Safety gloves. Single-handedly providing the expertise you need

Safety gloves Single-handedly providing the expertise you need 107

competence Manufacturing and technologi Innovative hand protection solutions German quality Injuries to the hand are one of the most frequently reported of all industrial accidents and are associated with high consequential costs for businesses. uvex s inno vative glove solutions provide you with exceptional safety and cost-efficiency for all industrial applications. Design principles which provide maximum protection and outstanding wearer comfort, ensure a high level of compliance with safety policies and a major contribution to risk management. 108 Based in Lüneburg, PROFAS GmbH & Co. KG is the uvex safety group s centre of expertise for safety gloves. Production at our Lüneburg facility ensures that the highest levels of quality control are maintained, yielding positive cost and environmental outcomes. Leading-edge manufacturing processes, design and development, in-house sewing together with a laboratory with extensive testing and application technology, work synergistically to form a tight-knit internal network. After all, quality means more to us than just a perfect product. Talk to us when it comes to hand protection and tell us your individual requirements. We ll provide the right solution oriented to your specific activities.

technology cal expertise What makes a good safety glove? The consistent high-quality of our safety gloves is guaranteed by carefully selected raw materials, solid processing methods and stringent production controls based on the guidelines of European norms. Equally integral to the uvex approach is our commitment to conti nuous product development and conformity with new safety requirements. The use of high quality natural fibres that are well tolerated by the skin is the precondition for feeling comfortable. This is critical as only a glove that is worn can provide protection. Copying nature: a completely new ergonomic fit. The PROFAS Flat-Ergo Technology with anatomically shaped phalanges. Oeko-Tex-certified natural materials such as jersey cotton liners or knitted liners with bamboo thread provide for a pleasant wearing feeling and optimal comfort. Certified according to Oeko Tex Standard 100 Proven levels of safety for you and your employees. Everything that comes into contact with skin has to satisfy the most exacting requirements and this is why we decided to have all knitted gloves in our PROFI, CONTACT, HELIX, NK, RUBIFLEX, and RUBIFLEX S ranges, certified according to the stringent testing criteria of Product Class II. PROFAS safety gloves always come with a flexible, optimally cross-linked coating that provides excellent abrasion resistance in practice. The result: safety gloves with unsurpassed wearing comfort and the best tactile feel. Because only the combination of optimal design, skin-friendly comfortable materials and effective coating technology makes a safety glove for daily work really perfect. 109

PROFAS range Mechanical risks For mechanical risks Supported safety gloves Coating: Nitrile Profi Ergo range Rubiflex Compact range Page 112 CE conformity symbol Knitted safety gloves Pictogram with EN standard Glove description Manufacturer Glove size Unigrip Unilite Unipur range Page 113 Cut protection safety gloves Test Abrasion resistance (in cycles) Cut resistance (factor) Tear resistance in N Penetration in N P e r f o r m a n c e l e v e l 1 100 1.2 10 20 2 500 2.5 25 60 3 2000 5.0 50 100 4 8000 10.0 75 150 5 20.0 helix C5 range helix C3 range NK range Unidur range Pages 116-119 110

PROFAS range Chemical risks For chemical risks Supported safety gloves Coating: Nitrile Testing institute no. See accompanying instructions for use CE conformity symbol Mechanical performance level Pictogram with EN standard Rubiflex S Rubiflex SZ Rubiflex XG Pages 120-121 Unsupported safety gloves Glove description The letters symbolise the test chemicals for which the glove achieved at least the Class 2 protection index (also see page 31). Manufacturer Glove size Nitril Profastrong Chloropren Profapren Page 121 Permeation Permeation is the measure of the molecular penetration of the safety glove material. The amount of time the chemical takes to penetrate is specified in a protective index according to EN 374. The actual extent of protection in the workplace may vary considerably from those given in the EN 374 index. For further information please contact your uvex Technical Representative. Disposable safety gloves Time measured to penetration Protection index > 10 min Class 1 > 30 min Class 2 > 60 min Class 3 > 120 min Class 4 > 240 min Class 5 > 480 min Class 6 u-fit nitrile Pages 122 111

