Ácido Úrico Uricasa POD. CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME URI SAMPLE RMAL 5.00 REPORT NAME URICO LOW 10.00 HIGH 2.50 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 2.50000 TO 7.50000 TEST NAME URI TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST URICO REAGENT NAME URI LINEARITY (C) 0.00000 TO 10.00000 LOT ID * INITIAL Ad. 0.300 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 180 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 516 / 660 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 25.0 mg/dl de Ácido Úrico.
Uric acid Uricase POD. Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME URI SAMPLE RMAL 5.00 REPORT NAME URIC LOW 10.00 HIGH 2.50 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 2.50000 TO 7.50000 TEST NAME URI TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST URIC REAGENT NAME URI LINEARITY (C) 0.00000 TO 10.00000 LOT ID * INITIAL Ad..300 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 180 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 516 / 660 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 25.0 mg/dl of Uric Acid.
Albúmina Verde bromocresol. PREPARACIÓN Y ESTABILIDAD El reactivo esta listo para su uso. Estable hasta su fecha de caducidad. Proteger de la luz. CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME ALB SAMPLE RMAL 1.25 REPORT NAME ALBUMINA LOW 2.50 HIGH 1.25 TEST NUMBER UNITS PRIM G/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 3.50000 TO 5.00000 TEST NAME ALB TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST ALBUMINA REAGENT NAME ALB LINEARITY (C) 0.50000 TO 6.00000 LOT ID * INITIAL Ad..500 ABS LIMIT (Ad) 2.50 REAGENT VOL (ul) RM 236 REAGNET BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 310 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 420 MIX TIME (SEC) 1.00 636 / 500 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 6.0 g/dl de Albúmina.
Albumin Bromocresol green. PREPARATION AND STABILITY The reagent is ready to be used. This solution is stable at 2-8ºC up to the date of expiration specified. Avoid direct sunlight. Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME ALB SAMPLE RMAL 1.25 REPORT NAME ALBUMIN LOW 2.50 HIGH 1.25 TEST NUMBER UNITS PRIM G/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 3.50000 TO 5.00000 TEST NAME ALB TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST ALBUMIN REAGENT NAME ALB LINEARITY (C) 0.50000 TO 6.00000 LOT ID * INITIAL Ad..500 ABS LIMIT (Ad) 2.50 REAGENT VOL (ul) RM 236 REAGNET BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 310 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 420 MIX TIME (SEC) 1.00 636 / 500 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 6.0 g/dl of Albumin.
Fosfatasa Alcalina DGKC CALIBRACIÓN Calibración frente a factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME ALP SAMPLE RMAL 5.00 REPORT NAME FOSFATASA ALCALINA LOW 25.00 HIGH 2.50 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 98.0000 TO 279.000 TEST NAME ALP TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST FOSFATASA ALCALINA REAGENT NAME ALP LINEARITY (C) 5 TO 750 LOT ID * INITIAL Ad. 0.800 0 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 412 / 484 A 1.00 18.8.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 750 U/L de Fosfatasa Alcalina.
Alkaline Phosphatase DGKC Calibration with a factor. Introduce the following data in the computer : ENTRY NAME ALP SAMPLE RMAL 5.00 REPORT NAME ALKALINE PHOSPHATASE LOW 25.00 HIGH 2.50 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 98.0000 TO 279.000 TEST NAME ALP TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST ALKALINE PHOSPHATASE REAGENT NAME ALP LINEARITY (C) 5 TO 750 LOT ID * INITIAL Ad. 0.800 0 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 412 / 484 A 1.00 18.8.000.000 LINEARITY This method is linear up to 1200 U/L of Alkaline phosphatase.
α-amilasa CNP-G 3 CALIBRACIÓN Calibración frente a factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME AMI SAMPLE RMAL 5.00 REPORT NAME AMILASA LOW 15.00 HIGH 3.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 90.00000 TEST NAME AMI TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST AMILASA REAGENT NAME AMI LINEARITY (C) 1.50000 TO 2000.0000 LOT ID * INITIAL Ad. 1.000 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 404 / 660 A 1.00 8.00.000.000 LINEALIDAD La técnica es lineal al menos hasta 2000 U/L de Amilasa.
α-amylase CNP-G 3 Calibration with a factor. Introduce the following data in the computer : ENTRY NAME AMI SAMPLE RMAL 5.00 REPORT NAME AMYLASE LOW 15.00 HIGH 3.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 90.00000 TEST NAME AMI TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST AMYLASE REAGENT NAME AMI LINEARITY (C) 1.50000 TO 1200.0000 LOT ID * INITIAL Ad. 1.000 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 404 / 6060 A 1.00 8.00.000.000 LINEARITY This method is linear up to 1000 U/L of Amylase.
