Ceiling for Special applications OWAcoustic Where you depend on it: Premium ceilings for sensitive areas Healthcare Laboratories Food processing, preparation and retail Areas of sustained high humidity Ceilings Information from OWA
OWAcoustic Ceilings for sensitive areas OWAcoustic tiles form the basis of our extensive programme of specialist ceilings. This programme benefits from the normal inherent qualities of the range fire resistance, acoustics, cooling, service integration and sound insulation but also offers more additional features that make them suitable for use in more sensitive areas. OWAcoustic biocide superior appearance, excellent acoustics and more OWAcoustic Bolero biocide and Sinfonia biocide (pages 6 & 7) provide effective resistance against fungi, bacteria and yeast as well as an elegant appearance and excellent sound absorption. LEED > Energy consumption > Disposal of waste > Recycled content > VOC emissions > Light reflectance Health > BLUE ANGEL > Low Emissions (Formaldehyde / VOC s etc.) Manufactured strictly in accordance with regulatory requirements The Environment > 100% recyclable > Manufactured from pure biosoluble mineral wool and natural ingredients > Fungal and bacterial resistance 2
Plain 9 Constellation 3 Hygiene Ceilings OWAcoustic sanitas 02 Developed specifically for sensitive areas where hygiene is important, sanitas 02 provides effective antibacterial and fungicidal resistance to both the decorative and reverse surface of the tile for the life of the ceiling. Hospitals Wards, minor surgical units, consulting rooms etc. Laboratories Sterile and hygienic areas Cleaning The surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp OWA sponge* without loss of the tiles hygiene properties. * (tested to 500 cleaning cycles in accordance with the Gardner test) Disinfection Certificate of Hygiene from the German Association of Hygiene and Microbiology (DGHM) is available on request. Prof. Dr. R. Mutters Institute for Medical Microbiology and Hospital hygiene. Philipps University Marburg A report on the behaviour of Sanitas 02 ceiling tiles when subjected to microbiological contamination is available on request. Emissions OWA mineral wool tiles are low emission building materials and have achieved the German environmental Blue Angel classification confirming that they are manufactured from harmless raw materials (certified by RAL GmbH, Sankt Augustin). 625 x 625 1200 x 600 1250 x 625 S 3 S 3a Reaction to fire A2-s1,d0 (EN 13501-1) White Light reflection approx. 91 (ISO 7724-2, ISO 7724-3), (Plain 9) Sound insulation* 35 db 49 db (Plain 9) 31 db 49 db (Constellation 3) Sound absorption α w = 0.15 / NRC = 0.15 (Plain 9) α w = 0.70 / NRC = 0.70 (Constellation 3) Up to 95 % RH 3
Hygiene Ceilings OWAcoustic pura Where disinfection may be required Designed to withstand disinfection and repeated cleaning (tested to 500 cleaning cycles in accordance with the Gardner test) pura provides a cost effective solution for hygiene sensitive areas. Hospitals Wards, corridors and general areas. Schools Fitness studios Care homes Nurseries Cleaning The surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp OWA sponge (see Installation Guide No. 801 E). Emissions OWA mineral wool tiles are low emission building materials and have achieved the German environmental Blue Angel classification confirming that they are manufactured from harmless raw materials (certified by RAL GmbH, Sankt Augustin). 625 x 625 1200 x 600 1250 x 625 S 3 S 3a Plain 9 Disinfection Certificate of Hygiene from the German Association of Hygiene and Microbiology (DGHM) is available on request is available. Constellation 3 Prof. Dr. R. Mutters Institute for Medical Microbiology and Hospital hygiene. Philipps University Marburg Reaction to fire A2-s1,d0 (EN 13501-1) White Light reflection approx. 91 (ISO 7724-2, ISO 7724-3), (Plain 9) Sound insulation* 35 db 49 db (Plain 9) 31 db 49 db (Constellation 3) Sound absorption α w = 0.15 / NRC = 0.15 (Plain 9) α w = 0.70 / NRC = 0.70 (Constellation 3) Up to 95 % RH 4