Xtra Grip Technology Secure grip. Excellent flexibility. Whether it s in sports, in technical environments or behind the wheel, a powerful grip is essential in many applications. Without it the risk of an accident increases and energy is lost, particularly in wet or oily environments. This applies especially to safety gloves, as a weak grip leads to hand fatigue, increasing the potential risk of injury. With the innovative uvex Profas Xtra grip technology, these problems are a thing of the past. Multilayer design for greater safety Special coating for a more secure grip Durable nitrile coating Cotton stockinet for real comfort Surface of skin The highly absorbent cotton lining of the Xtra grip technology gloves ensures exceptional comfort, whilst the addition of a nitrile coating provides absolute impermeability. uvex Profas RUBIFLEX XG 35B uvex provides maximum chemical protection with the supported RUBIFLEX XG 35B. Greater resistance time Together with the multilayer design, the advanced surface structure ensures a greater resistance time. Use in oily and wet environments The canal structure of the Xtra grip technology gloves absorbs liquids, helping maintain a secure grip on tools and components. 112

Greater resistance time. Exceptional comfort. Xtra Grip technology providing exceptional grip in wet and oily environments. *Product shown in illustration is not available in Australia and New Zealand. 113

Mechanical risks Supported safety gloves with NBR coating PROFI ERGO RUBIFLEX COMPACT RUBIFLEX Very high-quality NBR coated safety glove. Highly flexible with excellent dexterity, exceptionally hard-wearing and durable. anatomical shape highly flexible excellent dexterity comfortable fit fully coated, provides a barrier against non-hazardous liquids excellent abrasion resistance light/medium metal processing maintenance/servicing painting/coating repair work inspection 3111 Part no. NB27 (3 1 1 1) Sizes Length approx. 27 cm Construction Five-finger glove, cuff, seamless coating Base glove Cotton interlock Coating NBR (nitrile butadiene rubber) Colour orange Resistance good resistance to oil and grease PROFI ERGO The classic safety glove, now with an even better fit thanks to ergonomic shaping. An extremely functional, high quality, all-round and hard-wearing safety glove. 2121 excellent ergonomic fit good dexterity good abrasion resistance good resistance to oil, grease and fuel very good dry grip proven high wearer acceptance good perspiration absorption due to cotton lining light/medium metal processing repairs/maintenance all-round glove Part no. ENB20A ENB20 (2 1 2 1) (388 (2121) Sizes 7, 8, 9, 10 7, 8, 9, 10 Length approx. 27 cm 27cm Construction Five-finger glove, knitted cuff, partially coated back Five-finger glove, knitted cuff, fully coated back Base glove Cotton interlock Cotton interlock Coating Special NBR (nitrile butadiene rubber) Colour orange orange Resistance good resistance to oil and grease NB 27 G COMPACT A particularly robust safety glove with exceptional abrasion and good tear resistance. Suitable for manual tasks involving raw materials. 4221 exceptional abrasion resistance good cut and tear resistance full and partial coated NBR available wrist protection from canvas cuff (NB27E,H) excellent ventilation metal processing machine construction wood working transport industry concrete/construction 114 NB 27 E NB 27 H Part no. NB27E NB27G NB27H (4 2 2 1) 388 (4 2 2 1) 388 (4 2 2 1) Sizes 10 10 10 Length approx. 27 cm 27 cm 27 cm Construction Five-finger glove, canvas cuff, partially coated Five-finger glove, knitted cuff, partially coated Five-finger glove, canvas cuff, fully coated Base glove Jersey cotton Jersey cotton Jersey cotton Coating NBR (nitrile butadiene rubber) Colour blue blue blue Resistance good resistance to oil and grease

