THE SEA CADET CORPS COMMUNICATIONS SPECIALISATION

THE SEA CADET CORPS COMMUNICATIONS SPECIALISATION CADET LOG BOOK (A4 Loose-Leaf Version) (SHORT TITLE CLB(C)/A4) ANNEX A TO ASCR T7 (4 th Edition) ORIGINAL APRIL 2002 (Also available in A5 Loose-Leaf [CLBC/A5] and A5 Booklet [CLBC/A5B] versions)

Personal Details Surname First Name(s) Rank/Rate Unit Training Record THIRD CLASS Commenced Completed Instructor Appointment SECOND CLASS Instructor Appointment General Tactical Commenced Completed Commenced Completed FIRST CLASS General Tactical Commenced Completed Commenced Completed Instructor Appointment Morse Proficiency Semaphore Proficiency

WELCOME TO SEA CADET COMMUNICATIONS! How to use your Log Book This book contains the jobs you need to complete to gain your Communications Qualifications. It is divided into three parts; Part A Class Three 1. Follow the jobs in this part to gain the first of your Communications Badges. 2. When you re ready for the test, ask your instructor to sign off the Training Record in the front of the book Part B Class Two 1. Decide whether you are going to be a General Communicator (a Sparker ) or a Tactical Communicator (a Bunting ). You can only choose one or the other - NOT both. It might be that you have to follow your instructor s specialisation as G and T are quite different. 2. Once you have chosen, follow either the SECOND CLASS (GENERAL) section or the SECOND CLASS (TACTICAL) section. 3. You must also follow the jobs in the SECOND CLASS (COMMON SYLLABUS) section, whether you are doing G or T. You can do this before, at the same time as, or after your G or T training. 4. When you re ready for the exam, ask your instructor to sign off the Training Record at the front of the book. Part C Class One 1. Follow this part in the same way as you did for Class Two. 2. Don t forget to do the COMMON SYLLABUS as well. 3. When you re ready for the exam, ask your instructor to sign off the Training Record. When you have successfully finished Class One (G) or (T), you can do the other sub-specialisation as well if your instructor will let you. You will need to be able to show to your instructor that you have learned and understood what you need for each of the jobs. Sometimes this may be that you have to answer some questions. Sometimes you may have to do something more practical. Your instructor will tell you which is which if you don t already know. Page CLBC - 1

Do not lose this Log Book. DO NOT WRITE, DOODLE OR DRAW IN THIS BOOK OR MARK IT IN ANY WAY except to fill in your details at the front and on this page. Your instructor will sign off your jobs. YOU MUST KEEP THIS LOG BOOK AVAILABLE FOR INSPECTION BY ANY OF THE FOLLOWING PEOPLE: Your Unit Communications Instructor(s) Your Commanding Officer Your District Communications Officer Your District Officer Your Area Staff Officer (Communications) The Headquarters Staff Officer (Communications) All the information you need to complete the jobs in this book can be found in the SCC Communications Training Manual. If you have any problems completing any of the jobs, speak to your Communications Instructor. Write in here the names of your Unit, District and Area Communications Staff Unit Communications Instructor(s) Rank/Rate District Staff Officer (Communications) (If there isn t one, write None in the box) Area Staff Officer (Communications) IF YOU NEED HELP ASK! Page CLBC - 2

JOB LIST Page 1 of 2 Job number Subject Page P A R T A Class Three 1 Basic Admin Voice Procedures 5 2 Introduction to Data Communications 6 3 Introduction to Tactical Communications 7 4 Phonetic Alphabet 7 5 Speaking and Writing 8 6 Use of a Telephone 8 7 Messenger Duties 8 8 Communications History 9 9 Basic Safety 9 10 Unit Communications Equipment 10 P A R T B Class Two (General) 11 The Basic Message Format 11 12 Radio Principles 11 13 Frequency Bands and Propagation 12 14 Tuning a Radio Receiver 12 15 Data to Radio 13 16 Data Communication Principles 14 17 Typing Skills and Message Preparation 14 Class Two (Tactical) 18 Morse by Flashing Light 17 19 Flag Recognition 17 20 Hoisting Procedures 18 21 Tactical Voice Procedure 18 22 Manoeuvring Definitions and Procedures 19 23 Fleetwork Resultant Formations 19 Page CLBC - 3

