Document Revision 0.5 April 23, 2010 Kontron America, Inc.
Revision History Date Rev Author Modifications 01/21/08 0.1 A. Cress Initial draft, including detail for net-snmp, snmpsa-ah and snmpsa Linux 02/01/08 0.2 A. Cress Moved snmpwalk output to appendices, some edits 04/09/08 0.3 A. Cress Added Linux syslog note to test procedures. Added Windows trap information. 04/23/10 0.4 A. Cress Added Firmware SNMP information ii
Table of Contents 1. SNMP Software Introduction... 1 1.1 Reference Documents... 2 1.2 Conventions, Terminology, and Notation... 2 2. SNMP Package Installation and Configuration... 3 2.1 Net-snmp Linux Package... 3 2.2 MS Windows SNMP Package... 4 2.3 SNMPSA-AH Package... 5 2.3.1 SNMPSA-AH Linux Package... 5 2.3.2 SNMPSA-AH Windows Package... 6 2.4 IDE SW-RAID SNMP Package... 7 2.4.1 IDE SW-RAID SNMP Linux Package... 8 2.4.2 IDE SW-RAID SNMP Windows Package... 8 2.5 SNMPSA Package... 8 2.5.1 SNMPSA Linux Package... 8 2.5.2 SNMPSA Windows Package... 9 2.6 SAS SW-RAID SNMP Package... 10 2.6.1 SAS SW-RAID SNMP Linux Package... 10 2.6.2 SAS SW-RAID SNMP Windows Package... 10 2.7 LSI SCSI SNMP Package... 10 2.8 Intel NIC SNMP Package... 10 3. Firmware SNMP Features... 10 3.1 BMC IPMI SNMP Features... 10 3.2 RMM2 SNMP Features... 11 Appendix A net-snmp snmpwalk output... 12 Appendix B Windows SNMP snmpwalk output... 115 Appendix C snmpsa-ah snmpwalk output... 116 Appendix D IDE SW-RAID snmpwalk output... 119 Appendix E snmpsa snmpwalk output... 120 Appendix F IPMI Firmware PET Traps log... 129 Appendix G RMM2 Firmware snmpwalk output... 130 iii
1. SNMP Software Introduction There are several packages used to provide full SNMP management software for CRMS servers, and some servers have different packages than others, so an overview of the various SNMP packages and how they fit together is needed. Note that the last 4 packages in the table below (in italics) are not SNMP packages per se, but could be used to augment an SNMP enterprise software solution. Package Platform OS Features Comments s net-snmp ALL Linux OS info, CPU, Memory, NIC, and disk status MS SNMP Service ALL Windows OS info, CPU, Memory, and disk status SNMPSA-AH S3000AH Linux & Windows Baseboard: Temp, Fan, Power, plus AMT configuration info IDE swraid snmp S3000AH Linux & Windows LSI Megaide SW-RAID status and traps SNMPSA S5000 Linux & Windows Baseboard: Temp, Fan, Power, plus IPMI configuration and events SAS swraid snmp S5000 Linux & Windows LSI MegaSR SW-RAID status and traps SCSI snmp S5000 Linux & LSI mpt SCSI disk status and traps Windows NIC SNMP ALL Windows Intel NIC status and traps, named PSNMP32. inic-snmp ALL Linux (old) Intel NIC status and traps, only needed for older Linux distros with old net-snmp versions. Not usually needed scsirastools ALL Linux & Windows amtutil (SDK) & AMT RDK sgdiskmon/sdiskmon monitors disks for insert, remove, failure events and can send SNMP traps S3000AH Linux Support for AMT remote management: EventLog, Reset, SOL AMT DTK & SDK S3000AH Windows Support for AMT remote management: EventLog, Reset, SOL ipmiutil S5000 Linux & Windows Support for standard IPMI local and remote management, and configures IPMI PEF rules to send SNMP traps. optional Could be invoked from enterprise mgt station Could be invoked from enterprise mgt station Could be invoked from enterprise mgt station 1
1.1 Reference Documents The following documents could be used to provide further information about SNMP packages: Simple Network Management Protocol version 1 specification. http://www.ietf.org/html.charters/old/snmp-charter.html IETF provides the RFC specifications for the SNMP v1 protocol at this location. Simple Network Management Protocol version 2 specification. http://www.ietf.org/html.charters/old/snmpv2-charter.html IETF provides the RFC specifications for the SNMP v2 protocol at this location. 1.2 Conventions, Terminology, and Notation The following table lists common terms and abbreviations used in this document. Table 1-1, Glossary Term IETF RAS RFC SNMP Definition Internet Engineering Task Force, see www.ietf.org Reliability, Availability, Serviceability Request For Comments, a series of documents used to specify feature content by IETF Simple Network Management Protocol 2
2. SNMP Package Installation and Configuration This chapter describes the installation and configuration of various SNMP packages, and additionally some test procedures used to validate that the SNMP package is installed and working correctly. Package Installation Package Configuration MIB file(s) associated with this package Sample snmpwalk command to test it, and sample snmpwalk output Sample trap test procedure, and sample trap output 2.1 Net-snmp Linux Package The net-snmp package is provided by an open-source project and is included with most Linux distributions. See http://www.net-snmp.com for more details on the net-snmp project. Usually it is installed by default with most Linux distributions, except perhaps the snmp utilities. To install the net-snmp software, insert the Linux distribution media, and install the following rpms: rpm -i net-snmp-<version>*.rpm rpm -i net-snmp-libs-<version>*.rpm rpm -i net-snmp-utils-<version>*.rpm To configure net-snmp software for a sample test environment, the /etc/snmp/snmpd.conf file should be modified as follows: Add a line of the form view all included.1, and Modify the access line to something like this: access notconfiggroup any noauth exact all all all. Add a line for the trap destination, something like trapsink localhost public where localhost is the destination, or trap2sink localhost public for snmp v2. MIB files (installed into /usr/share/snmp/mibs): AGENTX-MIB.txt DISMAN-SCHEDULE-MIB.txt DISMAN-SCRIPT-MIB.txt EtherLike-MIB.txt HCNUM-TC.txt HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt IANA-ADDRESS-FAMILY-NUMBERS- MIB.txt IANA-LANGUAGE-MIB.txt IANAifType-MIB.txt IF-INVERTED-STACK-MIB.txt IF-MIB.txt INET-ADDRESS-MIB.txt IP-FORWARD-MIB.txt IP-MIB.txt IPV6-ICMP-MIB.txt IPV6-MIB.txt RFC-1215.txt RFC1155-SMI.txt RFC1213-MIB.txt RMON-MIB.txt SMUX-MIB.txt SNMP-COMMUNITY-MIB.txt SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt SNMP-TARGET-MIB.txt SNMP-USER-BASED-SM-MIB.txt SNMP-USM-AES-MIB.txt SNMP-VIEW-BASED-ACM-MIB.txt SNMPv2-CONF.txt SNMPv2-MIB.txt SNMPv2-SMI.txt SNMPv2-TC.txt 3
