Overview.5 & 1. Industrial SSD SATADOM mini PCIeDOM SATA Slim CF Card & EDC CF-SATA & CFast 6 Embedded Flash Storage 6 7 90 91 91 9
.5 & 1. Industrial SSD Our wide selection of SSDs are designed for different applications, including industrial/ embedded, enterprise server, aerospace, defense, and other semi-industrial applications, such as thin clients, POS, and kiosks. Our SSDs come in and types, and support PATA/IDE pin, SATA II (3.0Gb/s). SATADOM Serial ATA Disk on Module (SATADOM) is the world s smallest form factor with exclusive Pin 7 VCC built-in, which simplifies motherboard design. it is robust and enhances the disk functions of various industrial and enterprise applications. SATADOM also supports the SATA II interface with faster data transfer rates and is available in capacities ranging from 1GB up to 1GB. SATA Slim SATA Slim is compliant with the JEDEC MO-97 standard form factor and ATA protocol. It does not require drivers and can be configured as a boot device or a data storage device. It is also suitable for portable/hand-held devices, thin clients, and industrial applications that require the effective reduction of operation system boot time and power consumption. With a 7+15 pin SATA interface, the SATA Slim supports most platforms with a standard SATA port. CF-SATA & CFast CF-SATA has excellent data transfer speed and the same mechanical design as the CompactFlash card. It becomes compliant with Serial ATA by extracting the unused pin from the CF50 pins and replacing it with the SATA interface. The CF-SATA is an i flash type and has a thermal sensor built-in, suitable for semi-industrial applications. Compliant with the CFast.0 standard, it is designed with a 7+17 pin connector and is SATA compatible. The CFast offers data transfer rates of sequential read of up to 130MB/s and of write up to 10MB/s. msata msata is a low-profile interface connector, also known as a Mini-SATA. It enables a Serial ATA to effectively integrate into a small form-factor drive, which is roughly the size of a business card. It can also be integrated into a wide variety of the hard drives and solid state drives (SSDs) used in compact devices, such as laptops, netbooks, and mobile devices. msata supports highperformance data transfer rates of 1.5Gb/s and 3.0Gb/s. CompactFlash (CF) card Industrial CompactFlash Card (icf) provides a high-capacity solid-state flash memory solution that electrically complies with the PCMCIA* ATA standard. Designed to replace traditional rotating disk drives, icfs are embedded solid-state data storage systems that are designed for mobile computing and the industrial workplace. Industrial CompactFlash Cards feature an extremely lightweight and reliable low-profile form factor. Embedded Disk Card (EDC) The EDC offers high-capacity solid-state flash memory that allows simple and fast path upgrades. This embedded solid-state data storage system solution for industrial applications complies with PCMCIA* ATA standards and fits into all platforms with an IDE connector. The EDC comes in capacities ranging from 1MB to 3GB and is available in 0-pin and -pin connector packages. SD & MicroSD Card SD and microsd cards are single-level flash devices built for rugged applications in the embedded fields. As an industrial-grade SD/ microsd card, these cards deliver outstanding performance of up to 0MB per second, as well as excellent endurance and reliability, especially compared to other cards used in the mobile market.
