DOA and SFAR 36 organizations. 3
Background Order 8100.9 DAS, DOA SFAR 36 Authorization Procedures Ralph Meyer AIR-140 405 954-7072 ralph.meyer@faa.gov Kurt Krumlauf ANM-108L 562 627-5285 kurt.krumlauf@faa.gov What is a delegation/authorization holder Organization authorized to make approvals on behalf of the FAA 49 USC 44702 - Delegation FAA may delegate a matter related to Examination, testing, or inspection necessary to issue a certificate Issuing certificate Subject to regulations, supervision and review May rescind at any time for any reason 1 2 Background Delegation is not a right 44702 Delegation.the Administrator may delegate vs. 44703 Airman certificates.the Administrator shall issue.. Some functions are not delegated Issue TC Approve or issue ADs Background Cont d Regulatory Authority DAS -- Part 21, Subpart M Amendment 21-6 DOA -- Part 21, Subpart J Amendment 21-5 SFAR 36 3 4 DAS Eligibility-Repair Station, Operator, Manufacturer Authority Issue STC Issue special airworthiness certificates in experimental category for the purpose of showing compliance to the regulations Amend standard airworthiness certificates DAS Limitations Products covered by the alteration authority - and capability - of the organization Findings for Parts 34 or 36 not delegated Any other limitations imposed 5 6 4
DASs DASs cont. Aero Twin American Airlines American Eurocopter Atlantic Aero Daussalt Falconjet Duncan Aviation Boeing Century Flight Systems Chromalloy L-3 Communications Electrosonics Floats and Fuel Cells Garrett Gulfstream Heli-Support Hollingsead Int l Honeywell Keystone Helicopter Corp Learjet LORI Rockwell Collins TIMCO United Airlines US Air 7 8 DOA DOA cont. Eligibility Holder of TC, PC Small airplanes and gliders Turbojet engines<1000 lb Commuter category airplanes Turboprop/Recip<500 HP Normal category rotorcraft Props used on above Authority-make findings leading to Type certification Type design changes Amendment of production certificate Issue Experimental certificates Airworthiness approval tags Airworthiness Certificates Export approvals 9 10 Cessna (2) Hartzell McCauley Piper Raytheon DOAs SFAR 36 Eligibility Air carrier or commercial operator of large aircraft Domestic repair station Authority Approve for service after performing major repair using technical data not approved by the Administrator Essentially an exemption to 121.379(b) 135.437(b) 145.51 11 12 5
SFAR 36s SFAR 36s cont. Advanced Industries Airborne Express American Airlines Boeing Continental Airlines Dallas Airmotive Federal Express Honeywell Kosola & Assoc Northwest Airlines Rolls-Royce Triumph Accessory Services Triumph Air Repair TWA United Airlines 13 14 Background Background cont. DDS team chartered in Aug 97 Consolidate existing policy Develop appointment/oversight criteria Consider future rules as feasible Target date Dec 98 Prototype concept approved Apr 99 Workshop Jul 99 Follow on workshop Dec 00 Order 8100.9 issued Aug 2002 15 16 8110.37 DER Handbook Order 8120.2 Production Approval and Surveillance Foundation 2150.3 Compliance and Enforcement. Order 8000.9 DAS/DOA/SFAR 36 Procedures 8100.8 Designee Management Handbook Order 8110.4 Type Certification Process 8300.10 Airworthiness Inspectors Handbook 8130.28 Airworthiness Designee Management... Order 8130.2 Airworthiness Certification of.. Order 8100.9 Content Chapter 1-Introduction Chapter 2-FAA Roles and Responsibilities Chapter 3-DDS Qualifications, Responsibilities & Authority Chapter 4-Designated Alteration Stations Chapter 5-Delegation Option Authorizations Chapter 6-SFAR 36 Authorizations Chapter 7-Designee Information Network Chapter 8-Termination 17 18 6
Order 8100.9 Content cont. Appendix 1-Sample Forms and Letters Appendix 2-Procedures Manual Appendix 3-Certification Plan Appendix 4-Conformity Plan Appendix 5-Technical Evaluation Procedures and Criteria Chapter 1 Introduction Implementation (Para 1-5) 18 months Update procedures manual Evaluate Authorized Representatives FAA/organization plan Meet with authorization holders within 60 days FAA managing offices determine timeframe 19 20 Chapter 1 Related Publications (Para 1-9) Yes, they apply Key Definitions (Para 1-10) Authorized Representative (AR) Evaluation Panel Organization Management Team (OMT) OMT Lead Acronyms (Para 1-11) Chapter 2 - FAA Roles and Responsibilities 21 22 Chapter 2 Application Appointment Oversight Organization Management Team Para 2-2 Each organization is assigned an Organization Management Team (OMT) Consists of ACO, CMO, MIDO, FSDO and AEG personnel as appropriate 23 24 7
