REPORT DOCUMENTATION PAGE * Form Approved OMBNo. 07040188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the deta needed, end completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE April 1998 4. TITLE AND SUBTITLE RCC Signature Data Base Functional Requirements Document 3. REPORT TYPE AND DATES COVERED 5. FUNDING NUMBERS 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Signature Measurement Standards Group Data Base Committee White Sands Missile Range, NM 88002-5110 8. PERFORMING ORGANIZATION REPORT NUMBER RCC Document 800-98 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) STEWS-RCC White Sands Missile Range, NM 88002-5110 10. SPONSORING / MONITORING AGENCY REPORT NUMBER same as block 8 11. SUPPLEMENTARY NOTES New Document. Will be available on RCC website at: http://tecnet0.jcte.jcs.mil:9000/rcc/index.htm 12a. DISTRIBUTION / AVAILABILITY STATEMENT 12b. DISTRIBUTION CODE Approved for public release; distribution is unlimited 13. ABSTRACT (Maximum 200 words) This document presents functionality requirements drafted by the 's Signature Measurement Standards Group, Data Base Committee. The committee requests that these requirements be implemented by any signature data migration system such as the National Threat Signatures Data System (NTSDS) designated to incorporate test and evaluation ((T&E) signature data centers. 19980615 049 14. SUBJECT TERMS data migration, signature data 15. NUMBER OF PAGES 12 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT unclas 18. SECURITY CLASSIFICATION OF THIS PAGE unclas 19. SECURITY CLASSIFICATION OF ABSTRACT unclas 20. LIMITATION OF ABSTRACT none NSN 7540-01-280-5500 Standard Form 298 (Rev. 2-891 Prescribed by ANSI Std. Z39-18 298-102
M?& Co'Äs- DOCUMENT 800-98 Council SIGNATURE MEASUREMENT STANDARDS GROUP RCC SIGNATURE DATA BASE FUNCTIONAL REQUIREMENTS DOCUMENT WHITE SANDS MISSILE RANGE KWAJALEIN MISSILE RANGE YUMA PROVING GROUND DUGWAY PROVING GROUND ABERDEEN TEST CENTER NATIONAL TRAINING CENTER ATLANTIC FLEET WEAPONS TRAINING FACILITY NAVAL AIR WARFARE CENTER WEAPONS DIVISION NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION NAVAL UNDERSEA WARFARE CENTER DIVISION, NEWPORT PACIFIC MISSILE RANGE FACILITY NAVAL UNDERSEA WARFARE CENTER DIVISION, KEYPORT 30TH SPACE WING 45TH SPACE WING AIR FORCE FLIGHT TEST CENTER AIR FORCE DEVELOPMENT TEST CENTER AIR WARFARE CENTER ARNOLD ENGINEERING DEVELOPMENT CENTER GOLDWATER RANGE DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED!vncq!JALfrYinsf3öP!
DOCUMENT 800-98 RCC SIGNATURE DATA BASE FUNCTIONAL REQUIREMENTS DOCUMENT APRIL 1998 Prepared by Data Base Committee Signature Measurement Standards Group Published by Secretariat White Sands Missile Range New Mexico 88002 'DTIC QU/JCmr n-tshxtbd J
TABLE OF CONTENTS Page A Data System Development 1 B Data Acquisition 1 C Data Archival 1 D Data Dissemination 2 E Customer Support 2 F Information System Management 2 in
RCC SIGNATURE DATA BASE FUNCTIONAL REQUIREMENTS DOCUMENT This document presents functionality requirements drafted by the Range Commanders Council's Signature Measurement Standards Group, Data Base Committee. The committee requests that these requirements be implemented by any signature data migration system such as the National Threat Signatures Data System (NTSDS) designated to incorporate test and evaluation (T&E) signature data centers. All T&E data centers connected to a distributed data system shall comply with, possess, or maintain the following. A. DATA SYSTEM DEVELOPMENT 1. Consistent standard data definitions and units. 2. Local data center standards for collection, archival, and dissemination of signature data. 3. A capability to convert and load signature data having a nonstandard format. 4. A software/procedures development plan. 5. A distributed data system interface developed under data system guidance including all data system administrative functions. 6. A flexible data system upgrade capability that keeps data standards and procedures current. 7. On-line application and analysis packages (such as XDAT, XV, KHOROS, and signature models). 8. A capability to track the location of data base tables. 9. A data system designed for rapid retrieval of data and a measurement process (metric) to evaluate retrieval performance. B. DATA ACQUISITION 1. A capability to track all data sets to ensure all required data are obtained by the user and all appropriate data standards are followed. 2. A data quality check for the local data loading process. 3. A local data loading process for data base population. 4. A capability to manage multiple data types (such as raw, calibrated, supporting, and comments) in the local data schema. 5. A data transformation capability. 6. A capability to transfer data from signature models. C. DATA ARCHIVAL 1. Standard data definitions and units for the data elements in the local data loader. 2. Data storage and retrieval processes and capabilities adequate to handle anticipated volumes. 3. A capability to track data set status for receipt, storage, and dissemination.
4. A capability to convert nonstandard data to standard formats for archival. 5. A capability to periodically review data archival capabilities at the local level and to upgrade procedures and software where appropriate. D. DATA DISSEMINATION 1. A capability to provide the customer with all pertinent information like comments and caveats associated with each data set. 2. An on-line data directory defining target type, instrumentation description, test reports, data type (modeled or field test), and point-of-contact information for the customer. 3. A capability to locally generate hard copy or electronic media retrievals of data not generally accessible to customers. 4. A data directory home page format using Hypertext Markup Language (HTML). 5. A capability to maintain and to update data directory home page documents at the local level. 6. A capability to provide sufficient information to permit conversion of data to the customer's data analysis process. E. CUSTOMER SUPPORT 1. An on-line data directory available to the entire signature community including customers not requesting data transfer. Data directory information access restricted on a verified need-to-know basis. 2. A system to track the status of customer requests. 3. An on-line system to provide all data access protocols to the customer. 4. An on-line system to provide help to the customer. 5. Procedures for customer data system change requests, comments, and problem resolution. 6. On-line status reports of present and future target field tests and supporting information such as target and test conditions. F. INFORMATION SYSTEM MANAGEMENT 1. Local data access control with customer's need to know verified through access lists. 2. A capability to monitor data quality (within expected format and bounds). 3. Frequent data back-ups according to established procedures. 4. An on-line security guide available to the customer for all data sets. A caution to users that merging data can increase classification levels. 5. A system to automatically monitor all data system functions and provide status reports to the system manager. 6. A system to track all data base table access and data set usage.
7. Periodic hardware and software maintenance and upgrades, and review of maintenance procedures. 8. A data system user's manual. 9. A periodic review of all data system maintenance procedures for security validation.