.5 & 1. Industrial SSD Series Name Sequential R/W (MB/sec, max.) Max. Power Consumption External DRAM Buffer icell TRIM Wide temp. OP (-0 C~+5 C) ID-InnoRobust II SATA SSD 1. Military MIL-STD-10 F/G procedure. Qeraser, SEraser, Destroy function 3. 16GB~51GB 00/170 3.75 W (5Vx750mA) 69.5 x 100.10 x 9.30 mm ID-SATA 5000 1. Supported icell, 100% avoid data loss. High speed read/write & High IOPS 3. TRIM supported Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: million hours DSN-xxxJ1AC*** DSN-xxxJ1AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A, 56GB=B56, 51GB=C1 ) GB~51GB 0/00 3.5 W (5Vx700mA) 69.5 x 100.10 x 9.30 mm DSN-xxxJ0AC*** DSN-xxxJ0AW*** ID-SATA 10000 Plus 1. Main stream SSD. Cost-Effective in high speed GB~1GB 0/0. W (5Vx560mA) 69.5 x 100.10 x 9.30 mm DST--xxxJ0AC*** DST--xxxJ0AW*** Name ID-1. SATA D150 SSD ID-InnoRoubst II PATA SSD ID-ATA 9000 Sequential R/W (MB/sec, max.) Max. Power Consumption External DRAM Buffer icell TRIM Wide temp. OP (-0 C~+5 C) 1. Entry, Economy SSD. 1." housing, 50% space saved 3. Low power consumption GB~6GB 130/15 1 W (5Vx00mA) 69.5 x 50.00 x 9.30 mm 1. Military MIL-STD-10 F/G procedure. QEraser, SEraser, Destroy function 3. PATA/ IDE pin Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: million hours GB ~ 56GB 90/90. W (5Vx560mA) 9.5 x 100.10 x 9.30 mm 1. Supported icell, 100% avoid data loss. High speed read/write High IOPS PATA/ IDE pin GB ~ 56GB 90/90. W (5Vx560mA) 69.5 x 100.10 x 9.30 mm D1ST-xxxJ30AC*** DD9-xxxJ1AC*** DD9-xxxJ0AC*** D1ST-xxxJ30AW*** DD9-xxxJ1AW*** DD9-xxxJ0AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A, 56GB=B56, 51GB=C1 )
.5 & 1. Industrial SSD Series ID-EverGreen ID-EverGreen Plus Plus.5''.5'' SATA SATA SSD SSD ID-EverGreen ID-EverGreen.5''.5'' SATA SATA SSD SSD ID-InnoLite ID-InnoLite II.5 II.5 SATA SATA SSD SSD ID-InnoLite ID-InnoLite II 1. II 1. SATA SATA SSD SSD 1. Supported 1. Supported icell,100% icell,100% avoid avoid 1. High 1. High speed speed R/W R/W & High & High IOPS IOPS SSD SSD Main Main 1. stream 1. stream SSD SSD 1. Entry, 1. Entry, Economy Economy SSD SSD data lose Key Features data lose. L Architecture, least 10 times. Budget friendly. 1." housing, 50% space saved. L Architecture, least 10 times. Budget friendly. 1." housing, 50% space saved.. L Architecture, L Architecture, least least 0 times 0 times lifespan prolonged lifespan prolonged lifespan prolonged lifespan prolonged 3. High 3. High speed speed R/W R/W & High & High IOPS IOPS Flash type SATA II 3.0G GB~51GB GB~51GB SATA II 3.0G GB~51GB GB~51GB SATA II 3.0G GB~51GB GB~51GB SATA II 3.0G GB~1GB GB~1GB Max. Channels Sequential max.) Max. Max. Power Power consumption 0 0 / 150 / 150.5.5 W (5Vx500mA) W (5Vx500mA) 0 0 / 150 / 150.5.5 W (5Vx500mA) W (5Vx500mA) 0 0 / 0 / 0.5.5 W (5Vx500mA) W (5Vx500mA) 10 10 / 50 / 50.5.5 W (5Vx500mA) W (5Vx500mA) Thermal Sensor External External DRAM DRAM Buffer Buffer icell icell TRIM TRIM ATA Security Dimension (WxLxH) 69.90 69.90 x 99.0 x 99.0 x 9.30 x 9.30 mm mm 69.90 69.90 x 99.0 x 99.0 x 9.30 x 9.30 mm mm 69.90 69.90 x 99.0 x 99.0 x 9.30 x 9.30 mm mm 69.0 69.0 x 50.00 x 50.00 x 9.00 x 9.00 mm mm Vibration: Vibration: 0G 0G @7~000Hz, @7~000Hz, Shock Shock 1500G 1500G @ 0.5ms, @ 0.5ms, Storage Storage Temperature: Temperature: -55 C~+95 C, -55 C~+95 C, MTBF: MTBF: 1 million 1 million hours hours Standard Standard OP(0 C~+70 C) Wide Wide temp. temp. OP OP (-0 C~+5 C) DSL-xxxJ0AC*** DSL-xxxJ0AW*** DSN-xxxJ0AC*** DSN-xxxJ0AW*** DST-xxxJ0AC*** DST-xxxJ0AW*** D1ST-xxxJ30AC*** D1ST-xxxJ30AW*** xxx xxx = density = density (0GB=0G, (0GB=0G, 0GB=0G, 0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 16GB=16G, 3GB=3G, 3GB=3G, 6GB=6G, 6GB=6G, 1GB=A, 1GB=A, 56GB=B56, 56GB=B56, 51GB=C1 51GB=C1 ) ) ***= ***= flash flash configuration configuration (internal (internal control control code)" code)" SATADOM Series i-socket Pin7 Power Wide temp. OP (-0 C~+5 C) ID-InnoLite SATADOM D150QV ID-InnoLite SATADOM D150QV-L ID-InnoLite SATADOM D150QH 1. High speed & capacity 1. Ultra Low profile 1. High speed & 1. capacity. Optional i-socket housing. High speed & capacity. Horizontal, short SATADOM 3. Design for 1U Server platform 3. Supported mounting hole GB~1GB 10 / 70 1.6 W(5V x 30 ma ) G~1GB 10 / 70 1.6 W(5V x 30 ma ) GB~1GB 10 / 70 1.6 W(5V x 30 ma ) 5.0 x 39. x 6. mm 30.0x35.0x9.5 mm 3.x 0.0 x 1.9 mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 1 million hours DESIH-xxxJ30AC*** DESIH-xxxJ30AW*** DESIL-xxxJ30AC*** DESIL-xxxJ30AW*** DESIB-xxxJ30AC*** DESIB-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G )
SATADOM Series i-socket Pin7 Power Wide temp. OP (-0 C~+5 C) ID-SATADOM D150QV ID-SATADOM D150QV-L ID-SATADOM D150SV-L ID-SATADOM D150SV 1. High speed & capacity SATADOM. Optional i-socket housing GB~6GB 15 / 10 1 W(5V x 00 ma ) 1. Ultra Low profile 1. Low profile SATADOM. High speed & capacity 3. Design for 1U Server platform GB~6GB 1GB~16GB 15 / 10 6 / 33 1 W(5V x 00 ma ) 0.3W 1. Vertical, Ultra slim SATADOM 1GB~16GB 6 / 33 0.3W 5.0x39.5x6. mm 30.0x35.0x9.5 mm 9.5x3.9x9.0 mm 0.9x39.5x7.9 mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million hours DESI-xxxJ30AC*** DESI-xxxJ30AW*** DESIL-xxxJ30AC*** DESIL-xxxJ30AW*** DES-xxxJ30AC*** DES-xxxJ30AW*** DES9-xxxJ30AC*** DES9-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G ) i-socket Pin7 Power Wide temp. OP (-0 C~+5 C) ID-SATADOM D150QH 1. High speed & capacity SATADOM. Horizontal, short SATADOM 3. Supported mounting hole GB~6GB 15 / 10 1 W(5V x 00 ma ) ID-SATADOM D150SH-L 1. High speed & capacity SATADOM. Horizontal, Ultra short form factor. 1G~16GB 6 / 33 1W(5V x 166 ma) ID-SATADOM D150SH 1. Horizontal, Ultra slim SATADOM 1G~16GB 6 / 33 1W(5V x 166 ma) 3.x0.0x1.9 mm 0.x30.3x10. mm 1.x30.x1.mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 1 million hours DESIB-xxxJ30AC*** DESB-xxxJ30AC*** DES9B-xxxJ30AC*** DESIB-xxxJ30AW*** DESB-xxxJ30AW*** DES9B-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A )