Organization Management Team Para 2-2 Responsible for all aspects of the organization General supervision and oversight Project oversight Evaluations Organization Management Team Para 2-2 DAS--ACO, MIDO, FSDO, AEG DOA--ACO, MIDO, AEG SFAR--ACO, FSDO ACO-engineering/flight test approvals MIDO-conformity/airworthiness/production approvals FSDO-project coordination, general oversight AEG-functions related to project 25 26 OMT Lead Application/Selection Process OMT lead assigned by ACO Responsibilities Coordination with other OMT members Communication with organization Arranging evaluations Communicate Application submittal Review for basic eligibility/qualifications Review staff members qualifications Review approve procedures manual 27 28 Application Para 2-3.a. DAS and DOA applications sent to the ACO ACO must acknowledge in writing within 30 days SFAR applications sent to the FSDO FSDO follows procedures in 8300.10 for coordination with ACO Application Para 2-3.b. Include: FAA Form 8100.8 Statement of Qualifications Cover Letter stating authority sought Description of eligibility and qualifications Administrator s name and experience AR listing--resumes Including evidence of organization s evaluation of proposed staff members --Like 8100.8! 29 30 8
Selection Process Para 2-4.a. Initial Screening ACO (DAS and DOA) or FSDO (SFAR 36) determines if basic requirements are met FAA has a need for the new appointment Organization holds the current certificate(s) required by the FAA regulations Evaluation Panel (EP) Para 2-4.b. After determining eligibility the appointing office will organize an EP EP consist of the accountable directorate rep, and the prospective OMT EP must be qualified and familiar with the functional areas for which the delegation is sought 31 32 Evaluation Panel The EP must consider if: Para 2-4.b. FAA has adequate personnel to oversee/ and support the appointment Applicant employs or has available a staff of qualified engineers, flight test, and inspection personnel Applicant has adequate facilities Administrator and AR's have integrity, sound judgment, and cooperative attitude Authorized Representatives (AR) Para 2-4.c. Organization evaluates the proposed AR's using the applicable criteria in Order 8100.8 Selection process must be defined in the Procedures Manual 33 34 Authorized Representatives (AR) Para 2-4.c. Application contains evidence of the review and summary of each AR's qualifications AR qualification summaries not required for existing designees Unless the proposed functions were not previously delegated to the AR. Procedures Manual Approval Para 2-4.d. EP reviews the proposed procedures manual to ensure the processes comply the regulations and applicable FAA Orders. When acceptable, the EP will approve the procedures manual Managing office(s) will execute an MOU with the officials of the organization 35 36 9
Denial Para 2-4.e. Denial letter sent to the applicant Applicant may appeal within 60 days Appeal panel will consider appeal Appeal panel will consist of at least: 2 office managers Experienced ASE or ASI who was NOT part of the evaluation panel Appeal Panel Para 2-4.f. Appeal panel will review appeal Determine if evaluation was conducted properly Consider all information available May interview applicant and EP members 37 38 Appeal Panel Para 2-4.f. Appeal panel may Uphold denial Override denial Request that any part of the process be repeated Appeal panel shall make decision within 60 days Appointment Para 2-5 After signing MOU the appointing office will send an authorization letter to the applicant Authorization letter will include the authorization number, limitations, location of facilities Example in Appendix 1 Appointing office will provide the names and phone numbers of the OMT 39 40 Oversight Para 2-6. OMT oversight responsibilities Procedures Procedures Manual Oversight of certificate holder Project PNL review FAA participation Performance Technical data evaluations Non-scheduled supervision Oversight by the OMT ACO OMT members are responsible for Oversight of the administrator, engineering and flight test ARs Certification procedures MIDO OMT members are responsible for: Oversight of the inspection and airworthiness staff Procedures for the inspection and airworthiness functions 41 42 10
