Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness: Tempered safety glass: 8, 10, 12 and 12.7 mm laminated glass: 8.7 12.7 mm With counter case With fixed glass panels With angled profile for wall mounting With wall connection HAWA-Junior 40/80/120/GP HAWA-Junior 40/80/GS HAWA-Junior 40/80/120/GP HAWA-Junior 40/80/120/GP HAWA-Junior 40/80/120/GP HAWA-Junior 40/80/GS Cut out dimension Lock Wall connection Required glass cut outs sliding door lock and counter case Required glass cut outs for lock bracket with striking plate AH.108
Lock All-glass sliding door lock for profile cylinder, without cover plates 941.24.022 Counter case Strike patch, without cover caps, with set of centring pieces 941.24.033 Accessories for lock and counter case Drilling jig for lock and counter case 941.24.090 Security escutcheon 12 mm for profile cylinder 17/61 mm 946.31.900 Lock bracket Lock bracket with striking plate, without cover cap 941.24.031 Lock bracket with striking plate, for fixed glass panels 941.24..034 AH.109
Lining for striking plate Material/ Aluminium, silver coloured anodized Thickness Lining for striking plate in combination with fixed glass panels 9 mm 941.24.092 Lining for striking plate in combination with Hawa-Junior 40 angled profile 3 mm 941.24.093 Lining for striking plate in combination with Hawa-Junior 80 angled profile 6 mm 941.24.091 Lining for striking plate in combination with Hawa-Junior 120 angled profile 12 mm 941.24.094 Order reference The base plates are only required in combination with Hawa Junior angled profile for wall mounting and Hawa Junior 120 without angled profile Wall connection Dimensions: Wall profile (W x H) 3 x 21 mm rubber buffer for wall profile (W x H) 28 x 21 mm Length Wall profile, aluminum Silver coloured anodized 2,00 mm 941.24.92 3,00 mm 941.24.93 Stainless steel coloured anodized 2,00 mm 941.24.82 3,00 mm 941.24.83 Rubber buffer Black Roll à 2, m 941.24.081 Locking plate for wall profile, with centring unit Roll à 3, m 941.24.082 Black 941.24.040 AH.110
Cover caps Material Plastic Pair of cover plates for lock (profile cylinder), round Stainless steel coloured 941.24.129 Untreated 941.24.120 Chrome plated matt 941.24.124 Chrome plated polished 941.24.122 Brass plated polished 941.24.128 Cover plate for counter case, round Stainless steel coloured 941.24.139 Untreated 941.24.130 Chrome plated matt 941.24.134 Chrome plated polished 941.24.132 Brass plated polished 941.24.138 Cover plate for lock bracket with striking plate Stainless steel coloured 941.24.149 Untreated 941.24.140 Chrome plated matt 941.24.144 Chrome plated polished 941.24.142 Brass plated polished 941.24.148 Cover plate for lock bracket Stainless steel coloured 941.24.063 Untreated 941.24.064 Chrome plated matt 941.24.060 Chrome plated polished 941.24.061 Brass plated polished 941.24.062 Pair of cover plates for lock (profile cylinder), square Stainless steel coloured 941.24.229 Untreated 941.24.220 Chrome plated matt 941.24.224 Cover plate for counter case, square Stainless steel coloured 941.24.239 Untreated 941.24.230 Chrome plated matt 941.24.234 AH.111
Junior side-fix angle profile HAWA Angle bracket for timber sliding door applications Junior 40 Junior 80 Angle bracket for glass sliding door applications Elegant design with concealed mounting Continuous profile for simple leveling Easy and fast to install No drilling of running track and angle profile No additional support structure required Can be used for timber or glass sliding doors Max. weight per door leaf 40 kg or 80 kg Angle profile: Aluminium, clear anodized Cover caps: Plastic, grey Junior 40 Junior 80 Easy and fast installation of angle profile and running track AH.112
For wall mounted sliding door applications with Junior 40 running tracks Angle profile, for glass sliding doors, pre-drilled 2,000 mm 940.40.201 4,000 mm 940.40.401 6,000 mm 940.40.601 Angle profile, for timber sliding doors, pre-drilled 2,000 mm 940.40.203 4,000 mm 940.40.403 6,000 mm 940.40.603 Fastening bolts and nuts, set of 10 pieces (10 pieces sufficient for 2000 mm track length) 1 set 940.40.099 Cover caps, for angle profile and running track for glass sliding doors 1 pair 940.40.061 Cover caps, for angle profile and running track for timber sliding doors 1 pair 940.40.063 For wall mounted sliding door applications with Junior 80 running tracks Angle profile, for glass sliding doors, pre-drilled 2,00 mm 940.80.21 4,000 mm 940.80.401 6,000 mm 940.80.601 Angle profile, for timber sliding doors, pre-drilled 2,00 mm 940.80.203 4,000 mm 940.80.403 6,000 mm 940.80.603 Fastening bolts and nuts, set of 10 pieces (10 pieces sufficient for 2000 mm track length) 1 set 940.80.099 Cover caps, for angle profile and running track for glass sliding doors 1 pair 940.80.061 Cover caps, for angle profile and running track for timber sliding doors 1 pair 940.80.063 Note Running tracks and fitting sets have to be ordered separately AH.113