mpcie DOM, msata(mo-300) & mdom-u mini PCIeDOM D150 ID-mini PCIeDOM D150 ID-miniDOM-U ID-mSATA D150Q 1. Driver-Less. Optional write protect 3. Optional quick erase function 1. USB interface. compatible with mpcie pinout 1. Optional.. JEDEC MO-300 Pin Definition External DRAM Buffer Wide temp. OP (-0 C~+5 C) mini PCIe Pin 3/5 PERn0/PERp0 Pin 31/33 PETn0/PETp0 GB~6GB 135 / 10 0.66 W (3.3Vx00mA) Optional USB.0 Pin 36 USB_D- Pin 3 USB_D+ GB~GB 30 / 0 0.65 W (5Vx15mA) 30 x 51 x 3.6 mm 30 x 50.95 x 3. mm 9.5 x 50. x 3.5mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million hours DRPP-xxxJ30AC*** DRPU-0GI1AC*** DRPS-xxxJ30AC*** DRPP-xxxJ30AW*** DRPU-0GI1AW*** DRPS-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G ) (JEDEC MO-300) Pin 3/5 - T+/T- Pin 31/33 - R-/R+ GB~6GB 135/130 0.75 W (3.3Vx30mA) Pin Definition External DRAM Buffer Wide temp. OP (-0 C~+5 C) ID-EverGreen msata 1. High speed R/W & High IOPS SSD. L Architecture, least 10 times lifespan prolonged 3. JEDEC MO-300 (JEDEC MO-300) Pin 3/5 - T+T- Pin 31/33 - R-/R+ GB~1GB 110 / 5 0.75 W (3.3Vx30mA) ID-InnoLite msata D150Q 1. Optional. JEDEC MO-300 (JEDEC MO-300) Pin 3/5 - T+/T- Pin 31/33 - R-/R+ GB~1GB 10 / 70 0.75 W (3.3Vx30mA) Optional ID-InnoLite msata mini D150 1. mpcie half form factor. JEDEC MO-300 Pin 3/5 - T+/T- Pin 31/33 - R-/R+ GB~3GB 60/30 0.75 W (3.3Vx30mA) 9.5 x 50.0 x 3.50 mm 9.5 x 50.0 x 3.50 mm 9.5 x 6.0 x 3.70 mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million hours DRPS-xxxJ0BC*** DRPS-xxxJ0BC*** DRPS-xxxJ30AC*** DRPS-xxxJ30AW*** DRPSH-xxxJ30AC*** DRPSH-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A )
SATA Slim (JEDEC MO-97) series Key Features Connector Flash type Connector Max. Flash Channels type Sequential R/W(MB/sec, max.) Max. Power Channels consumption Thermal Sequential Sensor R/W(MB/sec, max.) External Max. Power DRAM consumption Buffer H/W Thermal White Sensor Protect ATA External Security DRAM Buffer H/W White Protect Dimension (WxLxH) Standard Dimension OP (WxLxH) (0 C~+70 C) Wide temp. OP (-0 C~+5 C) Wide temp. OP (-0 C~+5 C) CF Card & EDC ID-SATA Slim J00 ID-SATA Slim D150Q ID-EverGreen SATA Slim ID-InnoLite SATA Slim D150Q 1. High speed R/W & High IOPS ID-SATA Slim J00 1. High speed R/W & High 1. ID-SATA Slim D150Q 1. 