Hygiene Ceilings OWAlux For project that require smooth, clean surfaces OWAlux ceiling tiles are suitable for areas that require the highest standards of cleanliness and hygiene. The smooth, white aluminium foil allows easy cleaning and/or disinfection of the tile surface. Temperature range Up to a maximum of 50 C at ceiling level Surface Bio-resistance A report by the Dr Wessling Laboratory in Altenberge is available confirming the effectiveness of surface disinfection (only OWAlux white 64/8). Typical Construction for high pressure washing OWAlux grey white 64/2/O OWAlux silver 64/4/O OWAlux white 64/8 Hospitals Laboratories/Clean rooms Food processing and food retail outlets Sterile and hygiene areas High humidity areas Normal Cleaning When simply installed the surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp OWA sponge (see Installation Guide No. 801 E). High pressure cleaning Where high pressure washing may be required only OWAlux 64/8 should be used and then the tiles must be sealed into the grid using a compression strip and joint sealant (as shown in the adjacent diagram) to prevent ingress of moisture and contaminants during the cleaning process. The spray should be applied at an angle of 30 with a minimum distance of 40 cm from the surface of the ceiling and a maximum nozzle pressure of 40 bar. During high pressure cleaning the water temperature should not exceed 38 C. System S 3 1 Hold down clip No. 819 1 2 Main or cross tees 2 (No s 45, 46 or 47) 3 Compression strip 4 3 5 625 x 625 1200 x 600 1250 x 625 S 3 S 15* 4 Sealant 5 Non perforated surface designs * not suitable for all installations Reaction to fire A2-s1,d0 (EN 13501-1) 64/8 is A2-s3,d0 White, grey white and silver Light reflection details on request Sound insulation* 35 db 49 db Sound absorption α w = 0.15 / NRC = 0.15 Up to 95 % RH 5
OWAcoustic NEW Hygiene Ceilings OWAcoustic biocide Sinfonia and Bolero The perfect high performance all-rounder now with micro-biocide properties Tested to standard JIS-Norm Z 2801:2000 Bolero biocide With proven resistance to bacterial, fungal and yeast growth, OWAcoustic biocide Bolero (fine textured surface) and OWAcoustic biocide Sinfonia (plain smooth surface) can also provide high levels of acoustic performance, fire resistance and aesthetic appeal. Hospitals Nursing homes Laboratories Clinics Food industry Emissions Can be safely used in residential applications (report available on request). 625 x 625 1200 x 600 1250 x 625 S 3 S 15 Sinfonia biocide Reaction to fire A2-s1,d0 (EN 13501-1) White Light reflection approx. 84 (Bolero), approx. 87 (Sinfonia) (ISO 7724-2, ISO 7724-3) Sound insulation* 33 db Sound absorption α w = 0.85 / NRC = 0.85 Up to 95 % RH Fire resistance* Up to REI 120 (EN 13501-2) 6
7
grey white OWAcoustic clean OWAcoustic clean 64/12 silver 64/14 64/18 OWAcoustic clean white Cleanroom Ceilings OWAcoustic clean Where cleanliness counts The international standard EN ISO 14644-1 provides 9 classes of cleanroom air quality. These classifications are dependent on the number and size of airborne particles present in a specified volume of air. In sensitive manufacturing or laboratory areas the compliance with these exacting standards can be critical and may be the difference between success and failure. The OWAcoustic clean ceiling range can satisfy 6 of the standard s classifications (classes 4-9). The high quality foil face provides OWAcoustic clean tiles with a smooth easy to clean closed surface. Universal 64/1 also achieves cleanroom status and has a fine perforated surface that provides good levels of sound absorption. Precision Engineering Optical manufacturing Hi tech electronic component manufacturing Cleaning The type of