Bilirrubina (Total y Directa) DMSO CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ** Introducir el valor asignado al calibrador LINEALIDAD ENTRY NAME BIL SAMPLE RMAL 25.0 REPORT NAME BILIRRUBINA LOW 25.00 HIGH 10.0 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 1.00000 REAGENT BLANK TEST NAME BIL TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR SPINTROL --------- 1 REAGENT NUMBER 1 FOR TEST BILIRRUBINA REAGENT NAME BIL LINEARITY (C) 0.00000 TO 25.00000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 AUX REAG DISP (SEC) 180.0 CORRECTION LIMIT 0.00000 548 / 000 A 1.00.000.000.000 REAGENT NUMBER 2 FOR TEST BILIRRUBINA REAGENT NAME BIL LINEARITY (C) 0.00000 TO 25.00000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 5 LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 AUX REAG DISP (SEC) 0.0 CORRECTION LIMIT 0.00000 548 / 000 A 1.00.000.000.000 La técnica es lineal al menos hasta 20 mg/dl de Bilirubina.
Bilirubin (Total and Direct) DMSO Use a human serum calibrator Introduce the following data in the computer : LINEARITY ** Assign the values of controls and calibrator. This method is linear up to 20 mg/dl of Bilirubin. ENTRY NAME BIL SAMPLE RMAL 25.0 REPORT NAME BILIRUBIN LOW 25.00 HIGH 10.0 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 1.00000 REAGENT BLANK TEST NAME BIL TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST BILIRUBIN REAGENT NAME BIL LINEARITY (C) 0.00000 TO 25.00000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 AUX REAG DISP (SEC) 180.0 CORRECTION LIMIT 0.00000 548 / 000 A 1.00.000.000.000 REAGENT NUMBER 2 FOR TEST BILIRUBIN REAGENT NAME BIL LINEARITY (C) 0.00000 TO 25.00000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 5 LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00
Calcio o-cresolftaleina PREPARACIÓN Y ESTABILIDAD Mezclar proporcionalmente 1:1 los reactivos 1 y 2. Este monoreactivo es estable 2 dias a 2-8ºC. CALIBRACIÓN Utilizar un suero de calibración adecuado. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME CA SAMPLE RMAL 2.50 REPORT NAME CALCIO LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC MMOL/L TEST TYPE CALIBRATED SEC. UNITS FACTOR 0.2500 MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 9.00000 TO 11.00000 TEST NAME CA TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST CALCIO REAGENT NAME CA LINEARITY (C) 2.00000 TO 16.0000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 2 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 3 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 572 / 660 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 16 mg/dl de Calcio.
Calcium o-cresolphtalein PREPARATION AND STABILITY Mix proportionally 1:1 both reagents. The working reagent is stable 2 days at 2-8ºC. Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME CA SAMPLE RMAL 2.50 REPORT NAME CALCIUM LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC MMOL/L TEST TYPE CALIBRATED SEC. UNITS FACTOR 0.2500 MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 9.00000 TO 11.00000 TEST NAME CA TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST CALCIUM REAGENT NAME CA LINEARITY (C) 2.00000 TO 16.0000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 2 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 3 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 PRIM / SEC USE IN CONST E.F. LOW 572 / 660 A 1.00.000 HIGH ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 16 mg/dl of Calcium.
Cloruros Tiocianato CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME CL SAMPLE RMAL 2.50 REPORT NAME CLORUROS LOW 3.25 HIGH 2.25 TEST NUMBER UNITS PRIM meq/l SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 98 TO 107 TEST NAME CL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST CLORUROS REAGENT NAME CL LINEARITY (C) 0 TO 130 LOT ID * INITIAL Ad. 0.400 0 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 484 / 604 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 130 meq/l de Cloruros.
Chloride Thiocyanate Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME CL SAMPLE RMAL 2.50 REPORT NAME CHLORIDE LOW 3.25 HIGH 2.25 TEST NUMBER UNITS PRIM meq/l SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 98 TO 107 TEST NAME CL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST CHLORIDE REAGENT NAME CL LINEARITY (C) 0 TO 130 LOT ID * INITIAL Ad. 0.400 0 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 484 / 604 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 130 meq/l of Chloride.
Colesterol CE-CO-POD CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME COL SAMPLE RMAL 2.50 REPORT NAME COLESTEROL LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 120.00000 TO 250.0000 TEST NAME COL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR CAL-HDL ** 1 REAGENT NUMBER 1 FOR TEST COLESTEROL REAGENT NAME COL LINEARITY (C) 0.00000 TO 800.0000 LOT ID * INITIAL Ad..200 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 516 / 600 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 800 mg/dl de Colesterol.