1. High speed R/W & High IOPS. L Architecture, ID-EverGreen least SATA 10 Slim times lifespan prolonged 1. High speed R/W & High IOPS 1. Budget friendly ID-InnoLite SATA Slim D150Q 1. Budget friendly IOP SATA 7+15 SATA 7+15. L Architecture, least 10 times lifespan SATA prolonged 7+15 SATA 7+15 SATA II 3.0G GB~1GB SATA 7+15 GB~1GB 0/00.5 W (5Vx500mA) 0/00.5 W (5Vx500mA) Option Option SATA II 3.0G GB~6GB SATA 7+15 GB~6GB 135/130 1 W (5Vx00mA) (BGA 135/130 Type) 1 W (5Vx00mA) (BGA Type) (BGA Type) SATA II 3.0G GB~56GB SATA 7+15 39 x 5 x 6. mm 39 x 5 x 3.3 mm 39 x 5 x 3.3 mm 39 x 5 x 3.3 mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million hours D1SS-xxxJ0AC*** 39 x 5 x 6. mm D1SS-xxxJ30AC*** 39 x 5 x 3.3 mm D1SS-xxxJ0AC*** 39 x 5 x 3.3 mm D1SS-xxxJ30AC*** 39 x 5 x 3.3 mm D1SS-xxxJ0AW*** Vibration: 0G @7~000Hz, D1SS-xxxJ30AW*** Shock 1500G @ 0.5ms, Storage Temperature: D1SS-xxxJ0AW*** -55 C~+95 C, MTBF: 3 million hours D1SS-xxxJ30AW*** xxx D1SS-xxxJ0AC*** = density (0GB=0G, 0GB=0G, D1SS-xxxJ30AC*** 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, D1SS-xxxJ0AC*** 1GB=A, 56GB=B56, 51GB=C1 D1SS-xxxJ30AC*** ) ***= D1SS-xxxJ0AW*** flash configuration (internal control D1SS-xxxJ30AW*** code) D1SS-xxxJ0AW*** D1SS-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A, 56GB=B56, 51GB=C1 ) GB~56GB 0 / 150.5 W (5Vx500mA) 0 / 150.5 W (5Vx500mA) SATA II 3.0G GB~1GB SATA 7+15 GB~1GB 110/0 1 W (5Vx00mA) 110/0 1 W (5Vx00mA) Name Name Key Connector Features Connector Flash type Flash type Power consumption H/W Max. White Power Protect consumption H/W White Protect ATA Dimension Security (WxLxH) Dimension (WxLxH) Wide Standard temp. OP OP (0 C~+70 C) (-0 C~+5 C) Wide temp. OP (-0 C~+5 C) ID-EDC 000 Vertical Type 1. Plactic housing, dust prevention. ID-EDC High compatibility 000 Vertical & reliability Type 1. Plactic housing, dust prevention PIO & MwDMA mode 0-. High compatibility & reliability UltraDMA mode 0-.00 PIO mm & MwDMA Pin Pitch mode ( x 0- ).5 UltraDMA mm Pin Pitch mode ( 0- x 0).00 mm Pin Pitch ( x ).5 mm 1MB~16GB Pin Pitch ( x 0) 1MB~16GB 0/0 0.75 W (5Vx150mA) 0.90/0 W (3.3 0.75 W (5Vx150mA) 0.9 W (3.3 ID-EDC 000 Horizontal Type 1. High compatibility & reliability. ID-EDC Supported 000 mounting Horizontal hole Type 1. High compatibility & reliability PIO & MwDMA mode 0-. Supported mounting hole UltraDMA mode 0-.00 PIO mm & MwDMA Pin Pitch mode ( x 0- ).5 UltraDMA mm Pin Pitch mode ( 0- x 0).00 mm Pin Pitch ( x ).5 mm 1MB~3GB Pin Pitch ( x 0) 1MB~3GB 0/0 0.75 W (5Vx150mA) 0.9 W (3.3Vx150mA) 0/0 0.75 W (5Vx150mA) 0.9 W (3.3Vx150mA) ID-InnoLite EDC 1. Cost-effective Lifesapn. Static ID-InnoLite wear leveling EDCalgorithm 3. Auto ECC function 1. Cost-effective Lifesapn PIO & MwDMA mode 0-. Static wear leveling algorithm 3. Auto UltraDMA ECC function mode 0-.00 PIO mm & MwDMA Pin Pitch mode ( x 0- ).5 UltraDMA mm Pin Pitch mode ( 0- x 0).00 mm Pin Pitch ( x ).5 mm GB~6GB Pin Pitch ( x 0) GB~6GB 0/15 0.75 W (5Vx150mA) 0.9 W (3.3Vx150mA) 0/15 0.75 W (5Vx150mA) 0.9 W (3.3Vx150mA) 0pin: 7.x60.x6.mm 0pin(A,B type): 3.x55x1.7mm