Assembly wedge Suitable for Junior 80/B, Junior 120/B and Silent 10/B For end fixing of sliding doors running in the ceiling Allows installation and removal of the sliding doors without disas sembly of the door lining and cover Fixing Consider for the constructions: If a pelmet is fitted, this must either be removable or a 100 mm wide removable lock strip must be fitted on the lock side. The sliding door must run max. mm in the ceiling or in the top of the door lining When closed, the sliding door must not protrude more than 0 mm into the cavity Mounting wedge, 2 pcs. 940.80.00 AH.114
Guide track for gap width 12 mm Suitable for Junior 40/80/120, Symmetric, Normafitt For gap width: 12 mm Length: 1,300 mm Plastic black 940.41.130 Guide track for gap width 10 mm Suitable for Junior 40/80/120, Symmetric, Normafitt, Media Gap width: 10 mm Plastic black 940.40.031 Guide track for gap width 10 mm, 1-part Side adjustable free of play For wall installation Eliminates door rattle Gap width: 10 mm Floor guide free of play: plastic brown, guide angle bracket: aluminium 940.40.071 Guide track for gap width 10 mm, 2-part Side adjustable free of play With retainer for cover panel For wall installation Gap width: 10 mm Floor guide free of play: plastic brown, guide angle bracket: aluminium, retainer: zinc alloy 940.40.072 AH.11
Guide track for gap width 17 mm Suitable for-junior 160 Length: 3,000 mm For gap width: 17 mm Plastic black 941.61.130 Guide track for gap width 14 mm Suitable for Junior 160 Gap width: 14 mm Plastic brown 941.60.031 Guide track for gap width 14 mm, 1-part Side adjustable free of play Eliminates door rattle With short guide angle For wall installation Gap width: 14 mm Floor guide free of play: plastic brown, guide angle bracket: aluminium 941.60.071 Guide track for gap width 14 mm, 2-part Side adjustable free of play Eliminates door rattle With long guide angle For wall installation Gap width: 14 mm Floor guide free of play: plastic brown, guide angle bracket: aluminium, retainer: zinc alloy 941.60.073 AH.116
Floor guide for gap width 14 mm, 2-part Side adjustable, free of play Eliminates door rattle With retainer for cover panel For wall installation Gap width: 14 mm Floor guide free of play: plastic brown, guide angle bracket: aluminium, retainer: zinc alloy 941.60.072 Adjustable floor guide free of play Floor guide free of play to screw on Eliminates door rattle Vertically adjustable Gap width: 14 mm Plastic brown 941.60.032 Floor guide Suitable for Super 00 Gap width: mm Steel galvanized 942.41.031 AH.117
Dust seal profile 2,00 mm With brush of artificial fibre Screw-mounted to sliding doors Aluminium unanodized 406.41.807 With brush of artificial fibre To be glued on sliding doors Plastic brown 406.01.107 Sealing and edge protection profile,000 mm For timber doors Prevents loud impact Prevents damage to the door front edges Seals the closed door Installation The front edge of the sliding door is routed to install the profile. The distance between the grooves determines the profile height. Material/ Neoprene brown 940.00.21 Neoprene black 940.00.30 Neoprene beige 940.00.40 Neoprene cream white 940.00.49 AH.118
Rubber profile,000 mm 4 For vertical glass edge protection-recommended for glass door that can strike against one another Self adhesive For 8/10 mm glass thickness Rubber black 404.9.321 Centering door stop for glass doors without lock For accomodating the sliding door With rubber buffer Mounting on the wall Plastic, grey Dimension 60 x 33 x 14 mm 941.24.042 AH.119
Self-adhesive profile for glass panel For glass door thickness min. 6 mm Material: Plastic Colour: White transparent Length For glass thickness 3,000 mm 6 mm 90.08.830 Flush pull handle For sliding thoughened glass doors For glass thickness 8 10 mm Brass, satin nickel plated or satin chrome plated Satin chrome plated 901.01.224 Satin nickel plated 901.01.226 Packing: 1 pc. incl. fixing material AH.120
Sliding door lock Minima For sliding glass door For glass thickness 8 10 mm Brass, satin nickel plated or satin chrome plated Satin chrome plated 940.78.104 Satin nickel plated 940.78.106 Packing: 1 pc. incl. fixing material, cylinder and turn Strike box Minima For sliding glass door For glass thickness 8 10 mm Brass, satin nickel plated or satin chrome plated Satin chrome plated 940.78.114 Satin nickel plated 940.78.116 Packing: 1 pc. incl. fixing material Flat strike plate for hook lock Brass, satin nickel plated or satin chrome plated Satin chrome plated 981.14.124 Satin nickel plated 981.14.126 Packing: 1 pc. AH.121