Mechanical risks Knitted safety gloves UNIGRIP UNILITE UNIPUR UNILITE Knitted safety glove with microporous nitrile foam coating. It fits like a second skin, enabling even small objects to be handled with precision. extremely light weight outstanding dexterity right to the fingertips excellent mechanical abrasion resistance microporous foam coating excellent grip on dry and (slightly) moist objects due to nitrile foam exceptional wearer comfort due to the airflow allowed by the foam coat fine assembly work sorting inspection/finishing light manual handling maintenance Part no. UL6600 (4 1 2 1) Sizes 6, 7, 8, 9, 10 Length approx. 22-27 cm Construction Five-finger glove, knitted cuff, palm and fingertip with microporous nitrile coating Base glove Knitted nylon Coating NBR (nitrile rubber), foamed Colour white/grey Resistance dry and slightly moist areas UNIGRIP Knitted safety glove with crinkle latex coating This high-quality knitted safety glove features excellent grip capabilities and is suitable for general mechanical risk applications. It offers flexibility and an excellent fit. outstanding dexterity Latex coated palm and fingertips for excellent grip mechanical strength extremely lightweight flexible good abrasion resistance fine assembly work precision work construction industry warehousing horticulture industry Part no. UG6629 (2 1 2 1) Sizes 6, 7, 8, 9, 10 Length approx. 22-27 cm Construction 13 gauge knit, palm and fingertip coated Base glove Nylon Coating crinkle latex Colour blue 2121 UNIPUR These safety gloves are ultra light, flexible and provide outstanding dexterity. The palms and fingertips are coated with NBR (UP6634) or Polyurethane (UP6631). fine assembly work precision work automotive industry construction industry ultra lightweight outstanding dexterity good grip in wet conditions flexible exceptional abrasion resistance mechanical strength silicone free (UP6634) Part no. UP6634 UP6631 (4 1 3 3) 388 (4 1 4 1) Sizes 7, 8, 9, 10 7, 8, 9, 10 Length approx. 22-27 cm 22-27 cm Construction Five-finger glove, ribbing, palm and fingertip with NBR coating Five-finger glove, knitted cuff, palm and fingertip with PU coating Base glove Knitted nylon Knitted nylon Coating NBR (nitrile butadiene rubber) Polyurethane Colour grey/black grey / grey Resistance oil and grease resistant dry and slightly moist areas 4133 4141 115

technology helix C3 & C5 with Bamboo TwinFlex Technology Experience Innovation! uvex PROFAS innovation in the field of hand protection has raised the bar in levels of protection, comfort, flexibility and dexterity. Helix safety gloves combine all of the properties in one high-tech solution. Through the combination of uvex technologies including Bamboo TwinFlex for cut resistance and comfort, the helix range of safety gloves is the ultimate benchmark. cut protection levels 3 & 5 first-class comfort high durability Bamboo TwinFlex Technology robust and comfortable bamboo environmentally sustainable raw material cooling effect Bamboo TwinFlex Technology The Bamboo TwinFlex protective function: cut-resistant glass fibres and abrasion-resistant guarantee optimum mechanical protection. exterior The Bamboo TwinFlex comfort function: soft, comfortable bamboo thread for a silky feel and perfect temperature regulation combined with robust Dyneema fibres for high tear resistance. lining Double Face Principle Polyamide (abrasion resistance) Bamboo (comfort) Glass (cut protection levels 3 & 5) Dyneema (tear resistance) uvex climazone In pursuit of continuous improvement in hand protection, uvex climazone is subject to ongoing research and development in conjunction with market-leading research institutes, including the Hohenstein Institute and the Pirmasens Institute (PFI). reduced sweating high breathability outstanding moisture absorption Natural dexterity The new anatomically shaped helix gloves accurately replicate the contours of the human hand. Due to a new, innovative flat ergo mould, the natural dexterity of the gloves has been much improved, resulting in a perfect shape and fit. anatomic shape excellent grip natural dexterity 116 Bamboo TwinFlex technology is a registered brand of Profas GmbH & Co KG, Germany. Dyneema is a registered trademark of Royal DSM N.V.

