XenData Product Brief: SX-250 Archive Server for LTO An SX-250 Archive Server manages a robotic LTO library creating a digital video archive that is optimized for broadcasters, video production companies, post-production and media operations. The SX-250 systems scale to 225 TB of near-line LTO capacity. Copyright 2015 XenData Limited. All rights reserved. XenData is a registered trademark of XenData Limited
Introduction The SX-250 archive server manages a robotic LTO library with up to two internal LTO drives. It is available in 12 standard configurations - supporting an LTO tape library with a maximum of 90 slots and two internal SAS or Fibre Channel LTO-6 drives, providing up to 225 TB of near-line LTO capacity. The SX-250 includes a 6 TB disk cache for enhanced performance. It runs XenData6 Server software on a Windows Server 2012 R2 operating system. Files are presented in a standard file/folder structure which may be shared over a network. This non-proprietary approach to the interface means that the archive can be used simultaneously by multiple standard applications. It is compatible with most applications including most MAMs. The LTO cartridges written using the SX-250 are in either LTFS or TAR format. They are self-describing and may be transferred between systems running XenData6 Server and XenData6 Workstation software. When configuring a pool of tapes, the administrator selects either TAR or LTFS as the cartridge format. The system supports a combination of LTFS and TAR cartridges. With the LTFS format, cartridges may be transferred between the SX-250 and a wide range of third party systems. The SX-250 includes a solid state system disk and a 6 TB disk cache which is used to enhance archive and restore performance and may also be used to retain selected files on disk. The base model SX-250 may be upgraded to mirror each of these disks, providing redundancy for enhanced availability. Archive Configuration The SX-250 connects directly to the LTO library via SAS or Fibre Channel cables. It connects to an Ethernet network via 1 GbE or 10 GbE. The network share supports the standard Windows network protocol (CIFS/SMB) and FTP file transfers. The base SX-250 includes two 1 GbE network ports and a spare PCIe slot which may be used for an optional 10 GbE interface card. Alternatively the PCIe slot may be used for an optional Fibre Channel interface card for connection to a SAN. In addition to Ethernet and SAN connectivity, the SX-250 includes two USB 3.0 connections that may be used to locally connected storage devices allowing files to be transferred locally between the USB device and LTO. Functionality Standard Network Interface and Network Protocols The digital archive accepts all Windows file types and presents them in a single file/folder structure. Files are written to and retrieved from the archive as though from a standard disk drive. The solution supports CIFS/SMB or FTP transfers. Windows and Mac Compatibility - Windows and Apple OS X clients are natively supported without need for loading any client software.
Manages Integral Near-line Disk and LTO - The SX-250 includes a 6 TB near-line disk and it manages a robotic tape library. Administrator defined policies determine how long files are retained on disk. Windows Explorer may be used to pre-fetch and flush files and folders. The pre-fetch operation causes the system to restore the selected files and folders to the 6 TB disk cache and flushing causes the selected files and folders to be removed from disk and replaced with sparse files (often termed stub files). Manages Unlimited Offline LTO Cartridges - The SX-250 manages offline LTO cartridges: if an attempt is made to restore a file from an offline LTO tape, the system identifies the barcode or name of the offline cartridge and provides an on-screen notification or email alert. Automatic LTO Replication - The system automatically generates replica LTO cartridges that may be exported from the library for offsite retention. Optimized File Restores - The system restores a queue of files in the shorted possible time. The restore requests are processed in an order that minimizes unnecessary tape movement. Partial Restore With very large files there is often a need to read only a portion of a file. For example, this frequently occurs when a short clip is required from a large video file. The SX-250 supports reading of large files using byte offset. For a total solution that requires partial restore based on time code, a third party application that supports partial restore based on time code should be used with the SX- 250, such as a Dalet media asset management system or a Sienna news room automation system, etc. File Spanning - The system supports spanning of files across LTO tapes. Repack of LTO Cartridges - This allows space to be recovered from old file versions and deleted files. Multiple Tape Pool Support - The system allows groups of files to be allocated to specified pools of LTO cartridges. The Administrator defined policies can be used to group related files together on the same set of cartridges. Self-Describing LTO Cartridges - Each LTO cartridge contains all the file system metadata necessary to recover all the files stored on it. In the case of a catastrophic failure of the hardware, perhaps due to fire or flood, the system will rebuild itself automatically from the self-describing