IPV6-TC.txt IPV6-TCP-MIB.txt IPV6-UDP-MIB.txt LM-SENSORS-MIB.txt NET-SNMP-AGENT-MIB.txt NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-MIB.txt NET-SNMP-TC.txt NOTIFICATION-LOG-MIB.txt SNMPv2-TM.txt TCP-MIB.txt UCD-DEMO-MIB.txt UCD-DISKIO-MIB.txt UCD-DLMOD-MIB.txt UCD-IPFWACC-MIB.txt UCD-SNMP-MIB.txt UDP-MIB.txt Sample snmpwalk: # snmpwalk v1 c public localhost.1 See Appendix A for sample net-snmp snmpwalk output Sample trap procedure: Reboot the system or restart snmpd via /etc/init.d/snmp restart. Then, the following sample trap messages would appear in the Linux syslog. Jan 13 04:03:03 aspenhill2 snmptrapd[6698]: 2008-01-13 04:03:03 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (14) 0:00:00.14 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2- MIB::coldStart SNMPv2-MIB::snmpTrapEnterprise.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 Jan 13 04:03:03 aspenhill2 snmpd[8168]: NET-SNMP version 5.1.2 Jan 14 12:34:11 aspenhill2 snmpd[8168]: Received TERM or STOP signal... shutting down... Jan 14 12:34:11 aspenhill2 snmptrapd[6698]: 2008-01-14 12:34:11 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (11706827) 1 day, 8:31:08.27 SNMPv2-MIB::snmpTrapOID.0 = OID: NET-SNMP-AGENT-MIB::nsNotifyShutdown 2.2 MS Windows SNMP Package This SNMP package is provided by Microsoft with the Windows Server OS (e.g. Windows 2003 Server). It is not always installed by default when the Windows OS is installed, but can be added later. To install the Windows SNMP Service, start the Control Panel, click Add Windows Components, Management & Monitoring, then SNMP. It may then prompt the user for the Windows Server CD in order to install the SNMP software. Usually the following steps are desirable to configure a default community and test the SNMP Service: From Control Panel, select Services, then SNMP, and Properties. Then select the Security tab, and Add Community to add the public community with READ WRITE privilege. Click Accept SNMP packets from any host also. Under the Traps tab, set Community to public and set the Trap destination to the IP address of your enterprise management station. This is for a sample test configuration and other enterprises could have other parameters configured. See http://msdn2.microsoft.com/en-us/library/aa379100(vs.85).aspx for Microsoft SNMP Service documentation. 4
Intel SNMP Software Overview MIB files: See http://msdn2.microsoft.com/en-us/library/aa379157(vs.85).aspx for Microsoft MIBs, which include: DHCP.MIB, HOSTMIB.MIB, LMMIB2.MIB, MIB_II.MIB, WINS.MIB. Sample snmpwalk: Sample trap procedure:. 2.3 SNMPSA-AH Package The SNMPSA-AH package is provided by Intel and is used on systems with S3000AH motherboards to provide information about the baseboard features. SNMPSA-AH provides baseboard sensor status for Temperature, Fan, and Voltage sensors, and traps for sensor threshold events. It also provides Intel AMT configuration information, such as the AMT Firmware version and AMT IP address. 2.3.1 SNMPSA-AH Linux Package Perform the following steps to install the snmpsa-ah rpm: rpm -i snmpsa-ah*.rpm This will install an snmpsa-ah service startup script at /etc/init.d/snmpsa-ah. This script ensures that the i2c-i801 and i2c-dev modules are loaded prior to starting the snmpsa-ah service. Note that the rpm installation also adds the line master agentx to the /etc/snmp/snmpd.conf configuration file for the Linux net-snmp service. MIB files: /usr/local/snmpsa-ah/mib/basebrd6.mib Sample snmpwalk: # snmpwalk v1 c public m usr/local/snmpsa-ah/mib/basebrd6.mib localhost enterprises.343 See Appendix C for sample snmpsa-ah snmpwalk output. Sample trap procedure: Remove the unit cover and apply heat, or physically stop one of the fans, usually by removing the cover of the unit and unplugging it from the baseboard. It takes 60 seconds for SNMPSA-AH to register the failure. Then, the following SNMP trap messages will appear in the Linux syslog (/var/log/messages), assuming that snmptrapd is running, and /etc/snmp/snmpd.conf includes trapsink localhost. Jan 11 07:13:52 aspenhill2 snmpd[7096]: Received SNMP packet(s) from 127.0.0.1 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156114) 3:12:41.14 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.50.10 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 7 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "Vccp sensor voltage crossed lower critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11809 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156115) 3:12:41.15 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.50.10 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 7 SNMPv2-5
SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "VCC sensor voltage crossed lower critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11810 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156115) 3:12:41.15 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.50.12 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 8 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "1.5V sensor voltage crossed upper critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11811 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156116) 3:12:41.16 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.50.10 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 7 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "VTR sensor voltage crossed lower critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11929 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156117) 3:12:41.17 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.70.12 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 8 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "CPU Thermal Margin sensor temperature