helix C3 & C5 High performance coating technologies technology uvex PROFAS grip technologies uvex has developed innovative materials for the new helix range of cut protection safety gloves. Three unique coating materials are used across the helix range: High Performance Elastomer (HPE) SoftGrip Foam The HPE SoftGrip Foam guarantees a steady grip when used in dry and slightly oily conditions. This microporous coating is breathable, providing a stable internal climate and a high degree of comfort. used in helix C3/C5 foam High Performance Elastomer (HPE) coating The liquid-resistant HPE coating ensures suitability for applications in very wet or oily environments. With its extended coating coverage, the helix wet plus provides increased liquid protection. They also perform strongly in dry applications due to their excellent abrasion resistance. used in helix C3/C5 wet and wet plus, and helix C3 carbon High Performance Vinyl (HPV) micro-nubs The High Performance Vinyl (HPV) micro-nubs are the latest uvex Profas grip technology in the helix range. An innovative anatomical nub design with flexzones enables exceptional grip right down to the fingertips, making precision work easier than ever. The HPV enables outstanding performance, temperature regulation, breathability and flexibility in dry applications. used in helix C3/C5 dry 117

Mechanical risks Cut protection safety gloves with Bamboo TwinFlex technology HELIX helix C5 uvex Profas Bamboo TwinFlex technology innovative SoftGrip coating exceptional cut protection (Cut 5) high wearer comfort due to uvex climazone outstanding dexterity exceptional abrasion resistance flexible silicone-free on the basis of the fingerprint test certified according to Oeko-Tex Standard 100 4542 4542 4542 Part no. helix C5 wet metal industry automobile industry transportation work assembly work glass industry maintenance and repair shipping/logistics brewery/beverage industry paper industry construction helix C5 wet (HX60492) EN 388 (4 5 4 2) Sizes Length approx. 27 cm Construction Five-finger glove, ribbing, palm and fingertips coated Base glove Bamboo-rayon/ Coating High Performance Elastomer (HPE) wet Colour lime/anthracite oil and grease resistant Resistance helix C5 wet plus (HX60496) 388 (4 5 4 2) 27 cm Five-finger knitted glove, partially coated back of hand Bamboo-rayon/ High Performance Elastomer (HPE) wet lime/anthracite oil and grease resistant 254X Part no. helix C5 wet plus helix C5 sleeve 118 helix C5 foam helix C5 dry helix C5 liner helix C5 dry (HX60499) EN 388 (2 5 4 X) Sizes Length approx. 27 cm Construction Five-finger knitted glove, grip nubs on palm Base glove Bamboo-rayon/ Coating High-performance vinyl (HPV), grip nubs Colour lime/anthracite Resistance for dry areas helix C5 foam (HX60494) 388 (4 5 4 2) 27 cm Five-finger glove, ribbing, palm and fingertips coated Bamboo-rayon/ High Performance Elastomer (HPE), SoftGrip foam lime/anthracite moisture resistant 254X helix C5 liner (HX60497) 388 (2 5 4 X) 27 cm Five-finger knitted glove 254X Bamboo-rayon/ none helix C5 sleeve (HX60491) 388 (2 5 4 X) one size fits all 40 cm Forearm protection with velcro fastening Bamboo-rayon/ none lime underglove lime for dry areas Bamboo TwinFlex technology is a registered brand of Profas GmbH & Co KG, Germany. Dyneema is a registered trademark of Royal DSM N.V.