Cholesterol CE-CO-POD Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME CHOL SAMPLE RMAL 2.50 REPORT NAME CHOLESTEROL LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 120.00000 TO 250.0000 TEST NAME CHOL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR CAL-HDL ** 1 REAGENT NUMBER 1 FOR TEST CHOLESTEROL REAGENT NAME CHOL LINEARITY (C) 0.00000 TO 800.0000 LOT ID * INITIAL Ad..200 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 516 / 600 A 1.00.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 800 mg/dl of Cholesterol.
CK-MB Inmunoinhibición CALIBRACIÓN Calibración frente a factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME CK SAMPLE RMAL 5.00 REPORT NAME CK-MB LOW 15.00 HIGH 3.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 24.00000 TO 195.00000 TEST NAME CK TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST CK-MBC REAGENT NAME CK LINEARITY (C) 5.0000 TO 1000.0000 LOT ID * INITIAL Ad. 0.500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 180 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 ** Introducir el valor asignado al calibrador
CK-MB Immunoinhibition Calibration in front of a factor. Introduce the following data in the computer : ENTRY NAME CK SAMPLE RMAL 5.00 REPORT NAME CK-MB LOW 15.00 HIGH 3.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 24.00000 TO 195.00000 TEST NAME CK TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST CK-MB REAGENT NAME CK LINEARITY (C) 5.0000 TO 1000.0000 LOT ID * INITIAL Ad. 0.500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 180 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 * Assign the values of controls and calibrator.
CK-NAC IFCC CALIBRACIÓN Calibración frente a factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME CK SAMPLE RMAL 5.00 REPORT NAME CK-NAC LOW 15.00 HIGH 3.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 24.00000 TO 195.00000 TEST NAME CK TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST CK-NAC REAGENT NAME CK LINEARITY (C) 5.0000 TO 1000.0000 LOT ID * INITIAL Ad. 0.500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 180 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 LINEALIDAD La técnica es lineal al menos hasta 1000 U/L de CK.
CK-NAC IFCC Calibration with a factor. Introduce the following data in the computer : ENTRY NAME CK SAMPLE RMAL 5.00 REPORT NAME CK-NAC LOW 15.00 HIGH 3.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 24.00000 TO 195.00000 TEST NAME CK TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST CK-NAC REAGENT NAME CK LINEARITY (C) 5.0000 TO 1000.0000 LOT ID * INITIAL Ad. 0.500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 180 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 1000 U/L of CK.
Creatinina Jaffé PREPARACIÓN Y ESTABILIDAD Mezclar ambos reactivos a partes iguales según necesidades. Esta mezcla es estable 10 días a temperatura ambiente. CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME CRE SAMPLE RMAL 20.00 REPORT NAME CREATININA LOW 10.00 HIGH 15.00 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 0.70000 TO 1.40000 TEST NAME CRE TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST CREATININA REAGENT NAME CRE LINEARITY (C) 0.20000 TO 15.0000 LOT ID * INITIAL Ad. 0.600 0 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 30 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES 484 / 604 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 15 mg/dl de Creatinina.
Creatinine Jaffé PREPARATION AND STABILITY Mix proportionally 1:1 both reagents. This working reagent is stable 10 days at room temperature. Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME CRE SAMPLE RMAL 20.00 REPORT NAME CREATININE LOW 10.00 HIGH 15.00 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 0.70000 TO 1.40000 TEST NAME CRE TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST CREATININE REAGENT NAME CRE LINEARITY (C) 0.20000 TO 15.0000 LOT ID * INITIAL Ad. 0.600 0 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 30 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES 484 / 604 A 1.00.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 15 mg/dl of Creatinine.