JOB LIST Page 2 of 2 Job number Subject Page Class Two (Common Syllabus) 24 Communications Safety 21 25 Systems of Communication 22 26 Operating Principles 22 27 Admin Voice Procedures 23 28 Message Handling 24 29 Practical Rigging 25 P A R T C Class One (General) 30 Revision 27 31 Advanced Radio Principles 27 32 International Maritime Communications 28 33 MF/HF Station Rigging 29 34 Advance Data Communication Principles 30 35 Data Protection 31 36 Advanced Typing Skills and Message Preparation 31 Class One (Tactical) 37 Revision 33 38 Morse by Flashing Light 33 39 Flashing Procedure 33 40 V/S Manoeuvring Instructions 34 41 Advanced Hoisting Procedures 34 42 Advanced Tactical Voice Procedure 35 43 Advanced Manoeuvring Definitions and Procedures 35 44 Advanced Fleetwork Resultant Formations 36 Class One (Common Syllabus) 45 Revision 37 46 Communications Safety 37 47 Advanced Admin Voice Procedures 38 48 Advanced Message Handling 39 49 Event Planning 40 50 Advanced Practical Rigging Page CLBC - 4

PART A - CLASS THREE Job 1 BASIC ADMIN VOICE PROCEDURES Understand the meaning of the following Communications terms: Callsign Transmitter Receiver Radio Net Operator Ending Sign Call Radio Check Closing Down Roger Say Again Radio Station Carry out the following practical tasks. You don t need a transceiver to do this, but if your Unit has the equipment, ask your Instructor if you can do it on air. (If you re not sure what a Transceiver is, ask your instructor) If you are using a Transceiver, switch on and check that the frequency is clear. Using the right callsigns, call another station. Answer correctly when another station calls you. Initiate a Radio Check. Answer a Radio Check. Tell another station that you have a message for them. When the other station answers, send a short message. Don t forget to use the right Ending Signs. Repeat the message when the other station asks you to. Receive a message from another station and a. Ask them to repeat it b. Tell them that you have got it (Continued ) Page CLBC - 5

( Job 1 continued) Ask for permission to Close Down. Send a Closing Down Signal. If you are using a transceiver, switch it off. Job 2 INTRODUCTION TO DATA COMMUNICATIONS Draw or fill in a blank Block Diagram showing the basic parts of a Data Radio Station. State what each part of the system does. Page CLBC - 6

JOB 3 INTRODUCTION TO TACTICAL COMMUICATIONS Correctly identify these flags: Union Flag Preparative Pennant Sea Cadet Ensign Church Pennant There are three countries flags that make up the Union Flag. Find out which flag belongs to which country. Find out which Patron Saint belongs to which flag. Find out what each flag looks like Find out when the Union Flag can be called a Union Jack Carry out the following Signalman s Duties. Every Sea Cadet Unit has the right flags for this job. The Prep at Colours The Church Pennant at Colours The Ensign at Colours The Prep at Evening Colours The Ensign at Evening Colours When you have mastered these, carry out the Half-Masting routine for the Ensign for Colours and Evening Colours. JOB 4 THE PHONETIC ALPHABET Spell any word which your Instructor asks you to, using the correct phonetic letters. Use the numeral pronunciation shown in the Communications Training Manual to say whatever numbers your Instructor asks you to say. Page CLBC - 7

JOB 5 SPEAKING AND WRITING Write down a short dictation, which your instructor will give you. Don t worry too much about spelling, but make sure it is clear and can be read by anyone. Use BLOCK CAPITALS to make it easy to read. JOB 6 USE OF THE TELEPHONE Show the correct way to make an emergency telephone call using 999 or 112. Show that you know how to answer your Unit s telephone clearly and with courtesy so that the caller is given a good impression. If your Unit has an internal telephone system, or field telephones, use them. Otherwise do these exercises verbally with your instructor. DO NOT USE YOUR UNIT S OUTSIDE TELEPHONE FOR THIS JOB. JOB 7 MESSENGER DUTIES Carry out the following practical task. Take a written message from an Originator to an Addressee, and either return with a reply or let the Originator know if there was no reply. Make sure that you are correctly dressed and pay all the relevant marks of respect to the people with whom you are dealing. Page CLBC - 8

