Curriculum Vitae Anas Batou Assistant professor, HDR Laboratoire Modélisation et Simulation Multi Echelle Université Paris-Est Marne-la-Vallée 5, Bd Descartes 77454 Marne-la-Vallée Cedex 2 Tel. : 01 60 95 77 92 Fax : 01 60 95 77 99 E-mail : anas.batou@univ-paris-est.fr Born September 10, 1981, in Amiens (France). Education 2001 2005 : ENS Cachan - Mechanical Engineering (M.S. eq.). 2004 2005 : Master Engineering Science àt Ecole Centrale de Paris - Structural Dynamics and Coupled Systems (M.S. eq.). 2005 2008 : Ph.D. at Université Paris-Est Marne-la-Vallée, supervised by C.Soize and entitled Identification of stochastic forces applied to a nonlinear dynamical system using an uncertain computational model and experimental responses. June 2014 : Habilitation à diriger des recherches entitled Structural dynamics and rigid body dynamics - Uncertainty quantification and reduced-order modeling. Work Experience 2008 2010 : ATER (temporary professor) at Université Paris-Est Marne-la-Vallée. 2010 : Assistant professor at Université Paris-Est Marne-la-Vallée.
Research interests Uncertainty quantification in structrural dynamics. Uncertainty quantification in multibody dynamical systems. Model reduction in LF/MF dynamics. Generation of seismic accelerogramms. Publications Book chapters : [1] A. Batou, C. Soize, Random dynamical response of a multibody system with uncertain rigid bodies, in Computational Methods in Stochastic Dynamics - Vol. 2, Springer, Chapter 1, Pages : 1-14, 2012. doi :10.1007/978-94-007-5134-7_1 Publications in peer-reviewed international journals : [1] C.K. Choi, A. Batou, H.H. Yoo, Reliability design of multibody systems using samplebased extreme value theory, Multibody System Dynamics, online, 1-28, 2015. doi : 10.1007/s11044-015-9482-7. [2] O. Ezvan, A. Batou, C. Soize, Multilevel reduced-order computational model in structural dynamics for the low- and medium-frequency ranges, Computers and Structures, 160, 111-125, 2015. doi : 10.1016/j.compstruc.2015.08.007 [3] A. Batou, A global/local probabilistic approach for reduced-order robust modeling adapted to the low- and mid-frequency structural dynamics, Computer Methods in Applied Mechanics and Engineering, 294, 123-140, 2015. doi :10.1016/j.cma.2015.06.007 [4] A. Batou, Model updating in structural dynamics - Uncertainties in the position and orientation of sensors and actuators, Journal of Sound and Vibration, in press, 2015. doi :10.1016/j.jsv.2015.06.017 [5] A. Batou, C. Soize, S. Audebert, Identification of a stochastic computational model using experimental modal data, Mechanical systems and Signal Processing, 50-51 (-), 307-322 (2015). doi :10.1016/j.ymssp.2014.05.010 [6] A. Batou, T.G. Ritto, R. Sampaio, Entropy propagation analysis in stochastic structural dynamics : Application to a beam with uncertain cross sectional area, Computational Mechanics, 54(3), 591-601 (2014), 2014. doi :10.1007/s00466-014-1008-2
[7] A. Batou, C. Soize, Generation of accelerograms compatible with design specifications using information theory, Bulletin of Earthquake Engineering, 12(2), 769-794, 2014. doi :10.1007/s10518-013-9547-z. [8] A. Batou, C. Soize, Calculation of Lagrange multipliers in the construction of maximum entropy distributions in high stochastic dimension, SIAM/ASA Journal on Uncertainty Quantification, 1(1), 431-451, 2013. doi :10.1137/120901386. [9] A. Arnoux, C. Soize, A. Batou, L. Gagliardini, Reduced-order computational model for low-frequency dynamics of automobiles, Advances in Mechanical Engineering, (Article ID 310362), 1-12, 2013. doi :10.1155/2013/310362. [10] A. Batou, C. Soize, Stochastic modeling and identification of an uncertain computational dynamical model with random fields properties and model uncertainties, Archive of Applied Mechanics, 83(6), 831-848,2013. doi :10.1007/s00419-012-0720-7 [11] A. Arnoux, A. Batou, C. Soize, L. Gagliardini, Stochastic reduced order computational model of structures having numerous local elastic modes in low frequency dynamics, Journal of Sound and Vibration, 332, 3667-3680, 2013. doi :10.1016/j.jsv.2013.02.019 [12] A. Batou, C. Soize, Uncertainty quantification in low-frequency dynamics of complex beam-like structures having a high-modal density, International Journal for Uncertainty Quantification, 1(1), 431-451, 2013. doi :10.1615/Int.J.UncertaintyQuantification.2012005286 [13] V.E.D.Sacramento, R.Sampaio, T.G.Ritto, A.Batou, Integrity of an offshore structure subjected to waves : A stochastic analysis, Mecànica Computacional 12, 747-761 (2013). [14] A. Batou, C. Soize, N. Brie, Reduced-order computational model in nonlinear structural dynamics for structures having numerous local elastic modes in the low-frequency range. Application to fuel assemblies, Nuclear Engineering and Design, 262, 276-284, 2013. [15] A. Batou, C. Soize, Rigid multibody system dynamics with uncertain rigid bodies, Multibody System Dynamics,27(3), 285-319, 2012. doi :10.1007/s11044-011-9279-2 [16] C. Soize, A. Batou, Stochastic reduced-order model in low-frequency dynamics in presence of numerous local elastic modes, Journal of Applied Mechanics - Transactions of the ASME, 78(6), 061003, 2011. doi :10.1115/1.4002593 [17] A. Batou, C. Soize, M. Corus, Experimental identification of an uncertain computational dynamical model representing a family of structures, Computer and Structures, 89(13-14), 1440-1448, 2011. doi :10.1016/j.compstruc.2011.03.004 [18] A. Batou, C. Soize, Experimental identification of turbulent fluid forces applied to fuel assemblies using an uncertain model and fretting-wear estimation, Mechanical systems and Signal Processing, 23, 2141-2153, 2009. doi :10.1016/j.ymssp.2009.03.018 [19] A. Batou, C. Soize, Identification of stochastic loads applied to a non-linear dynamical system using an uncertain computational model and experimental responses, Computational Mechanics, 43, 559-571, 2009. doi :10.1007/s00466-008-0330-y