Oversight by the OMT FSDO OMT members are responsible for: Informing the ACO of any changes in the certificate for which eligibility was determined. Flight Standards Certificate management activity associated with an authorization holder. Ensuring DAS alteration capability for proposed projects AEG OMT members Carrying out AEG responsibilities during certification projects OMT Responsibilities Para 2-6. Continuously monitor performance Review AR's project work for accuracy if needed Review project notifications and determine FAA involvement in the project Ensure authorization holder complies with the approved procedures manual Ensure the authorization holder and ARs have access to current policy and guidance 43 44 OMT Responsibilities Para 2-6. Verify ARs act within scope of authority Review the accuracy of official documentation and completed project records Coordinate corrective actions when necessary Evaluations Para 2-6.b. Focus is on the performance of the system and how the functions are carried out Adherence to procedures manual, FAA orders and FAA regulations Considerations Adherence to procedures Integrity, cooperative attitude Technical competence Knowledge of certification processes 45 46 ACSEP Evaluations Para 2-6.c. Process evaluation to determine that regulatory and policy requirements are met Done in accordance with Order 8100.7 Done every two years for DAS/DOA three years for SFAR Technical Data Evaluations Para 2-6.d. Evaluates the compliance, inspection and airworthiness approvals Determines products and data produced are technically acceptable and comply with the FAA regulations/orders Criteria in Appendix 5 Performed at least every 2 years Nonscheduled evals conducted as warranted 47 48 11
Corrective Action Para 2-6.e. OMT lead notifies authorization holder's administrator of items requiring corrective action May require changes to the system and may mandate changes to the authorization OMT will ensure corrective action is taken by physically visiting the facility All findings are to be tracked and re-evaluated after corrective action is implemented General Oversight The managing ACO must maintain a file for each authorization contain the information outlined in the order 49 50 Revisions to Procedures Manual OMT reviews and approves revisions to the procedures manual including proposed AR changes. AR Changes Authorization holder sends documentation showing the evaluation and recommendations Proposed AR's must be acceptable to the FAA before they can perform any function OMT lead notifies the authorization holder of denial or approval on AR changes within 15 working days. AR is added to the procedures manual 51 52 Guidance Information OMT will assist getting access to regulations, directives, advisory circulars and policy memos Available on the web av-info.faa.gov/dst Chapter 3 - DDS Qualifications, Responsibilities and Authority 53 54 12
General Qualifications Must be in U.S. Sufficient need Successful history Para 3-2 Demonstrated Integrity Employ Qualified staff Administrator Facilities Knowledge and Experience Qualification Requirements Para 3-7.a. Delegation Administrator 5 years experience working with the FAA Comprehensive knowledge of FAA policies and regulations History of sound judgment, demonstrated integrity and cooperative attitude toward the FAA Does not have to be staff AR 55 56 Qualification Requirements ARs Para 3-7b. Must meet criteria in 8100.8 for designees performing similar functions Experience with the organization may be used in lieu of experience working with the FAA Don t have to be designee Use of existing designees encouraged Qualifications AR Trainees Para 3-7.b.(5) Prove experience to organization Not authorized to make approvals/conformity determinations Procedures manual must include process for trainee development 57 58 Organization s Responsibility Para 3-3 Representative of the FAA All FAA regulations/policies apply Must not pressure or influence Authorized Representatives Memorandum of Understanding outlines authority and responsibility Signed prior to appointment Appendix 1 Para 3-4 Staff Responsibility Para 3-5 Delegation Administrators Ensures compliance Responsible for management of the authorization May make approvals as specified in the procedures manual Focal point for FAA communication 59 60 13
Responsibility Para 3-5 Authorized Representatives Make findings of compliance or determinations of conformity or airworthiness Must act independently and impartially when performing FAA functions Avoid conflict of interest Procedures Manual Defines processes for FAA functions and management Format and General Requirements provided in Sec 3-8 and Appendix 2 Detailed requirements for each authorization type in Chapters 4-6 Procedures manual must be approved by the FAA Changes require FAA approval before implementation 61 62 Procedures Manual - General Para 3-8 Limitations of authorization Signatures of ARs and functions authorized Description of certification/approval procedures Forms AR selection Procedures Training requirements Self audit procedures Training Para 3-9 In house training by authorization holder FAA Seminars Administrators attend DAS/DOA/SFAR 36 standardization seminar every two years ARs attend training required of similar designees 63 64 Self Evaluation Para 3-11 Tool for the authorization holder to identify and correct deficiencies Oversight of ARs work Evaluation of certification/compliance processes Self Disclosure Chapter 4 DAS AUTHORIZATIONS 65 66 14