JOB 8 COMMUNICATIONS HISTORY All the information you need for this job is in the SCC Communications Training Manual. Understand the importance of these events and people to the Communications world: Guglielmo Marconi Admiral Popham Samuel Morse The Battle of Salamis Captain Columb Alexander Graham Bell Telstar The Titanic Sinking Lord George Murray The Black Book Admiral Kempenfeldt 12 December 1901 Find out what is believed to be one of the earliest forms of Naval signalling. JOB 9 BASIC SAFETY Understand the safety rules in your Unit regarding: Job Done! Eating and Drinking in the Radio Room Power Supplies and Electricity Aerials Page CLBC - 9

JOB 10 UNIT COMMUNICATIONS EQUIPMENT Familiarise yourself with whatever Communications Equipment your Unit holds. You don t have to be able to work it yet, just know a little bit about each item. Don t forget that it s not just about radios. Flags, lights and telephones are communications equipment too. If your Unit hasn t got any, ask your instructor if you can visit a Unit that has. Page CLBC - 10

PART B - CLASS TWO Class Two (General) JOB 11 THE BASIC MESSAGE FORMAT Familiarise yourself with the Basic Message Format in Chapter Four of the SCC Communications Training Manual. There is no need to learn it by heart, but try and see where the different bits fit in with what you know about Voice Procedure. JOB 12 RADIO PRINCIPLES Understand what is meant by the following terms used in Radio Communications: Frequency Hertz Kilohertz MegaHertz GigaHertz Amplitude Modulation Frequency Modulation Page CLBC - 11

JOB 13 FREQUENCY BANDS AND PROPAGATION Draw a simple Frequency Band Table showing: The LF Band The MF Band The HF Band The VHF Band The UHF Band The SHF Band Mark out where in these bands the SCC Frequencies lie JOB 14 TUNING A RADIO RECEIVER This is a practical task, but it can be carried out theoretically if you have no access to equipment. Tune a Multi-Band Communications Receiver (not a Hi Fi or a Transistor Radio) to a given frequency. A Radio Amateur set will be good for this if you have no military-style kit. Understand the use of the following controls: Band Selector Coarse Tuner Fine Tuner RF Gain Audio Gain Mode Selector BFO On/Off Switch If possible, calibrate your receiver to the 10 MHz time signal. If your receiver has one, demonstrate the use of the Antenna Matcher. Understand the terms Sensitivity and Selectivity in relation to Radio Receivers. Page CLBC - 12

JOB 15 DATA TO RADIO This is a practical task, but it can be carried out theoretically if you have no access to equipment. Connect a Data terminal, modem (TNC), transceiver, aerial and power supplies together correctly. YOU MUST BE UNDER THE SUPERVISION OF YOUR INSTRUCTOR TO CARRY OUT THIS TASK JOB 16 DATA COMMUNICATION PRINCIPLES Understand the following terms used in Data Communications: If a term refers to equipment, make sure you understand what that equipment does and, if relevant, how it does it. Bit Byte Nibble DTE DCE Bit Rate Baud Rate Modem Simplex Half Duplex Full Duplex Packet Radio Synchronous Data Asynchronous Data Protocol Parity Bit Checking Bus Network Ring Network Star Network Hybrid Network Understand the importance of synchronisation of digital signals. Understand how this is achieved. (Continued ) Page CLBC - 13

( Job 16 continued) Practical Tasks: Find out what the Protocols are for: 1. Convert a given Base-10 number into a binary number 2. Convert a given binary number into a Base-10 number 3. Demonstrate error detection by Parity Bit Checking a. The Internet b. e-mail c. The World-Wide Web d. Modems e. Packet Radio Find out how Packet Radio differs from Radio Automatic Teletype (RATT or RTTY) If you can, find out the names of some of the Protocols used for RATT. JOB 17 TYPING SKILLS AND MESSAGE PREPARATION This is a Practical Task. 1. MF/HF Net a. Ask your instructor to write out a Plaindress Message on a piece of plain paper, as if it were to be transmitted on the National MF/HF Net. Ask them to make sure all the parts of the message are mixed up. b. Transfer the message on to an F.Sigs.266 Message Form, putting everything in the right place. c. Type the message either on a typewriter, teleprinter or computer, in the correct format. You should use blank paper or an unformatted screen for this. (Continued ) Page CLBC - 14