cartridges. Transfer of Content between Systems - LTO cartridges may be transferred between SX-250 servers and other systems running XenData6 Server and XenData6 Workstation software. When using the LTFS format, cartridges may be transferred between SX-250 servers and third party systems that support LTFS. Dynamic Expansion of LTO Cartridge Pools - The system will dynamically expand LTO cartridge pools to meet capacity demands, minimizing system administration. Supported tape formats: TAR and LTFS - The system supports a combination of LTFS and TAR formatted LTO cartridges. Cartridge Contents and File Search Reports - The files contained on any cartridge, including offline cartridges, can be listed in a report. Additionally search reports list all the files and their LTO cartridge barcode locations that match a user-defined search term. The reports may be exported to Excel for further analysis. Automatic Metadata Backup - A file system metadata backup and restore utility provides rapid system restore in case of hardware failure. System Upgrade - Upgrading to a later generation of LTO is a very cost effective way to increase the size of the archive. The SX-250 makes for easy system upgrades, going from an older to a later generation of LTO. Alert Module - A software module is included which provides e-mail and on-screen alerts. These are tailored to the needs of archive system operators, system administrators and IT support personnel. File Version Control The software provides comprehensive file version control. Deleted files and old file versions may be restored from LTO (unless the files have been purged using a repack operation). Supports WORM LTO cartridges XenData systems support both standard rewritable cartridges and unalterable WORM cartridges. The use of unalterable WORM cartridges is especially important for legal compliance applications. Industry Standard File Security - The file server runs Windows Server 2012 R2 Essentials Edition and integrates fully with the Microsoft Windows security model.
XenData File Management Policies The system administrator defines policies that determine where files will be physically stored on the digital archive. These policies support hierarchical storage management (HSM) and automatic LTO cartridge replication. The SX-250 supports three main levels of storage hierarchy: Near-line disk with one instance of a file on the 6 TB disk cache and, in addition, there will typically be one or more instances on LTO. In this case, the file will be retrieved from disk when accessed over the network. Near-line LTO with at least one instance of a file on an LTO cartridge within the library and no instances on disk. When a file on near-line LTO is accessed over the network, the XenData6 Server software automatically transfers the file over the network directly from LTO in response to the network read request. In addition, the file is simultaneously transferred to the disk cache. Offline with no instances on disk and instances of a file on one or more LTO cartridges, all of which have been exported from the tape library. No matter where a file is held in the storage hierarchy, its position in the archive file/folder system does not change. When a file is flushed and it transitions from near-line disk to near-line LTO, the file path, file name and properties do not change, except the Microsoft offline attribute changes to identify that the file is no longer on disk. When a file moves from near-line LTO to being offline because the LTO cartridge on which it is stored is exported from the tape library or ejected from an external tape drive, the file also remains unchanged in the archive file system. The XenData file management policies are defined by the administrator using the XenData Management Console which is shown below. The SX-250 may have many different policies, tailored to the needs of the different file types and folders that are being archived.
Offline LTO Management An SX-250 manages an unlimited number of LTO cartridges that have been taken entirely offline. This means that the capacity of the archive effectively becomes infinite. It also means that operator intervention is required to move LTO cartridges from the shelf to the library when there is a need to restore an offline file. When a file is taken offline by exporting all the LTO cartridges that contain that file, it continues to be shown in the archive file/folder structure. However, this is not the complete file; it is a sparse file which has the same attributes as the complete file, such as reported size, modification date, etc. When an offline file is accessed by a program, a message is returned immediately that identifies that the file is not available. Also the XenData software puts a message in the Windows Event Log and optionally sends an e-mail and/or on-screen message that identifies which LTO cartridges contain the requested file. This notification allows the correct cartridge to be easily identified and then imported back into the LTO library. The file will then be automatically restored when the read request is retried. Performance The SX-250 is suitable for archiving up to about 5 TBs of video assets per day to replicated LTO cartridges. Up to 10 TBs of video assets may be restored per day. The graph below shows the sustainable transfer rates for files ranging from 1 GB to 100 GB in size.