cleaning regime is dependent on tile and construction used. Non-perforated OWAcoustic clean tiles can be vacuum cleaned using a soft brush attachment and/or wiped with a damp sponge. Tested: Suitable for use in cleanrooms To establish the suitability of OWAcoustic clean room ceilings, they were subjected to prolonged tests in accordance with EN ISO 14644-1 at the Fraunhofer IPA, Stuttgart. The Class 4 performance recorded can be compared with the Class 10 performance shown in the former US-Federal standard 209E. This Class allowed a maximum of 10 particles of size 0.5 μm per cubic foot of air. Typical Construction System S 3 1 Hold down clip No. 819 1 2 Main or cross tees 2 (No s 45, 46 or 47) 3 Compression strip 4 3 5 625 x 625 4 Sealant 5 Non perforated surface designs Further information can be found in brochure 895 E. S 3 OWAcoustic clean Universal 65/1 Reaction to fire A2-s1,d0 (EN 13501-1) 64/18 is A2-s3,d0 White, grey white, silver Light reflection details available on request Sound insulation* 35 db 49 db (64/12, 64/14, 64/18) 31 db 49 db (Universal 65/1) Sound absorption α w = 0.15 / NRC = 0.15 (64/12, 64/14, 64/18) α w = 0.50 / NRC = 0.55 (Universal 65/1) Up to 95 % RH 8
Hygiene Ceilings OWAcoustic AirControl Improving the quality of life OWAcoustic AirControl can reduce air pollutant by over 50% Innovation by OWA OWAcoustic AirControl has been designed to help combat everyday smells such as food, cigarette smoke and perspiration. It also reduces the airborne levels of common cleaning material solvents and harmful substances such as ammonia, formaldehyde, triethylamine and nicotine. Certified performance Tested by the Danish institute Eurofins, OWAcoustic AirControl ceiling tiles were subjected to continuous exposure of nicotine, ammonia, formaldehyde and triethylamine. The result of the 14 day test programme was a reduction of over 50% of the respective concentrations, leading to a dramatic improvement in the air quality. μg / m³ 150 100 50 Pollutant concentration without active ceiling Pollutant concentration with OWAcoustic AirControl ceiling tile The result When used in places such as hospitals, care homes, clinics or veterinary practices its long lasting effect can significantly improve the air quality and produce a more relaxed, less institutional feel to the environment. This in turn can assist in quicker recovery times for patients and a more pleasant ambiance for care home clients. Restaurants, hotels, nurseries, gyms and offices can also benefit from the properties of OWAcoustic AirControl. 0 Nicotine Ammonia Formaldehyde Triethylamine Constellation 3 625 x 625 S 3 S 15 Reaction to fire A2-s1,d0 (EN 13501-1) White Light reflection approx. 88 (ISO 7724-2, ISO 7724-3) Sound insulation* from 31 db to 49 db Sound absorption α w = 0.70 / NRC = 0.70 Up to 95 % RH 9
Moisture resistant ceilings OWAcoustic Mavroc Where high humidity performance is a necessity In areas such as swimming pools, changing rooms and shower areas, suspended ceilings can be exposed to high levels of humidity. Relative humidity (RH) is expressed as a percentage the amount of water air can hold at the prevailing temperature within the room. In areas of high humidity it is important to install the correct OWAcoustic ceiling tiles. Constellation 3 Harmony 72 OWAcoustic Mavroc has been developed for use in external areas and internal areas where the ceilings maybe subject to long term exposure of up to 95% Relative Humidity. Showers and Saunas Swimming pools Changing rooms External areas Suspension System Where the ceiling is subject to extreme levels of humidity it is recommended that OWAconstruct corrosion resistant suspension system S 3e is used. Cleaning The surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp OWA sponge (see Installation Guide No. 801 E). Emissions OWA mineral wool tiles are low emission building materials and have achieved the German environmental Blue Angel classification confirming that they are manufactured from harmless raw materials (certified by RAL GmbH, Sankt Augustin). 625 x 625 S 3* S 3e S 15* * not suitable for all installations Other surfaces on request. Reaction to fire A2-s1,d0 (EN 13501-1) White Light reflection approx. 86 88 (ISO 7724-2, ISO 7724-3) dependent on surface design Sound insulation* 31 db 49 db (dependent on surface) Sound absorption α w = 0.70 / NRC = 0.70 (Constellation 3) α w = 0.75 / NRC = 0.75 (Harmony 72) Up to 95 % RH, permanent 10
