INDUSTRIAL CHEMICALS



Similar documents
Product list Magnesium, Calcium and further mineral compounds

Raven and Conductex Products for Specialty Applications

AMBERLITE IRP69 Pharmaceutical Grade Cation Exchange Resin (Sodium Polystyrene Sulfonate USP)

AMBERLITE IRP64 Pharmaceutical Grade Cation Exchange Resin (Polacrilex Resin)

3M Ionic Liquid Antistat FC-4400

It's in the details. JOST MINERAL GUIDE

Black epoxy paste adhesive system

family of products is really Reichhold s answer to the growing need to meet more stringent regulations and performance requirements.

North American Stainless

VULCOFAC TAIC-70 O N O . N CAS : N EINECS : Main function :. Crosslinking agent for peroxide cure elastomers

SARKOSYL O, an N-acyl sarcosine, is a corrosion inhibitor for lubricating oils, greases O R C N CH COOH CH 2 3

Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, Product Description

TiO 2. : Manufacture of Titanium Dioxide. Registered charity number

PRETREATMENT TECHNICAL DATA SHEET WATER EMULSIFIABLE RUST PREVENTATIVE PRODUCT DESCRIPTION

Technical Data Sheet February 2014

PETER GREVEN Your partner for food/feed, pharma & cosmetic additives (FPC)

Chlorinated polyethylene ELASLEN TM. Application for Wire and Cable

ISANE Isoparaffin Products

CUNO TM Series NB Bags for Liquid Filtration

Development of an innovative bio-based structural adhesive

TERMS AND CONDITIONS

SILICONE SOFTENERS FOR STAIN REPELLENT AND STAIN RELEASE FABRIC FINISHING. Fernando Vazquez Dow Corning Corporation Greensboro, N.C.

Performance Evaluation of Actimask 92S Ibuprofen: A Novel Taste-Masked Ibuprofen for Use in Orally-Dispersible Dosage Forms

MATERIAL SAFETY DATA SHEET

IB Chemistry. DP Chemistry Review

North American Stainless

Corrosion Inhibitors for Metalworking Fluids

Wire Drawing Soap Lubrication: Principles And Factors Affecting Selection

Silane Coupling Agents

NON-WOVEN COMPOSITE OFFICE PANEL

3 Scotch-Weld TM. Epoxy Adhesive DP110 Translucent and Gray. Technical Data December, 2009

North American Stainless

the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in educational facilities and student housing.

Elastomeric Components for Pharmaceutical Applications - Actual Quality Trends - Claudia Petersen. -Senior Manager Biotechnology-

Heat-stable pigments. For surface coatings

GCSE Chemistry Quiz Chemical Reactions

GUR PE-UHMW. Micropowder GUR Micropowders as Additives. Micropowder GUR Micropowders as Additives

ROVACE HP-2931 High Performance Vinyl Acetate/Acrylic Copolymer Emulsion

Material Safety Data Sheet Ampicillin, sodium salt MSDS

UCON Fluids and Lubricants

Decorative Matt Emulsion Paint

North American Stainless

About PMC Polymer Additives

Scotch-Weld. Low-Odor Acrylic Adhesives DP810 DP810 NS. Technical Data June, 2004

Acids, Bases and Salts

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Peroxide or Platinum? Cure System Considerations for Silicone Tubing Applications

EXAMPLE EXERCISE 4.1 Change of Physical State

TAIYO PSR-4000 AUS703

Temperature C Cure time to reach hours LSS > 1MPa minutes

ACIDS, BASES AND SALTS

Properties and Classifications of Matter

GDChVCW Konferenz February 28, 2013

Tableting Punch Performance Can Be Improved With Precision Coatings

Gloss, reactivity and adhesion

PARALOID EXL-2691A/3691A Impact Modifier For polycarbonate and polycarbonate/abs blends

Araldite AV 170. Advanced Materials. One component epoxy adhesive. Structural Adhesives. Key properties. Description. Product data.

Baerlocher Additives for PVC. Cables and Wires. we add character to plastics

Industrial Attachment Tapes X-Series. Value, Performance. & Quality. Simply X.