( Job 17 Continued) 1. Packet Cadet/PACRAN On a PC which has Packet Cadet software installed and is connected as part of a Packet Radio Station a. Start the Packet Cadet software and configure it as a terminal, either on a tactical net or PACRAN. b. Once you have done this, use the same message you had for the MF/HF Net, enter it correctly into the dialogue box and queue it for transmission. If you do not have access to Packet Cadet software, ask your instructor to copy the Packet Cadet screenshots from the Communications Training Manual, write in the dialogue boxes instead and show which buttons you would need to click to queue your message. The next section is Communications Class Two (Tactical) General sub-specialists move on to JOB 24 in the Communications Class Two (Common Syllabus) Section Page CLBC - 15

This Page is Deliberately Blank Page CLBC - 16

Class Two (Tactical) JOB 18 MORSE BY FLASHING LIGHT Learn all 26 letters and 10 numerals of the Morse Code. Practise using them with a Flashing Light until you can receive AND send Morse at six words per minute with a minimum accuracy of 80%. JOB 19 FLAG RECOGNITION Find out what the following flags and pennants look like, what they mean (where appropriate) and how they are used: Standards Red Ensign White Ensign Blue Ensign Sea Cadet Ensign Union Flag Flag Officers Distinguishing Flags Boats Ensigns Naval Numeral Flags The International Code of Signals FORM SPEED CORPEN PORT STARBOARD Page CLBC - 17

JOB 20 HOISTING PROCEDURES Understand and be able to carry out the correct flag-hoisting procedures for: 1. Halyard Priority for ships with a single mast and only one Yard 2. Executive method by Flaghoist 3. Ceremonial Half-mast Colours 4. Dress Ship Practise on a mast whenever you are able to. JOB 21 TACTICAL VOICE PROCEDURE This is a Practical Task. Either on a Radio Net or in a room with your instructor (and other Cadets if possible), practice the following procedures until you get them right. Delayed Executive Method Immediate Executive Partial execution of a multiple signal Use of TIME GROUP in a tactical message Corrections Repetitions Page CLBC - 18

JOB 22 MANOEUVRING DEFINITIONS AND PROCEDURES Here are some Manoeuvring Definitions: FORMATION (FORM 1, FORM 2, FORM 3 and FORM 4) TURN (Relative and True) CORPEN (Relative and True) SPEED Find out what the procedures are that relate to these definitions. JOB 23 FLEETWORK RESULTANT FORMATIONS This is a Practical Task. Carry out some simple Fleetwork Exercises. Each exercise should have about eight manoeuvres in it and you should use Form1, Form 2, Form 3, and Form 4 as well as simple Turns and Corpens, Speed and automatic change of Guide. Now move on to JOB 24 in the next section, which is the Communications Class Two (Common Syllabus) Section Page CLBC - 19

This Page is Deliberately Blank Page CLBC - 20

Class Two (Common Syllabus) JOB 24 COMMUNICATIONS SAFETY 1. Understand the main Safety Rules for your Unit s Radio Room. 2. Find out, and make sure you understand the precautions to be taken for the protection of Cadets, adults and equipment in a Field Radio Station. 3. Understand the precautions to be taken for the protections of Cadets, adults and equipment on or near water. 4. Make sure you know what actions to take in the event of one of the following incidents occurring: Electric Shock Electrical or Other Fire in the Radio Room or Field Station Radiation Burns Drowning Incident Speak to a First Aid instructor so that you know how to deal with injuries arising from one or all of these incidents. In 2 and 3 don t forget that equipment is not just radios. There are flags, lights and all sorts of other things to consider. Page CLBC - 21

JOB 25 SYSTEMS OF COMMUNICATION Give a couple of examples of: Messenger Mail Sound Communications Line Communications Radio Communications Visual Communications Make sure that you understand the basic principle of how each one works. JOB 26 OPERATING PRINCIPLES Get to know about the following principles of Radio Operating and understand what each one means: Radio Net Directed Net Free Net Engineering Net Callsigns How SCC Callsigns are made up Alphanumeric Sequence of Answering The Forbidden Practises Prowords Page CLBC - 22