Hierro Ferrozine CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME FE SAMPLE RMAL 25.0 REPORT NAME HIERRO LOW 25.0 HIGH 10.0 TEST NUMBER UNITS PRIM ug/dl SEC - - MATH LIN REG END PT. PRINT DIGITS 0 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 37.0000 TO 156.000 REAGENT 1 BLANK TEST NAME FE TEST TYPE CALIBRATED. INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST HIERRO REAGENT NAME FE LINEARITY (C) 10.000 TO 1000.000 LOT ID * INITIAL Ad. 0.500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 AUX REAG DISP (SEC) 180.0 CORRECTION LIMIT 0.00000 564 / 660 A 1.00.000.000.000 REAGENT NUMBER 2 FOR TEST HIERRO REAGENT NAME FE LINEARITY (C) 10.000 TO 1000.000 LOT ID * INITIAL Ad. 0.500 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 5 REAGENT BLANK LOW 5 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 AUX REAG DISP (SEC) 0.0 CORRECTION LIMIT 0.00000 564 / 660 A 1.00.000.000
Iron Ferrozine Use a human serum calibrator Introduce the following data in the computer : ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 700 µg/dl of Iron. ENTRY NAME FE SAMPLE RMAL 25.0 REPORT NAME IRON LOW 25.0 HIGH 10.0 TEST NUMBER UNITS PRIM ug/dl SEC - - MATH LIN REG END PT. PRINT DIGITS 0 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 37.0000 TO 156.000 REAGENT 1 BLANK TEST NAME FE TEST TYPE CALIBRATED. INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST IRON REAGENT NAME FE LINEARITY (C) 10.000 TO 1000.000 LOT ID * INITIAL Ad. 0.500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 AUX REAG DISP (SEC) 180.0 CORRECTION LIMIT 0.00000 564 / 660 A 1.00.000.000.000 REAGENT NUMBER 2 FOR TEST IRON REAGENT NAME FE LINEARITY (C) 10.000 TO 1000.000 LOT ID * INITIAL Ad. 0.500 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 5 REAGENT BLANK LOW 5 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 AUX REAG DISP (SEC) 0.0 CORRECTION LIMIT 0.00000 564 / 660 A 1.00.000.000
γ-gt IFCC CALIBRACIÓN Calibración frente a un Factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME GGT SAMPLE RMAL 20.00 REPORT NAME GAMMA-GT LOW 25.00 HIGH 5.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 5.00000 TO 50.0000 TEST NAME GGT TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST GAMMA-GT REAGENT NAME GGT LINEARITY (C) 5.0000 TO 300.0000 LOT ID * INITIAL Ad. 0.600 ABS LIMIT (Ad) 2.200 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 404 / 660 A 1.00 9.2.000.000 LINEALIDAD La técnica es lineal al menos hasta 400 U/L de γ-gt.
γ-gt IFCC Calibration in front of a Factor. Introduce the following data in the computer : ENTRY NAME GGT SAMPLE RMAL 20.00 REPORT NAME GAMMA-GT LOW 25.00 HIGH 5.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 5.00000 TO 50.0000 TEST NAME GGT TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -1000.00 TO 1000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST GAMMA-GT REAGENT NAME GGT LINEARITY (C) 5.0000 TO 300.0000 LOT ID * INITIAL Ad. 0.600 ABS LIMIT (Ad) 2.200 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 404 / 660 A 1.00 9.2.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 400 U/L of γ-gt.
Glucosa GOD-POD CALIBRACIÓN Utilizar un suero de calibración adecuado. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME GLU SAMPLE RMAL 2.50 REPORT NAME GLUCOSA LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT. PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 60.0000 TO 110.000 TEST NAME GLU TEST TYPE CALIBRATED. INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST GLUCOSA REAGENT NAME GLU LINEARITY (C) 50.000 TO 500.000 LOT ID * INITIAL Ad. 0.500 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 420 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 420 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 500 / 660 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 500 mg/dl de Glucosa.
Glucose GOD-POD Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME GLU SAMPLE RMAL 2.50 REPORT NAME GLUCOSE LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT. PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 60.0000 TO 110.000 TEST NAME GLU TEST TYPE CALIBRATED. INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST GLUCOSE REAGENT NAME GLU LINEARITY (C) 50.000 TO 500.000 LOT ID * INITIAL Ad. 0.500 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 420 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 420 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 500 / 660 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 500 mg/dl of Glucose.
GOT / AST IFCC CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME GOT SAMPLE RMAL 20.00 REPORT NAME GOT LOW 25.00 HIGH 5.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 DOWN TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 40.0000 TEST NAME GOT TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST GOT REAGENT NAME GOT LINEARITY (C) 5.0000 TO 500.0000 LOT ID * INITIAL Ad. 0.800 ABS LIMIT (Ad) 0.360 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 450 U/L de GOT.
GOT / AST IFCC Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME GOT SAMPLE RMAL 20.00 REPORT NAME GOT LOW 25.00 HIGH 5.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 DOWN TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 40.0000 TEST NAME GOT TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST GOT REAGENT NAME GOT LINEARITY (C) 5.0000 TO 500.0000 LOT ID * INITIAL Ad. 0.800 ABS LIMIT (Ad) 0.360 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 450 U/L of GOT.