Kemet DIAMOND PRODUCTS

Fixapret NF. Technical Information

3M MATERIAL SAFETY DATA SHEET NO. 4004, 4008, 4026 AND 4032 DOUBLE COATED URETHANE FOAM TAPE 07/29/2002

PETER GREVEN Competence in pharma, cosmetics and food stuffs

COEFFICIENT OF THERMAL EXPANSION FOR VARIOUS MATERIALS AT DIFFERENT TEMPERATURES

SILASTIC 9161 RTV Silicone Elastomer

AspiroTM. EOR Polymers and Surfactants

Exercise Naming Binary Covalent Compounds:

DEEPSEALSM SERVICE SOLUTIONS

EUDRAGIT E 100, EUDRAGIT E PO and

PLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction

CONSIDERATIONS FOR MOVING FROM INDUSTRIAL TO MEDICAL MOLDING

Safety Data Sheet (SDS)

TAED activator for peroxide bleaching of recycled pulp

MONOETHYLENE GLYCOL (MEG) (Monoethylene Glycol / MEG)

Electrical Maintenance Workshop

SELLING TERMS AND CONDITIONS

(616) Ann Street N.W. Emergency Phone Grand Rapids, MI 49504

The optimum material solution for Low Voltage energy cables

still different technique of assessment.

Dual Laser InfraRed (IR) Thermometer with Color Alert

Molysulfide. Particle Size Analysis

Metal Rescue Rust Remover Technical Data

Chemical Equations and Chemical Reactions. Chapter 8.1

Warranties All Products. Revised: 8/1/15 7 Pages

Kieralon JET-B Conc.

Subject: Technical Letter 22 April 1977 Removal of Water Supply Contaminants -- Copper and Zinc

Basic Properties and Application of Auto Enamels

Handling Corrosive or Abrasive Liquids

Cambridge International Examinations Cambridge International General Certificate of Secondary Education

Alharith Hassan. Q 10 Method of Shelf-life estimation. Methods of Chemical stabilisation 11/20/2015

7. Chemical Waste Disposal Procedures

3M Industrial Adhesives and Tapes Division Industrial Bonding Solutions for Woodworking

Automotive Base Oil Presentation

K-KAT Guide to Tin-Free Catalysts For Urethane Coatings

Reliability of the DRAGON Product Family Application Note

MRC Polymers Inc. Material Safety Data Sheet. Product Name: Naxaloy PC/ABS blends Product Series: 750, 760, 770, 770A3, 770A4, 770A5, 770A6, 770L, 772

ACUSOL 820 Rheology Modifier and Stabilizer

Zacsil. Zaclon potassium silicates. Zaclon LLC Technical Information

MANUFACTURER: RTP COMPANY Information Phone: EAST FRONT STREET Emergency Phone: WINONA MN 55987

Transcription:

INDUSTRIAL CHEMICALS

Active Zinc Oxides/Zinc Carbonates Direct/Indirect Zinc Oxides Product Composition Applications and Characteristics Zinc Oxide RAC/ Active Zinc Oxide Zinc Oxide RAC 25 B activator for sulfur and thiuram vulcanization B ideal for slow reactive systems like EPDM B excellent cost/performance ratio B optimal composition for vulcanization B reduction of heavy metal content up to 50 % in comparison to conventional Zinc Oxide RAC CS Formulation of active Zinc Oxide + carrier systems B vulcanization activator with remarkably reduced zinc content by simultaneously giving better physical properties B produced according to the Core-Shell principle Zinc Oxide AC Active Zinc Oxide Catalyst Industry B high purity for zinc catalyst process B high surface area for high performance B ideal particle structure B activator for sulfur and thiuram vulcanization B for production of transparent and translucent rubber articles Activator RS Active Zinc Derivative B vulcanization activator with lower zinc and heavy metal content for giving better physical properties B 1 : 1 replacement of thermal zinc oxide Activator CS Combination of Active Zinc Derivatives + carrier B vulcanization activator with minimum zinc content warranting better physical properties B produced according to the Core-Shell principle Zinc Carbonate RAC Hydrozincite, Zinc Oxide Sulfur Absorption B for hydrogen sulfide removal (e.g. in oil exploration) B highly active zinc compound, excellent cost/performance ratio Zinc Carbonate AC Hydrozincite, Zinc Oxide Chemical Industry B raw material for organic zinc derivatives (e.g. zinc soap and zinc salt, catalyst, cosmetic and home care products) B high purity and reactivity B activator for sulfur and thiuram vulcanization B for production of transparent and translucent rubber articles Actisorb RU Formulation of LDH (layered double hydrates) B acid scavenger mineral based for ECO, CO, FKM, FPM, CSM Blancolene TP 1185 Zinc Dimethacrylate B high performance crosslinker for peroxide vulcanization Zinc Oxide Pharma Zinc Oxide, 99,8 % Indirect Zinc Oxide B compliant with all common pharmacopoeia (EP, DAB, USP, BP) B applications in cosmetic industry Zinc Oxide White Seal Zinc Oxide, 99,7 % Indirect Zinc Oxide B high purity, fine particle structure B wide ranges of application, rubber and paints B plastic and chemical industry Zinc Oxide Red Seal Zinc Oxide, 99,4 % Indirect Zinc Oxide B usable in all common applications (e.g. varnishes and paints) B well known and used in rubber industry Zinc Oxide Special Zinc Oxide, 99,2 % Direct Zinc Oxide B ZnO with a wide range of applications B very good application characteristics in: B glass, enamel, ceramic industries, chemical industry, oil additive B rubber industry, lubricants, fertilizers

Bruggolite /BlancolenE Reducing and Antioxidant Agents Product Composition Applications and Characteristics Bruggolite FF6M Sulfinic Acid Derivative Formaldehyde free Reducing Agent B high reactivity grade B enhanced performance in removal of residual monomers B non yellowing B microgranules Bruggolite FF7 Sulfinic Acid Derivative Formaldehyde free Reducing Agent B high reactivity grade B enhanced performance in removal of residual monomers B non yellowing Bruggolite TP1328 Formaldehyde free Reducing Agent B new development with improved reactivity B specially suitable for low ph systems B non yellowing Blancolene HP Antioxidant B applicable to latices and solids B heat resistant up to 200 C B prevents yellowing in polymers Bruggolite E01 Bruggolite NF Bruggolite L40 Bruggolite No 5 Sodium Formaldehyde Sulfoxylate Sodium Formaldehyde Sulfoxylate Stabilized Solution of Sodium Formaldehyde Sulfoxylate Stabilized Solution of Sodium Formaldehyde Sulfoxylate Reducing Agent B for water-based polymerization and textile industry B powder or granules B based on over 80 years of experience in production B manufactured in Germany Pharma Reducing Agent B Pharmaceutical quality B specified and tested according to the latest issue of USP Liquid Reducing Agent B for water-based polymerization and textile industry B water-based solution ready for processing B optimization of handling Liquid Reducing Agent B for textile industry B odor optimized Blancolene T Sulfinic Acid Derivative Reducing Agent B specially stabilized for the production of titanium dioxide B improved whiteness B better process reliability in comparison to trivalent-system Blancolene TL Sulfinic Acid Derivative Liquid Reducing Agent B specially stabilized for the production of titanium dioxide B water-based solution ready for processing B improved whiteness by reduction of transition metals B better process reliability in comparison to trivalent-system, optimization of handling Sodium Hydrosulfite S, N, F Sodium Dithionite Reducing Agent B printing and dyeing in the textile and leather industry B bleaching of minerals and aluminum oxides B water treatment e.g. in the galvanization industry B for the bleaching of wood pulp, and recycled paper Blancolene K Sodium Dithionite Reducing Agent B bleaching of animal fibers, vegetable fibers, and synthetic fibers Blancolene RH Sodium Dithionite Reducing Agent B bleaching of recycling paper