Connections Connections to the rear of the SX-250 archive server are shown below. Models with SAS connections to the LTO Library Models with Fibre Channel connections to the LTO Library The front of the SX-250 includes a USB 2.0 connection, shown below:
SX-250 Models The SX-250 is available in 12 base models, with either SAS or fibre channel library connections and licensed to support the following LTO library configurations: Model XenData SKU Library Connection License Support SX-250-003 222003 SAS One LTO library with one internal LTO drive and up to 25 slots SX-250-004 222004 SAS One LTO library with two internal LTO drives and up to 25 slots SX-250-005 222005 SAS One LTO library with one internal LTO drive and up to 50 slots SX-250-006 222006 SAS One LTO library with two internal LTO drives and up to 50 slots SX-250-007 222007 SAS One LTO library with one internal LTO drive and up to 90 slots SX-250-008 222008 SAS One LTO library with two internal LTO drives and up to 90 slots SX-250-013 222013 FC One LTO library with one internal LTO drive and up to 25 slots SX-250-014 222014 FC One LTO library with two internal LTO drives and up to 25 slots SX-250-015 222015 FC One LTO library with one internal LTO drive and up to 50 slots SX-250-016 222016 FC One LTO library with two internal LTO drives and up to 50 slots SX-250-017 222017 FC One LTO library with one internal LTO drive and up to 90 slots SX-250-018 222018 FC One LTO library with two internal LTO drives and up to 90 slots A wide range of LTO tape libraries are supported. Please refer to the XenData web site for a complete and up to date list. Following initial purchase, the license may be upgraded at a later date. Specifications base configurations Archive management software: Notification software: Operating system: XenData6 Server XenData Alert Module Microsoft Windows Server 2012 R2 Essentials Processor: Intel Xeon 6-core processor RAM: 32 GB System disk: 240 GB SSD Cache disk: 6 TB SAS 7,200 rpm Network connections: 2 x RJ45 connectors; 1000BASE-T, 100-BASE-TX, 10BASE-T USB connections (rear mounted): 2 x USB 3.0 USB connection (front mounted): 1 x USB 2.0 SAS connections to library (SAS models only): 2 x SFF-8088 connectors; 6 Gb/s SAS FC connections to library (FC models only): 2 x LC type connectors; 8 Gb/s Number of power supplies: 1 Power: 100-240V; 50-60 Hz; 6.2-4.1 Amp max Operation temperature: 50-95 F (10-35 C) Operation humidity: 8-90% non-condensing Form factor: Dimensions (HxWxD): Weight: Rack rails: 1U, 23.9 deep 1.7 x 17.1 x 23.9 (42.9mm x 434.6 x 607.6mm) 25.4 lbs (11.5 Kg) Included
Upgrade Options XenData SKU Description Connectivity Options 101048 Dual port 10 GbE network adapter HP 560SFP+ pre-installed in SX-250. This adds two 10 GbE ports to the SX-250 and uses the spare PCIe slot. Transceivers not included. 101057 SFP+ 10 Gb/s LC Short Range Transceiver for insertion in SKU 101048. HP part number J9150A. Quantity 2 required to use both 10 GbE ports in the adapter. 107130 Dual port 10 GbE network adapter for use with standard CAT6 or UTP cabling pre-installed in SX-250. It is an HP model 561T adapter and uses the spare PCIe slot. 101023 Fibre Channel adapter pre-installed in SX-250 for FC SAN connectivity. Provides two 8 Gb/s FC ports with LC type connectors. Uses the spare PCIe slot. Redundancy Options 222002 Additional power supply for SX-250, providing redundancy. 222050 Disk Redundancy Upgrade. Includes an additional 6TB cache disk and system SSD which are pre-installed and configured as mirror disks. Performance Option 222051 32GB of additional RAM pre-installed in the SX-250, taking the total RAM capacity to 64GB. Additional Information For further information, please contact XenData. USA: XenData, Inc., 2125 Oak Grove Road, Walnut Creek, California 94598; Tel: +1 925.465.4300 UK: XenData Limited, Sheraton House, Castle Park, Cambridge CB3 0AX; Tel: +44 1223 370114 Web: www.xendata.com XenData Product Brief - updated Sept 4, 2015