GPT/ALT IFCC optimizada CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME GPT SAMPLE RMAL 20.00 REPORT NAME GPT LOW 25.00 HIGH 5.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 DOWN TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 40.0000 TEST NAME GPT TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST GPT REAGENT NAME GPT LINEARITY (C) 5.0000 TO 500.0000 LOT ID * INITIAL Ad. 0.800 ABS LIMIT (Ad) 0.360 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 450 U/L de GPT/ALT.
GPT/ALT IFCC Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME GPT SAMPLE RMAL 20.00 REPORT NAME GPT LOW 25.00 HIGH 5.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 DOWN TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 40.0000 TEST NAME GPT TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST GPT REAGENT NAME GPT LINEARITY (C) 5.0000 TO 500.0000 LOT ID * INITIAL Ad. 0.800 ABS LIMIT (Ad) 0.360 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 450 U/L of GPT/ALT.
HDL colesterol Directo CALIBRACIÓN Utilizar un suero de calibración específico incluido en el kit. El calibrador, una vez reconstituido, es estable una semana a 2-8 ºC o bien 5 semanas a 20 ºC. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME HDL SAMPLE RMAL 3.00 REPORT NAME HDL COLESTEROL LOW 6.00 HIGH 1.00 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 35.00000 TO 65.0000 TEST NAME HDL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR CAL-HDL ** 1 REAGENT NUMBER 1 FOR TEST HDL COLESTEROL REAGENT NAME HDL LINEARITY (C) 0.50000 TO 200.0000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 AUX REAG DISP (SEC) 270 CORRECTION LIMIT 0.00000 548 / 660 A 1.00.000.000 REAGENT NUMBER 2 FOR TEST HDL CHOLESTEROL REAGENT NAME HDL LINEARITY (C) 0.50000 TO 200.0000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 75 REAGENT BLANK LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 548 / 660 A 1.00.000.000 LINEALIDAD La técnica es lineal al menos hasta 200 mg/dl de HDL Colesterol.
HDL cholesterol Direct Use the specific serum included in the kit. The calibrator once reconstituted is stable one week at 2-8ºC or 5 weeks at 20ºC. Introduce the following data in the computer: ENTRY NAME HDL SAMPLE RMAL 3.00 REPORT NAME HDL CHOLESTEROL LOW 6.00 HIGH 1.00 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 35.00000 TO 65.0000 TEST NAME HDL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR CAL-HDL ** 1 REAGENT NUMBER 1 FOR TEST HDL COLESTEROL REAGENT NAME HDL LINEARITY (C) 0.50000 TO 200.0000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 AUX REAG DISP (SEC) 270 CORRECTION LIMIT 0.00000 548 / 660 A 1.00.000.000 REAGENT NUMBER 2 FOR TEST HDL CHOLESTEROL REAGENT NAME HDL LINEARITY (C) 0.50000 TO 200.0000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 75 REAGENT BLANK LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 548 / 660 A 1.00.000.000 LINEARITY This method is linear up to 200 mg/dl of HDL Cholesterol.
Lactato Trinder CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME LAC SAMPLE RMAL 2.50 REPORT NAME LACTATO LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 9.00000 TO 16.0000 TEST NAME LAC TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST LACTATO REAGENT NAME LAC LINEARITY (C) 0.00000 TO 150.0000 LOT ID * INITIAL Ad. 0.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 500 / 660 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 150 mg/dl de Lactato.
Lactate Trinder Use a human serum calibrator Introduce the following data in the computer : * Assign the values of controls and calibrator. LINEARITY This method is linear up to 150 mg/dl of Lactate. ENTRY NAME LAC SAMPLE RMAL 2.50 REPORT NAME LACTATE LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 9.00000 TO 16.0000 TEST NAME LAC TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST LACTATE REAGENT NAME LAC LINEARITY (C) 0.00000 TO 150.0000 LOT ID * INITIAL Ad. 0.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 500 / 660 A 1.00.000.000
LDH DGKC CALIBRACIÓN Calibración frente a factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME LDH SAMPLE RMAL 4.00 REPORT NAME LDH LOW 10.00 HIGH 2.50 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 DOWN TEMPERATURE (C) 37 RMAL (C) 230 TO 460 TEST NAME LDH TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST LDH REAGENT NAME LDH LINEARITY (C) 15.0000 TO 1500.0000 LOT ID * INITIAL Ad. 0.800 ABS LIMIT (Ad) 0.360 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 LINEALIDAD La técnica es lineal al menos hasta 1500 U/L de LDH.