Chapter 4-DAS Para 4-1 Eligibility, Authority Limitations STC approval authority limited to alteration authority/capability of the organization ACO may impose limitations as necessary ACO must consider ARs qualifications and capabilities when determining limitations Chapter 4-DAS cont. Para 4-1 Not allowed Interpretations of airworthiness standards Part 34/36 findings Application of equivalent safety findings Special conditions, exemptions 67 68 Chapter 4-DAS cont. Para 4-1 Service Difficulties DAS must investigate service difficulties identified by the FAA DAS should monitor known service difficulties and notify the FAA of items requiring corrective action Maintain STC data files Maintain airworthiness certification data files Chapter 4-DAS cont. Para 4-2 STC Process flow- Submittal of PNL Review/agree to PNL by the OMT Applicant shows compliance DAS issues experimental certificate for flight tests (if required) Authorized Representatives perform inspections and tests and complete forms and approvals for the FAA 69 70 Chapter 4-DAS cont. Para 4-2 STC Process flow- FAA performs FAA inspections/tests (if required) AEG reviews ICA DAS satisfies 21.463 Issue STC Program Notification Letter Para 4-2.c.(1) Everything the FAA could possibly want to know about a proposed project See Appendix 3 for cert plan details. See Appendix 4 for conformity plan details PNL should be submitted early in the program Activity performed prior to submittal. at risk DAS must notify the FAA of significant changes in scope or schedule 71 72 15
Program Notification Review Para 4-2.c.(2) OMT lead must coordinate with other members MIDO FSDO ACO specialists in each technical area affected Program Notification Review Para 4-2.c.(2) Consider Ability of organization to alter the product Ability ARs to find compliance and determine conformity Acceptability of the certification and conformity plans Deny the project if appropriate Determine FAA participation Respond within 30 days in writing-not email! 73 74 FAA Participation Para 4-2.c.(3) Optimize delegation FAA will participate in Areas reserved for the FAA ICA Operational Suitability Cont. FAA Participation Para 4-2.c.(3) MMEL changes Special conditions, rulemaking, etc. Equivalent level of safety findings Areas the DAS has not demonstrated satisfactory capability 75 76 PNL Response Para 4-2.c.(2) Respond in writing within 30 days Address the following Acceptability of certification and conformity plans Acceptability of certification basis Info on FAA personnel involved in the project Identify FAA participation Requirement for the DAS to notify the FAA of changes Make sure they know when to AEG Participation Para 4-2.c.(4) AEG Does not delegate functions Operational Suitability MMEL Revisions Crew Training OMT lead responsible for coordinating with AEG 77 78 16
DAS Findings Para 4-2.c.(5-6) On behalf of the FAA Same approvals, forms 8110.9 for compliance documentation ARs may also perform functions for the applicant But they aren t ARs when they do! Engineers developing design data Except* ARs making FAA conformity determination may NOT sign the statement of conformity for the applicant STCs Para 4-2.c.(7) DAS may only issue STC in the name of the repair station, manufacturer or operator Not in the name of the DAS organization Numbers issued by block or project by project All STCs or amendments must include -D designator ACOs should include DAS-issued STCs in their monthly reports for STC summary 79 80 STCs Para 4-2.c.(7-9) DAS must submit data files to FAA within 30 days Procedures manual must identify any storage arrangements DAS may not re-issue STCs for transfer STC amendments require submittal of PNL ACO STC Data Files Para 4-2.c.(8) ACO must maintain limited data files for DAS-issued STCs PNL Special Conditions, ELOS findings, exemptions Response Project Correspondence Cert Plan Compliance Checklist Master Drawing List FMS TIA and TIR STC 81 82 Airworthiness Certification Para 4-2.d. Application Form 8130-6 must be submitted for all airworthiness certs issued or amended Signed by registered owner or agent Airworthiness Certification Para 4-2.d. Experimental Certificates** Show compliance only Original certificate must be surrendered DAS must obtain MIDO approval of limitations and conditions Copy of certificate, application and original certificate sent to MIDO for processing 83 84 17