crossed upper critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11808 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156118) 3:12:41.18 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.70.12 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 8 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "Baseboard Temperature sensor temperature crossed upper critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11809 Jan 11 07:14:43 aspenhill2 snmptrapd[6698]: 2008-01-11 07:14:43 localhost.localdomain [127.0.0.1]: SNMPv2-MIB::sysUpTime.0 = Timeticks: (1156118) 3:12:41.18 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.6.1000.70.12 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.2 = INTEGER: 8 SNMPv2- SMI::enterprises.343.2.10.3.6.1000.10.1 = STRING: "DIMM Temperature sensor temperature crossed upper critical threshold" SNMPv2-SMI::enterprises.343.2.10.3.6.1000.10.3 = INTEGER: 11810 2.3.2 SNMPSA-AH Windows Package Perform the following steps to install the snmpsa-ah MSI setup. start SNMPSA-AH*.MSI This will install the snmpsa-ah subagent and its registry components to be invoked by the Windows SNMP Service when it starts. MIB files: basebrd6.mib (included with SNMPSA-AH package) Sample snmpwalk: Windows does not include an snmpwalk utility, so if snmpwalk is run from a remote Linux system, it would be of the form: # snmpwalk v1 c public m usr/local/snmpsa-ah/mib/basebrd6.mib node1 enterprises.343 And the snmpwalk results would be the same as from a Linux target node, see Appendix C for sample snmpsa-ah snmpwalk output. Sample trap procedure: 6
Intel SNMP Software Overview Remove the unit cover and apply heat, or physically stop one of the fans, usually by removing the cover of the unit and unplugging it from the baseboard. It takes 60 seconds for SNMPSA-AH to register the failure. If the SNMP Service is configured for a Linux trap destination, the traps would be seen there in /var/log/messages as shown in section 2.3.1. If the SNMP Service is configured with a localhost destination, a third party trap receiver is required in order to see the traps. One such product is MG- SOFT Trap Ringer. Below is a sample CSV-exported trap output from MG-SOFT. "04/16/08 13:52:39","127.0.0.1","public","N/A","IP/UDP","SNMPv2c","sysUpTime.0 TimeTicks 7 days 02h:36m:16s.73th","snmpTrapOID.0 OBJECT IDENTIFIER internet.4.1.1315.78.1.1.0","internet.4.1.1315.78.1.2.0 octet string MG-SOFT Trap Ringer Pro Default Trap Port Verification Trap","internet.4.1.1315.78.1.3.0 octet string Verification trap can be disabled in Trap Ringer Preferences.","snmpTrapEnterprise.0 OBJECT IDENTIFIER internet.4.1.1315" "04/16/08 13:54:01","10.243.42.227","public","N/A","IP/UDP","SNMPv1","sysUpTime.0 TimeTicks 0 days 00h:18m:00s.25th","snmpTrapOID.0 OBJECT IDENTIFIER internet.4.1.343.2.10.3.6.1000.70.1.0.1","internet.4.1.343.2.10.3.6.1000.10.1.0 octet string Fan 2 sensor value is below lower critical threshold","internet.4.1.343.2.10.3.6.1000.10.2.0 integer 7","internet.4.1.343.2.10.3.6.1000.10.3.0 integer 11818","snmpTrapEnterprise.0 OBJECT IDENTIFIER internet.4.1.343.2.10.3.6.1000.70.1" "04/16/08 13:55:01","10.243.42.227","public","N/A","IP/UDP","SNMPv1","sysUpTime.0 TimeTicks 0 days 00h:19m:00s.25th","snmpTrapOID.0 OBJECT IDENTIFIER internet.4.1.343.2.10.3.6.1000.70.1.0.1","internet.4.1.343.2.10.3.6.1000.10.1.0 octet string Fan 2 sensor value is below lower critical threshold","internet.4.1.343.2.10.3.6.1000.10.2.0 integer 7","internet.4.1.343.2.10.3.6.1000.10.3.0 integer 11818","snmpTrapEnterprise.0 OBJECT IDENTIFIER internet.4.1.343.2.10.3.6.1000.70.1" "04/16/08 13:56:01","10.243.42.227","public","N/A","IP/UDP","SNMPv1","sysUpTime.0 TimeTicks 0 days 00h:20m:00s.25th","snmpTrapOID.0 OBJECT IDENTIFIER internet.4.1.343.2.10.3.6.1000.70.2.0.1","internet.4.1.343.2.10.3.6.1000.10.1.0 octet string Fan 2 sensor value is OK","internet.4.1.343.2.10.3.6.1000.10.2.0 integer 3","internet.4.1.343.2.10.3.6.1000.10.3.0 integer 11818","snmpTrapEnterprise.0 OBJECT IDENTIFIER internet.4.1.343.2.10.3.6.1000.70.2" 2.4 IDE SW-RAID SNMP Package The IDE Software RAID SNMP package is provided by LSI and is used on platforms that have SATA IDE controllers, such as the SR150AH platforms using the S3000AH motherboard. It provides RAID status information and traps for RAID events. The LSI IDE SW RAID driver is named megaide on the SR1530AH platforms, and is a prerequisite for this package. 7
2.4.1 IDE SW-RAID SNMP Linux Package The package is distributed in an IDE_SWR_Linux_*.zip archive, including its documentation, and the swraid_snmp-3*.rpm. The mib filename is LSIRAID-IDE.mib. 2.4.2 IDE SW-RAID SNMP Windows Package This package is distributed in an IDE_SWRaid_SNMP_*.zip archive, including its documentation, and the SNMPAgnt.msi. The mib filename is LSIRAID-IDE.mib. 2.5 SNMPSA Package The SNMPSA package is provided by Kontron CRMS and is used on systems with IPMI-based motherboards to provide information about the baseboard features. SNMPSA provides baseboard sensor status for Temperature, Fan, Voltage, and other sensors, and traps for sensor threshold events. It also provides IPMI configuration information and traps for other IPMI events. 2.5.1 SNMPSA Linux Package Perform the following steps to install the snmpsa rpm: rpm -i snmpsa-*.rpm This will install an snmpsa service startup script at /etc/init.d/snmpsa. This script ensures that the IPMI driver (with /dev/imb support) is loaded prior to starting snmpsa. Note that the rpm installation also adds the line master agentx to the /etc/snmp/snmpd.conf configuration file for the Linux netsnmp service. MIB files: /usr/local/snmpsa/mibs/basebrd5.mib Sample snmpwalk: # snmpwalk v1 c public m usr/local/snmpsa/mib/basebrd5.mib localhost enterprises.343 See Appendix E for sample snmpwalk output for snmpsa. Sample SNMPSA trap procedure: Use test/ipmievt.sh from the ipmiutil source tree to generate temperature threshold events (see http://ipmiutil.svn.sourceforge.net/viewvc/ipmiutil/trunk/test/ipmievt.sh?view=markup), or Pull one of the redundant power supplies for power supply events. Then, the following sample trap messages should appear in the Linux syslog. (snmpd start trap) Oct 25 17:22:13 telco4wd snmptrapd[3581]: 2007-10-25 17:22:13 <UNKNOWN> [UDP: [10.243.42.2]:32770]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (11) 0:00:00.11 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-MIB::coldStart SNMPv2-MIB::snmpTrapEnterprise.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 (SNMPSA Power Redundancy Lost trap) 8