LDH DGKC Calibration with a factor. Introduce the following data in the computer : ENTRY NAME LDH SAMPLE RMAL 4.00 REPORT NAME LDH LOW 10.00 HIGH 2.50 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 DOWN TEMPERATURE (C) 37 RMAL (C) 230 TO 460 TEST NAME LDH TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST LDH REAGENT NAME LDH LINEARITY (C) 15.0000 TO 1500.0000 LOT ID * INITIAL Ad. 0.800 ABS LIMIT (Ad) 0.360 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 120 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 NUMBER OF READS 3 COOLING YES 340 / 380 A 1.00 5.47.000.000 LINEARITY This method is linear up to 1500 U/L of LDH.
LDL cholesterol Direct Use the specific serum included in the kit. The calibrator once reconstituted is stable one week at 2-8ºC or 5 weeks at 20ºC. Introduce the following data in the computer: ENTRY NAME LDL SAMPLE RMAL 4.00 REPORT NAME LDL CHOLESTEROL LOW 6.00 HIGH 1.00 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 49.0000 TO 172.000 TEST NAME HDL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR CAL-HDL ** 1 REAGENT NUMBER 1 FOR TEST LDL COLESTEROL REAGENT NAME LDL LINEARITY (C) 1.00000 TO 1000.000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 AUX REAG DISP (SEC) 270 CORRECTION LIMIT 0.00000 548 / 660 A 1.00.000.000 REAGENT NUMBER 2 FOR TEST LDL CHOLESTEROL REAGENT NAME LDL LINEARITY (C) 1.00000 TO 1000.000 LOT ID * INITIAL Ad..500 REAGENT VOL (ul) RM 75 REAGENT BLANK LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 240 MIX TIME (SEC) 1.00 548 / 660 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 1000 mg/dl of LDL Cholesterol.
Lipasa Colorimétrico CALIBRACIÓN Standard: reconstituir el vial con 1 ml de agua bidestilada. La estabilidad es de 10 días a 2-8ºC ó 3 meses congelado a 20ºC. Se recomienda congelar partes alícuotas. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME LIP SAMPLE RMAL 3.00 REPORT NAME LIPASA LOW 6.00 HIGH 1.00 TEST NUMBER UNITS PRIM U/L SEC - - TEST TYPE RATE SEC. UNITS FACTOR 0.00000 MATH CAL LIN RATE PRINT DIGITS 1 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 30.0000 TEST NAME LIP TEST TYPE CALIBRATED COMB TEST MATH MODEL CAL LIN RATE INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR SPINTROL --------- 1 REAGENT NUMBER 1 FOR TEST LIPASA REAGENT NAME LIP LINEARITY (C) 3.00000 TO 250.0000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 60 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 0.0 CONSTANT INTERCEPT 0.00000 AUX REAG DISP (SEC) 90.0 CORRECTION LIMIT 0.00000 572 / 660 A 1.00.000.000.000 REAGENT NUMBER 2 FOR TEST LIPASA REAGENT NAME LIP LINEARITY (C) 3.00000 TO 250.0000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 20 REAGENT BLANK YES LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES CORRECTION LIMIT 0.00000 572 / 660 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 250 U/L de Lipasa.
Lipase Colorimetric Standard: reconstitute the contents of one vial with 1 ml of distilled water. Mix gently until complete solution. Stability: 10 days at 2-8ºC.Aliquote calibrator solution into small volumes and freeze.stability:3 months at 20ºC. Introduce the following data in the computer : ENTRY NAME LIP SAMPLE RMAL 3.00 REPORT NAME LIPASE LOW 6.00 HIGH 1.00 TEST NUMBER UNITS PRIM U/L SEC - - TEST TYPE RATE SEC. UNITS FACTOR 0.00000 MATH CAL LIN RATE PRINT DIGITS 1 REAGENTS 2 INST MUL 1.00000 INT 0.00000 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 30.0000 TEST NAME LIP TEST TYPE CALIBRATED COMB TEST MATH MODEL CAL LIN RATE INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST LIPASE REAGENT NAME LIP LINEARITY (C) 3.00000 TO 250.0000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 60 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 0.0 CONSTANT INTERCEPT 0.00000 AUX REAG DISP (SEC) 90.0 CORRECTION LIMIT 0.00000 572 / 660 A 1.00.000.000.000 REAGENT NUMBER 2 FOR TEST LIPASE REAGENT NAME LIP LINEARITY (C) 3.00000 TO 250.0000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 20 REAGENT BLANK YES LOW 0 HIGH 0 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 180 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES CORRECTION LIMIT 0.00000 572 / 660 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 250 U/L of Lipase.
