1.800.487.7944 Hyperlite Standard Lengths and Extrusion 39" 23" Hyperlite 11.5" HP3R5-46 HP3R5-39 HP3R5-23 Extrusion EZ6-A1F 23" EZ6-A2F EZ6-A3F EZ6-A4F Hyperlite Curves 28 3/4" radius sections: 51 3/4" radius sections: 90 Curve EZ6-R1F 45 Curve EZ6-R2F 60 Curve EZ6-R3F 30 Curve EZ6-R4F 45 Curve EZ6-R5F 30 Curve EZ6-R6F Connector Brackets Top Corner Bracket HP-BKT- Bottom Corner Bracket HP-BKT-B Extrusion Connector HP-EXTCNT HP-BASE Header Accessories Arc Header 4 width EZ12-HDRHF 48 1/4 radius two pieces EZ12-HDR48$ Arc Header 8 width EZ12-HDR All pieces constructed of steel and powdercoated. Custom items available
Accent Tables HP-ACCTP1 HP-ACCTP2 HP-ACCTP3 HP-ACCTP4 Style 1 - Accent table Style 2 - Accent table Style 3 - Accent table Style 4 - Accent table HP-ACCTP5 HP-ACCTP6 HP-ACCTP7 Style 5 - Accent table Style 6 - Accent table Style 7 - Accent table Shelf Accessories Media Accessories Literature Shelf HP-LIT (individual shelf) Laptop Shelf HP-LPTP (individual shelf) Plasma HP-PLASMA LCD HP-LCD LCD HP-LCD Lights Spot Light BDLT50 Cases for packing Made of Durable Polyethylene. 50W MR16 Lamp Hood rotates and swivels, s to wall or truss. Fluorescent Light SFTLT 21 long for accent, cove and backlighting Exterior dimensions: Model UF4825: 50" x 27" x 10"-16" high Exterior dimensions: Model UF4848: 51.5" x 51.5" x 30.5"-33.5" high
Infill Options - Fabric Panels, Panel Graphics and Slatwall Lexan Graphic Panel Banner clip EZ-BNRCLP Fabric Panel 23 w x 45 h slatwall s between uprights, and is made of lightweight aluminum with a durable powdercoat finish. Our slatwall accepts all standard merchandising. Shelving, retail hanging and merchandising accessories are available. Rollable lexan full graphic panels adhere easily with magnets on the reverse, using a 3/4 bar, that slides into the extrusion channel. Fabric panels are available with full graphics, applied logos, or solid colors. Attaches to truss simply with our invisible clips, for a smooth, seamless look. Slatwall Unit HP-SW2 Hyperlite Assembly Instructions 1 2 3 Assembling Hyperlite is quick and easy. First, install the bottom trusses between the lower half of the uprights. The bottom of the bottom connection should be flush to the bottom of the extrusion. Both should be on the floor with the truss 1/2 off the floor. Next, insert the extrusion connector into the top of each upright and then slide the top half of the upright over the connector. Insure all the channels are properly aligned and tighten the screws. Finally, install the top trusses. The top bracket has a bend at the top so the truss will be flush to the top of the upright. Tighten the wingnuts and you re ready to install your graphics!
Hyperlite Facade System Shelving 23" 23" Laminated Facade Columns Facade Column Accessories Fan column has translucent plexiglass accent at top. Cigar Column HP-FC-BS2 HP-FC-TS2 Fan Column HP-FC-BS1 HP-FC-TS1 HP-FC-BASE Perforated Metal Sconce HP-SCONCE Plexi Display Shelf (approx. 5 deep) PLXSHF Fan Counter Header Accessories Fan Counter EZ-FANCT3 Arc Header Frame Header Standoff- set of two for use with sintra or foamcore overhead graphics All pieces constructed of steel and powdercoated. Custom items available
Counters Style 1 Style 2 Style 3 Oval Locking Counter Oval Locking Counter Oval Locking Counter HP-OVLCTR1 HP-OVLCTR2 HP-OVLCTR3 Style 4 Oval Locking Counter HP-OVLCTR4 Style 5 Style 6 Style 7 Oval Locking Counter Oval Locking Counter Oval Locking Counter HP-OVLCTR5 HP-OVLCTR6 HP-OVLCTR7 Style 1 Style 2 Style 3 Square Locking Counter Square Locking Counter Square Locking Counter HP-RCTCTR1 HP-RCTCTR2 HP-RCTCTR3 Style 4 Square Locking Counter HP-RCTCTR4 Style 5 Style 6 Style 7 Square Locking Counter Square Locking Counter Square Locking Counter HP-RCTCTR5 HP-RCTCTR6 HP-RCTCTR7 * Pricing includes truss system, lights, cases, and may include slatwall where noted. Pricing does not include graphics, shelves, counters (backwall or freestanding) or furniture. Graphics, Computers, Monitors, and A/V equip. available at an additional charge.