Intel SNMP Software Overview Oct 25 17:23:25 telco4wd snmptrapd[3581]: 2007-10-25 17:23:25 <UNKNOWN> [UDP: [10.243.42.2]:32770]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (7160) 0:01:11.60 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.5.1000.50.3 SNMPv2-SMI::enterprises.343.2.10.3.5.1000.10.1.0.0 = STRING: "Redundancy Lost" SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.5.1 = INTEGER: 5 SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.3.1 = STRING: "Power Redundancy" SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.2.1 = INTEGER: 139264 (IPMI PEF Power Redundancy Lost trap) Oct 25 17:23:28 telco4wd snmptrapd[3581]: 2007-10-25 17:23:28 <UNKNOWN> [UDP: [10.243.42.2]:32770]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (7461) 0:01:14.61 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.5.1000.50.3 SNMPv2-SMI::enterprises.343.2.10.3.5.1000.10.1.0.0 = Hex-STRING: 53 74 61 74 65 20 63 68 61 6E 67 65 64 20 66 72 6F 6D 20 46 75 6C 6C 20 6F 72 20 44 65 67 72 61 64 65 64 20 52 65 64 75 6E 64 61 6E 63 79 20 74 6F 20 4E 6F 6E 2D 52 65 64 75 6E 64 75 6E 63 79 20 77 69 74 68 20 53 75 66 66 69 63 69 65 6E 74 05 SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.5.1936020000 = INTEGER: 5 SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.3.1936020000 = STRING: "Power Redundancy" SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.2.1936020000 = INTEGER: 1668445551 (SNMPSA PS2 Not Present) Oct 25 17:23:31 telco4wd snmptrapd[3581]: 2007-10-25 17:23:31 <UNKNOWN> [UDP: [10.243.42.2]:32770]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (7761) 0:01:17.61 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.5.1000.50.5 SNMPv2-SMI::enterprises.343.2.10.3.5.1000.10.1.0.0 = STRING: "Presence Not Detected" SNMPv2-SMI::enterprises.343.2.10.3.5.400.20.1.5.2 = INTEGER: 3 SNMPv2-SMI::enterprises.343.2.10.3.5.400.20.1.3.2 = STRING: "PS2 Status" SNMPv2-SMI::enterprises.343.2.10.3.5.400.20.1.2.2 = INTEGER: 7413760 (SNMPSA PS2 Present - inserted) Oct 25 17:24:52 telco4wd snmptrapd[3581]: 2007-10-25 17:24:52 <UNKNOWN> [UDP: [10.243.42.2]:32770]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (15876) 0:02:38.76 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.5.1000.50.4 SNMPv2-SMI::enterprises.343.2.10.3.5.1000.10.1.0.0 = STRING: "Presence Detected" SNMPv2-SMI::enterprises.343.2.10.3.5.400.20.1.5.2 = INTEGER: 3 SNMPv2-SMI::enterprises.343.2.10.3.5.400.20.1.3.2 = STRING: "PS2 Status" SNMPv2-SMI::enterprises.343.2.10.3.5.400.20.1.2.2 = INTEGER: 7413760 (SNMPSA Power Full Redundancy) Oct 25 17:24:55 telco4wd snmptrapd[3581]: 2007-10-25 17:24:55 <UNKNOWN> [UDP: [10.243.42.2]:32770]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (16176) 0:02:41.76 SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.343.2.10.3.5.1000.50.1 SNMPv2-SMI::enterprises.343.2.10.3.5.1000.10.1.0.0 = STRING: "Full Redundancy" SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.5.1 = INTEGER: 3 SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.3.1 = STRING: "Power Redundancy" SNMPv2-SMI::enterprises.343.2.10.3.5.400.10.1.2.1 = INTEGER: 139264 2.5.2 SNMPSA Windows Package 9
2.6 SAS SW-RAID SNMP Package The SAS Software RAID SNMP package is provided by LSI and is used on platforms that have SAS SCSI controllers with a RAID OpRom, such as the NSC2U platforms using the S5000 motherboard. It provides RAID status information and traps for RAID events. It is named megasr on the S5000 platforms. SAS HW-RAID Linux Package: sas_ir_snmp-3.*.rpm SAS HW-RAID Windows Package: SAS_IR_SNMP_Win_*.zip (with SNMPAgnt.msi) 2.6.1 SAS SW-RAID SNMP Linux Package 2.6.2 SAS SW-RAID SNMP Windows Package 2.7 LSI SCSI SNMP Package The SAS SNMP package is provided by LSI and is used on platforms that have LSI MPT SCSI controllers, such as the NSC2U platforms using the S5000 motherboard. It provides SCSI disk status information and traps for SCSI events. It is named scsi-snmp on the S5000 platforms. 2.8 Intel NIC SNMP Package The Intel NIC SNMP Package supplies NIC status and configuration information. For current Linux distributions, net-snmp includes this information. However, for Windows, the Intel NIC SNMP package (PSNMP32) should be installed. 3. Firmware SNMP Features There are some SNMP features that are provided by firmware as well. For the BMC IPMI firmware, it provides IPMI Platform Event Traps via SNMP, and the optional RMM2 module provides some firmware SNMP gets and traps also. 3.1 BMC IPMI SNMP Features The BMC IPMI firmware provides Platform Event Filter (PEF) rules which can be enabled to send SNMP v1 traps when certain IPMI events occur. The IPMI PEF rules and alert destination can be configured with the ipmiutil package, which supports several OSs. See http://ipmiutil.sourceforge.net for documentation, source and binaries. MIB files: /usr/share/ipmiutil/bmclanpet.mib 10
Intel SNMP Software Overview 3.2 RMM2 SNMP Features The firmware on the optional RMM2 module provides certain RMM2 module inventory information via SNMP gets and certain RMM2 events can also be sent via SNMP v1 traps. MIB files: rmm2.mib (downloadable from the RMM2 module s web interface) 11