Magnesio Calmagita CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME MG SAMPLE RMAL 2.50 REPORT NAME MAGNESIO LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 1.60000 TO 2.5000 TEST NAME MG TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST MAGNESIO REAGENT NAME MG LINEARITY (C) 0.00000 TO 5.00000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 516 / 660 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 5 mg/dl de Magnesio.
Magnesium Calmagite Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME MG SAMPLE RMAL 2.50 REPORT NAME MAGNESIUM LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 1.60000 TO 2.5000 TEST NAME MG TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST MAGNESIUM REAGENT NAME MG LINEARITY (C) 0.00000 TO 5.00000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 516 / 660 A 1.00.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 5 mg/dl of Magnesium.
Fosfolípidos Trinder CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME FOSFL SAMPLE RMAL 2.50 REPORT NAME FOSFOLIPIDOS LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 200 TO 270 TEST NAME FOSFL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST FOSFOLÍPIDOS REAGENT NAME FOSFL LINEARITY (C) 0 TO 600 LOT ID * INITIAL Ad. 0.300 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 500 / 604 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 600 mg/dl de Fosfolípidos.
Phospholipids Trinder Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME PHOSL SAMPLE RMAL 2.50 REPORT NAME PHOSPHOLIPIDS LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 200 TO 270 TEST NAME PHOSL TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST PHOSPHOLIPIDS REAGENT NAME PHOSL LINEARITY (C) 0 TO 600 LOT ID * INITIAL Ad. 0.300 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 500 / 604 A 1.00.000.000 ** Assign the values of controls and calibrator. LINEARITY This method is linear up to 600 mg/dl of Phospholipids.
Fósforo Fosfomol./U.V. CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME FOSF SAMPLE RMAL 2.50 REPORT NAME FOSFORO LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 1.50000 TO 7.0000 TEST NAME FOSF TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST FOSFORO REAGENT NAME FOSF LINEARITY (C) 0.500 TO 15.000 LOT ID * INITIAL Ad. 0.400 0 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 340 / 404 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 20 mg/dl de Fósforo.
Phosphorus U.V Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME PHOS SAMPLE RMAL 2.50 REPORT NAME PHOSPHORUS LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 1.50000 TO 7.0000 TEST NAME PHOS TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST PHOSPHORUS REAGENT NAME PHOS LINEARITY (C) 0.500 TO 15.000 LOT ID * INITIAL Ad. 0.400 0 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 READ INTERVAL (SEC) 60 CONSTANT INTERCEPT 0.00000 340 / 404 A 1.00.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 20 mg/dl of Phosphorus.
Triglicéridos LPL-GK-GPO-POD CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME TRI SAMPLE RMAL 2.50 REPORT NAME TRIGLICERIDOS LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 36.00000 TO 200.0000 TEST NAME TRI TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST TRIGLICERIDOS REAGENT NAME TRI LINEARITY (C) 10.0000 TO 1000.000 LOT ID * INITIAL Ad. 0.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 240 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 300 MIX TIME (SEC) 1.00 500 / 660 A 1.00.000.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 1000 mg/dl de Triglicéridos.
Triglycerides LPL-GK-GPO-POD Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME TRI SAMPLE RMAL 2.50 REPORT NAME TRIGLYCERIDES LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 72.00000 TO 170.0000 TEST BLANK TYPE REAGENT BLANK TEST NAME TRI TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST TRIGLYCERIDES REAGENT NAME TRI LINEARITY (C) 0.00000 TO 1000.000 LOT ID * INITIAL Ad..500 ABS LIMIT (Ad) 2.20 REAGENT VOL (ul) RM 236 LOW 236 HIGH 236 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 360 MIX TIME (SEC) 1.00 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 1000 mg/dl of Triglycerides.
Proteínas Totales Biuret CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME PT SAMPLE RMAL 5.00 REPORT NAME PROTEINAS TOTALES LOW 10.0 HIGH 2.50 TEST NUMBER UNITS PRIM G/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 6.00000 TO 8.6000 TEST NAME PT TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST PROTEINAS TOTALES REAGENT NAME PT LINEARITY (C) 1.00000 TO 15.0000 LOT ID * INITIAL Ad. 0.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 604 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 660 MIX TIME (SEC) 1.00 548 / 600 A 1.00.000.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 15 g/dl de Proteínas Totales.