Moisture resistant ceilings OWAcoustic AquaCosmos Where high humidity performance is a requirement In areas such as swimming pools, changing rooms and shower areas, suspended ceilings can be exposed to high levels of humidity. Relative humidity (RH) is expressed as a percentage and is dependent on the room temperature. In areas of high humidity it is important to install the correct OWAcoustic ceiling tiles. Cleaning The surface of the tile can be vacuum cleaned using a soft brush attachment and / or cleaned with a damp OWA sponge (see Installation Guide No. 801 E). Emissions OWA mineral wool tiles are low emission building materials and have achieved the German environmental Blue Angel classification confirming that they are manufactured from harmless raw materials (certified by RAL GmbH, Sankt Augustin). AquaCosmos 68/O OWAcoustic Aquacosmos has a high level of humidity resistance and can be used externally and in other humid areas where the ceilings maybe subject to exposure of up to 100% Relative Humidity. Showers and Saunas Swimming pools Changing rooms External areas Suspension System Where the ceiling is subject to extreme levels of humidity it is recommended that OWAconstruct corrosion resistant suspension system S 3e is used. 625 x 625 S 3* S 3e S 15* Further information can be found in brochure 894 E. * not suitable for all installations AquaCosmos 68/N Reaction to fire A2-s1,d0 (EN 13501-1) White Light reflection approx. 84 (ISO 7724-2, ISO 7724-3) Sound insulation* 35 db 49 db (un-neddled) 31 db 49 db (needled) Sound absorption α w = 0.25 / NRC = 0.25 (un-needled) α w = 0.55 / NRC = 0.55 (needled) remain stable to 100 % RH 11
Technical Advice This publication provides an overview of OWAcoustic solutions for sensitive areas. For more information please contact our OWAconsult technical support team. They are able to provide advice and guidance on a wide range of ceiling topics such as acoustics, fire resistance, specification writing, and installation and can assist from concept to completion of the project. OWAconsult Team Telefon: +49 9373 2 01-2 22 Telefax: +49 9373 2 01-1 11 E-Mail: info@owaconsult.de Internet: www.owaconsult.com Product Warranties The information provided in this leaflet is based on the standards and data available at the time of publication. Any performance, warranties or guarantees provided, express or implied, are subject to the exclusive use of OWA components and the installation of those components in accordance with our recommendations. Failure to adhere to these conditions will result in the invalidation of any performance claims, warranties or guarantees and rejection of any liability. OWA reserves the right to make any technical improvements in the products, systems or services without prior notice. All goods and services are supplied in accordance with our current Terms and Conditions of Sale. Errors and omissions excluded. This supersedes and replaces all earlier editions of brochure 898 E. Odenwald Faserplattenwerk GmbH Dr.-F.- A.-Freundt-Straße 3 63916 Amorbach Tel.: +49 9373 2 01-0 Fax: +49 9373 2 01-1 30 www.owa.de E-Mail: info@owa.de OWA (UK) Ltd. Unit 10, Perth Trading Estate Perth Avenue, Slough SL1 4XX Tel.: +44 1753 55 24 89 Fax: +44 1753 52 60 60 www.owa-ceilings.co.uk E-Mail: sales@owa-ceilings.co.uk Brochure 898/E 021302