Airworthiness Certification Para 4-2.d. Amended Standard Airworthiness Certificates Copy of certificate, application and experimental certificate sent to MIDO for processing **-May use provisions of 8130.29 DAS Off-Site Activities Order 8100.12 Alteration of the aircraft at a location other than the approved DAS facility Off-site projects require specific project approval by the OMT Project must be accomplished at FAA certified repair station or operator with appropriate ratings Repair station DAS may not travel per 145.51(d) for DAS projects 85 86 DAS Off-Site Activities Order 8100.12 Procedures manual must contain offsite management procedures to ensure compliance Off-site facility management Off-site personnel and processes Off-site manufacturing Off-site purchasing and receiving FAA Notification Off-Site Facility Management Order 8100.12 Evaluation of the off-site facility by the DAS holder to ensure: Off-site facilities are experienced performing similar alterations on the make/model product Decisions regarding quality and compliance are made without undue influence or pressure Documentation generated by the DAS complies with the procedures manual Procedures for evaluation and required documentation must be identified in the procedures manual 87 88 Off-Site Personnel/Processes Order 8100.12 Off-site facility is responsible for installation and return-to-service Inspection AR must be at the off-site facility during the installation Engineering ARs must document acceptance of all deviations ARs must have access to perform any inspection they deem necessary Off-Site Manufacturing Order 8100.12 Processes, tooling and equipment used at the off-site facility must be Equivalent to those at the DAS authorized facility Appropriate for the alteration Able to produce articles and products conforming to the type design 89 90 18
Off-Site Purchasing/Receiving Order 8100.12 DAS holder must maintain purchasing and inspection system to ensure: The DAS holder maintains configuration control and final design change approvals for all items Off-site facility receives prototype parts and articles only from suppliers approved by the DAS holder Articles obtained from subtier suppliers by the offsite facility are under the same degree of control exercised by the DAS holder Off-Site FAA Notification Order 8100.12 DAS should notify OMT early in the project of planned off-site projects PNL must include additional information Location, ratings, limitations of off-site facility Documentation of their evaluation of the facility A listing of the ARs involved 91 92 Off-Site FAA Coordination Order 8100.12 OMT must coordinate with off-site facility s PMI to ensure facility is capable OMT must consider it s ability to participate in the project or perform oversight DAS must have satisfactory experience on similar projects Off-site airworthiness If performing airworthiness certification functions outside the managing MIDO s geographical area, DAS must submit Form 8130-13, Geographic Expansion Auth MIDO will endorse and coordinate with geographical MIDO 93 94 Foreign Registered/Import DAS Procedures Manual May use foreign registered aircraft for substantiation ACO must coordinate with FCAA DAS must ensure configuration acceptable Need to consider airworthiness certification DAS can t issue May be issued by FCAA FAA may issue Special Flight Authorization Alterations to import products may require coordination with FCAA - Project initiation - FAA notification (PNL) - Development and content of the data package - Production and installation - Special airworthiness certificates - Aircraft ground evaluation - Aircraft pre-flight inspection - Risk Assessment - Aircraft flight evaluation - Aircraft flight manual supplement approval - Issuance of the STC - Issuance of amended standard airworthiness certificate 95 96 19
DOA Eligibility Chapter 5 DOA AUTHORIZATIONS Eligibility Holder of TC, PC Para 5-1. Small airplanes and gliders Turbojet engines<1000 lb Commuter category airplanes Turboprop/Recip<500 HP Normal category rotorcraft Props used on above Qualified staff to support delegated functions 97 98 DOA Eligibility cont. Para 5-1. Authority Make findings leading to TC or PC amendment Issue Airworthiness certificates Airworthiness Approvals Export approvals Experimental certificates Approve major repairs and alterations DOA Limitations Para 5-1. Limitations ACO may impose limitations as necessary Not allowed Interpretations of airworthiness standards Part 34/36 findings Equivalent level of safety findings Special conditions and exemptions 99 100 DOA Responsibilities Service Difficulties Investigate service difficulties identified by FAA Provide information for AD if corrective action is necessary DOA Responsibilities Para 5-1.c. Records 21.293 Type design, specifications, reports, TIR/amendments Data submitted with application for PC Record of rebuilding and alteration For 2 years: Inspection records Record of reported service difficulties 101 102 20
