FSI Simulation with Abaqus and Third-party CFD Codes 6.14
About this Course Course objectives Upon completion of this course you will be able to: Evaluate FSI applications Create compatible FE and CFD models for FSI Run FSI problems Develop co-simulation strategies Use time incrementation options Targeted audience This seminar is recommended for both structural and CFD engineers with an interest in evaluating and analyzing real world FSI applications. Prerequisites None 2 days
Day 1 Lecture 1 Introduction Lecture 2 Technical Details Lecture 3 Conducting an FSI Simulation using Abaqus and STAR-CCM+ Workshop 1a Antilock Braking System (Abaqus + FLUENT) Workshop 1b Antilock Braking System (Abaqus + STAR-CCM+)
Day 2 Lecture 4 Classifying FSI Applications Workshop 2a Stead-State Flow in an Exhaust Manifold (Abaqus + FLUENT) Workshop 2b Stead-State Flow in an Exhaust Manifold (Abaqus + STAR-CCM+) Lecture 5 Miscellaneous Topics
Additional Material Appendix 1 An Overview of CFD for Structural Analysts Appendix 2 Coupling Schemes and Rendezvousing Appendix 3 Conducting an FSI Simulation using the MpCCI GUI and FLUENT
Join the Community!
Legal Notices The Abaqus Software described in this documentation is available only under license from Dassault Systèmes or its subsidiary and may be used or reproduced only in accordance with the terms of such license. This documentation and the software described in this documentation are subject to change without prior notice. Dassault Systèmes and its subsidiaries shall not be responsible for the consequences of any errors or omissions that may appear in this documentation. No part of this documentation may be reproduced or distributed in any form without prior written permission of Dassault Systèmes or its subsidiary. Dassault Systèmes, 2014 Printed in the United States of America. Abaqus, the 3DS logo, SIMULIA, and CATIA are trademarks or registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other company, product, and service names may be trademarks or service marks of their respective owners. For additional information concerning trademarks, copyrights, and licenses, see the Legal Notices in the Abaqus 6.14 Installation and Licensing Guide.
Revision Status Lecture 1 8/14 Updated for 6.14 Lecture 2 8/14 Updated for 6.14 Lecture 3 8/14 Updated for 6.14 Lecture 4 8/14 Updated for 6.14 Lecture 5 8/14 Updated for 6.14 Appendix 1 8/14 Updated for 6.14 Appendix 2 8/14 Updated for 6.14 Appendix 3 8/14 Updated for 6.14 Workshop 1a 8/14 Updated for 6.14 Workshop 1b 8/14 Updated for 6.14 Workshop 2a 8/14 Updated for 6.14 Workshop 2b 8/14 Updated for 6.14
www.3ds.com Dassault Systèmes Lesson 1: Introduction L1.1 Lesson content: SIMULIA Multiphysics Fluid-Structure Interaction Multiphysics Coupling Target Applications Software Suite Examples 45 minutes
www.3ds.com Dassault Systèmes Lesson 2: Technical Details L2.1 Lesson content: Technical Approach Software Architecture Independent Code Coupling Interface through MpCCI SIMULIA Co-simulation Engine Code Coupling Process 30 minutes
www.3ds.com Dassault Systèmes Lesson 3: Conducting an FSI Simulation using Abaqus L3.1 Lesson content: Suggested Workflow FSI Workflow using STAR-CCM+ Example: Flow through a Flexible Pipe Workshop Preliminaries Workshop 1a: Antilock Braking System (Abaqus + FLUENT) Workshop 1b: Antilock Braking System (Abaqus + STAR-CCM+) 1.5 hours
www.3ds.com Dassault Systèmes Lesson 4: Classifying FSI Applications L4.1 Lesson content: FSI Coupling Spectrum Unidirectional Coupled Analysis Bidirectional Coupled Analysis Workshop 2a: Stead-State Flow in an Exhaust Manifold (Abaqus + FLUENT) Workshop 2b: Stead-State Flow in an Exhaust Manifold (Abaqus + STAR-CCM+) 2.5 hours
www.3ds.com Dassault Systèmes Lesson 5: Miscellaneous Topics L5.1 Lesson content: The Abaqus *CO-SIMULATION option Axisymmetric Analysis Restart Analysis Convergence Estimating Coupling Strength Postprocessing a CFD Solution with Abaqus/CAE Troubleshooting Checklist for Running Coupled Simulation 75 minutes
www.3ds.com Dassault Systèmes Appendix 1: An Overview of CFD for Structural Analysts A1.1 Appendix content: Introduction Governing Equations for Fluid Dynamics Computational Fluid Dynamics Fluid Properties CFD Modeling 45 minutes
www.3ds.com Dassault Systèmes Appendix 2: Coupling Schemes and Rendezvousing A2.1 Appendix content: Definitions Implicit and Explicit Time Integration Coupling Schemes Rendezvousing 1 hour
www.3ds.com Dassault Systèmes Appendix 3: Conducting an FSI Simulation using the MpCCI GUI and FLUENT A3.1 Appendix content: Suggested Workflow Step-by-Step Example Summary of MpCCI Settings for FLUENT Preparing a FLUENT Job for Co-Simulation 1.5 hours