Appendix A net-snmp snmpwalk output SNMPv2-MIB::sysDescr.0 = STRING: Linux aspenhill2 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 SNMPv2-MIB::sysUpTime.0 = Timeticks: (1782) 0:00:17.82 SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmp.local.conf) SNMPv2-MIB::sysName.0 = STRING: aspenhill2 SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf) SNMPv2-MIB::sysORLastChange.0 = Timeticks: (2) 0:00:00.02 SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup SNMPv2-MIB::sysORID.7 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic objects for network interface sublayers SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP implementations SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and ICMP implementations SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP implementations SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for SNMP. SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB. SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and Dispatching. SNMPv2-MIB::sysORDescr.9 = STRING: The management information definitions for the SNMP User-based Security Model. SNMPv2-MIB::sysORUpTime.1 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (2) 0:00:00.02 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (2) 0:00:00.02 SNMPv2-MIB::sysORUpTime.9 = Timeticks: (2) 0:00:00.02 IF-MIB::ifNumber.0 = INTEGER: 4 IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: sit0 IF-MIB::ifType.1 = INTEGER: softwareloopback(24) IF-MIB::ifType.2 = INTEGER: ethernetcsmacd(6) IF-MIB::ifType.3 = INTEGER: ethernetcsmacd(6) IF-MIB::ifType.4 = INTEGER: tunnel(131) IF-MIB::ifMtu.1 = INTEGER: 16436 IF-MIB::ifMtu.2 = INTEGER: 1500 IF-MIB::ifMtu.3 = INTEGER: 1500 IF-MIB::ifMtu.4 = INTEGER: 1480 IF-MIB::ifSpeed.1 = Gauge32: 10000000 IF-MIB::ifSpeed.2 = Gauge32: 1000000000 IF-MIB::ifSpeed.3 = Gauge32: 0 12
Intel SNMP Software Overview IF-MIB::ifSpeed.4 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: IF-MIB::ifPhysAddress.2 = STRING: 0:15:17:21:67:36 IF-MIB::ifPhysAddress.3 = STRING: 0:15:17:21:67:37 IF-MIB::ifPhysAddress.4 = STRING: IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifAdminStatus.2 = INTEGER: up(1) IF-MIB::ifAdminStatus.3 = INTEGER: down(2) IF-MIB::ifAdminStatus.4 = INTEGER: down(2) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: down(2) IF-MIB::ifOperStatus.4 = INTEGER: down(2) IF-MIB::ifInOctets.1 = Counter32: 12571 IF-MIB::ifInOctets.2 = Counter32: 23510183 IF-MIB::ifInOctets.3 = Counter32: 0 IF-MIB::ifInOctets.4 = Counter32: 0 IF-MIB::ifInUcastPkts.1 = Counter32: 169 IF-MIB::ifInUcastPkts.2 = Counter32: 365549 IF-MIB::ifInUcastPkts.3 = Counter32: 0 IF-MIB::ifInUcastPkts.4 = Counter32: 0 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInDiscards.2 = Counter32: 0 IF-MIB::ifInDiscards.3 = Counter32: 0 IF-MIB::ifInDiscards.4 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInErrors.2 = Counter32: 0 IF-MIB::ifInErrors.3 = Counter32: 0 IF-MIB::ifInErrors.4 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 14930 IF-MIB::ifOutOctets.2 = Counter32: 9126 IF-MIB::ifOutOctets.3 = Counter32: 0 IF-MIB::ifOutOctets.4 = Counter32: 0 IF-MIB::ifOutUcastPkts.1 = Counter32: 201 IF-MIB::ifOutUcastPkts.2 = Counter32: 67 IF-MIB::ifOutUcastPkts.3 = Counter32: 0 IF-MIB::ifOutUcastPkts.4 = Counter32: 0 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutDiscards.2 = Counter32: 0 IF-MIB::ifOutDiscards.3 = Counter32: 0 IF-MIB::ifOutDiscards.4 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutErrors.2 = Counter32: 0 IF-MIB::ifOutErrors.3 = Counter32: 0 IF-MIB::ifOutErrors.4 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 0 IF-MIB::ifOutQLen.2 = Gauge32: 0 IF-MIB::ifOutQLen.3 = Gauge32: 0 IF-MIB::ifOutQLen.4 = Gauge32: 0 IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero RFC1213-MIB::atIfIndex.2.1.10.243.42.218 = INTEGER: 2 RFC1213-MIB::atPhysAddress.2.1.10.243.42.218 = Hex-STRING: 00 07 E9 06 17 62 RFC1213-MIB::atNetAddress.2.1.10.243.42.218 = Network Address: 0A:F3:2A:DA IP-MIB::ipForwarding.0 = INTEGER: notforwarding(2) IP-MIB::ipDefaultTTL.0 = INTEGER: 64 IP-MIB::ipInReceives.0 = Counter32: 1482 IP-MIB::ipInHdrErrors.0 = Counter32: 0 13
IP-MIB::ipInAddrErrors.0 = Counter32: 0 IP-MIB::ipForwDatagrams.0 = Counter32: 0 IP-MIB::ipInUnknownProtos.0 = Counter32: 0 IP-MIB::ipInDiscards.0 = Counter32: 0 IP-MIB::ipInDelivers.0 = Counter32: 1482 IP-MIB::ipOutRequests.0 = Counter32: 303 IP-MIB::ipOutDiscards.0 = Counter32: 0 IP-MIB::ipOutNoRoutes.0 = Counter32: 0 IP-MIB::ipReasmTimeout.0 = INTEGER: 0 IP-MIB::ipReasmReqds.0 = Counter32: 0 IP-MIB::ipReasmOKs.0 = Counter32: 0 IP-MIB::ipReasmFails.0 = Counter32: 0 IP-MIB::ipFragOKs.0 = Counter32: 0 IP-MIB::ipFragFails.0 = Counter32: 0 IP-MIB::ipFragCreates.0 = Counter32: 0 IP-MIB::ipAdEntAddr.10.243.42.227 = IpAddress: 10.243.42.227 IP-MIB::ipAdEntAddr.127.0.0.1 = IpAddress: 127.0.0.1 IP-MIB::ipAdEntIfIndex.10.243.42.227 = INTEGER: 2 IP-MIB::ipAdEntIfIndex.127.0.0.1 = INTEGER: 1 IP-MIB::ipAdEntNetMask.10.243.42.227 = IpAddress: 255.255.255.0 IP-MIB::ipAdEntNetMask.127.0.0.1 = IpAddress: 255.0.0.0 IP-MIB::ipAdEntBcastAddr.10.243.42.227 = INTEGER: 1 IP-MIB::ipAdEntBcastAddr.127.0.0.1 = INTEGER: 1 RFC1213-MIB::ipRouteDest.0.0.0.0 = IpAddress: 0.0.0.0 RFC1213-MIB::ipRouteDest.10.243.42.0 = IpAddress: 10.243.42.0 RFC1213-MIB::ipRouteDest.169.254.0.0 = IpAddress: 169.254.0.0 RFC1213-MIB::ipRouteIfIndex.0.0.0.0 = INTEGER: 2 RFC1213-MIB::ipRouteIfIndex.10.243.42.0 = INTEGER: 2 RFC1213-MIB::ipRouteIfIndex.169.254.0.0 = INTEGER: 2 RFC1213-MIB::ipRouteMetric1.0.0.0.0 = INTEGER: 1 RFC1213-MIB::ipRouteMetric1.10.243.42.0 = INTEGER: 0 RFC1213-MIB::ipRouteMetric1.169.254.0.0 = INTEGER: 0 RFC1213-MIB::ipRouteNextHop.0.0.0.0 = IpAddress: 10.243.42.251 RFC1213-MIB::ipRouteNextHop.10.243.42.0 = IpAddress: 0.0.0.0 RFC1213-MIB::ipRouteNextHop.169.254.0.0 = IpAddress: 0.0.0.0 RFC1213-MIB::ipRouteType.0.0.0.0 = INTEGER: indirect(4) RFC1213-MIB::ipRouteType.10.243.42.0 = INTEGER: direct(3) RFC1213-MIB::ipRouteType.169.254.0.0 = INTEGER: direct(3) RFC1213-MIB::ipRouteProto.0.0.0.0 = INTEGER: local(2) RFC1213-MIB::ipRouteProto.10.243.42.0 = INTEGER: local(2) RFC1213-MIB::ipRouteProto.169.254.0.0 = INTEGER: local(2) RFC1213-MIB::ipRouteMask.0.0.0.0 = IpAddress: 0.0.0.0 RFC1213-MIB::ipRouteMask.10.243.42.0 = IpAddress: 255.255.255.0 RFC1213-MIB::ipRouteMask.169.254.0.0 = IpAddress: 255.255.0.0 RFC1213-MIB::ipRouteInfo.0.0.0.0 = OID: SNMPv2-SMI::zeroDotZero RFC1213-MIB::ipRouteInfo.10.243.42.0 = OID: SNMPv2-SMI::zeroDotZero RFC1213-MIB::ipRouteInfo.169.254.0.0 = OID: SNMPv2-SMI::zeroDotZero IP-MIB::ipNetToMediaIfIndex.2.10.243.42.218 = INTEGER: 2 IP-MIB::ipNetToMediaPhysAddress.2.10.243.42.218 = STRING: 0:7:e9:6:17:62 IP-MIB::ipNetToMediaNetAddress.2.10.243.42.218 = IpAddress: 10.243.42.218 IP-MIB::ipNetToMediaType.2.10.243.42.218 = INTEGER: dynamic(3) IP-MIB::ipRoutingDiscards.0 = Counter32: 0 IP-MIB::icmpInMsgs.0 = Counter32: 7 IP-MIB::icmpInErrors.0 = Counter32: 0 IP-MIB::icmpInDestUnreachs.0 = Counter32: 7 IP-MIB::icmpInTimeExcds.0 = Counter32: 0 IP-MIB::icmpInParmProbs.0 = Counter32: 0 IP-MIB::icmpInSrcQuenchs.0 = Counter32: 0 IP-MIB::icmpInRedirects.0 = Counter32: 0 IP-MIB::icmpInEchos.0 = Counter32: 0 14