DOA Responsibilities cont. DOA Certification Programs Para 5-1.c. Records Airworthiness certification files Records must be available to FAA and provided if manufacturer no longer operates under DOA DOA type and airworthiness certification processes are essentially the same as FAA certification process TC Procedures in 8110.4 Airworthiness certification procedures in 8130.2 103 104 DOA Program Notification Para 5-2.a. Must provide application and program notification letter (PNL) for new/amended TC Certification plan Conformity plan Major design changes may require PNL Procedures manual must identify criteria FAA Participation Para 5-2.a.(3) OMT will review PNL, determine FAA participation-- Specific Findings Areas the manufacturer does not have certification experience or has not shown satisfactory capability Areas which have experienced service difficulties Areas critical to safety Flight testing of critical characteristics AEG functions Coordinated thru ACO 105 106 Board Meetings Para 5-2.a.(4) Board meetings required for major programs Held per 8110.4 Chaired by DOA administrator Coordinated with FAA Board Meetings Para 5-2.a.(5-7) Compliance/conformity approvals performed by staff ARs Documented as provided in the procedures manual Use FAA forms unless others approved 107 108 21
TC Issuance Para 5-2.a.(10) DOA must submit Statement of compliance with airworthiness regs and 21.21.(b)2 Statement certification data is complete/filed Proposed TCDS Information necessary for operation TC Issuance cont. Para 5-2.a.(10) The ACO may issue or amend the TC after Review of data package Verify specific findings complete Coordination with MIDO and AEG Approve airworthiness limitations 109 110 Airworthiness Certification Para 5-2.a.(8), 5-2(b) Application Form 8130-6 must be submitted for all airworthiness certs issued or amended Signed by registered owner or agent Statement of conformity must be completed for aircraft not produced under PC Airworthiness Certification cont. Para 5-2.a.(8), 5-2(b) Signed by someone other than AR making FAA airworthiness determination Data packages sent to MIDO for processing 111 112 Foreign Registered Aircraft 5-2.a.(11) DOA may use foreign registered aircraft for substantiation of design changes Requires coordination with FCAA Evaluate configuration Flight testing considerations Major Repairs and Alterations DOA may approve data for major alterations and repairs Document compliance on 8100-9 DOA may execute form 337 and return to service Identify authorized persons in procedures manual 113 114 22
DOA Procedures Manual DOA Procedures Manual cont. a. Type Certification Procedures b. Program Notification c. Familiarization Meeting d. Prelim TC Board Meeting e. DOA Cert Plan and Basis f. Coordination of Issue Papers g. Specific Findings h. Compliance determination i. Experimental Air Cert j. TIA k. Certification Tests L. Risk Assessment m. Other TC board meetings n. Certification Flight Testing o. Submittal of AFM, TCDS, Noise and emission data and Airworthiness Limitations p. F&R Testing q. Report preparation, submittal and storage r. Statement of compliance s. Final TC Board meeting t. TC issuance u. ICA v. Standard airworthiness certification w. Post TC activities x. Technical data file y. Production Certification Proc 115 116 SFAR 36 References: Chapter 6 SFAR 36 AUTHORIZATIONS SFAR 36, Amdt. 7 (eff.1/6/99, exp.1/23/04) Order 8000.42A*, Authorization to Develop and Use Major Repair Data Not Specifically Approved by the Administrator (AFS, 3/28/80) AC 140-8*, Guide for Developing and Evaluating an SFAR 36 Engineering Procedures Manual * Cancelled by 8100.9 117 118 MANUFACTURING - ENGINEERING ACO Approves SFAR-36 Procedures Manual Evaluation of SFAR-36 Engineering Staff Manager Co-signs Letter of Authorization Surveillance of Authorization Holder s Engineering Organization ENGINEERING STAFF DEVELOPS Technical Data IAW Procedures Manual and in Compliance with Appl. Airworthiness Requirements Finding of Compliance Shown on 8100-9 Keeps Data on File AIR - FAA - AFS SFAR 36 FSDO Receives Application Package for SFAR-36 Evaluation of Repair Capabilities Manager Co-signs Letter of Authorization Surveillance of Certificate Holder CERTIFICATE HOLDER 121, 135 ( LG Acft ), 145 USES SFAR-36 Developed Data to Perform Major Repair Approve for Return to Service After Performing Major Repair Using that SFAR-36 Data NOT Specifically Approved by FAA ( Contrary to FAR 121.379 (b), 135.437 (b), or 145.51) AUTHORIZATION HOLDER 119 OPERATIONS - MAINTENANCE SFAR 36 Para 6-1a/b. Eligibility: Part 121 or 135 operator of large aircraft, or Domestic Part 145 repair station Authority: May develop data for major repairs, and May approve for return to service after performing major repair using such data not specifically approved by the FAA 120 23