[20] A. Batou, C. Soize, Experimental identification of stochastic processes using an uncertain computational non-linear dynamical model, Journal of Physics : Conference Series 135, (1) 012014. doi :10.1088/1742-6596/135/1/012014 [21] C. Soize, A. Batou, Identification of stochastic loads applied to a non-linear dynamical system using an uncertain computational model, Mathematical Problems in Engineering, (Article number 181548), 1-16, 2008. doi :10.1155/2008/181548
Research projects 2009 2012 : Participation in the project "Réduction modale basée sur une séparation des modes structuraux globaux et locaux imbriqués en vibroacoustique numérique pour la réponse statistique basse et moyenne fréquence de systèmes complexes incertains. Application à l Avance de Phase en synthèse automobile", funded par PSA Peugeot-Citroën. 2009 2010 : Coordinator of the project "Construction of a probabilistic computational model representing a family of ISS motors". Partnership Project between EDF R&D and Université Paris-Est Marne-la-Vallée. 2010 : Coordinator of the project "Construction of a reduced-order model of fuel assemblies", funded by EDF R&D. 2011 2013 : Participation in the project TYCHE - Advanced methods using stochastic modeling in high dimension for uncertainty modeling, quantification and propagation in computational mechanics of solids and fluids, funded by "Agence Nationale de la Recherche" (programme blanc). Lead by C. Soize (Université Paris-Est Marne-la-Vallée) and with the additional participation of Institut de Recherche en Génie Civil et Mécanique (Ecole Centrale Nantes), Laboratoire d Informatique pour la Mécanique et les Sciences de l Ingénieur (CNRS) and Laboratoire de Mécanique des Sols, Structures et Matériau. 2012 2014 : Scientific responsible MSME in the project SICODYN - pour des SImulations crédibles via la COrrélation calcul-essai etl estimation d incertitudes en DYnamique des structures funded by FUI12/FEDER6. Lead by S. Audebert (EDF R&D) and with the additional participation of CETIM, LMT, FEMTO-ST, LAMCOS, NECS, Phimeca Engineering, SAMTECH France, SULZER Pompes France, VIBRATEC. 2013 2016 : Coordinator of the project "HiMoDe - Reduced order model for dynamical structures having a High Modal Density in the low frequency range", funded by "Agence Nationale de la Recherche" (programme Young Researchers). 2013 2014 : Participation in the Korea/France STAR project entitled "Uncertainty quantification for multibody dynamical systems" funded par the ministère des affaires étrangères / NRF. With the participation of University Paris-Est Marne-la-Vallée (A. Batou and Prof. C. Soize) and Hanyang University, Séoul ( C.K. Choi and Prof. H.H. Yoo). 2013 2016 : Participation in the project TURBODYNA - Robust modeling of the nonlinear dynamic mistuning of bladed disks, funded by ANR and DGA (ASTRID). Lead by E. Capiez-Lernout (MSME).
Student supervisions Ph.D. Students : 2010 2013 : Adrien Arnoux : "Reduced order models for low frequency dynamics of automotive vehicles". Co-direction (50 %) with C. Soize and L. Gagliardini (PSA). 2013 2016 : Olivier Ezvan : "Reduced order modeling for for large band dynamical analysis and uncertainty quantification". Co-direction (70 %) with C. Soize. Master Students : 2010 : Viet Dung Hoang : "Reduced order model for truss like structures in presence of numerous local elastic modes". 2010 : Van Hai Nguyen : "On the use of genetic algorithm for the identification of probabilistic model parameters in structural dynamics". 2011 : Hai Quan DO : "Analysis and comparison of substructuring methods". 2011 : Khanh Ngoc Nguyen : "Identification of the parameters of a probabilistic model of uncertainties of a rigid body using experimental responses". 2012 : Olivier Ezvan : "Analysis and comparison of dynamical condensation methods". 2012 : Benjamin Morin : "Interpolation of reduced order model in structural dynamics". 2013 : Oliver Ezvan : "Separation of small/medium/large-wavelengths elastic modes". 2014 : Déborah Lavazec (co-encadrement) : "New metamaterials for the attenuation of noise and vibration in civil engineering and transport". Bachelor Students : 2012 : Mehdi Belarbi : "Implementation of a user interface for the visualization of multibody system motions". 2013 : Eshan Coowar : "Implementation of a validation procedure for a FE software". 2013 : Antonin Dubois : "Construction of a multibody dynamical system of an hanging car motor".