JOB 27 ADMIN VOICE PROCEDURES Revise what you learned at Class Three. Make sure you know it thoroughly. Understand, then, in a practical exercise, use the following procedures correctly: Request and give a Time Check Request and give a Test Transmission Respond to a Net Control who is Directing a Net and setting up a Traffic List Request permission to transmit in a Directed Net Transmit and receive a formatted Plaindress Message Transmit and receive an Abbreviated Plaindress Message, both with and without a Time Group Cancellation during Transmission Cancellation after a receipt has been obtained Correction during Transmission Correction in the Final Instructions Correction after a receipt has been obtained Plaindress Relay (single relay station) Abbreviated Plaindress Relay (two relay stations) Words Twice Break-In (Station breaking in) Continuation of Transmission following a Break-in (station broken in upon) Spelling of difficult or ambiguous words and/or phrases Follow the protocol in force on the net for callsign abbreviation Page CLBC - 23

JOB 28 MESSAGE HANDLING This is a practical task. Prepare a Message Form F.SIGS.266 correctly. 1. a. Ask your instructor to write out a very wordy Plaindress Message on a piece of plain paper. Ask them to make sure all the parts of the message are mixed up. b. Re-word the message so that is concise and clear. Where appropriate, try to use words like INTEND, CONFIRM and REQUEST to replace or shorten long sentences. c. Enter the message in the correct places on a Message Form. d. Record Time of Transmission, Operator s Details and System in the appropriate places. e. Ask your instructor to Release the message. 2. a. Receive a Plaindress Message from a Radio Net (or verbally from your instructor if you have no access to radios) and record it correctly on a Message Form. b. Record the Time of Receipt, Operator s Details and System in the appropriate places. 3. Carry out exercises 1 and 2 again, but this time use plain paper. Make sure you use the correct format when writing the message down. Write out a Traffic List. Take down a Traffic List when the Net Control Station is directing the Net. Mark your list in the order you would instruct stations to transmit messages if you were Net Control. This exercise can be done in a room if you have not access to radios. Maintain an accurate Log of on-air activity. If you have no access to radios, make sure you understand what a Log is, and how to enter details in it. Page CLBC - 24

JOB 29 PRACTICAL RIGGING Assist in the rigging and de-rigging of a UHF or VHF Field Radio Station. This is a practical task. Find out how to deal with the following. Understand any risks which may be associated with them and the precautions which should be taken to avoid those risks: Antenna Feeders Masts, Guys and Pegs Topweight and Windage Overhead Power Lines Antenna Loading Test Power Supply Test Shelter for Equipment and Personnel Page CLBC - 25

This Page is Deliberately Blank Page CLBC - 26

PART C - CLASS ONE Class One (General) JOB 30 REVISION Go over all you did at Class Three and Class Two and make sure you know everything you need to. JOB 31 ADVANCED RADIO PRINCIPLES Identify and understand what Emission Designators are and which ones apply to SCC Frequencies. Understand Power Outputs and find out what the maximum allowances are on SCC channels. Understand these basic Aerial types: Dipole Long Wire Helically Wound (Rubber Duck) Yagi Whip or Monopole Understand the relationship between frequency and aerial length, and the importance of correct loading or matching. Make sure you become familiar with the term Standing Wave Ratio (SWR) Practise using an SWR Meter to match an aerial to a transmitter. ( Swaring In ) Make sure you can identify the correct polarity of Power Supplies and understand the purpose and importance of fuses. Understand how to deal with batteries and Petrol Generators safely and be aware of the precautions regarding their use. Be fully conversant with the precautions regarding the storage and replenishment of fuel. Page CLBC - 27

JOB 32 INTERNATIONAL MARITIME COMMUNICATIONS Find out what you can about GMDSS. Get to know three types of International Priority Signals PAN SECURITÉ MAYDAY and understand the importance of each. Practical Task. Practise getting up-to-date weather forecasts (and particularly shipping forecasts) from as many of these sources as you can. Compare the forecasts from each of the stations you use. BBC National Radio Stations BBC Local Radio Stations Other Local Radio Stations Meteorological Offices HM Coastguard Page CLBC - 28