Intel SNMP Software Overview IP-MIB::icmpInEchoReps.0 = Counter32: 0 IP-MIB::icmpInTimestamps.0 = Counter32: 0 IP-MIB::icmpInTimestampReps.0 = Counter32: 0 IP-MIB::icmpInAddrMasks.0 = Counter32: 0 IP-MIB::icmpInAddrMaskReps.0 = Counter32: 0 IP-MIB::icmpOutMsgs.0 = Counter32: 7 IP-MIB::icmpOutErrors.0 = Counter32: 0 IP-MIB::icmpOutDestUnreachs.0 = Counter32: 7 IP-MIB::icmpOutTimeExcds.0 = Counter32: 0 IP-MIB::icmpOutParmProbs.0 = Counter32: 0 IP-MIB::icmpOutSrcQuenchs.0 = Counter32: 0 IP-MIB::icmpOutRedirects.0 = Counter32: 0 IP-MIB::icmpOutEchos.0 = Counter32: 0 IP-MIB::icmpOutEchoReps.0 = Counter32: 0 IP-MIB::icmpOutTimestamps.0 = Counter32: 0 IP-MIB::icmpOutTimestampReps.0 = Counter32: 0 IP-MIB::icmpOutAddrMasks.0 = Counter32: 0 IP-MIB::icmpOutAddrMaskReps.0 = Counter32: 0 TCP-MIB::tcpRtoAlgorithm.0 = INTEGER: other(1) TCP-MIB::tcpRtoMin.0 = INTEGER: 200 milliseconds TCP-MIB::tcpRtoMax.0 = INTEGER: 120000 milliseconds TCP-MIB::tcpMaxConn.0 = INTEGER: -1 TCP-MIB::tcpActiveOpens.0 = Counter32: 2 TCP-MIB::tcpPassiveOpens.0 = Counter32: 2 TCP-MIB::tcpAttemptFails.0 = Counter32: 0 TCP-MIB::tcpEstabResets.0 = Counter32: 0 TCP-MIB::tcpCurrEstab.0 = Gauge32: 1 TCP-MIB::tcpInSegs.0 = Counter32: 82 TCP-MIB::tcpOutSegs.0 = Counter32: 60 TCP-MIB::tcpRetransSegs.0 = Counter32: 0 TCP-MIB::tcpConnState.0.0.0.0.23.0.0.0.0.0 = INTEGER: listen(2) TCP-MIB::tcpConnState.0.0.0.0.111.0.0.0.0.0 = INTEGER: listen(2) TCP-MIB::tcpConnState.0.0.0.0.199.0.0.0.0.0 = INTEGER: listen(2) TCP-MIB::tcpConnState.0.0.0.0.791.0.0.0.0.0 = INTEGER: listen(2) TCP-MIB::tcpConnLocalAddress.0.0.0.0.23.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnLocalAddress.0.0.0.0.111.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnLocalAddress.0.0.0.0.199.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnLocalAddress.0.0.0.0.791.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnLocalPort.0.0.0.0.23.0.0.0.0.0 = INTEGER: 23 TCP-MIB::tcpConnLocalPort.0.0.0.0.111.0.0.0.0.0 = INTEGER: 111 TCP-MIB::tcpConnLocalPort.0.0.0.0.199.0.0.0.0.0 = INTEGER: 199 TCP-MIB::tcpConnLocalPort.0.0.0.0.791.0.0.0.0.0 = INTEGER: 791 TCP-MIB::tcpConnRemAddress.0.0.0.0.23.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnRemAddress.0.0.0.0.111.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnRemAddress.0.0.0.0.199.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnRemAddress.0.0.0.0.791.0.0.0.0.0 = IpAddress: 0.0.0.0 TCP-MIB::tcpConnRemPort.0.0.0.0.23.0.0.0.0.0 = INTEGER: 0 TCP-MIB::tcpConnRemPort.0.0.0.0.111.0.0.0.0.0 = INTEGER: 0 TCP-MIB::tcpConnRemPort.0.0.0.0.199.0.0.0.0.0 = INTEGER: 0 TCP-MIB::tcpConnRemPort.0.0.0.0.791.0.0.0.0.0 = INTEGER: 0 TCP-MIB::tcpInErrs.0 = Counter32: 0 TCP-MIB::tcpOutRsts.0 = Counter32: 3 UDP-MIB::udpInDatagrams.0 = Counter32: 461 UDP-MIB::udpNoPorts.0 = Counter32: 7 UDP-MIB::udpInErrors.0 = Counter32: 0 UDP-MIB::udpOutDatagrams.0 = Counter32: 468 UDP-MIB::udpLocalAddress.0.0.0.0.111 = IpAddress: 0.0.0.0 UDP-MIB::udpLocalAddress.0.0.0.0.161 = IpAddress: 0.0.0.0 UDP-MIB::udpLocalAddress.0.0.0.0.785 = IpAddress: 0.0.0.0 UDP-MIB::udpLocalAddress.0.0.0.0.788 = IpAddress: 0.0.0.0 15
UDP-MIB::udpLocalAddress.0.0.0.0.32768 = IpAddress: 0.0.0.0 UDP-MIB::udpLocalAddress.0.0.0.0.32769 = IpAddress: 0.0.0.0 UDP-MIB::udpLocalPort.0.0.0.0.111 = INTEGER: 111 UDP-MIB::udpLocalPort.0.0.0.0.161 = INTEGER: 161 UDP-MIB::udpLocalPort.0.0.0.0.785 = INTEGER: 785 UDP-MIB::udpLocalPort.0.0.0.0.788 = INTEGER: 788 UDP-MIB::udpLocalPort.0.0.0.0.32768 = INTEGER: 32768 UDP-MIB::udpLocalPort.0.0.0.0.32769 = INTEGER: 32769 SNMPv2-MIB::snmpInPkts.0 = Counter32: 243 SNMPv2-MIB::snmpOutPkts.0 = Counter32: 244 SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0 SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0 SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0 SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0 SNMPv2-MIB::snmpInTooBigs.0 = Counter32: 0 SNMPv2-MIB::snmpInNoSuchNames.0 = Counter32: 0 SNMPv2-MIB::snmpInBadValues.0 = Counter32: 0 SNMPv2-MIB::snmpInReadOnlys.0 = Counter32: 0 SNMPv2-MIB::snmpInGenErrs.0 = Counter32: 0 SNMPv2-MIB::snmpInTotalReqVars.0 = Counter32: 253 SNMPv2-MIB::snmpInTotalSetVars.0 = Counter32: 0 SNMPv2-MIB::snmpInGetRequests.0 = Counter32: 0 SNMPv2-MIB::snmpInGetNexts.0 = Counter32: 257 SNMPv2-MIB::snmpInSetRequests.0 = Counter32: 0 SNMPv2-MIB::snmpInGetResponses.0 = Counter32: 0 SNMPv2-MIB::snmpInTraps.0 = Counter32: 0 SNMPv2-MIB::snmpOutTooBigs.0 = Counter32: 0 SNMPv2-MIB::snmpOutNoSuchNames.0 = Counter32: 0 SNMPv2-MIB::snmpOutBadValues.0 = Counter32: 0 SNMPv2-MIB::snmpOutGenErrs.0 = Counter32: 0 SNMPv2-MIB::snmpOutGetRequests.0 = Counter32: 0 SNMPv2-MIB::snmpOutGetNexts.0 = Counter32: 0 SNMPv2-MIB::snmpOutSetRequests.0 = Counter32: 0 SNMPv2-MIB::snmpOutGetResponses.0 = Counter32: 267 SNMPv2-MIB::snmpOutTraps.0 = Counter32: 1 SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2) SNMPv2-MIB::snmpSilentDrops.0 = Counter32: 0 SNMPv2-MIB::snmpProxyDrops.0 = Counter32: 0 HOST-RESOURCES-MIB::hrSystemUptime.0 = Timeticks: (1454712) 4:02:27.12 HOST-RESOURCES-MIB::hrSystemDate.0 = STRING: 2008-1-21,11:46:4.0,-5:0 HOST-RESOURCES-MIB::hrSystemInitialLoadDevice.0 = INTEGER: 1536 HOST-RESOURCES-MIB::hrSystemInitialLoadParameters.0 = STRING: "ro root=/dev/sda5 console=tty0 console=ttys1 " HOST-RESOURCES-MIB::hrSystemNumUsers.0 = Gauge32: 5 HOST-RESOURCES-MIB::hrSystemProcesses.0 = Gauge32: 87 HOST-RESOURCES-MIB::hrSystemMaxProcesses.0 = INTEGER: 0 HOST-RESOURCES-MIB::hrMemorySize.0 = INTEGER: 2069076 KBytes HOST-RESOURCES-MIB::hrStorageIndex.1 = INTEGER: 1 HOST-RESOURCES-MIB::hrStorageIndex.2 = INTEGER: 2 HOST-RESOURCES-MIB::hrStorageIndex.3 = INTEGER: 3 HOST-RESOURCES-MIB::hrStorageIndex.4 = INTEGER: 4 HOST-RESOURCES-MIB::hrStorageIndex.5 = INTEGER: 5 HOST-RESOURCES-MIB::hrStorageIndex.6 = INTEGER: 6 HOST-RESOURCES-MIB::hrStorageIndex.7 = INTEGER: 7 HOST-RESOURCES-MIB::hrStorageIndex.8 = INTEGER: 8 HOST-RESOURCES-MIB::hrStorageIndex.9 = INTEGER: 9 HOST-RESOURCES-MIB::hrStorageType.1 = OID: HOST-RESOURCES-TYPES::hrStorageOther HOST-RESOURCES-MIB::hrStorageType.2 = OID: HOST-RESOURCES-TYPES::hrStorageRam HOST-RESOURCES-MIB::hrStorageType.3 = OID: HOST-RESOURCES-TYPES::hrStorageVirtualMemory 16
Intel SNMP Software Overview HOST-RESOURCES-MIB::hrStorageType.4 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageType.5 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageType.6 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageType.7 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageType.8 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageType.9 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: Memory Buffers HOST-RESOURCES-MIB::hrStorageDescr.2 = STRING: Real Memory HOST-RESOURCES-MIB::hrStorageDescr.3 = STRING: Swap Space HOST-RESOURCES-MIB::hrStorageDescr.4 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.5 = STRING: /sys HOST-RESOURCES-MIB::hrStorageDescr.6 = STRING: /proc/bus/usb HOST-RESOURCES-MIB::hrStorageDescr.7 = STRING: /boot HOST-RESOURCES-MIB::hrStorageDescr.8 = STRING: /proc/sys/fs/binfmt_misc HOST-RESOURCES-MIB::hrStorageDescr.9 = STRING: /var/lib/nfs/rpc_pipefs HOST-RESOURCES-MIB::hrStorageAllocationUnits.1 = INTEGER: 1024 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.2 = INTEGER: 1024 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.3 = INTEGER: 1024 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.4 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.5 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.6 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.7 = INTEGER: 1024 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.8 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.9 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageSize.1 = INTEGER: 2069076 HOST-RESOURCES-MIB::hrStorageSize.2 = INTEGER: 2069076 HOST-RESOURCES-MIB::hrStorageSize.3 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageSize.4 = INTEGER: 2016068 HOST-RESOURCES-MIB::hrStorageSize.5 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageSize.6 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageSize.7 = INTEGER: 132206 HOST-RESOURCES-MIB::hrStorageSize.8 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageSize.9 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageUsed.1 = INTEGER: 28460 HOST-RESOURCES-MIB::hrStorageUsed.2 = INTEGER: 429136 HOST-RESOURCES-MIB::hrStorageUsed.3 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageUsed.4 = INTEGER: 754663 HOST-RESOURCES-MIB::hrStorageUsed.5 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageUsed.6 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageUsed.7 = INTEGER: 68074 HOST-RESOURCES-MIB::hrStorageUsed.8 = INTEGER: 0 HOST-RESOURCES-MIB::hrStorageUsed.9 = INTEGER: 0 HOST-RESOURCES-MIB::hrDeviceIndex.768 = INTEGER: 768 HOST-RESOURCES-MIB::hrDeviceIndex.769 = INTEGER: 769 HOST-RESOURCES-MIB::hrDeviceIndex.1025 = INTEGER: 1025 HOST-RESOURCES-MIB::hrDeviceIndex.1026 = INTEGER: 1026 HOST-RESOURCES-MIB::hrDeviceIndex.1027 = INTEGER: 1027 HOST-RESOURCES-MIB::hrDeviceIndex.1028 = INTEGER: 1028 HOST-RESOURCES-MIB::hrDeviceIndex.1536 = INTEGER: 1536 HOST-RESOURCES-MIB::hrDeviceIndex.1552 = INTEGER: 1552 HOST-RESOURCES-MIB::hrDeviceIndex.1553 = INTEGER: 1553 HOST-RESOURCES-MIB::hrDeviceIndex.3072 = INTEGER: 3072 HOST-RESOURCES-MIB::hrDeviceType.768 = OID: HOST-RESOURCES-TYPES::hrDeviceProcessor HOST-RESOURCES-MIB::hrDeviceType.769 = OID: HOST-RESOURCES-TYPES::hrDeviceProcessor HOST-RESOURCES-MIB::hrDeviceType.1025 = OID: HOST-RESOURCES-TYPES::hrDeviceNetwork HOST-RESOURCES-MIB::hrDeviceType.1026 = OID: HOST-RESOURCES-TYPES::hrDeviceNetwork HOST-RESOURCES-MIB::hrDeviceType.1027 = OID: HOST-RESOURCES-TYPES::hrDeviceNetwork HOST-RESOURCES-MIB::hrDeviceType.1028 = OID: HOST-RESOURCES-TYPES::hrDeviceNetwork HOST-RESOURCES-MIB::hrDeviceType.1536 = OID: HOST-RESOURCES-TYPES::hrDeviceDiskStorage HOST-RESOURCES-MIB::hrDeviceType.1552 = OID: HOST-RESOURCES-TYPES::hrDeviceDiskStorage 17
HOST-RESOURCES-MIB::hrDeviceType.1553 = OID: HOST-RESOURCES-TYPES::hrDeviceDiskStorage HOST-RESOURCES-MIB::hrDeviceType.3072 = OID: HOST-RESOURCES-TYPES::hrDeviceCoprocessor HOST-RESOURCES-MIB::hrDeviceDescr.768 = STRING: GenuineIntel: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz HOST-RESOURCES-MIB::hrDeviceDescr.769 = STRING: GenuineIntel: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz HOST-RESOURCES-MIB::hrDeviceDescr.1025 = STRING: network interface lo HOST-RESOURCES-MIB::hrDeviceDescr.1026 = STRING: network interface eth0 HOST-RESOURCES-MIB::hrDeviceDescr.1027 = STRING: network interface eth1 HOST-RESOURCES-MIB::hrDeviceDescr.1028 = STRING: network interface sit0 HOST-RESOURCES-MIB::hrDeviceDescr.1536 = STRING: MATSHITADVD-RAM UJ-810 HOST-RESOURCES-MIB::hrDeviceDescr.1552 = STRING: SCSI disk (/dev/sda) HOST-RESOURCES-MIB::hrDeviceDescr.1553 = STRING: SCSI disk (/dev/sdb) HOST-RESOURCES-MIB::hrDeviceDescr.3072 = STRING: Guessing that there's a floating point co-processor HOST-RESOURCES-MIB::hrDeviceID.768 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.769 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1025 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1026 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1027 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1028 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1536 