Mechanical risks Cut protection safety gloves with Bamboo TwinFlex technology HELIX helix C3 uvex Profas Bamboo TwinFlex technology innovative SoftGrip coatings extremely comfortable thanks to uvex climazone excellent dexterity good cut protection (Cut 3) exceptional abrasion resistance flexible silicone-free on the basis of the fingerprint test certified according to Oeko-Tex Standard 100 4342 4342 4342 Part no. helix C3 wet helix C3 carbon helix C3 wet (HX60542) 388 (4 3 4 2) EN Sizes Length approx. 27 cm Construction Five-finger knitted glove, coated palm and fingertips Base glove Bamboo viscose/ High Performance Coating Elastomer (HPE) helix C3 wet plus (HX60546) 388 (4 3 4 2) 27 cm Five-finger knitted glove, partially coated palm and extended on reverse Bamboo viscose / High Performance Elastomer (HPE) Colour Resistance anthracite light liquid resistant anthracite light liquid resistant 4342 234X 234X Part no. helix C3 wet plus helix C3 foam helix C3 dry helix C3 liner automotive engineering aerospace metal industry maintenance assembly transport construction oil and gas helix C3 foam (HX 60544) 388 (4 3 4 2) EN Sizes Length approx. 27 cm Construction Five-finger knitted glove, coated palm and fingertips Base glove Bamboo viscose/ High Performance Coating Elastomer (HPE), SoftGrip-Foam Colour anthracite moisture resistant Resistance helix C3 dry (HX60549) 388 (2 3 4 X) 27 cm Five-finger knitted glove, grip nubs on palm Bamboo viscose/ High Performance Vinyl (HPV) grip nubs anthracite for use in dry areas helix C3 carbon (HX60545) 388 (4 3 4 2) 27 cm Five-finger knitted glove, coated palm and fingertips Bamboo viscose/ /Carbon High-performance elastomer (HPE) foam with carbon nanotubes (CNT) anthracite moisture resistant helix C3 liner (HX60547) 27cm Five-finger knitted glove Bamboo viscose/ none anthracite underglove Bamboo TwinFlex technology is a registered brand of Profas GmbH & Co KG, Germany. Dyneema is a registered trademark of Royal DSM N.V. 119

Mechanical risks Cut protection safety gloves with multi-layer technology NK range NK2724 - for oily applications This high-quality NBR-coated safety glove is exceptionally comfortable to wear. Thanks to its multilayer technology cotton/dyneema / glass and its dual nitrile coating, it provides excellent cut protection. The rough surface ensures exceptional grip. anatomical shape flexible excellent cut protection comfortable fit excellent grip good resistance to oils sheet fabrication industry machine and tool construction all work with oil and high risk of cuts tasks with extreme mechanical stress NK 2724 NBR impregnation for enhanced grip Excellent cut-resistant Dyneema /glass/ Nitrile coating to protect against oils and fluids Cotton layer for outstanding wearer comfort Skin surface NK2724B for chemical applications This high-quality NBR-coated safety glove is exceptionally comfortable to wear. Thanks to cotton/dyneema / glass multilayer technology and the double nitrile coating, it offers optimal cut resistance and chemical resistance plus outstanding endurance. The rough surface ensures exceptional grip. anatomical shape flexible excellent cut protection comfortable fit excellent grip good resistance to many chemicals chemical industry machine and tool construction all work with high risk of cuts, or requiring chemical protection Part no. NK2724 (3 4 4 2) Sizes 9, 10 Length approx. 27 cm Construction Five-finger glove, seamless coating, cuff Base glove Sandwich liner cotton interlock/dyneema /glass/ Coating Special NBR (nitrile butadiene rubber) Colour orange Resistance for dry applications 3442 EN 374 Part no. NK2725B (3 4 4 2), 374 Sizes 9, 10 Length approx. 27 cm Construction Five-finger glove, seamless coating, cuff Base glove Sandwich liner cotton interlock/dyneema /glass/ Coating Special NBR (nitrile butadiene rubber) Colour blue Resistance excellent resistance to grease, mineral oils and many chemicals 3442 A J K NK 2724B NBR impregnation for enhanced grip Excellent cut-resistant Dyneema /glass/ Nitrile coating to protect against chemicals Cotton layer for outstanding wearer comfort Skin surface 120 Dyneema is a registered trademark of Royal DSM N.V. Dyneema is a registered trademark of Royal DSM N.V.