JOB 33 MF/HF STATION RIGGING THERE ARE TWO PARTS TO THIS JOB. YOU CAN ONLY DO THE PRACTICAL PART IF: Your instructor is suitably qualified and holds an SCC MF/HF Permit to Transmit Your instructor is able to supervise you DIRECTLY AND You have access to the relevant equipment AND You have done the non-practical part first AND Understand the following thoroughly before you attempt the practical part. Radiation risks from Aerials and feeders RADHAZ precautions The worldwide potential of MF/HF radio emissions Potential for interference with local TVs and other radio equipment Safe and sensible use of power Behaviour of MF/HF signals at different times of day and night Methods of keeping a transmitter on frequency If you can meet the criteria listed at the start of this job, assist in the rigging and maintenance of a Unit MF/HF radio station. If you cannot complete the practical part of this job, don t worry. It WILL NOT affect your chances of getting the RO1(G) qualification. You MUST however, do the non-practical part. Page CLBC - 29

JOB 34 ADVANCED DATA COMMUNICATION PRINCIPLES Get to know about Bit and Baud rate, understand the differences between the two and how they are related in a Digital Communications System. Understand the principle of Forward Error Correction (FEC) and how a 4:3 Hamming Code works. Understand how synchronisation is achieved both in synchronous and asynchronous systems. Understand the operation of an RS232 link. Find out what the following terms mean: Parity Baud Rate Stop Bits Start Bits Data Bits Flow Control Practical Tasks. On paper, demonstrate FEC using a 4:3 Hamming Code. Find out what the following digital signal abbreviations mean and then produce diagrams to illustrate them: NRZ RZ BNRZ BRZ Manchester Code Page CLBC - 30

JOB 35 DATA PROTECTION A large part of a Communicator s responsibility is to keep information and stored data secure and confidential. Find out where you can see a copy of the Data Protection Act locally. You don t have to read it, but you should know where to go if you need it. Make sure you understand fully the concepts of security and confidentiality in relation to Communications. JOB 36 ADVANCED TYPING SKILLS AND MESSAGE PREPARATION This is a practical task. 1. MF/HF Net Ask your instructor to write out a Plaindress Message on a piece of plain paper, as if it were to be transmitted on the National MF/HF Net. Ask them to make sure all the parts of the message are mixed up. This is similar to Job 17 which you did for class two, but more complex. Ask your instructor to include Collective Callsigns, Information and Exempt Addressees and Subject Indicator Codes. Check all the callsigns with the appropriate chapter of the SCC Communications Training Manual. Raise any queries you may have with your instructor. Check all the SICs with the appropriate chapter of the SCC Communications Training Manual. Make sure the SICs are relevant to the subject(s) of the message. If not, query them with your instructor. (Continued ) Page CLBC - 31

( Job 36 continued) When you are satisfied, transfer the message on to an F.Sigs.266 Message Form, putting everything in the right place. Type the message from the F.Sigs.266, either on a typewriter, teleprinter or computer, in the correct format. You should use blank paper or an unformatted screen for this. 2. Packet Cadet/PACRAN As you did in Job 17, enter the message in the correct Packet Cadet dialog box, making sure that all the parts go in all the right places and queue it for transmission. If you have Cadets in your Unit doing Class 2(G) Communications, get some practise, supervising them doing Job 17. 3. Internal Distribution Understand the method of internal distribution and filing of messages in your Unit. Don t forget, SICs will tell you what a message is about and so you can then decide how to distribute both incoming and outgoing messages. If you haven t already got one, you could, with your instructor, start an Internal Distribution and Filing System. The next section is Communications Class One (Tactical) General sub-specialists move on to JOB 45 in the Communications Class One (Common Syllabus) Section Page CLBC - 32

Class One (Tactical) JOB 37 REVISION Go over all you did at Class Three and Class Two and make sure you know everything you need to. JOB 38 MORSE BY FLASHING LIGHT Continue to practice sending and receiving Morse by Flashing Light until you can send AND receive at nine words per minute with a minimum accuracy of 80%. JOB 39 FLASHING PROCEDURE Understand what is meant by, and be able to operate: Directional Flashing Non-Directional Flashing Double-Flash Procedure Get to know, and then practice procedures using: The Delayed Executive Method The Immediate Executive Method Page CLBC - 33

JOB 40 V/S MANOEUVRING INSTRUCTIONS Get to know thoroughly the Single-Letter meanings of all the flags of the International Code of Signals Understand how to use the Code Pennant. Make sure that you can identify all the Naval Numeral Flags as well as these Special Flags and Pennants which are used in manoeuvring: 4 th Sub Interrogative Desig Negative Station JOB 41 ADVANCED HOISTING PROCEDURES Understand and be able to carry out the correct flag-hoisting procedures for: 1. Halyard Priority for ships with single mast but more than one yard fitted 2. Use of multiple signal yards and halyards on ships with more than one mast 3. Cancelling/correcting a flaghoist 4. Answering a flaghoist signal 5. Relaying Page CLBC - 34