pin(a,b type): 3.x55x 6.70mm 0pin: 7.x60.x6.mm 0pin(C,D type): 3.x55x1.6mm pin(c,d type): 3.x55x 9.5mm pin: 7.x50.3x5.mm 0pin(E,F type): 3.x55x1.9mm pin(e,f type): 3.x55x1.9mm pin: 7.x50.3x5.mm 0pin: Vibration: 7.x60.x6.mm 0G @7~000Hz, Shock 0pin(A,B 1500G type): @ 3.x55x1.7mm pin(a,b type): 3.x55x 6.70mm 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million 0pin: hours 7.x60.x6.mm 0pin(C,D type): 3.x55x1.6mm pin(c,d type): 3.x55x 9.5mm pin: DE0H-xxxD31C*** 7.x50.3x5.mm 0pin(E,F type): DE0P%-xxxD31C*** 3.x55x1.9mm pin(e,f type): 3.x55x1.9mm DE0H-D51AC(W)*** pin: 7.x50.3x5.mm DEH-xxxD31C*** Vibration: 0G @7~000Hz, Shock 1500G @ DEP%-xxxD31C***" 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million DEH-D51AC(W)*** hours DE0H-xxxD31C*** DE0H-xxxD31W*** DE0P%-xxxD31C*** DE0P%-xxxD31W*** DE0H-D51AC(W)*** DEH-xxxD31C*** DEH-xxxD31W*** DEP%-xxxD31C***" DEP%-xxxD31W***" DEH-D51AC(W)*** xxx DE0H-xxxD31W*** = density (0GB=0G, 0GB=0G, 0GB=0G, DE0P%-xxxD31W*** 16GB=16G, 3GB=3G ) %=Horizontal DEH-xxxD31W*** type(a,b,c,d,e,f) DEP%-xxxD31W***" xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G ) %=Horizontal type(a,b,c,d,e,f)
CF-SATA & CFast ID-CF-SATA ID-CFast D150Q ID-InnoLite CFast D150Q 1. Replace solution of CF 50pins with SATA interface. Excellent data transfer speed 3. Thermal sensor 1.Excellent data transfer speed.compliant with CFast 1.0 standard 1.Excellent data transfer speed.compliant with CFast 1.0 standard Connector Wide temp. OP (-0 C~+5 C) 50 pin CF Connector i GB~6GB 10 / 90 MB/sec 1 W (5Vx00mA) CFast Type GB~3GB 130 / 110 MB/sec 0.76W (3.3Vx30mA) (BGA Type) CFast Type GB~1GB 10 / 70 MB/sec 0.76W (3.3Vx30mA) 36.0 x.0 x 3.30 mm 36.0.0 3.60mm 36.0.0 3.60 mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million hours DC1M-xxxJ301C*** DC1M-xxxJ301W*** DC1T-xxxJ30AC*** DC1T-xxxJ30AW*** DC1T-xxxJ30AC*** DC1T-xxxJ30AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A ) ID-iCF 9000 ID-iCF 000 ID-InnoLite icf 1. High sustained read and write speed. Power cycling failure preventation 1. High compatibility & reliability 1. Cost-effective Lifesapn. Static wear leveling algorithm 3. Auto ECC function Connector Wide temp. OP (-0 C~+5 C) PIO & MwDMA mode 0- UltraDMA mode 0-7 50 pin CF Connector GB~3GB 95 / 90 1.05 W (5Vx10mA)/0.69 W (3.3Vx10mA) 36. x. x 3.3 mm PIO & MwDMA mode 0- UltraDMA mode 0-50 pin CF Connector 1GB ~ 3GB 0/0 0.75 W (5Vx150mA)/0.9 W (3.3Vx150mA) 36. x. x 3.3 mm PIO & MwDMA mode 0- UltraDMA mode 0-50 pin CF Connector GB-6GB 0/15 0.75 W (5Vx150mA)/0.9 W (3.3Vx150mA) 36. x. x 3.3 mm Vibration: 0G @7~000Hz, Shock 1500G @ 0.5ms, Storage Temperature: -55 C~+95 C, MTBF: 3 million hours DC1M-xxxD71AC*** DC1M-xxxD31C*** DC1M-xxxD51AC*** DC1M-xxxD71AW*** DC1M-xxxD31W*** DC1M-xxxD51AW*** xxx = density (0GB=0G, 0GB=0G, 0GB=0G, 16GB=16G, 3GB=3G, 6GB=6G, 1GB=A )