Mechanical risks Cut protection safety gloves UNIDUR range UNIDUR Cut protection safety gloves with PU coating This safety glove is flexible and provides outstanding dexterity. Dyneema fibre provides exceptional resistance to cuts. PU coated palm and fingertips ensuring good grip and breathability. Also available unidur cable pulling glove - fingerless at the thumb, fore and index fingers allowing for complete touch and outstanding dexterity (UD6613). flexible outstanding dexterity fingerless at thumb, fore and index fingers (UD6613) high abrasion and tear resistance good cut resistance due to Dyneema fibre mechanical strength metal/glass industry automotive industry packaging horticulture/agriculture electrical trades (not for voltage protection) applications needing cut protection & high levels of dexterity UD6641 UNIDUR - Cut protection safety gloves with NBR coating This safety glove is flexible and provides outstanding dexterity. It stands out due to its excellent resistance to cuts and abrasion. Palms and fingertips coated with NBR. UD6613 flexible outstanding dexterity exceptional abrasion resistance excellent cut and tear resistance due to Dyneema fibre mechanical strength coating is fluidproof against oil metal industry automotive industry packaging glass industry Part no. UD6641 UD6613 (4 3 4 3) 388 (4 3 4 3) Sizes 7, 8, 9, 10 7, 8, 9, 10 Length approx. 22-27 cm 22-27 cm Construction Five-finger glove, knitted cuff, palm and fingertips with PU coating Fingerless at thumb, fore and index finger, knitted cuff, palm and fingertipcoated with PU coating Base glove Knitted Dyneema Knitted Dyneema Coating Polyurethane Polyurethane Colour white/grey coating white/grey coating Resistance for dry areas and slightly moist areas 4344 Part no. UD6643 (4 3 4 4) Sizes 7, 8, 9, 10 Length approx. 22-27 cm Construction Five-finger glove, knitted cuff, NBR coating on palm and fingertips Base glove Knitted Dyneema Coating NBR (nitrile butadiene rubber) Colour black Resistance resistant to oil, grease Dyneema is a registered trademark of Royal DSM N.V. 121

Chemical risks Supported safety gloves with NBR coating RUBIFLEX S RUBIFLEX S XG35B The new, lightweight chemical- resistant safety glove with innovative xtra grip technology combines protection and grip with exceptional comfort and flexibility. In addition to a comfortable fit, stockinet chemical-resistant safety gloves provide excellent protection against chemicals and mechanical hazards. exceptional dry and wet grip multilayer design for excellent resistance time ergonomic fit high flexibility excellent resistance to many chemicals ultra lightweight design cotton lining for superior water vapour absorption chemical industry automotive industry painting laboratory work Part no. EN Sizes Length approx. Construction Base glove Coating Thickness approx. Colour Resistance anatomic shape highly flexible good abrasion resistance good resistance to chemicals, fats, acids and mineral oils cotton lining for superior water vapour absorption Part no. EN Sizes Length approx. Construction Base glove Coating Thickness approx. Colour Resistance 122 chemical/petrochemical industry alumina refining (level 6 sodium hydroxide caustic soda) battery manufacturing (sulphuric acid {battery acid} level 6) automotive industry metal processing industry mechanical industry sandblasting municipal cleaning drainage construction EN 374 JKL 2121 NB40S 374, 388 (2 1 2 1) 8, 9, 10,11 40cm Five-finger glove, reinforced, cuff, seamless coating Cotton interlock Special NBR (nitrile butadiene rubber) 0.50 mm green excellent resistance to grease, mineral oils and many chemicals JKL 3121 XG 35 B 374, 388 (3 1 2 1) 8, 9, 10, 11 35 cm Five-finger glove, cuff, seamless coating Cotton interlock Special NBR (nitrile butadiene rubber) + XG grip coating 0.40 mm blue/black excellent resistance to grease, mineral oils and many chemicals RUBIFLEX S This comfortable NBR safety glove, seamlessly coated in a reinforced design, with excellent chemical resistance and good abrasion resistance. Available up to 60cm length, with or without elastic collar at the cuff end. EN 374 Reinforced construction