SFAR 36 Authority Para 6-1 b.(3)-(4) Limited to: Those products or articles for which the operating certificate holder is rated to repair under their existing CAMP or GMM (Ops Specs), or Those products or articles for which the repair station is rated (Ops Specs) Data developed may only be used by that SFAR 36 holder SFAR 36 Para 6-1c. Responsibilities: Must investigate unsafe conditions and conditions not conforming to the airworthiness standards and provide information required by SFAR 36, sec. 12. Must maintain records required by SFAR 36, sec. 13, a,b,c. Submit list of repairs accomplished to FSDO quarterly (even if No activity) 121 122 SFAR 36 Requirements Para 6-2.a & b Must have procedures to differentiate between repairs and alterations, and between major and minor repairs Must have an FAA approved procedures manual for the development of major repair data SFAR 36 Requirements Para 6-2.c Substantiation Data documents compliance with the applicable airworthiness requirements Normally the certification basis referenced on the TCDS Data must ensure that the condition of the repaired product meets: All applicable airworthiness requirements Be at least equal to its original or properly altered condition 123 124 SFAR 36 Data Para 6-2.c. Document compliance on Form 8100-9 Sample form in Appendix 1, page 10 SFAR 36 Manual Para 6-3 SFAR 36 Procedures Manual Requirements: Approving and controlling technical data Traceability of repairs Differentiating between major and minor repairs Differentiating between major repairs and minor alterations Determining compatibility of repairs Quarterly report of accomplished repairs Note! These procedures may be in the holder s GMM or IPM. 125 126 24
Chapter 7 DIN Designee Information Database ACO manages information ACOs should begin to correct data inaccuracies in DIN Chapter 8 Termination Procedures allow for notice and appeal by the holder Coordinate termination plans with FAA legal counsel Notice to the holder will indicate reason for proposed termination Appeals must be submitted within 10 days 127 128 Appendix 5-Evaluation Procedures Evaluation team should consist of OMT members supplemented with other resources ACO, MIDO must be represented AFS/AEG personnel should be invited HQ, directorate personnel as needed Evaluation should normally be scheduled for one week Review of representative projects Appendix 5-Evaluation Details Review of the technical compliance findings and airworthiness determination and documentation generated by the organization Opportunity to interact with organization and ARs Document discrepancies Report and follow-up on corrective action Criteria used as a guide, not intended as a checklist 129 130 Appendix 5-Evaluation Procedures Evaluation team should consist of OMT members supplemented with other resources ACO, MIDO must be represented AFS/AEG personnel should be invited HQ, directorate personnel as needed Evaluation should normally be scheduled for one week Review of representative projects 131 25
DDS Evaluation Form We want your candid opinion on the briefing you just completed. Your feedback will help us to provide the best possible products and services. Please respond to the questions below. If you have completed via IVT/ATN, your instructor will prompt you at the end of the broadcast to enter your answers on your keypad. If you have additional comments or you do not have a keypad, you will need to fax this form to the ATN studio at 405 954-0317 or 9507. If you have completed the video option, complete this form manually and return to your training manager. A = Highly Satisfactory B = Satisfactory C = Somewhat Satisfactory D = Not at all Satisfactory E = Not applicable 1. Clarity of objectives A B C D E 2. Clarity of instructions A B C D E 3. Relevance of content to your job A B C D E 4. Effectiveness of presentation of content A B C D E 5. Quality of feedback A B C D E 6. Quality of instructor/student communication A B C D E 7. Overall quality of the course A B C D E When finished, press the next quest key on your keypad and answer YES, then press ENTER. Your responses will be sent electronically. Additional comments: 26