JOB 42 ADVANCED TACTICAL VOICE PROCEDURE This is a practical task. Take part in a Fleetwork Exercise using the correct Tactical Voice Procedures. JOB 43 ADVANCED MANOEUVRING DEFINITIONS AND PROCEDURES Understand what the following procedures entail, and be able to carry them out: STATION (Relative and True) FORM F, FORM D GOVERNING GROUPS FORM. LINE OF BEARING (Relative and True) ANCHORING and WEIGHING SIGNALS STANDARD DISTANCE PREPARATIVE PENNANT when used superior to a Tactical Hoist Page CLBC - 35

JOB 44 ADVANCED FLEETWORK RESULTANT FORMATIONS This is a practical task. Carry out some simple Fleetwork Exercises. Each exercise should have a minimum of twelve manoeuvres in it and you should include examples of ALL the manoeuvres you have learned. Now move on to JOB 45 in the next section, which is the Communications Class One (Common Syllabus) Section Page CLBC - 36

Class One (Common Syllabus) JOB 45 REVISION Go over all you did at Class Three and Class Two and make sure you know everything you need to. JOB 46 COMMUNICATIONS SAFETY Go over everything you learned about Communications Safety at Class Three and Class Two. Discuss with your instructor how YOU would apply the safety rules if YOU were the Rating in Charge of a Communications Watch. Find out about Risk Assessments and then make a list of the things you would recommend to your instructor to include in one for: a. A Unit Communications Station (preferably your own Unit, but not necessarily) b. A Field Communications Station (don t forget the Rigging and De-Rigging aspects) Page CLBC - 37

JOB 47 ADVANCED ADMIN VOICE PROCEDURES Understand, then, in a practical exercise, use the following procedures correctly: Read Back Do Not Answer Requesting and Transmitting Verifications Requesting and Transmitting Acknowledgements Imposition of Emergency Silence Lifting of Emergency Silence Imposing and Lifting Minimise on a net Imposing Minimise with a previously sent message. Direction of a Net and Directing Signal Traffic according to your Traffic List Freeing a Net Imposing and Maintaining Discipline on a net On-air correction of procedural errors Page CLBC - 38

JOB 48 ADVANCED MESSAGE HANDLING Act as Cadet in Charge of a Communications Watch. This is a practical task. During your watch, you should be able to: Assign Subject Indicator Codes (SICs) to outgoing messages where appropriate. Distribute incoming messages according to their SICs (where they have been applied). Make sure that members of your watch are logging and filing messages correctly within the Communications Station. Draw up a protocol for your Communicators to follow so that messages are logged and filed correctly. Ensure that your Communicators prepare outgoing messages properly and appropriately for the system upon which they are to be transmitted. Be aware of the on-air procedures your communicators are using, ensure that they are correct and advise them if not. Be able to give assistance to any member of your watch who is having difficulty. Spot potential problems and, if necessary, report them to an Adult Instructor before they become serious. Page CLBC - 39

JOB 49 ADVANCED EVENT PLANNING This is a practical task. Write a Communications Plan (COMPLAN) for a Communications event. The event may be fictional, but treat it as though it were the real thing. Whichever it is, your Net should be running in support of a local Sea Cadet event or function. Write an Operational Order (OPORD) for a Communications event. Again, it may be fictional, but you would benefit from doing this for a live exercise. It can be in support of a major Sea Cadet event or in support of an Outside event. The choice is yours. These two tasks are quite involved. Don t hesitate to call on the experience of your Area Staff Officer (Communications) if you need to. JOB 50 ADVANCED PRACTICAL RIGGING With the supervision of your instructor, instruct and supervise other Cadets and/or less experienced staff in the rigging and de-rigging of a Field Communications Station. Your instructor is there to ensure safety, but otherwise, the ball is in your court. You should now be ready to take your Class One Communications Test. If you ve all the jobs right, you ll have no trouble at all. Well done! It s been a long haul and you ve worked hard. Now go and get that badge you ve earned it!! Page CLBC - 40