Total Proteins Biuret Use a human serum calibrator Introduce the following data in the computer : ENTRY NAME PT SAMPLE RMAL 5.00 REPORT NAME TOTAL PROTEINS LOW 10.0 HIGH 2.50 TEST NUMBER UNITS PRIM G/DL SEC - - MATH LIN REG END PT PRINT DIGITS 1 TEMPERATURE (C) 37 RMAL (C) 6.00000 TO 8.6000 TEST NAME PT TEST TYPE CALIBRATED INTCPT TOL (C) -1000.00 TO 1000.00 REF CAL FACTOR REAGENT NUMBER 1 FOR TEST TOTAL PROTEINS REAGENT NAME PT LINEARITY (C) 1.00000 TO 15.0000 LOT ID * INITIAL Ad. 0.20 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 604 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 660 MIX TIME (SEC) 1.00 548 / 600 A 1.00.000.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 15 g/dl of Total Proteins.
Urea U.V. CALIBRACIÓN Utilizar un suero de calibración adecuado CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME URE SAMPLE RMAL 2.50 REPORT NAME UREA LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC -- MATH LIN REG END PT PRINT DIGITS 1 DOWN TEMPERATURE (C) 37 RMAL (C) 15.00000 TO 45.0000 TEST NAME UREA TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR -240.000 SPÎNTROL ** 1 REAGENT NUMBER 1 FOR TEST UREA REAGENT NAME URE LINEARITY (C) 5.0000 TO 200.0000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES 340 / 380 A 1.00.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 200 mg/dl de Urea.
Urea U.V. Use a human serum calibrator. Introduce the following data in the computer : ENTRY NAME URE SAMPLE RMAL 2.50 REPORT NAME UREA LOW 5.00 HIGH 1.25 TEST NUMBER UNITS PRIM MG/DL SEC -- MATH LIN REG END PT PRINT DIGITS 1 DOWN TEMPERATURE (C) 37 RMAL (C) 15.00000 TO 45.0000 TEST NAME UREA TEST TYPE CALIBRATED INTCPT TOL (C) -2000.00 TO 2000.00 REF CAL FACTOR -240.000 SPÎNTROL ** 1 REAGENT NUMBER 1 FOR TEST UREA REAGENT NAME URE LINEARITY (C) 5.0000 TO 200.0000 LOT ID * INITIAL Ad. 0.80 REAGENT VOL (ul) RM 236 REAGENT BLANK YES LOW 236 HIGH 286 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 60 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 120 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES 340 / 380 A 1.00.000.000 * Assign the values of controls and calibrator. LINEARITY This method is linear up to 200 mg/dl of Urea.
Fosfatasa Acida SFBC CALIBRACIÓN Calibración frente a un Factor. CONDICIONES OPERATORIAS Introducir en la memoria del ordenador los siguientes parámetros: ENTRY NAME ACP SAMPLE RMAL 25.00 REPORT NAME FOSFATASA ACIDA LOW 30.00 HIGH 10.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 7.00000 TEST NAME ACP TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST FOSFATASA ACIDA REAGENT NAME ACP LINEARITY (C) 1.50000 TO 150.0000 LOT ID * INITIAL Ad. 0.800 0 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 600 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES READ INTERVAL (SEC) 300 CONSTANT INTERCEPT 0.00000 404 / 660 A 1.00 14.8.000.000 ** Introducir el valor asignado al calibrador LINEALIDAD La técnica es lineal al menos hasta 150 U/L de Fosfatasa Acida.
Acid Phosphatase SFBC Calibration in front of a Factor. Introduce the following data in the computer : ENTRY NAME ACP SAMPLE RMAL 25.00 REPORT NAME ACID PHOSPHATASE LOW 30.00 HIGH 10.00 TEST NUMBER UNITS PRIM IU/L SEC - - MATH LIN REG RATE KIN BLNK PRINT DIGITS 0 TEMPERATURE (C) 37 RMAL (C) 0.00000 TO 7.00000 TEST NAME ACP TEST TYPE CALIBRATED COMB TEST MATH MODEL LIN REG RATE KIN BLNK INTCPT TOL (C) -2000.00 TO 2000.00 % TOL OF CAL FACTOR 10 REAGENT NUMBER 1 FOR TEST ACID PHOSPHATASE REAGENT NAME ACP LINEARITY (C) 1.50000 TO 150.0000 LOT ID * INITIAL Ad. 0.800 0 REAGENT VOL (ul) RM 236 REAGENT BLANK LOW 236 HIGH 336 BEFORE WASH CYCLES 5 FIRST READ TIME (SEC) 300 AFTER WASH CYCLES 5 LAST READ TIME (SEC) 600 MIX TIME (SEC) 1.00 NUMBER OF READS 2 COOLING YES READ INTERVAL (SEC) 300 CONSTANT INTERCEPT 0.00000 404 / 660 A 1.00 14.8.000.000 LINEARITY This method is linear up to 150 U/L of Acid Phosphatase.