Reinforced construction Chemical risks Supported/unsupported safety gloves made from NBR/PVC/chloroprene RUBIFLEX S PROFASTRONG PROFAPREN RUBIFLEX S (long version) 60cm in length, with or without elastic collar at the cuff end. anatomic shape highly flexible good abrasion resistance good resistance to chemicals, fats, acids and mineral oils cotton lining for superior water vapour absorption chemical/petrochemical industry municipal cleaning drainage construction EN 374 J K L 2121 PROFASTRONG Nitrile safety glove, proven in environments with acids, grease and solvents. exceptional abrasion resistance good grip for wet surfaces anatomic shape good dexterity printing industry chemical industry automotive industry laboratories EN 374 Part no. NB60S NB60SZ EN 374, 388 (2 1 2 1) 374, 388 (2 1 2 1) Sizes 9, 10, 11 9, 10, 11 Length approx. 60 cm 60 cm Construction Five-finger glove, reinforced, seamless coating, cuff Five-finger glove, reinforced, seamless coating, elastic collar at cuff end Base glove Cotton interlock Cotton interlock Coating Special NBR (nitrile butadiene rubber) Thickness approx. 0.50 mm 0.50 mm Colour green green Resistance excellent resistance to grease, mineral oils and many chemicals A J K L 4101 Part no. NF33 EN 374, 388 (4 1 0 1) Sizes 7, 8, 9, 10 Length approx. 33 cm Construction Five-finger glove, cuff, patterned inside hand Base glove Flocked cotton Coating NBR Thickness approx. 0.38 mm Colour green Resistance good resistance to oils, grease, acids and solvents PROFAPREN High-quality unsupported chloroprene safety glove for protection against a broad spectrum of different chemicals. The silicone-free safety glove provides an excellent balance of properties against chemical and mechanical risks. good combination of flexibility and strength resistant against a large number of chemicals and solvents chemical industry metal processing (cleaning) painting/coating Part no. CF33 EN 374, 388 (3 1 3 1) Sizes 7, 8, 9, 10 Length approx. 33 cm Construction Five-finger glove, cuff, patterned inside hand Base glove Flocked cotton Coating Polychloroprene (latex on the inside) Thickness approx. 0.75 mm Colour dark blue Resistance good resistance to many chemicals EN 374 A K L 3131 123

Chemical risks Disposable safety gloves u-fit nitrile EN 374 EN 374 uvex Profas u-fit nitrile The u-fit nitrile is the perfect choice for precision work which also requires mechanical strength. 124