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1552 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.1553 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrDeviceID.3072 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrProcessorFrwID.768 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrProcessorFrwID.769 = OID: SNMPv2-SMI::zeroDotZero HOST-RESOURCES-MIB::hrNetworkIfIndex.1025 = INTEGER: 1 HOST-RESOURCES-MIB::hrNetworkIfIndex.1026 = INTEGER: 2 HOST-RESOURCES-MIB::hrNetworkIfIndex.1027 = INTEGER: 3 HOST-RESOURCES-MIB::hrNetworkIfIndex.1028 = INTEGER: 4 HOST-RESOURCES-MIB::hrDiskStorageAccess.1536 = INTEGER: readwrite(1) HOST-RESOURCES-MIB::hrDiskStorageAccess.1552 = INTEGER: readwrite(1) HOST-RESOURCES-MIB::hrDiskStorageAccess.1553 = INTEGER: readwrite(1) HOST-RESOURCES-MIB::hrDiskStorageMedia.1536 = INTEGER: unknown(2) HOST-RESOURCES-MIB::hrDiskStorageMedia.1552 = INTEGER: unknown(2) HOST-RESOURCES-MIB::hrDiskStorageMedia.1553 = INTEGER: unknown(2) HOST-RESOURCES-MIB::hrDiskStorageRemoveble.1536 = INTEGER: true(1) HOST-RESOURCES-MIB::hrDiskStorageRemoveble.1552 = INTEGER: false(2) HOST-RESOURCES-MIB::hrDiskStorageRemoveble.1553 = INTEGER: false(2) HOST-RESOURCES-MIB::hrDiskStorageCapacity.1536 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrDiskStorageCapacity.1552 = INTEGER: 78150744 KBytes HOST-RESOURCES-MIB::hrDiskStorageCapacity.1553 = INTEGER: 117220824 KBytes HOST-RESOURCES-MIB::hrPartitionIndex.1552.1 = INTEGER: 1 HOST-RESOURCES-MIB::hrPartitionIndex.1552.2 = INTEGER: 2 HOST-RESOURCES-MIB::hrPartitionIndex.1552.3 = INTEGER: 3 HOST-RESOURCES-MIB::hrPartitionIndex.1552.4 = INTEGER: 4 HOST-RESOURCES-MIB::hrPartitionIndex.1552.5 = INTEGER: 5 HOST-RESOURCES-MIB::hrPartitionIndex.1552.6 = INTEGER: 6 HOST-RESOURCES-MIB::hrPartitionIndex.1552.7 = INTEGER: 7 HOST-RESOURCES-MIB::hrPartitionIndex.1552.8 = INTEGER: 8 HOST-RESOURCES-MIB::hrPartitionIndex.1552.9 = INTEGER: 9 HOST-RESOURCES-MIB::hrPartitionIndex.1552.10 = INTEGER: 10 HOST-RESOURCES-MIB::hrPartitionIndex.1553.1 = INTEGER: 1 HOST-RESOURCES-MIB::hrPartitionIndex.1553.2 = INTEGER: 2 HOST-RESOURCES-MIB::hrPartitionLabel.1552.1 = STRING: "/dev/sda1" HOST-RESOURCES-MIB::hrPartitionLabel.1552.2 = STRING: "/dev/sda2" HOST-RESOURCES-MIB::hrPartitionLabel.1552.3 = STRING: "/dev/sda3" HOST-RESOURCES-MIB::hrPartitionLabel.1552.4 = STRING: "/dev/sda4" HOST-RESOURCES-MIB::hrPartitionLabel.1552.5 = STRING: "/dev/sda5" HOST-RESOURCES-MIB::hrPartitionLabel.1552.6 = STRING: "/dev/sda6" 18
Intel SNMP Software Overview HOST-RESOURCES-MIB::hrPartitionLabel.1552.7 = STRING: "/dev/sda7" HOST-RESOURCES-MIB::hrPartitionLabel.1552.8 = STRING: "/dev/sda8" HOST-RESOURCES-MIB::hrPartitionLabel.1552.9 = STRING: "/dev/sda9" HOST-RESOURCES-MIB::hrPartitionLabel.1552.10 = STRING: "/dev/sda10" HOST-RESOURCES-MIB::hrPartitionLabel.1553.1 = STRING: "/dev/sdb1" HOST-RESOURCES-MIB::hrPartitionLabel.1553.2 = STRING: "/dev/sdb2" HOST-RESOURCES-MIB::hrPartitionID.1552.1 = STRING: "0x801" HOST-RESOURCES-MIB::hrPartitionID.1552.2 = STRING: "0x802" HOST-RESOURCES-MIB::hrPartitionID.1552.3 = STRING: "0x803" HOST-RESOURCES-MIB::hrPartitionID.1552.4 = STRING: "0x804" HOST-RESOURCES-MIB::hrPartitionID.1552.5 = STRING: "0x805" HOST-RESOURCES-MIB::hrPartitionID.1552.6 = STRING: "0x806" HOST-RESOURCES-MIB::hrPartitionID.1552.7 = STRING: "0x807" HOST-RESOURCES-MIB::hrPartitionID.1552.8 = STRING: "0x808" HOST-RESOURCES-MIB::hrPartitionID.1552.9 = STRING: "0x809" HOST-RESOURCES-MIB::hrPartitionID.1552.10 = STRING: "0x80a" HOST-RESOURCES-MIB::hrPartitionID.1553.1 = STRING: "0x811" HOST-RESOURCES-MIB::hrPartitionID.1553.2 = STRING: "0x812" HOST-RESOURCES-MIB::hrPartitionSize.1552.1 = INTEGER: 132206 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.2 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.3 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.4 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.5 = INTEGER: 8064272 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.6 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.7 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.8 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.9 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1552.10 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1553.1 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionSize.1553.2 = INTEGER: 0 KBytes HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.1 = INTEGER: 4 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.2 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.3 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.4 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.5 = INTEGER: 1 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.6 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.7 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.8 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.9 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1552.10 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1553.1 = INTEGER: 0 HOST-RESOURCES-MIB::hrPartitionFSIndex.1553.2 = INTEGER: 0 HOST-RESOURCES-MIB::hrFSIndex.1 = INTEGER: 1 HOST-RESOURCES-MIB::hrFSIndex.2 = INTEGER: 2 HOST-RESOURCES-MIB::hrFSIndex.3 = INTEGER: 3 HOST-RESOURCES-MIB::hrFSIndex.4 = INTEGER: 4 HOST-RESOURCES-MIB::hrFSIndex.5 = INTEGER: 5 HOST-RESOURCES-MIB::hrFSIndex.6 = INTEGER: 6 HOST-RESOURCES-MIB::hrFSMountPoint.1 = STRING: "/" HOST-RESOURCES-MIB::hrFSMountPoint.2 = STRING: "/sys" HOST-RESOURCES-MIB::hrFSMountPoint.3 = STRING: "/proc/bus/usb" HOST-RESOURCES-MIB::hrFSMountPoint.4 = STRING: "/boot" HOST-RESOURCES-MIB::hrFSMountPoint.5 = STRING: "/proc/sys/fs/binfmt_misc" HOST-RESOURCES-MIB::hrFSMountPoint.6 = STRING: "/var/lib/nfs/rpc_pipefs" HOST-RESOURCES-MIB::hrFSRemoteMountPoint.1 = "" HOST-RESOURCES-MIB::hrFSRemoteMountPoint.2 = "" HOST-RESOURCES-MIB::hrFSRemoteMountPoint.3 = "" HOST-RESOURCES-MIB::hrFSRemoteMountPoint.4 = "" HOST-RESOURCES-MIB::hrFSRemoteMountPoint.5 = "" HOST-RESOURCES-MIB::hrFSRemoteMountPoint.6 = "" 19