Manufacturer and Application Specialist Reducing Agents and Highly Active Zinc Derivatives BrüggemannChemical is the only manufacturer of Sodium Formaldehyde Sulfoxylate (SFS) in the Western World. As a leading manufacturer committed to R&D in the field of sulfur-based reducing agents, BrüggemannChemical offers a broad portfolio of sulfinic acid derivates (Bruggolite and Blancolene ). New processes and procedures improve the efficiency of our zinc derivatives thus opening up new application areas. Our active zinc oxides stand for optimum benefit to the customer. Our aim is to offer innovative, easy to use products in different delivery forms, such as powder, granulate, or aqueous concentrates. High quality standards and reactivity allow for efficient dosage and competitive advantages. Second Generation Core-Shell Zinc Derivates BrüggemannChemical successfully applied the Core-Shell- Technology on zinc derivatives. The newly developed materials Activator CS2 and Zinc Oxide RAC CS2 feature highly effective zinc ions that provide best performance in rubber application with at the same time reduced zinc content. These Core-Shell-types are designed to exchange all standard zinc oxides 1:1.

Active Zinc Derivatives our speciality BrüggemannChemical is specialized in the production of active zinc derivatives with a very high specific surface area manufactured under special conditions. This product innovation enables us to create an optimum formulation for a wide range of applications. Together with our customers we constantly develop and improve our products. Our product program also encompasses direct and indirect zinc oxide. Therefore we are able to support almost every application. Zinc Carbonate a long-standing product with big potential BrüggemannChemical has a long-standing experience in the production of zinc carbonates. High quality and efficiency are required by a wide range of applications in the chemical, pharmaceutcial and cosmetic industries. Ever increasing demands create new challenges resulting in individual solutions developed together with our customers.

CONTACTS BrüggemannChemical L. Brüggemann Kommanditgesellschaft Salzstrasse 131 74076 Heilbronn, Germany Phone +49 (0 ) 7131 15 75-0 Fax +49 (0 ) 7131 15 75-25-111 info@brueggemann.com BrüggemannChemical U.S., Inc. 1361 Baltimore Pike Chadds Ford, PA 19317, USA Phone +1 (610) 353 9852 Fax +1 (610) 353 9853 usa@brueggemann.com BrüggemannChemical Asia, Ltd. Room 1705, 17/F, 625 King s Road North Point, Island East, Hong Kong Phone +852-3460-2527 Fax +852-3460-2522 asia@brueggemann.com Disclaimer of Representations and Warranties; Limitation of Liability L. Brüggemann K.G., BruggemannChemical U.S., Inc., BrueggemannChemical Asia Ltd. and their affiliated companies (collectively, the Bruggemann Group ) make no representations or warranties of merchantability or of fitness for any particular purpose or use, and make no other express or implied representations or warranties with respect to the Bruggemann Group products described herein, including, but not limited to, any information provided by any company of the Bruggemann Group, whether orally or in writing, as to the chemical and physical characteristics of such products. The information contained herein and any other related information provided, orally or in writing, by any company of the Bruggemann Group is provided to the best of the Bruggemann Group s knowledge. The information contained herein is of a general nature and is for informational purposes only. Product specifications must in each case be expressly agreed upon in writing or may be provided by the respective company of the Bruggemann Group in a separate document which must be expressly related to a particular purchase order. Each buyer or user is responsible for conducting its own tests to determine the chemical and physical characteristics of a Bruggemann Group product or its suitability for an intended purpose or use. In no event shall any company of the Bruggemann Group be liable to any buyer or user of the Bruggemann Group products for any loss or damages, direct or indirect, of any kind or nature (including general, special, incidental, consequential, liquidated, or punitive damages or any damages calculated by reference to loss of anticipated revenues or profits, or loss of use of products, costs of replacement products, or additional expenses incurred in the use of products), or for any other damages to the property or person of any buyer or user, in each case which may arise as a result of the use or application of the Bruggemann Group products described herein or the information provided by any company of the Bruggemann Group, negligently or otherwise, or the infringement of any patent, trademark or other intellectual property rights. Each buyer and user of a Bruggemann Group product shall obtain and review the applicable material safety information before handling any of the Bruggemann Group products. All of the provisions of the General Terms and Conditions of Sale and Delivery of any company of the Bruggemann Group, as amended from time to time, including, but not limited to, those relating to the extent and limitations of the liability of the respective company of the Bruggemann Group, will apply to all sales of the Bruggemann Group products and are incorporated by reference herein. www.brueggemann.com