Chemical risks Disposable safety gloves u-fit nitrile The human hand is a marvel of nature which is just as well because it is often exposed to demanding external influences and dangers. With the u-fit nitrile, uvex PROFAS offers a quality disposable safety glove which guarantees a high degree of protection and functionality. u-fit nitrile gloves fit snugly and are the perfect choice for precision work which also requires mechanical strength. Properties of/areas of application for u-fit nitrile: reliable protection from splashes when working with chemicals in the form of acids, alkalis, solids and aqueous saline solutions highly resistant to grease and oil, therefore highly suited for use in production uvex PROFAS u-fit nitrile MATERIAL EN 374: Protective gloves against chemicals and micro-organisms: EN 374-2: Determination of resistance to penetration Testing in accordance with EN 374-2 confirms whether a glove is free of imperfections and by definition resistant to liquids and micro-organisms. The u-fit gloves are tested to an AQL of 1.5 during production. Pictogram for waterproof safety gloves and limited chemical resistance Pictogram for protection against bacteriological contamination Nitrile Material thickness approx. 0.12 mm Silicone-free EN EN 455: Medical gloves for single use: Powder-free EN 455-1: Requirements and testing for freedom from holes EN 455-2: Requirements and testing for physical properties EN 455-3: Requirements and testing for biological evaluation No latex proteins CERTIFICATION EN 374, EN 455 Food handling (LFGB and RAL certification) PROPERTIES Very good mechanical strength Good chemical resistance (splashproof) Good grip HANDLING Dispenser box with large opening Use of the safety gloves when in contact with food: These symbols certify that the gloves do not pose a migration risk when used in direct contact with food. Testing is performed by an accredited testing authority in accordance with the German Food and Feed Code (LFGB). Please note the product specifications. Reinforced rolled edge easy to put on u-fit nitrile u-fit nitrile gloves fit snugly and are the perfect choice for precision work which also requires mechanical strength. very good mechanical strength reliable protection from splashes when working with chemicals in the form of acids, alkalis, solids and aqueous saline solutions good grip exceptional fit precision assembly work product protection gentle cleaning examination work food temporary contact with chemicals paint shop (as splash protection) EN 374 Part no. Certification Sizes Length approx. Construction Material Material thickness approx. Colour Resistance Contents EN 374 u-fit nitrile EN 374 (Chemical), EN 455 (Medical), LFGB and RAL (Food) S, M, L, XL 24 cm Five-finger glove, napped fingertips Nitrile (silicone-free, powder-free) 0.12 mm green highly resistant to grease and oil Box of 100 125

Safety gloves Sizing, norms and markings Glove sizes in accordance with EN 420:2003 Protective gloves, general requirements and test methods It is very important that the correct glove size is provided and worn and clear guidance is provided to ensure that sizing is right first time. Two measurements are required to establish the correct size the hand circumference (A = right hand palm down, fingers together, across knuckles) and length (B = distance between wrist and tip of middle finger). Measurements are given in mm. uvex safety gloves Glove sizes in accordance with EN 420:2003 6 7 8 9 10 11 Measurements in mm Glove length 220 230 240 250 260 270 Hand circumference (A) 152 178 203 229 254 279 Hand length (B) 160 171 182 192 204 215 EN 407 Heat and fire 0 to 4 0 to 5 0 to 4 0 to 4 0 to 4 0 to 4 Behaviour regarding heat/fire Contact heat Performance levels given in numbers: the higher the number, the better the test results Mechanical risks Convective heat Radiant heat 0 to 4 0 to 5 0 to 4 0 to 4 Abrasion resistance Cut resistance Performance levels given in numbers: the higher the number, the better the test results EN 374 (1-3) Chemical risks Tear resistance Resistance to small molten metal splash Penetration Resistance to large molten metal splash Safety gloves can be divided into three different categories: 1. Minimal risks Personal protective equipment (PPE) for minor safety requirements where the user is assumed to be capable of evaluating the impact of the risks, e.g. temperatures up to 50 C or gardening work. 2. Medium risks PPE that does not fall into categories 1 or 3, e.g. mechanical risks. 3. Complex protection PPE for protection against lethal dangers or serious and irreversible injury, e.g. protection against chemicals. The European Directive 89/686/EEC specifies the fundamental requirements for PPE. Norms for safety gloves were devised for these different requirements. 126 J K L Letter symbol A B C D E F G H Test chemical Methanol Acetone Acetonitrile Dichloromethane Carbon disulphide Toluene Diethylamine Tetrahydrofurane A glove is considered to be resistant to chemicals if it attains a protection index of at least Class 2 (i.e. > 30 min) with three test chemicals.em dolorem duipiscing eraesecte endipsu msandre I J Ethyl acetate n-heptane K Sodium hydroxide 40 % L Sulphuric acid 96 % The pictogram with the beaker stands for waterproof safety gloves with low protection against chemical dangers. Please consult the accompanying instructions for use!